|
2301 | QCAD (main) | Feature Request | Low | Rotate preview on/off | Assigned | |
1 |
Task Description
Hi,
I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.
It would be nice to have an option to turn this preview on/off.
|
|
2302 | QCAD (main) | Bug Report | Very Low | polygon.getSelfIntersectionPoints(tol) returns 3th inva... | Assigned | |
1 |
Task Description
Windows 7 pro 32 bit msi-Installer Version: 3.26.4.5 (3.26.4.5) Internet: QCAD.org Build Date: Jul 20 2021 Revision: e596276 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Andrew,
In the attached dxf: Besides that it is clear that duplicate vectors are not filtered ... Where a segment is crossing in another node a non valid node is returned as self-intersection point. Seems to be unrelated to CW/CCW or tolerance.
Where 2 nodes coexists 4 duplicate vectors are returned.
Regards, CVH
|
|
2316 | QCAD (main) | Feature Request | Low | Modify > Detect Duplicates: implement for infinite line... | Assigned | |
1 |
Task Description
Headline should already explain the issue ...
|
|
2338 | QCAD (main) | Feature Request | Low | Show non-QCAD custom XDATA optionally | Assigned | |
1 |
Task Description
QCAD (before version 3.27?) used to show some custom XDATA, e.g. tag 1000, even for application names that are not “QCAD”, which for me was useful, so it’s somewhat of a regression. (I think it was broken when selecting multiple items, maybe that’s why it was removed.)
I suggest to bring that feature back, but maybe show it only when a single element is selected if that’s easier.
(As a workaround/hack I guess it would be possible to rewrite the required information as QCAD compatible XDATA externally I guess.)
|
|
2341 | QCAD (main) | Feature Request | Low | manage image references | Assigned | |
1 |
Task Description
QCAD. ver. 3.27.1.0 (3.27.1) Qt version: 5.13.2 Architecture: x86_64 OS Windows 11
It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again. I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)
|
|
2347 | QCAD (main) | Bug Report | Low | Modify / Clip to rectangle issue | Assigned | |
1 |
Task Description
The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.
|
|
2348 | QCAD (main) | Bug Report | Low | text in simple format do not save position after save t... | Assigned | |
1 |
Task Description
How to reproduce the bug: 1-open a new file 2-select text tool, simple text(one line,no formatting) and alignment in base-left 3-write some text in somewhere position in the draw, repeat this in others positions 4-save the file in .dxf R15 [2000/LT2000] (dxflib) format 5-close Qcad 6-open the saved file, the writhed text lose original position and now all the text have 0,0 position
|
|
2351 | QCAD (main) | Feature Request | Low | File Thumbnail Preview | Assigned | |
1 |
Task Description
Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.
|
|
2370 | QCAD (main) | Feature Request | Low | Retain global width / segment widths when reversing pol... | Assigned | |
1 |
Task Description
Andrew,
Changing orientation of a polyline with RV or by changing it in the Property Editor clears the global width value.
Single line pieces as polyline default to CCW. Still the global width is cleared when trying to set them CW.
I didn’t update since 3.27.0 but reading this topic I suppose it still is valid. Related: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9362
Regards, CVH
|
|
2371 | QCAD (main) | Suggestion | Low | Include more properties for polylines in the Selection ... | Assigned | |
1 |
Task Description
Andrew,
Not OS or Version depending.
We can’t filter on some specific properties of polylines.
Handy would be: - Global Width - Orientation
Specific: - Polyline Pattern But I don’t really search for them ... For some post-op I just need them all to be set to ‘No’. - # of vertices Filtering the complex from the more simple ones. - Including Bulges or not To seperate polylines with arc segments form others. There some operations that don’t really work with bulging. - Z values and/or global Z This would make sense for some but filtering on Z is not common under QCAD as it is 2D.
Regards, CVH
|
|
2390 | QCAD (main) | Feature Request | Low | Please add U.S. Survey Feet to the Unit / convert list | Assigned | |
1 |
Task Description
Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245
|
|
2397 | QCAD (main) | Bug Report | Low | Post processor "LaserGBRL (offset) [mm] fails at tabs | Assigned | |
1 |
Task Description
Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.
Forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495
|
|
2406 | QCAD (main) | Bug Report | Low | SVG Export incorrect on blocks | Assigned | |
1 |
Task Description
When using SVG export on a drawing with a block defined, the export is incorrect. Arcs are drawn incorrectly and parts of the block are missing. If that block is exploded, the SVG export is correct. Attached is a block on the lower left and the same block on the lower right after explode. Also attached is the resulting SVG file. This is not always the case. Some blocks are correctly exported to SVG. The upper row is again a block on the left and the same block exploded on the right. It exports properly.
|
|
2415 | QCAD (main) | Bug Report | Very Low | Issues with OffsetBothSides | Assigned | |
1 |
Task Description
Andrew,
I can’t find any documentation concerning OffsetBothSides under Misc .. Modify. It is not listed in the QCAD features nor in the changelog.
There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.
The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline. It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.
There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing. The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.
I only successfully created a dual offset for open Splines, open or logically open Polylines. All other attempts result in a single offset at the indicated side.
There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected. Only tested it on a Win7 platform. I don’t suspect that version 3.27.8 includes a fix for that ...
Regards, CVH
|
|
2416 | QCAD (main) | Feature Request | Low | Automatically set a proper alternating row color for th... | Assigned | |
1 |
Task Description
Andrew,
When switching from Default to Dark mode the text on alternating rows is hardly visible. We can customize this color.
It would be easier if a proper default color is set on switching to and back.
Perhaps the user preferences can be remembered. Perhaps only when the contrast would be affected.
Regards, CVH
|
|
2421 | QCAD (main) | Feature Request | Low | Make the preview of Shorten (LE) more visible | Assigned | |
1 |
Task Description
Andrew,
When we use Lengthen/Shorten (LE) with a positive amount the result is clearly visible when indicating a side of an entity. With a negative amount there is seemingly no preview. It is generated and shown but one can not distinguish it especially with solid lines.
Adding an orthogonal auxiliary preview shape some N pixels long would do the trick.
Regards, CVH
|
|
2428 | QCAD (main) | Feature Request | Low | Implement reversing Leader entities on creation or afte... | Assigned | |
1 |
Task Description
Andrew,
Usually I point to something to start with. Sometimes I want to point away from here but then the arrow is where I just clicked.
An option on creation would be nice. The capability to reverse the Leader orientation afterwards is another method to get it pointing the intended way.
A Leader entity is stored similar as a polyline. I think it would not be difficult to reverse the basic polyline and update the dimension shape accordingly.
Regards, CVH
|
|
2436 | QCAD (main) | Feature Request | Low | Draw > Hatch > Hatch from Segments: mark position of op... | Assigned | |
1 |
Task Description
Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.
Same scenario tested with “Hatch from Selection” (HA) ... ... everything works like a charm
|
|
2440 | QCAD (main) | Bug Report | Very Low | Hatch from Segments > False positives open loop warning... | Assigned | |
1 |
Task Description
Andrew,
Most probably not related to OS or QCAD version.
When hatching an area with Hatch from Segments (HS) there might be false positive warnings on open loops. It seems that this is related to the orientation of the indicated segments and the order of selection. The real problematic position is not always the first that is reported. Loop count is increased even if it is a single loop.
Included a basic test drawing to replicate these. Further details to replicate the issue are in the file.
Regards, CVH
|
|
2446 | QCAD (main) | Feature Request | Low | Extending dimension line beyond extension line when usi... | Assigned | |
1 |
Task Description
I would like the ability to extend dimension lines beyond the extension line when using tick marks. Images are attached and posted here: https://qcad.org/rsforum/viewtopic.php?f=31&t=9785
|
|
2448 | QCAD (main) | Feature Request | Low | Scale lineweight display on model space | Assigned | |
1 |
Task Description
Currently, the model space can display lineweights at scale 1:1 It’s very convenient when drawing small objects that will be printed at scale 1:1 : it makes it easy to anticipate the final aspect of the printed drawing. But this feature is unusable for architects or users who draw large objects.
Therefore, it would be very useful to have a factor to multiply lineweight display in model space. For example : if i know my drawing will probably be printed at scale 1:50, i set the value of the lineweight factor to 50. Then every line would be displayed 50x thicker in model space.
|
|
2452 | QCAD (main) | Feature Request | Very Low | Keyboard Shortcut for Undo Last Point While Drawing Spl... | Assigned | |
1 |
Task Description
Instead of having to click on the toolbar, it would be useful to have a keyboard shortcut for undoing the last fit point (or control point) while drawing splines. Preferably it would also be nice to allow the user the ability to set what the keyboard shortcut is for this function.
|
|
2453 | QCAD (main) | Bug Report | Low | Control point Splines - Issue with Closed & Minimal poi... | Assigned | |
1 |
Task Description
Andrew, For more detailed description please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=33&p=40081#p40081
In the included screen grab below, left is when drawn cubic, closed periodic, from 4 points. Right is when the file is re-loaded.
It is hard to select the incorrect shape when pointing near it ... Probably it is referring to the correct internal shape. After drawing it explodes to a Null length polyline with 2 identical vertices.
I can’t include the error in a file as it reverts on re-load.
The same issue exist for quadratic, closed periodic, from 3 points.
Regards, CVH
|
|
2478 | QCAD (main) | Feature Request | Low | Make RMathLineEdit unit aware | Assigned | |
1 |
Task Description
Andrew,
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10094
When entering 1’ 1’‘ in an input field. - As the size of the rectangle in the topic - As the length property of a line selected in the drawing - ....
Returns 13 in a drawing in mm. And also in a drawing in inch what turns out to be correct. But also in a drawing in foot.
Similar, entering 1’ with a drawing in kilometers it returns 12 units = 12 kilometers.
Regards, CVH
|
|
2482 | QCAD (main) | Bug Report | Low | RShape::getIntersectionPointsCC still failing for touch... | Assigned | |
1 |
Task Description
Andrew,
Referring to this forum post: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10152
With radii 1341.35667735 and 26 the relative tolerance is 0.00683678 and exceeds the former used fixed tolerance of 1e-4.
These arcs will then be considered to be tangent and the intersection point is 0.31024 units to the left of where we expect it.
Implemented: https://github.com/qcad/qcad/commit/77ae3e4518cc34f178779d2d2c724adcf80c229d#diff-dcc4e31eaeaed5a047f65dbce4ddda4bcd4d604e9e1005ee8481ded273768449
Updated: https://github.com/qcad/qcad/commit/071b60acd1176e6301bf6b6fcf716684221a97e8#diff-dcc4e31eaeaed5a047f65dbce4ddda4bcd4d604e9e1005ee8481ded273768449
I had already expressed my reserves on the relative tolerance but that was already a better solution for small arcs: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8775&p=34907#p34907
We could limit the tolerance by: A- The smallest of the fixed and the relative. B- A relative tolerance based on R2 there circle 1 is forced to be the larger one.
This will never account for the position in the plane. At a certain point the tolerance will be less than the accuracy/certainty of the values.
Regards, CVH
|
|
2497 | QCAD (main) | Bug Report | Very Low | Draw > Circle > 3 Tangents (CT3) fails in some cases wi... | Assigned | |
1 |
Task Description
Andrew,
See attachment with example:
Solution included on layer ‘Solution’.
Regards, CVH
|
|
2498 | QCAD (main) | Bug Report | Low | Light/dark mode UI colours depend on OS theme when QCAD... | Assigned | |
1 |
Task Description
On macOS 14.1 and QCAD 3.28.2, the state of the OS (light or dark theme) affects some of the QCAD colour palette for the life of the session. So far I’ve noticed the problem with the keyboard shortcuts in tooltips and text in the command line output, but there may be other instances of the problem.
To reproduce:
1. Set the OS to light mode.
2. Start QCAD. Note the keyboard shortcuts in the tooltips are optimised for a light palette.
3. With QCAD still running, switch the OS to dark mode.
4. Note that while most of the QCAD interface switches to a dark mode palette, the keyboard shortcuts in the tooltips do not.
A similar behaviour is observed when starting from dark mode and switching to light mode.
I hope that makes sense. See attached screenshots for examples.
|
|
2501 | QCAD (main) | Feature Request | Very Low | Add spelling checker / spell checker for all text boxes | Assigned | |
1 |
Task Description
Suggestion to add spelling checker / spell checker for all text boxes
|
|
2505 | QCAD (main) | Feature Request | Very Low | Info > Polygonal Area > Use dimension decimal format fo... | Assigned | |
1 |
Task Description
Andrew, On behalf of user Kmeelo
Polygonal Area adds measurements text with 12 decimal digits and then as short as possible.
Current formatting path see: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10450&p=42833#p42805
Related forum feature request: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10458
I also see a misconception of the term ‘precision’. Numbers precision is the amount of significant digits disregarding the position of the decimal point. 12 decimal digits is about the largest precision for numbers with 5 integer digits.
Regards, CVH
|
|
2538 | QCAD (main) | Bug Report | Very Low | Weight 2.11 French translation typo | Assigned | |
1 |
Task Description
Andrew,
When switched to French I detected a typo in the drop down box for Lineweight.
Weight 2.11mm is listed as 1.58mm {2.11m?} https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts#L1228-L1229 Also see attached image file.
May I ask why only ISO types have a comma instead of a point in French. The use of a comma is uncommon in the Property Editor even when that is the native decimal separator. I also detect an extra space between the value and ‘mm’ and that only for the ISO types.
This only occurs in: https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pl.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pt.ts
Probably not OS or QCAD version related.
Regards, CVH
|
|
2539 | QCAD (main) | Bug Report | Very Low | (Relative) Polar feet + surveyor notation fails. | Assigned | |
1 |
Task Description
Andrew,
A user essentially pointed out to an ACAD textbook example. https://qcad.org/bugtracker/index.php?do=details&task_id=2533 Step 3 of: https://autodesk.blogs.com/between_the_lines/2012/07/drawing-with-surveyors-units-in-autocad.html
Please refer to this topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10652
Regards, CVH
|
|
2540 | QCAD (main) | Feature Request | Low | Retain original handle when Hatch properties are change... | Assigned | |
1 |
Task Description
Andrew,
When we alter about any property of a Hatch entity it seems to be recreated with a newer/higher handle. This doesn’t influence the drawing order in direct. But already changing the drawing order of a Hatch it is recreated as a new entity.
It starts to matters in drawing order when there are multiple entities with the same drawing order and that after save/reload. Entities with the same drawing order then receive a new drawing order based on the original but sequentially increasing based on handle.
Because a Hatch is recreated with a newer/higher handle each time a property changes it will thus always end up above the others with the same order even when the original was created earlier.
This is more pronounced when copying/pasting entities from a source to a target drawing. The original Hatch drawing order is retained but it will always be above existent entities with the same drawing order in the target drawing after save/reload.
Most other entities are probably just updated in situ. It is unsure to me at this point if merely updating a Hatch is even possible. And perhaps this is related to the addObject ForceNew flag what is false by default.
Regards, CVH
|
|
2541 | QCAD (main) | Suggestion | Very Low | Consider the unit "Microinch" to be non-metric | Assigned | |
1 |
Task Description
Andrew,
One Microinch is equivalent to 25.4 nanometers and I don’t consider that to be metric.
RUnit.isMetric(this.getDocument().getUnit()) returns true for RS.Microinch or value 8.
https://github.com/qcad/qcad/blob/master/src/core/RUnit.cpp#L145-L155 Returns false for: RS::Inch ; RS::Foot ; RS::Mile ; RS::Mil ; RS::Yard ... and true for all the rest.
Also see last note in: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=9506&p=38295
Not to be confused with RDocument::isMetric() because that returns the measurement system unless that is RS::UnknownMeasurement what is rather impossible with drawings created by QCAD.
Regards, CVH
|
|
2543 | QCAD (main) | Bug Report | Low | Polygonal Area Tool (IR) creates shapes persistently, c... | Assigned | |
1 |
Task Description
Upon activating the Polygonal Area Tool either by clicking on the toolbar or by the IR keyboard shortcut the tool will persistently draw a polygon without clicking anything. This happens with the mouse and the trackpad on the MacBook Pro. This was happening in 3.29.3, and then after I upgraded to 3.29.4. The MacOS version is 14.1 Sonoma.
|
|
2547 | QCAD (main) | Bug Report | Very Low | Block > Purge Unused Blocks > Removes _DatumFilled bloc... | Assigned | |
1 |
Task Description
Andrew,
The _DatumFilled Block used by Datum entities (DT) is considered as not used and is purged by Purge Unused Blocks (BP). There is no block association for these special types of arrowheads in QCAD.
After purging the Datums are not immediately updated but the special arrowheads will eventually disappear. Adding new Datums will not fix that.
Not problematic because the _DatumFilled Block is re-created on save/reload when Datum entities exists. Datums are updated.
Probably not OS or version related. Related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=10694
Best solution would be to support different types of arrowheads and all related: https://qcad.org/bugtracker/index.php?do=details&task_id=695 https://qcad.org/bugtracker/index.php?do=details&task_id=757 https://qcad.org/bugtracker/index.php?do=details&task_id=1157
Regards, CVH
|
|
208 | QCAD (main) | Feature Request | Low | SVG export: support custom line weights | Assigned | |
|
Task Description
Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594
|
|
277 | QCAD (main) | Feature Request | Low | command line arguments: allow class name after -exec | Assigned | |
|
Task Description
command line arguments: allow class name after -exec
|
|
293 | QCAD (main) | Feature Request | Low | multi-select for blocks | Assigned | |
|
Task Description
It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.
|
|
316 | QCAD (main) | Feature Request | Low | Blocks list and selected block | Assigned | |
|
Task Description
Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?
(Feature request sounds a little harsh, enhancement proposal would seem more apt.)
|
|
355 | QCAD (main) | Feature Request | Low | Remember function for dimension Option | Assigned | |
|
Task Description
I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.
Why Remember Function: If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.
|
|
396 | QCAD (main) | Feature Request | Low | Blocks: moving blocks: show bounding box | Assigned | |
|
Task Description
Blocks: moving complex blocks with drag and drop should show bounding box as preview
|
|
498 | QCAD (main) | Bug Report | Low | issue importing from Autocad | Assigned | |
|
Task Description
There is an issue importing from Autocad: lines and quotes (both arrows and text) appear too much big (see attachment). I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick. Autocad’s dxf are opened with right line thickness but wrong quotes. Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.
|
|
503 | QCAD (main) | Feature Request | Low | Convert entities to points with a fixed distance | Assigned | |
|
Task Description
Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.
See also forum at: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834
|
|
514 | QCAD (main) | Feature Request | Low | Punktpestimmung Intersection manual muss immer wieder n... | Assigned | |
|
Task Description
Beispiel: Zeichnen einer Linie (Line two points) mit Punktbestimmung. Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut
Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht
|
|
523 | QCAD (main) | Bug Report | Low | Selection tool button in CAD tool bar shows line tools ... | Assigned | |
|
Task Description
The selection tool is not accessible:
Click on Selection Tool icon - left panel:
Left panel then shows line tool options.
Click “back” button at top of left panel:
Left panel then shows selection options.
Click an option icon:
Left panel then shows line tool options again.
|
|
554 | QCAD (main) | Feature Request | Low | Auswahlbox sollte auch mit der Shift Taste Bereiche dem... | Assigned | |
|
Task Description
Ziehe ich mit der Maus eine normale Auswahlbox kann ich Elemente markieren. Möchte ich einzelne Bereiche wieder herausnehmen muss ich alle Elemente einzeln anklicken (mit gedrückter Shift Taste). Ich kann zwar dies komfortabler gestalten mit der Select → (De -) Select Contour Funktion welche aber erst über das Menue aufgerufen werden muss.
So wie ich einzelne Elemente mit der Maus auswählen und mit der Shift-Maus Funktion deselektieren kann wäre es schön wenn die Shift Taste auch bei Auswahlbereichen direkt zum deselektieren eingesetzt werden könnte.
|
|
564 | QCAD (main) | Feature Request | Low | Settings organisation in level | Assigned | |
|
Task Description
As an old professional “documentation writer and user inteface designer” but IMHO, I’m not convinced that the “Application preferences” are correctly organised for ease of understanding and using them. These settings are organised in 2 levels. Some of the first levels have their own settings (e.g. “Graphics view”) while most others don’t (e.g. “Load/save”). May I humbly suggest some consistency rules : - no sub-level if there is only one subject - no items on main level if there are already 1 or more sub-level(s). For instance : - sub-level “Default Dimension settings” under “Dimension” is the only sub-level : then move these items under main level “Dimension” and suppress the sub-level ; - the items under “Graphics view” main level (with several sub-levels)could be in a sub-level named “General” ; Actually, “Graphics view” main level is the only one which has both its own items and sub-levels )) ?
|
|
588 | QCAD (main) | Feature Request | Low | Bemaßung Prefix Dropdown mit eigenen Vorgaben erweitern... | Assigned | |
|
Task Description
Es wäre Arbeitserleichternd wenn ich bei den Optionen für Bemaßungen (Prefix/Postfix) eigene Präferenzen speichern könnte so das diese in allen Zeichnungen von mir verfügbar wären. Zudem wäre es wünschenswert dieses nicht nur bei den Prefix sondern auch bei den Postfix Angaben nutzen zu können was dann alle(?) Manipulationen erschlagen würde.
Siehe auch: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1966
|
|
601 | QCAD (main) | Feature Request | Low | Für Berechnungen neu zu erstellende Elemente Werte von ... | Assigned | |
|
Task Description
Es wäre schön wenn ich Werte wie zum Beispiel Längen von Linien direkt abgreifen könnte um diese weiter in Berechnungen verwenden zu können.
Beispiel: Ich habe eine Linie konstruiert wobei sich eine Länge y ergeben hat.
Nun möchte ich eine Linie zeichnen die 5 mal y sein soll.
Linientool → Wert 5* eingeben und y durch Auswahl mit der Maus von dem vorhandenen Elements übernehmen.
Natürlich könnte ich die Geometrie Info benutzen um den Wert abzulesen oder auch über die Zwischenablage zu benutzen. Ein abgreifen mit der Maus wäre aber schneller, direkter und wahrscheinlich auch mit weniger Fehlern (Human error) verbunden. Wahrscheinlich auch genauer da QCad, denke ich, mit mehr Nachkommastellen rechnet, oder?
|
|
604 | QCAD (main) | Feature Request | Low | Measure and record X,Y coordinates tool - add to info ... | Assigned | |
|
Task Description
Feature request See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015
Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.
|