|
2220 | QCAD (main) | Bug Report | Low | (CU) Convert Drawing Unit (inch, mm etc) to None fails | Closed | |
|
Task Description
(CU) Convert Drawing Unit (inch, mm etc) to none fails with the message “Warning, Unit “None” selected. Nothing to be done”. In the same drawing I can change the Drawing Unit below “Drawing preferences/ Drawing Unit” to None without any problems.
|
|
2216 | QCAD (main) | Suggestion | Low | DIM modification cause overlapping text | Assigned | |
1 |
Task Description
When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.
|
|
2215 | QCAD (main) | Bug Report | Low | Rectangle area selection fails partly at Ordinate dim's | Closed | |
|
Task Description
Rectangle area selection doesn’t work on ALL Ordinate dim’s.
Related to? https://www.qcad.org/bugtracker/index.php?do=details&task_id=2214
|
|
2214 | QCAD (main) | Bug Report | Low | Rectangle area selection fails because Block reference ... | Closed | |
|
Task Description
A block selection in Model_Space with the rectangle area selection tool fails because the block reference is located at an unexpected location. If I catch by accident the reference point or do a simple mouse click selection it will work.
|
|
2205 | QCAD (main) | Bug Report | Low | Text rendering fails in certain zoom level | Waiting on fix in 3rd party library | |
1 |
Task Description
Case: Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level
Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.
|
|
2199 | QCAD (main) | Bug Report | Low | Polyline with segment widths: duplicate rendering as bl ... | Closed | |
|
Task Description
Block contains a polyline with customized width
Works flawless with 3.25.0
Reported by claudioarch https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8205
|
|
2197 | QCAD (main) | Feature Request | Low | Selection Filter: add properties Length and Area | Closed | |
1 |
Task Description
It would be nice if we could use the length of a polyline as a search criterion too.
Selection Filter, Property for Polyline, “Length” Comparison: same like Line?
Thanks.
|
|
2152 | QCAD (main) | Bug Report | Low | Status change for Visibility in Viewports fails | Closed | |
|
Task Description
Status change for Visibility is without any effect on Viewports in Paper_Space.
Case: Entities drawn on a layer in Model_Space. Visibility on/off works. Situation covered with a Viewport, placed in Paper_Space, Edit content launched for that Paper_Space, Visibility on/off doesn’t works.
It was properly working in previos QCAD versions ...
|
|
2142 | QCAD (main) | Bug Report | Low | Viewports: Cannot snap to reference points of circles / ... | Closed | |
|
Task Description
Reported by CVH
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7868
|
|
2134 | QCAD (main) | Bug Report | Low | Property Editor, Total Length result incorrect | Closed | |
|
Task Description
Case: Tested with the example drawing provided below: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=7776
If I select every single entity piece by piece with the mouse pointer the total length is correct. If I select everything in once with a rectangular or a polyline selection the total length is incorrect.
|
|
2123 | QCAD (main) | Bug Report | Low | File > Print: Crop marks not printed | Closed | |
|
Task Description
Crop marks in Paper_Space are only printed if a Viewport covers the crop mark position.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7651
|
|
2120 | QCAD (main) | Suggestion | Low | SH - Restrictions for orientation are not working | Closed | |
|
Task Description
Case: launch LI, launch for the first point SH, set to 5 distance, snap to a point, activate Auto snap, (which would work with SD for EH and EV but not for Alt) try to restrict orientation for second point with ALT, EH, EV - it won’t work in this scenario ...
Edit: Playing around ... could it be that RZ is not propperly set within those tools?
|
|
2102 | QCAD (main) | Bug Report | Low | Angular Dimension - fixed extension line option incompl ... | Closed | |
|
Task Description
The property editor offers for an Angular Dimension the option to make a fixed extension (yes/no) but the input field for a length is missing.
|
|
2099 | QCAD (main) | Bug Report | Low | DIM Label, Square Symbol doesn't adopt layer attributes | Assigned | |
|
Task Description
The square symbol offered as symbol in DIM label is the only symbol which doesn’t adopt the layer color. If I print a drawing in full color it leads to a black symbol in an otherwise colored dimension.
It is also the only symbol which has a solid filling what is confusing when you work with it in Model_Space ...
|
|
2094 | Translation | Bug Report | Low | Leader and Datum - Tool tip for "Undo Last Segment" | Closed | |
|
Task Description
Tools: Leader and Datum Tool tip for “Undo Last Segment” - Segment instead of Segement
|
|
2093 | QCAD (main) | Bug Report | Low | Datum tool, option bar, missing icon for "Undo Last Seg ... | Closed | |
|
Task Description
no task description |
|
2089 | QCAD (main) | Bug Report | Low | Property Editor: Linetype Scale and Draw Order wrongly ... | Closed | |
|
Task Description
Case:
Drawing unit = inch,
Dimension Label Format set to Engineering or Architectural,
|
|
2087 | QCAD (main) | Feature Request | Low | More options for "Paste along Entity" [PE] | Assigned | |
1 |
Task Description
“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.
Would be a nice time saver to have the same options for “Paste along Entity” too.
|
|
2081 | QCAD (main) | Bug Report | Low | Dimension label color at existing files will change to ... | Closed | |
|
Task Description
The new QCAD feature “dimension label color” will change the label color at existing drawings to “Custom”. In my opinion it should be by default “by Layer” until the user decide to change the color by him/herself.
|
|
2079 | QCAD/CAM | Bug Report | Low | Full screen mode (F11) - Menu / drop down menus not wor ... | Closed | |
|
Task Description
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7269
|
|
2077 | QCAD (main) | Bug Report | Low | Property Editor / Fixed Extension Line fails in certain ... | Closed | |
|
Task Description
If I edit a DIM regarding the fixed Extension Line Length it will fail if it has to be extended to meet the new length. Even it has failed - the Property Editor will provide from now on the new length as the “correct” value for the Extension Line Length.
Example drawing: Try to adjust the Extension Line Length to 50 ...
|
|
2073 | QCAD (main) | Bug Report | Low | Property Editor: Imperial Area info incorrect | Closed | |
|
Task Description
Drawing Unit: Inch Label Format: Architectural and Engineering
Note: Info tool calculation is correct.
|
|
2072 | QCAD (main) | Suggestion | Low | Inserted and flipped block mirrors text and dim | Assigned | |
|
Task Description
Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.
Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.
Version 3.23.0 doesn’t shows this behavior.
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206
|
|
2066 | QCAD (main) | Bug Report | Low | Text/Dim rendering issue for size and contrast | Closed | |
|
Task Description
Sorry - can’t give you a proper way to reproduce it .... it just happens.
Dimension Arrows shown with reduced contrast, zoom in/out can trigger it but not always, text hight jumps from “correct” to way to small to a kind of mixed size display, DIM preview fails often in size - probably depending on zoom factor ...
Snapshot Version: 3.24.3.4 Edit: Issue occurred first with version: 3.24.3.2
|
|
2061 | QCAD (main) | Bug Report | Low | Insert Library items fails to update relative zero poin ... | Closed | |
|
Task Description
To reproduce the issue: Insert a Library item from the Library browser and the RZ point will stay where it is.
|
|
2058 | QCAD (main) | Bug Report | Low | Modify > Move, Rotate, ...: "Use current layer and attr ... | Closed | |
|
Task Description
If I use the mentioned option and do an undo all entities will stay on the previously chosen target (current) Layer - the layer restoration fails.
Example: entities on layer x, current Layer y, select entities, Move/Copy MV, reference, drag to new position, Dialog option “Use current Layer and attributes” checked, OK, Undo
|
|
2056 | QCAD (main) | Feature Request | Low | Option Duplicate layer (yy) inclusive all sub-layers. | Assigned | |
|
Task Description
If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done. Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.
Current lack: Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.
With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ...
|
|
2040 | QCAD (main) | Feature Request | Low | Parallel and Offset tool - digit limit for Number to s ... | Closed | |
|
Task Description
LP - Number limit: 2 digits (max. 99)
LG - Number limit: 2 digits (max. 99)
OF - Number limit: 3 digits (max. 999)
OH - Number limit: 2 digits (max. 99)
Yes I know - it’s also a performance question but compared to ...
... Copy/Move (MV) next to infinite digits (max. ???)
... Paste Along Entity (PE) next to infinite digits (max. ???)
|
|
2029 | QCAD (main) | Bug Report | Very Low | Block order issue within drawing exchange between CE an ... | Closed | |
|
Task Description
If I create a dxf in Pro and open it in CE (or vice versa) the block order can change strange and a new Layout Block is occasionally added. Looks like dxf version (R15 etc.) doesn’t matters.
Versions: QCAD Pro 3.24.2.0 QCAD CE 3.24.0.0
|
|
2026 | QCAD (main) | Bug Report | Low | Modify > Clip to Rectangle: fails on blocks | Closed | |
|
Task Description
Clip to Area = deletes whole blocks Clear Area = deletes whole blocks Cut at Area Boundary = deletes whole blocks
It was working before e.g. in QCAD Version 3.18.0
|
|
2025 | QCAD/CAM | Bug Report | Low | Set Nesting Quantity shows wrong quantity | Closed | |
|
Task Description
If I set “Set Nesting Quantity” to e.g. 5 it will remember this number within the session. If I need to check which number I’ve used last time there is no way to find the actual used value - it will show me always 1. If I restart QCAD/CAM the value is completely lost and the nesting tool tries to fit in as much as possible into the sheet - regardless that the quantity number still shows one.
It would be nice to have a remember function even after restarting QCAD/CAM and have some kind of possibility to see the last used value.
|
|
2024 | QCAD/CAM | Bug Report | Low | CAM > Nesting: Nesting blocks with multiple parts fails | Closed | |
|
Task Description
Case: Nesting quantity all test: 3
Nesting block2 = works Nesting block1 = fails (placed outside sheet), Nesting both blocks = fails (placed partly outside sheet),
|
|
2020 | QCAD (main) | Bug Report | Low | Edit > Paste: Wrong position for block references with ... | Closed | |
|
Task Description
Open the example drawing, selected all, copy to clipboard, open new drawing, paste clipboard content with a scale of 1:1, check preview = everything ok, change scale to 1/10 etc., check preview = block references way of.
QCAD Pro Version 3.24.0.1
|
|
2019 | QCAD (main) | Bug Report | Low | Polyline with segment widths: uneven arc segments | Closed | |
|
Task Description
Example shows the effect on a ring (Menu → Draw → Ring)
|
|
2014 | QCAD (main) | Bug Report | Low | Focus on Options Toolbar fails | Assigned | |
|
Task Description
Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.
Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828
|
|
2013 | QCAD (main) | Bug Report | Low | Draw, Shape, Star - more options | Closed | |
|
Task Description
I like the new shape tool “Star”. Comes at the right time
Would be nice if we could get the same options like all other shape tools: “Create Polyline” and “Fill”.
|
|
2005 | QCAD (main) | Bug Report | Low | Missing dialog in Command Line for "Create Block from s ... | Closed | |
|
Task Description
Bugreport filled on behalf of John Hyslop / QCAD forum member.
If launching the Menu / Block / “Create Block from selection” tool the usually used Command Line dialog to prompt to the next required action is missing. The Status bar is properly calling for “Reference Point” etc.
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=6762
|
|
2001 | QCAD/CAM | Bug Report | Low | CAM > Nesting: Alignment fails | Closed | |
|
Task Description
Description for the CAM Nesting alignment:
Quote: Alignment: Parts are arranged with the chosen alignment in mind. An alignment of “Left - Bottom” means that parts are shuffled to the left (primary alignment) and towards the bottom (secondary alignment). Quote end
I tested a few scenarios. e.g a Top Left, Align → leads to a top right alignment, a Top left, Hull → leads to a Bottom Left alignment, etc.
|
|
2000 | QCAD/CAM | Bug Report | Low | CAM > Nesting: misleading "Sheet added" confirmation | Closed | |
|
Task Description
Within the nesting preparation: A left mouse click to add a sheet will always be confirmed with “Sheet added”, regardless of a proper selection or where the left click is done in Model_Space.
|
|
1995 | QCAD (main) | Bug Report | Low | Explode used on a bitmap will delete the bitmap | Closed | |
|
Task Description
1. If I use accidentally explode on a bitmap it will be deleted without a warning.
2. If I select an area with a selection rectangle as preparation for the “Clip to rectangle” tool all bitmaps within the selection are deleted - without a warning.
QCAD 3.23.0.5
|
|
1994 | QCAD (main) | Bug Report | Low | Explode used on Ray or Infinitive lines deletes the lin ... | Closed | |
|
Task Description
If I use accidentally explode on a ray or infinitive line the line will be deleted without a warning.
QCAD 3.23.0.5
|
|
1993 | QCAD (main) | Bug Report | Low | Draw > Insert Bitmap: relative zero point not set | Closed | |
|
Task Description
If I insert a bitmap the relative zero point (RZ) isn’t set at all. It will be set at the mouse position in the moment when I terminate the tool.
This leads among other things that I can’t use the Alt key for ortho mode or other tools for restrictions.
|
|
1991 | QCAD (main) | Bug Report | Low | Modify > Divide: Preview indicator fails on infinitive ... | Closed | |
|
Task Description
Case: Infinitive line, launch Divide (DI), click infinitive line
An orthogonal preview line should now indicates where the cut will happen when the next point is chosen. QCAD version 3.23.0.5 displays that indicator below a variable angle to the infinitive line. Regardless what it shows - the cut will happen orthogonal.
|
|
1988 | Translation | Bug Report | Low | Translation: "Automatisches Speichern" wird mit "Autosa ... | Closed | |
|
Task Description
QCAD Pro, Deutsche Benutzeroberfläche:
Kommando Zeilen Mitteilung: [13:35:12] Automatisches Speichern in: C:\Users\......xxx.dxf... [13:35:12] Autosave abgeschlossen.
Englische und Deutsche Benutzeroberfläche: Die angezeigten 3 Punkte nach dem xxx.dxf sind überflüssig da die Zeile nach dem dxf definitive endet.
|
|
1986 | QCAD (main) | Bug Report | Low | Page Tags set as default not displayed | Closed | |
|
Task Description
Cases:
1. QCAD default start drawing: Application Preferences, Page Tags enabled, Load new drawing (Menu/File/New), Launch Print Preview, Page Tags not displayed on print preview page, Check Drawing Preferences shows that Page Tags are still enabled, turn it off, turn it on, confirm with OK makes the Page Tags visible on the Print Page.
2. Customized start template drawing - saved as template with enabled Page Tags - same behavior.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6673
|
|
1980 | QCAD (main) | Bug Report | Low | Display, block position issue | Closed | |
|
Task Description
Drawing created with a previous QCAD version has issues to be correctly displayed in the current snapshot. e.g. drawing opened in QCAD 3.23.0 - works flawless. same drawing opened in QCAD 3.23.4 - has problems to show inserted blocks correctly.
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6660
|
|
1979 | QCAD (main) | Bug Report | Low | View > Layer List: icon spacing | Closed | |
|
Task Description
Snapshot 3.23.04
Spacing for symbols in layer list way to wide compared to previous versions.
Version 3.23.03 - Husky-2019.10.22-02.png Version 3.23.04 - Husky-2019.10.22-01.png
|
|
1977 | QCAD (main) | Feature Request | Low | Corresponding coordinate format | Assigned | |
1 |
Task Description
Hi,
It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.
This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.
Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).
|
|
1950 | QCAD (main) | Bug Report | Low | File > Save As: File dialog offers unsupported export f ... | Closed | |
|
Task Description
QCAD Pro fails to write R10, R9, R2.6, R2.5 dwg files. Younger types and dxf work as expected. Tested the issue back to QCAD 3.18 - no version is able to save those file types.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6620&p=24980#p24980
|
|
1944 | QCAD (main) | Bug Report | Low | Block toggle switch for visibility fails | Closed | |
|
Task Description
3.23.02 Block toggle switch for visibility fails. 3.23.0 Block toggle switch for visibility works.
|