QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
 900 QCAD (main)Bug ReportHigh Using text in 3.1.2 freezes QCAD Closed
100%
Task Description

Placing text in a drawing using 3.2.1 causes the application to freeze.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8355#p8355

 904 QCAD (main)Bug ReportHigh Crash when inserting some blocks from part library Closed
100%
Task Description

Tested on Linux Mint-64
Inserting some exsisting blocks or newly user created blocks makes QCAD quit!
Permissions were checked and also tested by submitting new blocks to new folder...but problem remains.
See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8387#p8387

 934 QCAD (main)Bug ReportLow Command line not staying active Closed
100%
Task Description

When opening or closing QCAD the command line isn’t staying active.

 935 QCAD (main)Bug ReportLow Isometric projection: crash when projecting complex tex ...Closed
100%
Task Description

Projecting text into an isometric plane crashes QCAD - unless the text is first exploded, which is not always an acceptable appearance.

 949 QCAD (main)Bug ReportLow 3.3.4 didn't promote available upgrade to 3.4  Closed
100%
Task Description

Yes, I had the ‘look for upgrades selected’ and ticked in the dialog. I only acknowledged the available update through the forum announcement made!

 974 QCAD (main)Bug ReportLow Trim not working for Chamfer/Bevel or Round tools Closed
100%
Task Description

Trim not working for Chamfer/Bevel or Round tools in 3.4.3.

With Trim checked nothing happens.

 984 QCAD (main)Bug ReportLow No reference Manual in 3.4.4 Closed
100%
Task Description

No reference Manual in 3.4.4

 988 QCAD (main)Bug ReportLow Hatching in ISO projection gives unwanted result Closed
100%
Task Description

Not sure whether this has been reported yet.
I get an unexpected result when creating a solid fill hatch in an isometric projection, all entities are polylines.

 1035 QCAD (main)Bug ReportLow Isometric Projection (Cylindrical) - draws to wrong lay ...Closed
100%
Task Description

When using the ‘Cylindrical’ isometric tool, the projection does not draw to pre-selected layer in the layer list. This is only achieved when changing the layer in the property editor first. Have not tested this with other projection tools.

 1069 QCAD (main)Bug ReportLow Hatching uses current 'point' display - results in wron ...Closed
100%
Task Description

If a chosen hatch contains points, the hatch will use the point display set in the Application/Current drawing preferences, this leads to incorrectness with certain hatches.

In my attached example I have used AR-CONC (Concrete), the result is something which is wrong!

 1101 QCAD (main)Bug ReportLow Hatch: Some patterns create point shapes around hatch b ...Closed
100%
Task Description

Line weight in exported pdf is sometions wrong. Example, create a polyline closed figure and hatch it with style GRAVEL, then export to PDF. The outline line width will vary depending on the actual zoom factor of the display. I believe this bug is causing points to be displayed at various sizes in the PDF.

 1105 QCAD (main)Bug ReportLow Bug - Layers lost when using Isometric Projection tool Closed
100%
Task Description

Windows 8.1

Layers lost when using Isometric Projection tool

Test case

1.Set up layers.
2.Draw shape (I used a square).
3. Select shape and use Isometric tool (PJ).
5. Layers are lost as soon as reference point is selected.

please see screenshots:

 1153 QCAD (main)Bug ReportLow Graphics View: right click to deselect entities Closed
100%
Task Description

Graphics View: ‘right click’ to deselect entities not working.

I will also test on Windows.

 1160 QCAD (main)Bug ReportLow Persistent 'Saving' feedback after 'Save' command is u ...Closed
100%
Task Description

I seem to have a persistent ‘saving’ feedback message in the status bar, always happens after executing the save command from menu or button.

It doesn’t seem to affect performance in any way and it is the same with any drawing I work on.

 1161 QCAD (main)Bug ReportLow Zoom to selection not working Closed
100%
Task Description

Zoom to selection not working.

See attached screenshot and test file- selecting longer line fails for zoom to selection, but selecting smaller line works?

 1162 QCAD (main)Bug ReportLow Show Large Cross Hairs - not working Closed
100%
Task Description

Setting to show Large Cross Hairs fails, even after a restart.

 1166 QCAD (main)Bug ReportLow Dimension > Radius/Diameter: scale option has no effect Closed
100%
Task Description

I think Husky may have found a bug, please see topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3239&p=11643#p11643

@Husky, hope you don’t mind me adding this for you.

 1243 QCAD (main)Bug ReportMedium Printing / PDF Export: points offset Closed
100%
Task Description

Hi !
im’ trying the 3.9.6 base version, and i have found a problem in printing/exporting..

To replicate the bug:
Try to draw a simple form, for ex a circle, and draw a center of this circle using POINT function.

Now if you make a print preview, then CENTER the circle in the page and try to export to pdf or print, the circle and the POINT (center) are ofsetted !!

i have try to make the same operation with 3.9.5 and i have no problem !!!

