QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
694QCAD (main)Feature RequestMediumUser coordinate systems (UCS)Likely to be implemented
0%
5 Task Description

UCS support.

693QCAD (main)Feature RequestMediumSupport for external references (XREF)Likely to be implemented
0%
13 Task Description

Support for external references (XREF)

260QCAD (main)Feature RequestMediumReference dimensioningLikely to be implemented
0%
9 Task Description

Reference dimensioning (baseline dimensioning)

Create multiple dimensions using the same base line.

259QCAD (main)Feature RequestMediumChain dimensionsLikely to be implemented
0%
11 Task Description

Chain dimensions

1801QCAD (main)Performance IssueLowlow perfomance in paper space and viewportsAssigned
0%
Task Description

Improving the performance of the exceptional use of the processors when switching from the model to the paper space (testing with the attached file) the functionalities of the commands for the viewports are too low in the paper space.

1789QCAD (main)SuggestionLowApplication Preferences / General / Performance :0Assigned
0%
1 Task Description

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

1772QCAD (main)Feature RequestLowGo back on right-click on shaded Tool buttonAssigned
0%
Task Description

Right-click on the tools on the left-hand side of the screen brings you back in the hierarchy.

However, that does not work if you right-click while hovering above a button that that is shaded (inactive).

1755QCAD (main)Feature RequestLowSelecting standard rotation angles by mouse click for M...Assigned
0%
1 Task Description

This would be nice.
It will save a lot mouse - keypad changes for me.

1754QCAD (main)SuggestionLowWhen Selecting multiple blocks that contain the same at...Assigned
0%
Task Description

When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.

1749QCAD (main)Feature RequestLowAdd support for non-uniform block scalingAssigned
0%
1 Task Description

Same txt as on the forum.
had a copy because i had to log in 3 times to remark my own post.

Blocks are no solution either.

see pdf
[attachment=0]Block test_1.pdf[/attachment]

Antartica is put in a block as segments.
Added a rounded corner as segments and as poly.
scaled X x0.5 Y x1 origin the center of the magenta circl.

The scaled version is all over the place.
Set them to color red, no use they stay black.

The reference of the block is 2000mm to the left because I tried it out far right of my design.
The cyan circle is about 400mm in diameter.

dxf part included
[attachment=1]Block test.dxf[/attachment]

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)

CVH

1740QCAD (main)SuggestionLowMake unprintable layers also hidden in print previewAssigned
0%
Task Description

Make unprintable layers also hidden in print preview

1731QCAD (main)Feature RequestLowOption to place text to other sideAssigned
0%
1 Task Description

Hi Andrew,

It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(

Many thanks

C;live

1723QCAD (main)Feature RequestLowDetecting overlapping line / arc segmentsAssigned
0%
4 Task Description

Add a tool to detect overlapping segments or lines and arcs.
Similar like the “overkill” command in other CAD systems.

1722QCAD (main)Feature RequestLowOption to insert viewport at either of the rectangle co...Assigned
0%
1 Task Description

Hi Andrew,

Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.

Hope that makes sense.

Many thanks

Clive

1721QCAD (main)Feature RequestLowInsert table toolAssigned
0%
2 Task Description

Hi Andrew,

I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)

Many thanks

Clive

1714QCAD (main)Feature RequestLowDimension > Diametric: improve display when label is mo...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408

1713QCAD (main)Feature RequestLowAdd attribute value "By Parent" for child layersAssigned
0%
Task Description

Add attribute value “By Parent” for color, line weight, line style for child layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

1702QCAD (main)Feature RequestLowDraw > Polyline: add boolean operationsAssigned
0%
Task Description

Add intersection, union, difference, XOR operations for closed polylines.

1701QCAD (main)Feature RequestLowLayer List / Block List: add filter inputAssigned
0%
Task Description

Add text filter for layer list, block list.

1700dwg2pdfFeature RequestLowdwg2pdf: output multiple layoutsAssigned
0%
Task Description

Add support to specify multiple blocks (layouts) to output (one per page).

1699QCAD (main)Feature RequestLowDimensioning - add option to insert text in the middle ...Assigned
0%
Task Description

Dimensioning - add option to insert text in the middle of dimension.

To have an option to have text aligned in the middle of the dimension line, rather than above it.

1698QCAD (main)Feature RequestLowDimensioning - add option to split dimensionsAssigned
0%
Task Description

Dimensioning - add option to split dimensions.

To have an option to split the extension lines if they run over other entities.

1697QCAD (main)Feature RequestLowDimensioning - add option for horizontal text alignmentAssigned
0%
Task Description

Dimensioning - add option for horizontal text alignment.

Basically an option in drawing preferences to align text horizontally instead of vertically.

1681QCAD (main)Feature RequestLowAuto-dimensioningAssigned
0%
Task Description

You can apply the command to Lines, PolyLine segments, Arcs, Circles, and Rings:

For linear entities parallel to an axis of the coordinate system, aligned Dimensions (parallel Dimensions) are created. For linear entities not parallel to an axis of the coordinate system, either aligned Dimensions (measuring the absolute distance between two points) or horizontal or vertical Dimensions (measuring the horizontal or vertical distance between two points) depending on where you move the pointer are created.

For curved entities, you can create radial, diameter, linear, angular, and arc length Dimensions.

To dimension entities:

Click Dimension > Auto (or type AutoDimension).
In the graphics area, select an entity to dimension.
Click to place the dimension line.
To use another dimension type for Circles or Arcs, specify an option:
Diameter. Creates a diameter Dimension.
Radial. Creates a radial Dimension for an Arc or Circle.
Linear. Creates a linear Dimension of the diameter of a Circle or an aligned, horizontal, or vertical Dimension between the end points of an Arc.
Angular. Dimensions the angle between the end points of an Arc.
Arc length. Dimensions an Arc length.
Note: The chosen option is the default the next time you use the AutoDimension command.

When you move the pointer during a linear dimensioning, you can:
Lock. Determines the current dimension type (aligned, horizontal, or vertical) regardless where you move the pointer.
Unlock. Unlocks the type of linear dimension used.
Press Enter.

***
In short, when you use this tool you click on an entity and it will know what dimension you’re looking for. For Circles, you can specify in the command window R or D for Radius or Diameter.
This would be extremely useful on large drawings where a lot of dimensioning is to be done. One tool and start clicking on entities for dimensioning.

1678QCAD (main)SuggestionLowProperty Editor dialogAssigned
0%
Task Description

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239

1676QCAD (main)Feature RequestLowModify > Explode: explode lines / arcs with line patter...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4333

1674QCAD (main)Feature RequestLowLayouts and Viewports: duplicate layout blockAssigned
0%
1 Task Description

Duplicate layout blocks

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1673QCAD (main)Feature RequestLowLayouts and Viewports: support polygonal viewportsAssigned
0%
1 Task Description

Add support for polygonal viewports

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1666QCAD (main)Feature RequestLowDraw > Line > Relative Angle / Orthogonal: define lengt...Assigned
0%
Task Description

Add option to define length (end point) using mouse pointer.

If reference point is “Middle”, extend line from middle in both directions to mouse cursor (?).

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5205

1663QCAD (main)Feature RequestLowFeature Request: Export Layers as New DrawingAssigned
0%
1 Task Description

Hi!

in many tasks in qcad I ended up exporting one or several layers into individual files for some cnc jobs or further processing. So the steps I usually do are:

  • select all elements on the layer
  • paste into new drawing
  • sometimes rename layer names or attributes
  • adjust dimension settings
  • save and give name for drawing

Sometimes I have up to 100 layers I need to export like this, so an automatic export for all would be time saving too. But very often a “single click” export method would also help a lot. (e.g. inside the layer list an entry in the right click menue like “save as new file”). Also a multiple selection would be handy if more that one layer should end up in the new file. (e.g. select the three layers that need to be in the new document, then right click and save as new file). Maybe this is too much of changes needed inside the layer list - so something like a separate layer export dialogue would make sense.

When exporting many layers some variables for automatic naming of layers and filename would make sense e.g. user can specify basename_%L.dxf to get the basename_layername.dxf or just an increasing number.

For layers and attributes it is often needed to give a layer a certain name or color for different cnc processes (e.g. engraving and cutting for lasers) or to put everything on layer “0” because of some old CAM software that only supports content on layer 0.

probably many more details would make sense that I didn’t think of yet...

kind regards
Martin


1651QCAD (main)Feature RequestLowChange thickness of arch tick for dimensioningAssigned
0%
Task Description

An option in the drawing preferences to change the line thicknesses for arch ticks would be a huge plus, at the moment I am having to insert ‘arch tick’ blocks for this.

1647QCAD (main)Feature RequestLowAdd point / dot option for leaders Assigned
0%
Task Description

Hi Andrew,

Hopefully you might be able to squeeze this one around your busy schedule.

Would it be possible to add in the property editor an option to change a dimension arrow to a point / filled dot and maybe also a tick?

I see you are working on some viewport stuff, I am very much looking forward to testing some of this out ;).

Many thanks

Clive

1645QCAD (main)Feature RequestLowAdd warning when opening file with 3D contentAssigned
0%
Task Description

Hi.

I’m working currently a lot with files coming from rhino. Qcad can open them properly any also most operations on them work as usual - except the selection methods.

box select from upper left to lower right works as usual.
double click to select all connected entities is broken. (only one entity is selected).
box select from lower right to upper left does not select entities touching the selection box. (nothing is selected)

on mac os nothing is selectable with single click.
on linux single click sometimes fails (nothing is selected after clicking on a line).

thanks for looking into this :)

Martin

1632QCAD (main)Feature RequestLowOption to add bespoke dimension precision + tolerance s...Assigned
0%
Task Description

Hi Andrew,

1. I cannot find a way of selecting individual dimensions and changing the precision lets say from 0.00 to 0.000 for these particular dimensions only without affecting all the rest of the dimensions in the drawing - could an option be added for doing this in the property editor or not?

2. Would it be possible to add an option in the drawing preferences so that automatically a symbol is added at the correct placement fo all dimensions, in this case a tolerance plus/minus symbol?

Many thanks

Clive

1629QCAD (main)Feature RequestLowAdd additional Option to Angelur DIM ToolAssigned
0%
Task Description

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

1628QCAD (main)Feature RequestLowMove / Copy and snap tangentialAssigned
0%
3 Task Description

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601

1627QCAD (main)Feature RequestLowrevision cloudAssigned
0%
Task Description

how do i draw revision cloud in Qcad pro
or when do you will implemented it

1625QCAD (main)Feature RequestLowCopy LayerAssigned
0%
Task Description

Hi,

often I’m in the situation that I have to create an additional Layer mostly based on the settings from an already existing Layer. Just a question of organization. This new Layer has then everything identical except the name and one(?) Attribute. This could be that only the color or the Line weight deviates.

Example:

Existing Layer

Layer name: Lot 47 area existing

Attributes

Color: Red

Lineweight: 0.35

Linetype: Dashed


New Layer

Layer name: Lot 47 area proposal

Attributes

Color: Blue

Lineweight: 0.35

Linetype: Dashed

Unfortunately if done manually it happens in an blink of an eye that the human imperfection (me!) makes a mistake and (e.g.) a “Center (.5x)” finds it way into the Linetype Field instead of a “Center (.2x)” .... :-(

The workaround for a few User is to use in cases like this the Property Editor / General Property and customize single Attributes. In my opinion the first step to lose the control over your own drawing ...

A “Copy Layer” / Copy Layer Attributes” function would speed up this task and eliminate to a minimum the “human imperfection” factor.

I could imagine that a right click (like copy block) on the Layer triggers the “Add Layer” function and the dialog is already prefigured with the Settings of the Source Layer ...... ready for editing.
The new Layer itself is “empty” like any other new Layer.

1621QCAD (main)Feature RequestLowNew Drawings in Draft ModeAssigned
0%
Task Description

See: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5001

1613QCAD (main)Feature RequestLowAdd Orthogonal Option to Angelur DIM Tool ...Assigned
0%
1 Task Description

... please see below:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

1601QCAD (main)Feature RequestLowAdd regex to text search & replaceAssigned
0%
Task Description

Add a more versatile way of doing a search and replace for text. Regular expressions maybe?

1596QCAD (main)Feature RequestLowView > Selection Filter: add filter for custom properti...Assigned
0%
Task Description

See also:
https://qcad.org/rsforum/viewtopic.php?f=32&t=4840

1594QCAD (main)Feature RequestLowTool matrix: allow reordering of toolsAssigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923

1586QCAD (main)Feature RequestLowEdit > Application Preferences: Use different color for...Assigned
0%
Task Description

Add preference to use a single, configurable color for all locked layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4879#p17953

1577QCAD (main)Feature RequestLowPostfix for DIM / Remember last DIM Label ...Assigned
0%
1 Task Description

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

1576QCAD (main)Feature RequestLowadd option to switch off dialog for modify: rotate tool...Assigned
0%
1 Task Description

To improve the flow of drawing I’d like to switch off the dialog for the rotate tool. Most of the times i use the interactive input and delete the original. So I don’t need to click a popup to acknowledge that.
I allready use the same option for the move/copy tool.

1570QCAD (main)Feature RequestLowmake the stretch tool more flexible in selecting nodesAssigned
0%
1 Task Description

Stretching multiple points of an entity is not possible to my knowledge. I
can use the stretch tool but this gives me a rectangular selection box and
this limits my posibilities. For example when entities are over eachother.
I hope that in the future this will become more like blender. With a freedraw
selection tool and/or shift clicking multiple nodes.

1567QCAD (main)Feature RequestLowAdd support for separate windowAssigned
0%
1 Task Description

Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already.
That would help a lot when working on multiple files and copying blocks between.

1555QCAD (main)Feature RequestLowExport list of points.Assigned
0%
1 Task Description

Hello
It would be great when you can add a function to export a selected object as a list of points.
Is it possible to add?

Autodes DWG TrueView 2017 has this function and it is very useful.
Here you can see a screenshot of this function.

Showing tasks 1 - 50 of 362 Page 1 of 81 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing