|
981 | QCAD (main) | Feature Request | Low | New tool: Ellipse - Equidistant | Closed | |
1 |
Task Description
Bug or Feature request?
Tool “Parallel” is not working on an intact ellipse. If I explode the ellipse it will work but then it turns out to a Sisyphus task ...
|
|
1539 | QCAD (main) | Feature Request | Low | One more "Offset" option: Infinitive Line ... | Closed | |
1 |
Task Description
hi,
I miss one Offset option to use an offset indirectly related to the used entity. Right now I have to work with further construction lines and trim, divide, delete etc. tools to archive what I need. Basically an offset as a ray would be enough but unfortunately we have no control of the Ray orientation. This said - it would be nice to have an infinitive line added to the “Offset Polyline Segment” option to be able to use an Offset as construction line which is not only reflecting the shape of the source.
|
|
866 | QCAD (main) | Feature Request | Low | Paste block reference: add third option to rename paste... | Assigned | |
1 |
Task Description
Scenario:
Drawing 1: Blockname X is part of a selection, I copy this selection into the clipboard to use it in an other drawing.
Switch to Drawing 2, this drawing has also a Blockname X but with a different content.
Use the clipboard paste function - the clipboard content will be modified (only the Block) by the drawing 2 block content.
No warning pops up - it just happens!
|
|
2390 | QCAD (main) | Feature Request | Low | Please add U.S. Survey Feet to the Unit / convert list | Assigned | |
1 |
Task Description
Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245
|
|
922 | QCAD (main) | Feature Request | Low | Possibility to control the order in the Property editor... | Assigned | |
1 |
Task Description
It would be nice and helpful if we had the possibility to control the order of Attributes - shown in the property editor. I found a solution for myself with using numbers in the Attribute definition tag - but that isn’t really a nice solution. If I could hide my numbering ... everything would be fine for me ....
|
|
2397 | QCAD (main) | Bug Report | Low | Post processor "LaserGBRL (offset) [mm] fails at tabs | Assigned | |
1 |
Task Description
Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.
Forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495
|
|
1577 | QCAD (main) | Feature Request | Low | Postfix for DIM / Remember last DIM Label ... | Assigned | |
1 |
Task Description
Hi,
unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.
May I ask for an additional Postfix option or/and a remember functionality of those fields?
|
|
1125 | QCAD (main) | Feature Request | Low | Property Editor / Total angle of an arc | Closed | |
1 |
Task Description
Hi,
if I have an arc and use the Property Editor to get the Geometrical information I always miss the total angle of the arc.
Yes - I have the Start and the End angle but to get the Total angle I have to draw construction lines to be able to use the Angular Dim or Info angle tool /or I need to use a pocket calculator ...
It would be nice to have this calculated by QCAD - I assume it can’t be that difficult to design an extra field which will display, based on the start and end angle, the total angle of an arc.
What do you think?
|
|
1027 | QCAD (main) | Feature Request | Low | Rectangle with a 3 point determination ... | Assigned | |
1 |
Task Description
Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.
We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.
My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.
1. First point: start
2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle
3. third point: determination second side (height?)
I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...
|
|
2301 | QCAD (main) | Feature Request | Low | Rotate preview on/off | Assigned | |
1 |
Task Description
Hi,
I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.
It would be nice to have an option to turn this preview on/off.
|
|
2434 | QCAD (main) | Bug Report | Low | Rotate Viewport fails | Closed | |
1 |
Task Description
Rotating a Viewport will lead to rotate the drawing in the viewport but not the Viewport itself. This will happen during a creation process by using VT or afterward by editing a viewport in the Property Editor.
|
|
1793 | QCAD (main) | Bug Report | Low | Ruler functionality is compromised by Auto Grid setting | Closed | |
1 |
Task Description
Regarding to an observation by the forum member Horst1803 http://www.qcad.org/rsforum/viewtopic.php?f=92&t=5725
The ruler functionality is compromised by Graphics View / Grid settings. To show the full Ruler functionality “Automatic scale grid” has to be activated. I think that is not intended behavior.
Case: Appearance / Show rulers = activated
Application Preferences / Graphics View / Grid
on - Automatically scale grid on - Automatically scale meta grid off - Solid grid lines = Rulers visible = Graduation visible = Labels visible
off - Automatically scale grid on - Automatically scale meta grid off - Solid grid lines = Rulers visible = Graduation invisible = Labels invisible
|
|
1087 | QCAD (main) | Bug Report | Low | Ruler ticks are not corresponding to the grid points | Assigned | |
1 |
Task Description
Ruler ticks are not corresponding to the grid points, Ruler will completely disappear at a certain zoom level,
Settings: Drawing unit: inch, Grid settings: Grid 1, Meta Grid 12, Dim Label Format: “Engineering, 0’-0.0”
see topic below: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014
|
|
2197 | QCAD (main) | Feature Request | Low | Selection Filter: add properties Length and Area | Closed | |
1 |
Task Description
It would be nice if we could use the length of a polyline as a search criterion too.
Selection Filter, Property for Polyline, “Length” Comparison: same like Line?
Thanks.
|
|
367 | QCAD (main) | Feature Request | Low | Snap "Reference" also for an arc ... | Closed | |
1 |
Task Description
The Snap “Reference” is perfect working on circles.
I would be nice to have this function also on Arc’s. There are many necessities to attach a Horizontal or Vertical line on an arc or an “ex circle” (circle after a cut,)rounds etc. in a professional drawing.
|
|
864 | QCAD (main) | Bug Report | Low | Template Preview/Info doesn't shows the sheet orientati... | Assigned | |
1 |
Task Description
“Create New Drawing from Template” Browser can’t readout the Page orientation ...
|
|
2205 | QCAD (main) | Bug Report | Low | Text rendering fails in certain zoom level | Waiting on fix in 3rd party library | |
1 |
Task Description
Case: Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level
Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.
|
|
596 | QCAD (main) | Feature Request | Low | Tool "Lengthen" mit "Total" erweitern oder .... | Assigned | |
1 |
Task Description
Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.
Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.
Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.
Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel
|
|
1819 | QCAD (main) | Feature Request | Low | Additional Options for "Paste along Entity" | Closed | |
|
Task Description
Please see:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22098#p22098
|
|
1459 | QCAD (main) | Bug Report | Very Low | File > Revert: changes grid appearance | Closed | |
|
Task Description
... even if it wasn’t used in the saved drawing.
|
|
1870 | QCAD (main) | Feature Request | Low | Stretch tool / option to turn selection restriction on... | Assigned | |
|
Task Description
Hi,
since 3.19.2 the Stretch tool looks for any selection and follows the specification “Only stretch selected entities if there is a selection”.
That is a nice feature but it leads many times to confusing because I have to deselect a selection just because I need to use the stretch tool on something else on the fly. The same if I “forgot” a selection outside of my zoom which is still important for me. The stretch tool just won’t work without any message why not. My routine now is that I terminate every selection just before I use the stretch tool just not to be surprised by “why isn’t it working”?
It would be nice to have in the Stretch option bar a checkbox to turn the “only selection feature” on or off. QCAD should remember that setting.
|
|
1378 | QCAD (main) | Bug Report | Low | Wrong value separator accepted and accomplished | Closed | |
|
Task Description
My settings for Coordinate Format: Decimal Point = Dot
Accidentally using a comma instead of a dot in a value field leads to a wrong result without any warning.
Test:
Using the “Rectangle with Size” tool accidentally with a comma will not trigger a warning (red text) and it will draw a wrong sized rectangle. It seems to me that QCAD is using the after comma value to draw this rectangle. Given value 30,5 by 50,7 leads to a rectangle 5 by 7 Crazy values like 1.,.35 by 71.,.75 are also accepted and leads to a rectangle size of 35 by 75 without any warning. A crazy value like 71.,..75 will finally trigger a red text warning!
Counter test horiz. Line: Value 100,25 leads to a line with 25 in length. Value 100.25 leads to a line with 100.25 in length.
Using the same tools with the correct separator will work as expected!
Same game with most of all other tools which are asking for a given value. No warning at all - just wrongly accomplished.
|
|
863 | QCAD (main) | Bug Report | Low | "Auto Zoom" is aligned also on invisible blocks ... | Closed | |
|
Task Description
If I switch a Block to invisible and use then the “Auto Zoom” in my drawing - the zoom cutout will appear like the block would still be visible
Attachment: 1. “Auto Zoom” (Z, A) / Visible Block 2. “Auto Zoom” (Z, A) / Invisible Block
|
|
1260 | QCAD (main) | Bug Report | Low | "Break out segment" again arc is not a sharp cut to the ... | Closed | |
|
Task Description
Break out segment / Auto trim again arc is not a sharp cut to the arc (to long or to short), Break out manual can’t snap to a line/arc intersection,
|
|
860 | QCAD (main) | Feature Request | Low | "Create Library item from selection" default Path ... | Assigned | |
|
Task Description
Default Path for “Create Library item from selection” / “Save us” is C:\Programme\QCAD pro 3.1.6 ... ... regardless of the settings in the “Application Preferences / Library Browser / for Library Sources. And QCAD doesn’t remember the last path choice ....
If I have to save 50 Library Items I have to navigate 50 times thru my system to find - the same place.
It would be nice if QCAD would point in first place to the Library Source or, at least, remember the last used path ...
|
|
369 | QCAD (main) | Bug Report | Medium | "Edit Text" Function fails ... | Closed | |
|
Task Description
3 RC1b
Trying to edit a Text calls the Qt Script Debugger with following Message:
Uncaught exception at C:/Programme/QCAD 3rc1b/scripts/Draw/Text\TextDialog/TextDialog.js:170: ReferenceError: Can’t find variable: simpleText 170 simpleText.checked = textDataIn.isSimple();
I’m able to close the Script Debugger but I can’t edit the Text ....
|
|
1522 | QCAD (main) | Bug Report | Low | "Hatch from Segments" problem with polylines ... | Closed | |
|
Task Description
I tried to hatch an area and the Reference Manual said all entities can be used but it doesn’t works at my example. Did I missed something?
The test drawing shows at the top the goal with exploded polylines. At the bottom I have rectangles (Polylines, drawn with the Rectangle tool) what is unfortunately not working.
|
|
1527 | QCAD (main) | Suggestion | Low | "Zeichnungseinheit konvertieren" translation missing .. ... | Closed | |
|
Task Description
... for the Option bar.
|
|
2220 | QCAD (main) | Bug Report | Low | (CU) Convert Drawing Unit (inch, mm etc) to None fails | Closed | |
|
Task Description
(CU) Convert Drawing Unit (inch, mm etc) to none fails with the message “Warning, Unit “None” selected. Nothing to be done”. In the same drawing I can change the Drawing Unit below “Drawing preferences/ Drawing Unit” to None without any problems.
|
|
1188 | Translation | Bug Report | Low | A few missing translations for the German Interface | Closed | |
|
Task Description
“Paste Along Entity”
- Menü/Bearbeiten, - Applikationseinstellungen/Werkzeugeinstellungen, - QCAD Benutzerreferenz/Bearbeiten, - Werkzeugleisten/Symbol, Alt text,
“Recent files history size” Applikationseinstellungen/Zuletzt geöffnete Dateien
“Default lineweight for new layers” Applikationseinstellungen/Layer/Layer hinzufügen
“Hide internal blocks” Applikationseinstellungen/Widgets/Blockliste
|
|
1629 | QCAD (main) | Feature Request | Low | Add additional Option to Angelur DIM Tool | Assigned | |
|
Task Description
Please see:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956
|
|
680 | QCAD (main) | Feature Request | Low | Additional Export function for Sketchup etc. .... | Assigned | |
|
Task Description
Additional Export function for export/import into 3D Programs like Sketchup etc. (file types like .dae, .3ds, .ddf, .skp).
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2176
|
|
746 | QCAD (main) | Feature Request | Low | Additional projection tools: dimetric, parallel, persp ... | Closed | |
|
Task Description
We have already a powerful projection tool in QCAD - the Isometric tool.
It would be nice to have additional a “Dimetric tool” (Ratio 1:0.5:1, Angle 7°/42°) what is often used in the “Engineering world”. It looks just more professional than the simple Isometric Projections and I’m pretty sure that could open a couple more Customer doors
|
|
2449 | QCAD (main) | Bug Report | Low | Adjusted Alfa value for solid hatch not saved with draw ... | Closed | |
|
Task Description
Tested on CE and Pro. Alfa value on load is always 255 ...
Please refer also to topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9800
|
|
743 | QCAD (main) | Feature Request | Low | After editing a Block back to the last window opening i ... | Closed | |
|
Task Description
Case: Working on a Main Drawing, decide to edit a Block, start the editing process, close the editing process with “Return to Main drawing” and come back to the Main Drawing - but unfortunately to an absolute different View in the Main Drawing ...
It would be nice to come back to the same View (Zoom window) like before I started the editing procedure.
|
|
2546 | QCAD (main) | Bug Report | Low | After unit change "Autofit drawing to page" - fails | Closed | |
|
Task Description
Hi,
tested with back_plate.dxf (QCAD Tutorial Example)
Drawing is original mm, metric, A4. Printprewiew works, Autofit Drawing to page etc. works as expected!
In Drawing Preferences: Changed settings to inch, imperial, Ansi A Printpreview works but options like “Autofit Drawing to page” and “Autofit pages to drawing” are not working as usual ...
Went back to mm etc - everything works again as expected.
|
|
2102 | QCAD (main) | Bug Report | Low | Angular Dimension - fixed extension line option incompl ... | Closed | |
|
Task Description
The property editor offers for an Angular Dimension the option to make a fixed extension (yes/no) but the input field for a length is missing.
|
|
1804 | QCAD (main) | Bug Report | Very Low | Application Preferences > Tool Settings: Filter for "Vi ... | Closed | |
|
Task Description
1. Search the Tool Settings for “View” and you will only find “Overlays” without the submenu information. 2. Check View manually without a search will provide the submenu information.
|
|
2437 | QCAD (main) | Bug Report | Low | Application Preferences, Graphics View, Fonts, Font siz ... | Closed | |
|
Task Description
no task description |
|
1148 | Translation | Bug Report | Low | Äquidistante: "Polyline" instead of "Polzlinie" | Closed | |
|
Task Description
Äquidistante: Spelling correction: “Polyline” instead of “Polzlinie” ...
|
|
2409 | QCAD (main) | Bug Report | Low | Area measurement of hatches leads to a crash of QCAD | Closed | |
|
Task Description
Reported in the QCAD Forum by TSG on a macOS Catalina system. Details on this topic can be found at https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9603#p38738.
|
|
553 | QCAD (main) | Bug Report | Low | Auswahlbox ignoriert bestimmte Bemaßungen mit geänderte ... | Closed | |
|
Task Description
Ziehe ich mit der Maus eine normale Auswahlbox wird bestimmte (nicht alle) Bemaßungen ignoriert welche geänderte Label haben. In meinem Fall z.B. <>” (reality check)
|
|
554 | QCAD (main) | Feature Request | Low | Auswahlbox sollte auch mit der Shift Taste Bereiche dem... | Assigned | |
|
Task Description
Ziehe ich mit der Maus eine normale Auswahlbox kann ich Elemente markieren. Möchte ich einzelne Bereiche wieder herausnehmen muss ich alle Elemente einzeln anklicken (mit gedrückter Shift Taste). Ich kann zwar dies komfortabler gestalten mit der Select → (De -) Select Contour Funktion welche aber erst über das Menue aufgerufen werden muss.
So wie ich einzelne Elemente mit der Maus auswählen und mit der Shift-Maus Funktion deselektieren kann wäre es schön wenn die Shift Taste auch bei Auswahlbereichen direkt zum deselektieren eingesetzt werden könnte.
|
|
846 | QCAD (main) | Bug Report | Low | Auto Trim at an arc ... | Closed | |
|
Task Description
If I have to “Auto trim” a line between to construction (or what ever ) lines the Auto Trim function works as expected!
If I use the same constellation with an arc the Auto trim function will give me an uncontrolled, unexpected result
|
|
1301 | QCAD (main) | Bug Report | Very Low | Auto Zoom includes invisible Blocks | Closed | |
|
Task Description
Open drawing and Auto Zoom will also use invisible Blocks for the displayed Zoom Factor.
|
|
417 | QCAD (main) | Feature Request | Low | Autosave Dateinamen Nummer ersetzten mit Datum. | Closed | |
|
Task Description
Wenn ich das Autosave System richtig verstanden habe funktioniert es so:
Nach Ablauf der eingestellten Zeit wird eine Datei mit Nummer im angegebenen Zielordner abgelegt. Diese Nummer ist weder fortlaufend noch sicher auf- oder absteigend - also keinerlei Hinweis im Dateinamen für den Anwender welches nun die letzte Sicherung ist. Ziel scheint zu sein das man eine Sicherung pro Tag hat, richtig?
Allerdings ist die Anzahl der Sicherungen pro Tag abhängig von der Anzahl der neu gestarteten QCAD Sitzungen. Starte ich das Programm einmal für den ganzen Tag habe ich eine einzige Sicherung von jeder bearbeiteten Zeichnung. Sicherungen haben dann die selbe Nummer und werden deshalb jeweils überschrieben.
Starte ich das Programm 10 mal pro Tag habe ich 10 Sicherungen (vorausgesetzt ich bearbeite die selbe Zeichnung in jeder Sitzung) mit unterschiedlichen und nicht in Reihe laufenden Nummern. Sicherungen können somit nicht überschrieben werden und am ende des Tages könnten leicht zig wenn nicht hunderte Sicherungen gespeichert sein.
Würde nun diese Nummer im Dateinamen ersetzt mit dem aktuellen Datum habe ich eine Sicherung pro Tag unabhängig wie oft ich QCAD an diesem Tag gestartet habe. Zudem kann der Anwender gleich den Sicherungstag im Dateinamen erkennen und muss sich nicht durch die “geändert am” Info sekundengenau kämpfen.
Macht das Sinn?
|
|
1889 | Documentation | Bug Report | Low | Autosave fails for QCAD original cxf font location | Closed | |
|
Task Description
Now I try the third time to post this .... .... deleted by “wrong token”??????? However ...
Regarding to the online tutorial:
quote: Opening a CXF Font for Editing
To load an existing CXF font file in QCAD to view and edit its glyphs, simply use the menu File > Open and choose the format filter “CXF Font Files (*.cxf)”. Then choose the font file you want to open. The fonts that come with QCAD are stored in directory “fonts” of your QCAD installation.
quote end
Editing the cxf font in the original QCAD font folder will lead to a error message triggered by the Autosave function:
File access error: “C:/Program Files/qcad-3.22.1-pro-win64/fonts\~~Husky_test_font.dxf”. Access is denied. [15:34:58] Autosave failed: C:\Program Files\qcad-3.22.1-pro-win64\fonts\~Husky_test_font.dxf
Note: Windows will not save anything in a system folder and the process is terminated by windows.
Solution: Move the cxf font for editing from the QCAD folder to a unprotected folder like Documents/drawings. After editing is done move it back to the QCAD font folder.
|
|
742 | QCAD (main) | Bug Report | Low | Autosave weird behavior ... | Closed | |
|
Task Description
QCAD 3.0.5
Case: Start QCAD → Went to the Menu → File → Open recent → choose a Drawing out of the List → click to open this existing drawing. Message windows appears: QCAD found an Autosave drawing .... will you open it? I choose NO!!! I go back to the Menu → File → Open recent → will choose the same Drawing .... but it is not anymore listed!!! Ok - I’m not lazy ... ... back to the Menu → File → Open → find the original file on my Hard drive → click to open it and get the Warning Message: “Can not open the File ...... Please check your access rights bla bla bla....”
Question: In this case I’m only able to open the bak file and “Save as” under the old name to get my starting situation back ...? Just because I said “NO” to load the Backup File in first place ... ?
|
|
588 | QCAD (main) | Feature Request | Low | Bemaßung Prefix Dropdown mit eigenen Vorgaben erweitern... | Assigned | |
|
Task Description
Es wäre Arbeitserleichternd wenn ich bei den Optionen für Bemaßungen (Prefix/Postfix) eigene Präferenzen speichern könnte so das diese in allen Zeichnungen von mir verfügbar wären. Zudem wäre es wünschenswert dieses nicht nur bei den Prefix sondern auch bei den Postfix Angaben nutzen zu können was dann alle(?) Manipulationen erschlagen würde.
Siehe auch: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1966
|
|
1058 | Translation | Bug Report | Low | Benutzerreferenz, anstatt skaliert wurde rotiert verwen ... | Closed | |
|
Task Description
In der Benutzerreferenz für Skalieren wurde irrtümlich das Wort “rotiert” anstatt “skaliert” verwendet
|