 1346 QCAD (main)Bug ReportLow File > Print, File > PDF Export: point entity offset Closed
100%
Task Description

Hi !
im’ trying the 3.12.4.0 base version, on linux mint x64 and i have found a problem in printing/exporting..

To replicate the bug:
Try to draw a simple form, for ex a circle, and draw a center of this circle using POINT function.

Now if you make a print preview, then CENTER the circle in the page and try to export to pdf or print, the circle and the POINT (center) are ofsetted !!

i have try to make the same operation with 3.9.5 and i have no problem !!!

 1347 QCAD (main)Bug ReportMedium Point style bug. Closed
100%
Task Description

Hi !
i have find another strangeware about points.. if you set a different point style in program options, on the display the style is correct, but when you try to print or export the drawing, the points are printed as default “point” (little black circle).

 1351 QCAD (main)Bug ReportLow Help > Check for Updates: No connection to server Closed
100%
Task Description

Installed latest release.

Checked for update and no connection found: See attached image.

 1360 QCAD (main)Bug ReportLow Selection Filter - by Colour not working Closed
100%
Task Description

Selection by colour is not working when using Selection Filter tool.

Draw several lines, circles etc. Change colour to Yellow for example and use selection filter to selet ‘Any’ by colour Yellow - it fails for me.

 1366 QCAD (main)Bug ReportLow Context Menu: Modify > Break Out Gap not working Closed
100%
Task Description

Using context Menu - Break Out Gap not working

 1367 QCAD (main)Bug ReportLow From Context Menu - Move/Copy not working Closed
100%
Task Description

From Context Menu - Move/Copy not working

It seems that when selection is required to use a modify tool, right clicking for context deselects - of course!

 1370 QCAD (main)Bug ReportLow Context Menu suddenly stopped working ? Closed
100%
Task Description

Context Menu suddenly stopped working ?

Yep, tried everything I know of, can’t get it back.

 1374 QCAD (main)Bug ReportLow Using Filter in Tool Settings fails Closed
100%
Task Description

Presumably after entering a search filter one would press enter on the keyboard, when I enter for example ‘Line’ and press enter the dialog closes and nothing happens ?

 1383 QCAD (main)Bug ReportLow Updating to Latest QCAD version - Lost Library items ? Closed
100%
Task Description

When I updated to the most latest version of QCAD I now have no library items - all gone!

 1384 QCAD (main)Bug ReportVery Low Lost Icons in Context Menu Closed
100%
Task Description

When I press ALT + Left mouse click to select overlapping entities - afterwards the icons in the context menu become lost until I restart QCAD again!

 1414 QCAD (main)Bug ReportLow No 'Dark' theme available in Linux Closed
100%
Task Description

In Linux Mint QCAD offers no ‘Dark’ theme, not sure whether this is a bug or not?

 1451 QCAD (main)Bug ReportLow Space doesn't move focus to undocked command line (Linu ...Closed
100%
Task Description

Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4331

 1454 QCAD (main)Bug ReportLow No HTML field for colours in Ubuntu Linux (Mint) Closed
100%
Task Description

No HTML field for colours in Ubuntu Linux (Mint).

 1455 QCAD (main)Bug ReportLow Orthographic Projection -Cylindrical, clipping query Closed
100%
Task Description

Please refer to attached drawing

1.Draw square 80mm x 80mm.
2.Draw circle in the centre 44mm dia.
3.Select circle and project using orthographic projection tool (cylindrical) with clipping enabled onto copy of square to the right.
4.Clipping should do what? is it suppose to clip the edges of the square? if so it doesn’t clip and doesn’t seem to make any difference whether I enable the ‘clipping’ option or not.

 1461 QCAD (main)Bug ReportLow Zoom in / out: not centred under mouse cursor if Retina ...Closed
100%
Task Description

see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4381&p=15906#p15906

 1532 QCAD (main)Bug ReportLow Selection Problem ? Closed
100%
Task Description

Please attached file. When dragging a selection window across only the cyan lines -I get only one line selected?

 1690 QCAD (main)Bug ReportLow Issue with Layers Closed
100%
Task Description

QCad 3.19.2 Professional, 64bit, Liux Mint

Case:
1. We have drawing with hierarchical layers.
2. When try for example to lock all layers from “Layer List Widget” by clicking to “Toggle lock” at Parent Layer. Then locked are all layers in this group. Same is with “Toggle snappable”, “Toggle plottable”, “Toggle frozen”. All works as expected. But “Toggle visibility” works only on this one parent layer.

 1692 QCAD (main)Bug ReportVery Low Issue with Layouts. "Viewport" enteties are not highlig ...Closed
100%
Task Description

QCad 3.19.2 Professional, 64bit, Linux Mint

Case:
1. Open some drawing with viewport entities on layout block (paper scace). Print Preview mode is “On” automatically.
2. Switch to “Black/White Mode” from toolbar and move cursor on “Viewport” enteties. This entitie is not highlighted. With other enteties all works as expected.
In “Full Color Mode” and “Grayscale Mode” no problems.

For example can try on “flange.dxf”

 1694 QCAD (main)Bug ReportLow Viewport entities - Context menu: does not work Closed
100%
Task Description

QCad 3.19.2 Pro 64 bit. Windows 10, Linux Mint

All functions in context menu does not work with “Viewport entities” (Delete, Cut, Copy,etc).
But all same functions also work with keyboard shortcuts, from command line and buttons from toolbar.

 1695 QCAD (main)Bug ReportLow Context menu: editing tools not working in paper space Closed
100%
2 Task Description

Tools not working from context menu in paper space.

 1727 QCAD (main)Bug ReportLow Autosave - Error feedback - DXF staed but should be DWG Closed
100%
Task Description

Hi Andrew,

Just a little thing I noticed recently.

My default is set to save as DWG and indeed it does, however the auto-save feedback tells me that the file is saved to DXF, although it actually does save to DWG - no big deal but is this correct feedback?

Many thanks

Clive

 1730 QCAD (main)Bug ReportLow Point display in a layout / print preview not correct Closed
100%
Task Description

Hi Andrew,

When placing a point in a layout it gives an incorrcet display, for example if I place a cross point style I get a rather strange shape in return!

Many thanks

Clive

 504 QCAD (main)Bug ReportLow Poor results from offsetting a Spline in RC 2/3 Closed
100%
Task Description

Offsetting a Spline, after exploding and converting to a polyline produces a poor result!

1. Version 2.2 - no problems for using polyline Tools > offset for splines - after exploding them and creating a polyline from the segments! The results were acceptable!

2. Version 3 RC3 or 2 (Ubuntu) - the resultant offset of the Spline was unacceptable in Version 3 RC2/3 and only 50% of the offset was created!

 1494 QCAD (main)Bug ReportLow polyline offset fails ? Closed
100%
Task Description

Hi Andrew

Exploded a spline, then created a single polyline from the segments ... but I cannot offset it, to produce another one ?

Is this a bug ?

Regards

Clive

 1504 QCAD (main)Bug ReportLow Dimension - Aligned not working with context menu Closed
100%
Task Description

Dimension - Aligned, not working with context menu.

 1547 QCAD (main)Bug ReportLow PDF won't print out properly Closed
100%
Task Description

Hi Andrew

I have attached a file which was drawn in QCAD, but for some reason when exported to PDF from QCAD it doesn’t print out properly,all I get is the dimensions only.

When printed direct from QCAD all is fine?

Regards

Clive

 1568 QCAD (main)Bug ReportLow Issues: Snaps, Trim, Green selection tool Closed
100%
Task Description

Hello,

There is some issues with the snap tool and the selection tool.The trim button only trims some lines but not all.

1. The snap tool does not let me snap to certain things when i select something. For example i will select a box and i will try to extend the corner to another entities corner but the snap is not there so its free and thus not accurate.

2. For some reason the selection tool does not allow me to select certain things. If i have two boxes overlapping and i use the selection tool (from right to left “green selection box”) it does not allow me to select what i want i have to actually click it. This is annoying when it comes to selecting specific things.

3. The trim tool does not work properly.If i want to trim the inside of a cross hair or such, it only allows me to trim the inside of one line and if i try to trim the other it deletes the complete line.

Please fix as soon as possible. Thanks

 1585 QCAD/CAMBug ReportLow hide/show layer delay Closed
100%
Task Description

Hi !
i’m trying the new qcad/cam 3.17.1 and i have a delay when i hide and show a layer..
(linux MINT 17.2 x64)

The function is working, but the layer will hide (and show) with a delay from click on the apposite button.

The qcad 3.16.7 DON’T have this problem.. when you click on button immediately the layer disappear/show..

 1667 QCAD (main)Bug ReportLow Problem with changing Paper Size in Drawing Preferences Closed
100%
Task Description

V3.19: In Drawing Preferences-Printing I cannot seem to get paper size change to remain. I change from A4 to A3, but this has no effect, seems stuck on A4.

I can change it in Application Preferences, but obviously this does not have an effect once I have started a new drawing.

 1689 QCAD (main)Bug ReportLow Issue with Block Attributes Closed
100%
Task Description

QCad 3.19.2 Professional, 64bit, Liux Mint

Case:
1. Create some block with attributes.
2. Insert this bock into “Model Space” or “Paper Space”.
3. Edit this block. Rename some Attribute names (tag, prompt).
4. And when in “Model Space” or “Paper Space” Synchronize Attributes, we have in properties old and new attributes.

467QCAD (main)Feature RequestLowFeature request for new Arc tool option to add to Arc s...Assigned
0%
2 Task Description

For and behalf of mandrena

To add another Arc tool option in Arc tools set:

1.Specify Start point for Arc.
2.Specify End point for Arc.
3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!

516QCAD (main)Feature RequestLowTo add option to 'print only' selected area.Assigned
0%
2 Task Description

To add the option to ‘print only’ selected area in a drawing.

Showing tasks 51 - 100 of 199 Page 2 of 4 - 1 - 2 - 3 - 4 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing