|
839 | QCAD (main) | Feature Request | Low | Grid / Meta Grid info + Drawing Unit Info ... | Assigned | |
1 |
Task Description
At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings. It would be nice to have additional the Info for the drawing unit ...
|
|
601 | QCAD (main) | Feature Request | Low | Für Berechnungen neu zu erstellende Elemente Werte von ... | Assigned | |
|
Task Description
Es wäre schön wenn ich Werte wie zum Beispiel Längen von Linien direkt abgreifen könnte um diese weiter in Berechnungen verwenden zu können.
Beispiel: Ich habe eine Linie konstruiert wobei sich eine Länge y ergeben hat.
Nun möchte ich eine Linie zeichnen die 5 mal y sein soll.
Linientool → Wert 5* eingeben und y durch Auswahl mit der Maus von dem vorhandenen Elements übernehmen.
Natürlich könnte ich die Geometrie Info benutzen um den Wert abzulesen oder auch über die Zwischenablage zu benutzen. Ein abgreifen mit der Maus wäre aber schneller, direkter und wahrscheinlich auch mit weniger Fehlern (Human error) verbunden. Wahrscheinlich auch genauer da QCad, denke ich, mit mehr Nachkommastellen rechnet, oder?
|
|
2079 | QCAD/CAM | Bug Report | Low | Full screen mode (F11) - Menu / drop down menus not wor ... | Closed | |
|
Task Description
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=7269
|
|
2014 | QCAD (main) | Bug Report | Low | Focus on Options Toolbar fails | Assigned | |
|
Task Description
Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.
Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828
|
|
2450 | QCAD (main) | Bug Report | Low | Flip Block with Attributes horizontaly fails | Assigned | |
|
Task Description
A block with Attributes can’t be flipped (Option bar) horizontally. The Attributes will be rotated 180° instead of been mirrored. Other entities in the block flip correctly. Same block flipped vertically works as expected (Mirrored Attributes). Same block flipped with FH or MI works as expected. (Mirrored Attributes).
|
|
1950 | QCAD (main) | Bug Report | Low | File > Save As: File dialog offers unsupported export f ... | Closed | |
|
Task Description
QCAD Pro fails to write R10, R9, R2.6, R2.5 dwg files. Younger types and dxf work as expected. Tested the issue back to QCAD 3.18 - no version is able to save those file types.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6620&p=24980#p24980
|
|
1686 | QCAD (main) | Bug Report | Low | File > Print: Line scale in Viewport wrong if Model_Spa ... | Closed | |
|
Task Description
Case: Line / Lineweight 2mm Model_Space Print Preview off / previously used scale was 1:1 Viewport 1:10 Paper_Space Print Preview scale 1:1 I’ll use the Paper_Space for a print: Works as expected. A 2 mm Line will be printed in 2 mm
__
Line / Lineweight 2mm Model_Space Print Preview off / previously used scale was 1:10 (closed Preview will keep it in memory), Viewport 1:10 Paper_Space Print Preview scale 1:1 I’ll use the Paper_Space for a print: Works not as expected! The Model_Space Print scale is used for scaling the 2 mm Line in the Paper_Space/Viewport. The Line will be printed with a 20 mm wideness.
|
|
2123 | QCAD (main) | Bug Report | Low | File > Print: Crop marks not printed | Closed | |
|
Task Description
Crop marks in Paper_Space are only printed if a Viewport covers the crop mark position.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7651
|
|
1276 | QCAD (main) | Bug Report | Low | File > Print Preview: black/white, grayscale mode have ... | Closed | |
|
Task Description
Print Preview: Black and white/Greyscale mode doesn’t works on Text.
|
|
2441 | QCAD (main) | Bug Report | Low | File > Print Preview: auto fit to paper repeated when s ... | Closed | |
1 |
Task Description
Case: Launch Print preview (first time), confirm dialog “Auto fit drawing to paper?” with yes, change after that the scale, close Print Preview, launch Print Preview - the last chosen scale what should be remembered is overwritten by the Auto fit scale.
Note: The Auto fit scale stays persistent - even after reloading the drawing!
The option “Auto fit drawing to paper?” as a dialog occurs only the first time you use Print Preview - there is no way to change the chosen option later in a session or after reloading the drawing ...
|
|
1864 | QCAD (main) | Bug Report | Low | File > Print Current View: multiple pages printed | Closed | |
|
Task Description
Case: My last “Print preview” setting was “Multiple Pages” = 4 QCAD will remember this setting until I change it.
If I then - maybe days later - start a “Print current view” out of my drawing then QCAD will show me the current view on ONE page. Exactly what I expected. If I start the print QCAD will print on FOUR pages regarding to the last “Print preview” setting. Not what I was looking for ....
Now knowing what will happen I launch “Print current view”, see my current view on ONE page, launch the “Drawing preferences”, see that FOUR is the number for pages, doesn’t change anything and cancel the dialog. NOW I can see that FOUR pages are used for the current view print.
That is confusing and it would be nice to have somehow more control over this behavior.
|
|
840 | QCAD (main) | Feature Request | Low | File > New from Template: Remember last used folder | Closed | |
1 |
Task Description
Task: Drawing - New from Template ...
My Default Template Folder in “Application Preferences” is on F: (USB Port). QCAD depicts to C:/Programme/QCAD pro 3.1.2/libraries/templates (Yes - I started QCAD new after adjusting the default Folder)
|
|
2369 | QCAD (main) | Bug Report | Low | File > Menu Open and Import fails for pdf | Closed | |
|
Task Description
Command Open and Import fails for pdf
Forum report: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9332&p=37508#p37508
|
|
1891 | QCAD (main) | Bug Report | Low | File > Import: import fails | Closed | |
2 |
Task Description
I’m not able to import any dxf or dwg.
|
|
2366 | QCAD (main) | Bug Report | Low | File > Advanced SVG Export: not launching | Closed | |
|
Task Description
Exception when populating scale combo box
|
|
479 | QCAD (main) | Bug Report | Low | Fehler in der Textfunktion | Closed | |
|
Task Description
Textfuntion:
Rufe ich die Funktion “Text” auf und schreibe einen Text wird dieser unwiderruflich gelöscht bzw. durch einen vorherigen Text ersetzt wenn ich danach etwas im “Main Font” verändere. “Text Geometry” und “Alignment” funktioniert.
|
|
951 | QCAD (main) | Feature Request | Low | Extra Option for Block attributes ... | Assigned | |
1 |
Task Description
It would be nice to have the possibility to control the automatic Text orientation in Block attributes. Something what would work like the DIM restriction: I can read the text horizontal and/or from the right side of the drawing sheet.
Right now I have the feeling that the Text orientation is dependent on the tool what I even use. Different tools = different outcomes.
|
|
1994 | QCAD (main) | Bug Report | Low | Explode used on Ray or Infinitive lines deletes the lin ... | Closed | |
|
Task Description
If I use accidentally explode on a ray or infinitive line the line will be deleted without a warning.
QCAD 3.23.0.5
|
|
1995 | QCAD (main) | Bug Report | Low | Explode used on a bitmap will delete the bitmap | Closed | |
|
Task Description
1. If I use accidentally explode on a bitmap it will be deleted without a warning.
2. If I select an area with a selection rectangle as preparation for the “Clip to rectangle” tool all bitmaps within the selection are deleted - without a warning.
QCAD 3.23.0.5
|
|
2480 | QCAD (main) | Feature Request | Low | Edit block in-place (BB) can't be terminated with Esc o ... | Closed | |
|
Task Description
Despite the toolbar “Cancel” option it would be nice if we could terminate BB also with an “Esc” or “QQ” keystroke like every other tool.
|
|
2020 | QCAD (main) | Bug Report | Low | Edit > Paste: Wrong position for block references with ... | Closed | |
|
Task Description
Open the example drawing, selected all, copy to clipboard, open new drawing, paste clipboard content with a scale of 1:1, check preview = everything ok, change scale to 1/10 etc., check preview = block references way of.
QCAD Pro Version 3.24.0.1
|
|
1791 | QCAD (main) | Bug Report | Low | Edit > Paste: relative zero point not set | Closed | |
|
Task Description
If I insert a content from the Clipboard to the drawing a new Relative Zero Point isn’t created. I’m not able to use e.g. a restriction regarding to the last inserted content. QCAD will use the last Relative Zero Point in the drawing even if I already inserted a content.
Screenshot: Clipboard content = circle
1. First insert
Restriction horizontal
2. Second insert
|
|
1085 | QCAD (main) | Bug Report | Low | Edit > Cut/Copy with Reference: cannot use snap to coor ... | Closed | |
|
Task Description
If I use the Copy/Cut with Reference Clipboard function I can’t use the “Coordinate” or “Polar coordinate” snap to determine the reference point. I have the feeling that just the option box isn’t shown ....
|
|
1617 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: Views in view list not con ... | Closed | |
|
Task Description
Case: Drawing in mm with Entries in the View List, Convert (CU) drawing from mm to inch, View List still exist but has lost the coordinates for each defined window,
|
|
1616 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: leader arrow switched off | Closed | |
|
Task Description
Case: Existing Leader with Arrow status “yes” in drawing, launch “Convert Drawing Unit”, convert drawing unit, Leader status for Arrow “yes” is now changed to “no”,
|
|
2322 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: dimension problem | Closed | |
|
Task Description
If I convert to an other unit it will only change the unit name - no dim (Existing or new) is calculated regarding to the new unit.
|
|
1654 | QCAD (main) | Feature Request | Low | Edit > Convert Drawing Unit: convert viewports | Closed | |
|
Task Description
Converting the Drawing unit (CU) in Model Space will ruin all preexisting Viewport arrangements in your Layout Block. You have to rebuilt them from stretch or undo the unit conversion.
|
|
2410 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Graphics View > Fonts: ... | Closed | |
2 |
Task Description
Edit: And it fails often to read the menu at all at the first time. A second try will display the information ...
|
|
1669 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Defaults for New Drawi ... | Closed | |
|
Task Description
Blank QCAD template used as the start drawing.
Application Preferences / Dimension Settings
Text hight doesn’t accept anymore input 3.5/25.4 and it will change that in a new drawing to “0” instead to show 0.137795
If I remember correctly: Marked for “Keep proportions” = unchecked in new drawing is desired behavior, correct?
|
|
2325 | QCAD (main) | Bug Report | Low | dwg file crashes QCAD | Assigned | |
|
Task Description
Regarding to forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8982&p=35836#p35836
dwg loaded in 3.27.1 frees QCAD (no response) and a Win10 PC. Same drawing loaded in 3.26.0 causes no problems. It looks to me that two hatches (handle 198b6, 198ba) are the culprits. Drawing saved without those hatches opens without any problem in 3.27.1.
TECNOFLEX symbol library.dwg = original file from forum post TECNOFLEX symbol library_mod.dwg = my modification
|
|
2013 | QCAD (main) | Bug Report | Low | Draw, Shape, Star - more options | Closed | |
|
Task Description
I like the new shape tool “Star”. Comes at the right time
Would be nice if we could get the same options like all other shape tools: “Create Polyline” and “Fill”.
|
|
1809 | QCAD (main) | Bug Report | Low | Draw > Viewport > Add Viewport: layout dialog combobox ... | Closed | |
|
Task Description
Drawing with more than 4 Layout Blocks (Layout1, Layout2 etc),
Add Viewport, choose rectangle for viewport, Dialog pops up to choose a Layout Block, I choose Layout4 - the Viewport is placed on Layout2,
next new Viewport - placed on Layout3 - the Viewport will be placed again on Layout2 ...
|
|
1028 | QCAD (main) | Bug Report | Low | Draw > Line > Rectangle with Size: options toolbar layo ... | Closed | |
|
Task Description
... just cosmetic!
Rectangle with size: The option box “Reference Point” is a bit to small to show the whole text of the chosen option.
English / German = same behavior.
|
|
1993 | QCAD (main) | Bug Report | Low | Draw > Insert Bitmap: relative zero point not set | Closed | |
|
Task Description
If I insert a bitmap the relative zero point (RZ) isn’t set at all. It will be set at the mouse position in the moment when I terminate the tool.
This leads among other things that I can’t use the Alt key for ortho mode or other tools for restrictions.
|
|
2436 | QCAD (main) | Feature Request | Low | Draw > Hatch > Hatch from Segments: mark position of op... | Assigned | |
1 |
Task Description
Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.
Same scenario tested with “Hatch from Selection” (HA) ... ... everything works like a charm
|
|
1326 | QCAD (main) | Bug Report | Low | Draw > Circle > 2 Tangents and Radius: not all solution ... | Closed | |
|
Task Description
If I try to draw a circle between two little circles with a radius (e.g.) of 3000 the tool shows me only two possibility’s - but there are much more. If I make a counter test with the tool “2 Tangents with Point” all possibility’s are correct shown.
first pic “2 Tangents with Point” correct,
second pic “2 Tangents + Radius” incorrect,
|
|
740 | QCAD (main) | Bug Report | Low | Draw - Arc - Two Points and Radius: wrong console outpu ... | Closed | |
|
Task Description
XP/32 QCAD 3.0.5
... after picking the first Point a wrong message appears what says: “Warning: The two points are identical”
|
|
972 | QCAD (main) | Feature Request | Low | Distribute equally option ... | Assigned | |
6 |
Task Description
It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.
|
|
936 | QCAD (main) | Feature Request | Low | Disproportional scaling of block references | Assigned | |
|
Task Description
XP/32
... doesn’t works proper at circles and ellipses.
Circles: the scale works only proportional even though I have the options for x and y. Ellipses: The same but if I play around with the x, y fields it will freeze the scale possibility.
|
|
1980 | QCAD (main) | Bug Report | Low | Display, block position issue | Closed | |
|
Task Description
Drawing created with a previous QCAD version has issues to be correctly displayed in the current snapshot. e.g. drawing opened in QCAD 3.23.0 - works flawless. same drawing opened in QCAD 3.23.4 - has problems to show inserted blocks correctly.
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6660
|
|
756 | QCAD (main) | Bug Report | Low | Display problem in the Text "Character Map" ... | Assigned | |
1 |
Task Description
XP/32
Go to: Text → Special Characters → Others → “Character Map” pops up. Adjust Zoom to 100% = display problem (not enough space for the single character.
|
|
1677 | QCAD (main) | Bug Report | Low | Dimension: Scale option grayed out in model space | Closed | |
|
Task Description
... impossible to chose a scale in the DIM option bar.
|
|
1672 | QCAD (main) | Bug Report | Low | Dimension tool displays wrong meassurement | Closed | |
|
Task Description
Case: Settings are: General: Drawing Unit Drawing Unit: Foot Paper Unit: Inch Measurement System: Imperial
Dimension Settings: Architectural
Issue:
I draw a horizontal line 12 units (foot) long, Use then the Horizontal DIM tool and it will display a measurement of 1’ = false,
I draw a horizontal line of 2 units (foot)long, Use then the Horizontal DIM tool and it will display a measurement of 2” = false,
I assume the input for the line length is handled from the DIM tool as inch and not as feet.
|
|
862 | QCAD (main) | Bug Report | Low | Dimension settings - "Keep proportion" setting can't be ... | Closed | |
|
Task Description
XP 32/ QCAD 3.1.6
Drawing Preferences - Dimension settings - “Keep proportion” setting changes will not be saved with the Drawing.
Maybe you have to try it a couple times with the same drawing
|
|
790 | QCAD (main) | Feature Request | Low | Dimension Setting - Extension Line - total length setti ... | Closed | |
|
Task Description
It would be nice to have the option for a “Short” Extension Line. This is often used in Architectural drawings. Yes, I know that I can explode a dimension and change it to that what I’m asking for - but that is really a Sisyphus task and destructs the function of a dynamic Dimension in QCAD.
|
|
751 | QCAD (main) | Bug Report | Low | Dimension Leader: Arrow attribute | Closed | |
|
Task Description
XP/32 QCAD 3.0.0
If I try to change the Attributes of a dim leader it doesn’t works.
Leader → Option Arrow head - marked or not - no impact - always with arrow,
Property editor: Geometry of leader, Arrow: yes or no - doesn’t changed anything, Vertex: Index Number doesn’t change anything,
|
|
2081 | QCAD (main) | Bug Report | Low | Dimension label color at existing files will change to ... | Closed | |
|
Task Description
The new QCAD feature “dimension label color” will change the label color at existing drawings to “Custom”. In my opinion it should be by default “by Layer” until the user decide to change the color by him/herself.
|
|
1653 | QCAD (main) | Bug Report | Low | Dimension font configuration only loaded if drawing con ... | Closed | |
|
Task Description
This bugs me since a long time but I wasn’t able to reproduce it ..... till now!
My Dim Label font for new drawings (Application Preferences) is set to “Helvetica-Bold” Basically it was working just fine for new drawings but from time to time, after saving and reopen my drawing, the font was lost and replaced by “Standard”. No idea why!
Today I was playing with the new QCAD Feature “Default Template” and learned that I loose all the time my preselected font. QCAD ignores that my Template “Drawing Preferences” and also the “Application Preferences” are set to “Helvetica-Bold”. It will be replaced by “Standard”. Annoying!
Ok, question was why it doesn’t happened with all drawings, all the time? After many tests .... The “old” blank Template opens with the correct font setting. If I use a Dim in the drawing and save it everything works as expected. If I save the drawing without a Dim in it then the preselected Font will be replaced by “Standard”. It happens also if I delete all Dims in a so far proper working drawing - save and reopen it leads to the same issue. The Font will be replaced by “Standard”.
The new feature “your own Default Template” will not work regarding the Dim Label font in any cases - the template itself needs at least one Dim in the drawing to keep the desired Font.
|
|
2280 | QCAD (main) | Bug Report | Low | Dimension arrows not filled | Closed | |
|
Task Description
Version QCAD 3.26.4.7 / Windows x86_64
Existing drawing:
1. e.g. flange.dxf loads with no fills (solid hatch) for arrows, 2. New dimension are also without arrow fills. 3. This existing drawing has Text above line! Setting Drawing Preferences / Dim to “Horizontal text labels” will alter Text to be Horizontal BUT also open a gap for the text which is a separate setting (Text above dimension Line). Undo doesn’t works on this properly - used multiple times will even change the dim color which wasn’t changed in this operation.
New drawing:
1. Same test scenario - same issue. 2. Dim settings = Horizontal text Labels ticked, Text above dimension Line ticked produces a dim horizontal orientated with a gap instead to put the text above the line
|
|
757 | QCAD (main) | Feature Request | Low | Dim: Architectural tick and Leader Arrow size independe... | Assigned | |
1 |
Task Description
Leader Arrow size and the Architectural tick size are controlled by one and the same value.
It would be nice to get the possibility to adjust them independently from each other ...
|