QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress
 1584 QCAD (main)Bug ReportLow Modify > Divide: dividing polyline at node can lead to  ...Closed
100%
Task Description

- Divide attached polyline at 40,30
- Lower half contains zero length segment at 40,30

 1580 QCAD (main)Bug ReportLow Hatch origin point not saved / loaded correctly Closed
100%
Task Description

Create hatch
Set origin point of hatch pattern to custom coordinate
Save
Load

Hatch offset parameters are unchanged but visual appearance has changed

 1579 QCAD (main)Bug ReportLow Edit > Paste: rotation leads to wrong position of block ...Closed
100%
Task Description

Copy block reference in drawing with one unit (e.g. Inch).
Paste into drawing with other unit (e.g. Millimeter) using a rotation while pasting.

 1578 QCAD (main)Bug ReportLow Dimension scales with linear factors change after savin ...Closed
100%
Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?f=107&t=4593&p=17839#p17835

 1566 QCAD (main)Bug ReportLow Block > Attributes > Synchronize Attributes: deleted bl ...Closed
100%
1 Task Description

Deleted (undone) block attributes are stored to DXF/DWG.

 1561 QCAD (main)Bug ReportLow Edit > Drawing Preferences: menu missing (macOS, French ...Closed
100%
Task Description

Qt menu heuristic causes Edit > Drawing Preferences to disappear with French locale under macOS.

Edit > Application Preferences and Help > About are moved to erroneous locations as well.

 1559 QCAD (main)Bug ReportLow Font substitution in command line tools Closed
100%
Task Description

Font substitutions broken for many cases.
Font “Standard” can never be substituted.

 1557 QCAD (main)Bug ReportLow Zero length lines not shown Closed
100%
Task Description

Zero length lines are not shown in QCAD. For best compatibility these should be shown as dots.

 1554 QCAD (main)Bug ReportLow Auto focus of options toolbar when entering numbers bro ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4774

 1553 QCAD (main)Bug ReportLow Modify > Break out Manual: exception with circles Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4776

1552QCAD (main)Feature RequestLowLayers: assign different color for printingAssigned
0%
1 Task Description

Original request:

https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4768

 1550 QCAD (main)Bug ReportLow Block references: mirrored block references in 3rd part ...Closed
100%
Task Description

Files imported from other CAD applications might contain blocks that are mirrored if the block reference uses an inverted extrusion direction.

1549QCAD (main)Feature RequestLowSeparate Coordinate Display from Drawing DimensionsAssigned
0%
Task Description

Source:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4752

According to the changelog for version 3.9.3 the info tools and coordinate display are tied to the current drawing dimensions. For much of my use I prefer to have the dimensions format different. The main reason is that my customers want to see the format in fractions, but when I am drawing I’d rather see the decimal format to make sure what I am drawing is accurate. So I’d really be interested in seeing a separate full configuration of the display and info coordinates.

1542dwg2svgFeature RequestLowdwg2svg: add switch to show only given layer(s)Assigned
0%
Task Description

Implement a command line switch to only show a list of given layers for dwg2* command line tools.

1541QCAD (main)Feature RequestLowView > Zoom > Zoom In/Out: Make zoom factor configurabl...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

 1540 QCAD (main)Bug ReportLow Draw > Line > Parallel: Changing back to Auto has no ef ...Closed
100%
Task Description

Draw > Line > Parallel
- switch type to Line, XLine or Ray
- switch back to Auto
- Parallel is always line segment

 1537 QCAD (main)Feature RequestLow Draw > Shape: Add option to fill shape (add solid fill) Closed
100%
Task Description

Add an option to create a solid fill hatch for shape tools.

 1524 QCAD (main)Bug ReportLow Command line: cannot enter @ sign in command line on Ge ...Closed
100%
Task Description

@ sign cannot be entered into command line on German keyboards on which Alt-Q has to be pressed to enter @.

This is a Qt/Linux bug which interprets Alt-Q as part of a shortcut starting with Q.

Workaround: change shortcut of Reset tool from QQ to something else, not starting with Q.

 1523 QCAD (main)Bug ReportLow Draw > Hatch > Hatch from Segments: fails for circle in ...Closed
100%
Task Description

- Draw circle inside other circle
- Draw > Hatch > Hatch from Segments
- Click both circles
- Right-click

 1521 QCAD (main)Bug ReportLow Modify > Offset: fails in certain cases with short arcs Closed
100%
Task Description

Offset curve not trimmed / clipped correctly.

Offset distance: 2.5

 1520 QCAD (main)Bug ReportLow Modify > Rotate: rotating splines changes start/end tan ...Closed
100%
Task Description

- Create spline from fit points
- Rotate spline
- Spline shape changes due to erroneous start/end tangents

Similar problem when reversing spline from fit points.

 1519 QCAD (main)Bug ReportLow Ruler precision always zero Closed
100%
Task Description

Rulers show only whole numbers.

 1517 QCAD (main)Bug ReportLow Modify > Break out Segment: fails with closed polyline Closed
100%
1 Task Description

Occurs when breaking out segment from closed polyline with more than two intersecting entities.

This also affects the hatch from segments tool when used with closed polylines.

Example:
https://raw.githubusercontent.com/qcad/qcad/master/scripts/Modify/BreakOut/Tests/data/closed_polyline.dxf

 1514 QCAD (main)Bug ReportLow Block attributes: association with block reference lost ...Closed
100%
Task Description

Create block reference with attribute
Copy block reference and attribute
Paste

The copied attribute is now associated with the first block reference instead of the second.

 1513 QCAD (main)Bug ReportLow Layer > Create Layer from Selection: Layer created, sel ...Closed
100%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4583

 1509 QCAD (main)Bug ReportLow Ellipse / circle, ellipse / ellipse intersections Closed
100%
Task Description

Not all intersections points between ellipses and circles or other ellipses are found.
This is due to too tight tolerances.

See:
http://www.qcad.org/rsforum/viewtopic.php?f=76&t=4574

 1507 QCAD (main)TaskLow Improve arc rendering for screen-based linetypes Closed
100%
Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=73&t=4566

 1497 QCAD (main)Performance IssueLow Autosnap: hangs with very complex splines Closed
100%
Task Description

Splines with hundreds of control points or fit points can cause hangs when using auto snap near them.

 1484 QCAD (main)Feature RequestLow Dimensions: optionally use comma instead of dot Closed
100%
1 Task Description

Use comma to display dimension labels.

 1481 QCAD (main)Bug ReportLow Block List: update changes selected item Closed
100%
Task Description

- Select a block in the block list.
- Toggle the visibility of another block or add a block, etc.
- Selected block changes

 1480 QCAD (main)Feature RequestLow dwg2dwg: add command line switches to modify header var ...Closed
100%
Task Description

Add command line switches to dwg2dwg to change header variables during conversion (e.g. DIMASZ, DIMEXT, DIMTXT, ...)

 1479 QCAD (main)Bug ReportLow Modify > Explode: too many segments for splines with la ...Closed
100%
Task Description

Exploding splines creates more segments than necessary in some cases with very large tolerances.
The number of segments created should be the number of bezier spline segments times two.

 1476 QCAD (main)Bug ReportLow Draw > Circle > 2 Tangents and Radius: exception with a ...Closed
100%
Task Description

Draw > Circle > 2 Tangents and Radius
Choose two arcs or two circles as tangential entities.

 1458 QCAD (main)Bug ReportLow Draw > Polyline > From Segments: empty polyline created ...Closed
100%
Task Description

- Create four arc segments representing a full circle
- Create polyline from segments

Empty polyline is created (caused by simplification).

 1456 QCAD (main)Bug ReportLow Drag and drop: requires two clicks with auto snap Closed
100%
Task Description

Drag and drop requires two clicks with auto snap if grid snap and free snap are disabled for auto snap.
- Edit > Application Preferences > Snap > Auto Snap: disable grid and free
- Drag an entity and try to position it
- First click does nothing, second click positions entity

 1453 QCAD (main)Bug ReportLow Modify > Clip to Rectangle: exception when clipping poi ...Closed
100%
Task Description

- Create some points
- Modify > Clip to Rectangle
- Make sure some points are inside rectangle

→ Exception

1449QCAD (main)Feature RequestLowProperty Editor: show centroid of polylinesAssigned
0%
1 Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320

 1448 QCAD (main)Bug ReportLow Draw > Shape > Rectangle with Size: polygon option not  ...Closed
100%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4318

 1447 QCAD (main)Bug ReportLow Mouse cursors very small under Windows with high resolu ...Closed
100%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4310

1445QCAD (main)Bug ReportLowSwitching off grid scaling can break rulersAssigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4314

 1444 QCAD (main)Bug ReportLow Context menu: no entry to delete polyline node for firs ...Closed
100%
Task Description

Context menu does not show an entry to “Delete Node” for the first node of a polyline.

 1441 QCAD (main)Bug ReportLow Modify > Lengthen: unexpected behavior with polylines Closed
100%
Task Description

Modify > Lengthen with positive values can shorten the polyline in some cases.
See also:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4303

 1438 QCAD (main)Bug ReportLow MText with vertical alignment base saved with alignment ...Closed
100%
Task Description

Vertical alignment “base” (not supported for MText) is saved as “top”. Using “bottom” to replace “base” would be more appropriate.

 1436 QCAD (main)Bug ReportLow Block > Create Library Item: item does not have same un ...Closed
100%
Task Description

Library items created from existing drawings should have the same unit as the drawing. Currently, the unit of newly created library items is ‘None’.

 1434 QCAD (main)Bug ReportLow File > Print: print offset Closed
100%
Task Description

Prints under Windows are offset by the default printer margins.

This is caused by QTBUG-5363, https://bugreports.qt.io/browse/QTBUG-5363

 1433 QCAD (main)Bug ReportLow Cannot open file with erased layout Closed
100%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4269

 1432 QCAD (main)Bug ReportLow Wrong x scale for imported texts Closed
100%
Task Description

If text style has a text width (x scale) that is not 1, the property x scale from the text style is applied to all texts of that style.
See also:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4266

 1431 QCAD (main)Bug ReportLow Polyline pattern rendering Closed
100%
Task Description

Dots in line patterns along polylines with property “Polyline Pattern” set to “Yes” are rendered as horizontal lines.
See also:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4262

1430QCAD (main)Feature RequestLowModify > Round: one-click filletAssigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4256

 1429 QCAD (main)Bug ReportLow Command line calculator: functions containing number fo ...Closed
100%
Task Description

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=89&t=4235&start=15

Showing tasks 101 - 150 of 587 Page 3 of 12 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing