|
2034 | QCAD (main) | Feature Request | Low | Paint Properties to include modifying linetype scales w... | Assigned | |
|
Task Description
Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result. QCAD Pro 3.24 Windows10.
|
|
2037 | QCAD (main) | Feature Request | Low | Support alternative angle reference | Assigned | |
|
Task Description
E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.
|
|
2041 | QCAD (main) | Bug Report | Low | circletangent2 doesn't solve correctly if the defining ... | Assigned | |
|
Task Description
In my example I can’t draw a circle with circletangent2 if the defining point is on one of the defining tangents. The tangency is lost when I try to do this.
I attached 4 screenshots: TheExample.png, TryingPoint1.png, TryingPoint2.png and The_Point_Isn’t_On_The_Tangents.png.
|
|
2048 | QCAD (main) | Bug Report | Very Low | Move / Copy to current layer fails when reference point... | Assigned | |
|
Task Description
QCAD 3.24.2 / macOS x86_64 10.14.6
Starting with empty doc: 1. Draw any object (e.g. a rectangle) on layer 0. 2. Create new layer (”1”) with color, say yellow. 3. Select new layer 4. Select new object 5. Modify → Move / Copy 6. Click reference point 7. Click target point same as reference point 8. In “Move / Copy Options” dialog, select “Delete Original” and check “Use current layer and attributes.” Click OK.
The moved object stays on the layer it was previously on. Using “Move / Copy” as a quick way to move a selection between layers is not useful even though it appears to be the recommended way in a Google search.
Note: if “Keep Original” is selected instead, the copied object is placed on the current layer and the original object remains on its layer, as expected.
Note: if the target point is different from the reference point, the moved object is placed on the current layer as expected.
There are other workarounds too, cut / paste with “To current layer” checked seems to work, as does chaging the layer in the Properties Editor.
|
|
2056 | QCAD (main) | Feature Request | Low | Option Duplicate layer (yy) inclusive all sub-layers. | Assigned | |
|
Task Description
If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done. Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.
Current lack: Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.
With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ...
|
|
2068 | QCAD Community Edition | Bug Report | Very Low | Non-english text in upper/lower index becomes UTF code | Assigned | |
|
Task Description
How to reproduce.
1. Create a text field with some non-english words in the upper index. (see attached pic1.png) 2. Save the project and close QCAD. 3. Run QCAD and open same project. 4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)
Tried different fonts - doesn’t help.
Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux CentOS Linux release 7.7.1908 (Core)
|
|
2072 | QCAD (main) | Suggestion | Low | Inserted and flipped block mirrors text and dim | Assigned | |
|
Task Description
Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.
Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.
Version 3.23.0 doesn’t shows this behavior.
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206
|
|
2088 | QCAD (main) | Bug Report | Very Low | column headers of the "General: tool settings " resize... | Assigned | |
|
Task Description
Open QCAD and the application preferences. In the section “General: tool settings " you can resize the columns: Menu, Shortcuts etc. The problem is that it is not intuitive. The first divider is not selectable and the second moves the first, only backwards.
|
|
2092 | QCAD (main) | Bug Report | Low | crash when changing shortcut in preferences | Assigned | |
|
Task Description
The application crashes when I try to change a shortcut in the preferences. And only after resizing the preferences window. In the attachement are the cli warnings. I also tried the 3.24.3.9 snapshot with the same result.
|
|
2097 | QCAD (main) | Bug Report | Very Low | Very hard to snap to baseline reference point of dimens... | Assigned | |
|
Task Description
With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension. I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.
|
|
2099 | QCAD (main) | Bug Report | Low | DIM Label, Square Symbol doesn't adopt layer attributes | Assigned | |
|
Task Description
The square symbol offered as symbol in DIM label is the only symbol which doesn’t adopt the layer color. If I print a drawing in full color it leads to a black symbol in an otherwise colored dimension.
It is also the only symbol which has a solid filling what is confusing when you work with it in Model_Space ...
|
|
2115 | QCAD (main) | Suggestion | Low | Move toolbars with negative positions to 0 positions | Assigned | |
|
Task Description
As it can be seen in the attached image, QCAD toolbars may dock to a position slightly outside the visible area of the screen. After having docked there, I have not been able to move them any more. Their current position is just in the middle of the screen.
The position of the toolbars remains the same after the deinstallation of QCAD, shutting down, restarting the computer and reinstalling QCAD. I kindly ask for help.
Kind regards Reinhard
|
|
2130 | QCAD (main) | Task | Low | Text: Text dialog removes tabs | Assigned | |
|
Task Description
Text dialog (QTextEdit) strips tabs in toHtml. If tabs can be retained, text entities could support tabs.
|
|
2169 | QCAD (main) | Bug Report | Low | Missing G-Code G00 X0 Y0 when placing hole at x0 y0 | Assigned | |
|
Task Description
When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code. So the first cut was made at the current position of the tool, not at x0 y0!
|
|
2226 | QCAD (main) | Feature Request | Very Low | macOS: support proxy icon | Assigned | |
|
Task Description
Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.
|
|
2227 | QCAD (main) | Feature Request | Low | CAM > CAM Export: post processor for tangential knife c... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342
|
|
2229 | QCAD (main) | Feature Request | Low | Property Editor, option format property values as decim... | Assigned | |
|
Task Description
Angle Display is decimal although the decimal display is disabled in Application Preferences.
Format should be 17° 31’ 52” instead of 17.531111.
|
|
2233 | QCAD/CAM | Feature Request | Low | More selection options to select sheets for nesting | Assigned | |
|
Task Description
I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.
|
|
2252 | QCAD (main) | Bug Report | Low | Freeze / crash when selecting clamped splines (not crea... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8531
|
|
2261 | QCAD (main) | Suggestion | Very Low | QCAD change freehand tool to freehand spline tool | Assigned | |
|
Task Description
no task description |
|
2266 | QCAD (main) | Bug Report | Low | Crash while creating an angular dimension | Assigned | |
|
Task Description
no task description |
|
2271 | QCAD (main) | Bug Report | Low | Unpredictable Crashing on Mac M1 Arm64 | Assigned | |
|
Task Description
I am getting random crashing on my MacBook M1 chipset while using QCAD Pro. There is nothing in particular that you can do to replicate as the crashing is completely inconsistent. Have had it crash when pressing escape while using measurement tool, but have also had it crash while using the app and selecting a tool.
Included crash report, which has also been sent to Apple.
Thanks
|
|
2272 | QCAD (main) | Feature Request | Low | Support unit "US survey foot" | Assigned | |
|
Task Description
In the US, it is (unfortunately) still common to use US survey foot. It seems at least some DXF applications/libraries support this unit as a $INSUNITS value, some references:
There are two issues regarding this with QCAD:
If you open a document with $INSUNITS being 21, it’s reset to 0 (unitless/unspecified) when saved again, even when not changing anything.
It is not possible to select these units in the GUI.
I don’t know about standardization of these values, but my hope is that it’s at least possible to preserve the unit in an existing drawing. Given that this unit is supposed to be obsolete in some years, it might seem less important, but due to this transition, it might get even more important to be able to distinguish between units. Thanks!
|
|
2287 | QCAD (main) | Feature Request | Very Low | Evaluate draw order for preference "Prevent white-on-wh... | Assigned | |
|
Task Description
The Application Preference setting “Graphics View - Appearance - Prevent white-on-white/black-on-black display” seems to be a global setting that doesn’t take the draw order into account. For example: With the setting enabled, it prevents creating a white hatch of a higher draw order on top of a larger, colored hatch with lower draw order (background). The preference does not seem to evaluate if the object is truly drawn as “white-on-white”.
With the preference enabled, setting the object color as “white” will set the “white” color label, but the object color actually stays black. Its hard to determine why it happens in that case.
Is it possible to let the global preference setting be applied to objects after evaluation of the draw order, and determine if the object actually is a true case of white-on-white?
My workaround: Disable the preference setting (I think it is default = on), and only enable it for ad-hoc checks of hidden and overlooked objects.
|
|
2289 | QCAD (main) | Bug Report | Low | Vertical Line Tool stops accepting input | Assigned | |
|
Task Description
When using the vertical line tool, you can enter a length value in the options toolbar, then place the line. If you want to change the length, you just need to enter a new value and the length field will update. However, there seem to be cases where after 10-20 entries, the focus goes off the length field in the options toolbar, requiring the user to bring focus back to continue. I could not seem to duplicate this behavior with the horizontal line tool.
|
|
2290 | QCAD (main) | Bug Report | Very Low | loading the Drawing Preferences using enter, using ente... | Assigned | |
|
Task Description
I use CTRL + I to pull up drawing preferences. Upon changing the dimension settings quickly and closing it normally by pressing enter it closes. But if i go to the next tab (drawing tab) then press enter to load it up quickly instead of pressing CTRL + I. Upon changing the dimensions settings and pressing enter to close it, it won’t close but instead flash and i have to keep pressing enter and eventually it closes.
I think this is a bug.
I have the Pro Version
|
|
2294 | QCAD (main) | Feature Request | Low | Auto Zoom with middle mouse button | Assigned | |
|
Task Description
I tried to assign double click on middle-mouse button to zoomauto command, but it seems it’s not possible currently.
Would love to see this feature.
|
|
2295 | QCAD (main) | Feature Request | Low | Deselect all with Escape key | Assigned | |
|
Task Description
I’m used to have persistant selection while drawing (Application Preferences > Graphics View:Appearance > Selection), but I’m missing deselection of all objects with ESC key. I have seen the option to deselect with right key, but it’s nice to have right key for context menu.
Currently ESC key cancels current active command, but would be nice if there is no command active to also deselect all features by default.
|
|
2296 | QCAD (main) | Feature Request | Low | Custom font type and size for command line widget | Assigned | |
|
Task Description
Would be nice to change default font type and size for command line widget.
|
|
2297 | QCAD (main) | Suggestion | Very Low | Few UI inconsistencies | Assigned | |
|
Task Description
1) Line with command prompt in Command Line widget is missing padding/margin - letter C is glued to frame. 2) In the “Selection Filter” widget there is an “whitespace” character before colon “:” symbol on multiple places, it doesn’t seem repeat anywhere else
|
|
2308 | QCAD (main) | Feature Request | Low | Viewport Scale Field | Assigned | |
|
Task Description
It would be helpful if the scale field that appears while placing a viewport would also re-appear when the viewport is selected after it’s already been placed in the layout. It would also be helpful if the pre-populated values in the dropdown matched those in the global layout scale field.
|
|
2315 | QCAD Community Edition | Bug Report | Low | Crash after ~10-th times move Spline nodes | Assigned | |
|
Task Description
1. Create spline 2. Move spline nodes. After ~10 times move qcad is crashed with backtrace: Thread 9 “Thread (pooled)” received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fff56dc9640 (LWP 8224)] 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848) at /usr/include/qt5/QtCore/qlist.h:492 492 current→v = new T(*reinterpret_cast<T*>(src→v)); (gdb) bt #0 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848)
at /usr/include/qt5/QtCore/qlist.h:492
#1 QList<QSharedPointer<RShape> >::detach_helper (alloc=<optimized out>, this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:835 #2 QList<QSharedPointer<RShape> >::detach_helper (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:849 #3 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #4 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #5 0x00007ffff686182a in QList<QSharedPointer<RShape> >::end (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/qlist.h:342 #6 QList<QSharedPointer<RShape> >::last (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:364 #7 RSpline::appendToExploded (this=0×555557311510, line=...) at math/RSpline.cpp:964 #8 0x00007ffff6867059 in RSpline::getExploded (this=0×555557311510, segments=1457293328) at math/RSpline.cpp:919 #9 0x00007ffff686682a in RSpline::getLength (this=this@entry=0×555557311510) at math/RSpline.cpp:1026 #10 0x00007ffff6c11490 in RSplineData::getLength (this=<optimized out>, this=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineData.h:178 #11 RSplineEntity::getProperty (this=0x5555573114a0, propertyTypeId=..., humanReadable=<optimized out>, noAttributes=<optimized out>,
showOnRequest=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineEntity.cpp:253
#12 0x00007ffff67cc214 in RPropertyEditor::computePropertyValue (ccProp=...) at /usr/src/debug/qcad-3.27.0.0/src/core/RPropertyEditor.cpp:574 #13 0x00007ffff67d298f in QtConcurrent::FunctionWrapper1<void, RProperty&>::operator() (u=..., this=0x555557757f18)
at /usr/include/qt5/QtConcurrent/qtconcurrentfunctionwrappers.h:80
#14 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIteration (it=..., this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:68
#15 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIterations (this=0x555557757ee0,
sequenceBeginIterator=..., beginIndex=<optimized out>, endIndex=15) at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:77
#16 0x00007ffff67d2c9d in QtConcurrent::IterateKernel<QList<RProperty>::iterator, void>::forThreadFunction (this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentiteratekernel.h:255
#17 0x00007ffff44b5b2d in QtConcurrent::ThreadEngineBase::run (this=0x555557757f20) at qtconcurrentthreadengine.cpp:302 #18 0x00007ffff59c8d52 in QThreadPoolThread::run (this=0x555556198b10) at thread/qthreadpool.cpp:100 #19 0x00007ffff59c5a61 in QThreadPrivate::start (arg=0x555556198b10) at thread/qthread_unix.cpp:329 #20 0x00007ffff546c717 in start_thread (arg=<optimized out>) at pthread_create.c:435 #21 0x00007ffff54f018c in clone3 () from /lib64/libc.so.6 (
|
|
2325 | QCAD (main) | Bug Report | Low | dwg file crashes QCAD | Assigned | |
|
Task Description
Regarding to forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8982&p=35836#p35836
dwg loaded in 3.27.1 frees QCAD (no response) and a Win10 PC. Same drawing loaded in 3.26.0 causes no problems. It looks to me that two hatches (handle 198b6, 198ba) are the culprits. Drawing saved without those hatches opens without any problem in 3.27.1.
TECNOFLEX symbol library.dwg = original file from forum post TECNOFLEX symbol library_mod.dwg = my modification
|
|
2328 | QCAD (main) | Bug Report | Very Low | drop down, using keyboard | Assigned | |
|
Task Description
Minor issue! When using keyboard to initiate the dropdown menus. I noticed the ALT “D” does not cycle through the headings Draw & Dimension in the same way. ALT “M” cycles though Modify & Misc or ALT “S” cycles though Select & Snap. User Name: StanTibbs E-mail: [email protected]
|
|
2331 | QCAD/CAM | Feature Request | Low | Tabs: Control over on which particular profile used. | Assigned | |
|
Task Description
Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.
It would be nice to have some kind of control on which profile a tab has to be used.
|
|
2336 | QCAD (main) | Feature Request | Low | Add command to go back to previous nested block | Assigned | |
|
Task Description
“em” just always goes back to the main drawing. But for nested blocks, when jumping from edit mode of one block to the next nested block, it would be helpful to have some “ep” to go back to the previous block.
This was discussed at the forums...
|
|
2337 | QCAD (main) | Feature Request | Low | Distance information should be available in 2D and 3D | Assigned | |
|
Task Description
As per https://qcad.org/rsforum/viewtopic.php?f=32&t=9089, I suggest to extend the distance information tools:
* show Delta Z (at least when any of the elements has Z information) * allow switching between 2D and 3D distance * maybe allow to show both * maybe change the text to distinguish between them (”Distance” → “Distance 2D/3D”)
|
|
2339 | QCAD (main) | Feature Request | Low | Block List multible selection | Assigned | |
|
Task Description
It would be nice to have the possibility to select multiple blocks with Shift and/or CTRL + mouse like the Layer List to use a delete etc command on all selected blocks at once.
|
|
2340 | QCAD (main) | Feature Request | Low | Layer List / Block List: Link minus icon to keyboard de... | Assigned | |
|
Task Description
Referring to Layer List / Block List: It would improve the workflow if the Delete key on the keyboard would be linked to the minus icon (Delete). The command ER is also ignored in both list.
|
|
2378 | dwg2svg | Feature Request | Low | Export attributes on block references as namespaced XML... | Assigned | |
|
Task Description
dwg2svg supports exporting the layer name (and probably others?) as namespaced XML attributes (`qs:layer`) which works well. However I’d like to export block attributes as well, as seen on the following screenshot:
https://imgur.com/a/wUd0adE
(...so `ROOM_NAME` would become `qs:ROOM_NAME=”Eötvös terem”` on the respective XML element).
Thanks in advance.
|
|
2381 | QCAD (main) | Bug Report | Low | Crash when modifying toolbar settings | Assigned | |
|
Task Description
QCAD Professional 3.27.6.0 running on macOS 12.4 (21F79)
QCAD sometimes crashes when I am adding or removing items from toolbars. It isn’t consistent and I haven’t seen a pattern about which items trigger the crash. It has happened while editing different files, but I’ve attached attached a very simple example and two crash reports
|
|
2386 | QCAD Community Edition | Bug Report | Low | Label "Linear format" missing in Property Editor | Assigned | |
|
Task Description
no task description |
|
2387 | QCAD (main) | Feature Request | Low | Open Drawings on Layout Block by Default | Assigned | |
|
Task Description
As the layout block contains the drawing sheet, the number, the viewports, it’s the presentable part of the drawing.
Maybe QCAD could be able to save on the dxf the “last state” of the drawing. If I saved on the Model and closed, it would open on Model... and if my last save was on the Layout”n”, it would open on Layout “n”.
At least on my work area, when opening a finished drawing, it’s the ideal for it to be opened in a Layout (if it was the active block while saving).
|
|
2391 | QCAD Community Edition | Bug Report | Low | Fix Dark Theme for Linux | Assigned | |
|
Task Description
The dark theme for Linux is broken:
- Some icons have dark background (expected) and black foreground color (that should be replaced by white of very light gray) - Some icons have light background (not cohesive with the theme). - The command history shows dark blue font on dark gray background. - The grid’s ruler shows black font over dark background for the numbers. - The icons folder is missing in the GitHub repository, but other themes have that folder. - The general icons (open, save, and so on) are not dark theme friendly. A better approach for maybe all the themes would be to use something like the breeze icons pack for LibreOffice, and it will have the added benefit of making the app look more modern.
The icons issue is the biggest problem. They should probably replace the black color for white or very light gray. Even the red accent color is not ideal for dark themes, is not the main issue.
Attached is an image that show the problems and another that shows LibreOffice with the Dark Breeze theme for reference.
|
|
2396 | QCAD (main) | Bug Report | Low | Missing Dim/Label Format information from an extern wri... | Assigned | |
|
Task Description
Please refer to forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9556
The attached example file is written with a third party CAD program in R15. Opened in QCAD CE all Dim/Label information are available. If I load this drawing in QCAD Pro the Dim/Label information are lost.
If I load and save the example drawing with CE the newly written dxf is readable in Pro without any issue.
|
|
2398 | QCAD (main) | Feature Request | Low | Excessive Autosave | Assigned | |
|
Task Description
Autosave currently updates the backup file indefinitely regardless of whether the drawing has been modified since the last autosave. Request only update autosave following additional edits since last autosave.
|
|
2405 | QCAD Community Edition | Bug Report | Low | Dimension scaling not working | Assigned | |
|
Task Description
I’m using QCAD Community Edition 3.27.7 on Windows 11.
When I started my drawing, I was able to change the size scale factor of (existing) dimensions using “Edit/Drawing Preferences/Dimension/Dimension Settings/Size scale factor”. However, suddenly this feature stopped working and now I cannot switch the dimension scale factor any longer.
I used this feature to be able to adapt the scale factor of the dimensions when printing in different scales. I.e. all my drawings are in “original” size but when it comes to printing, I print some parts in scale 1:2 (in which case I used to set the size scale factor of the dimensions to 2) and some parts in scale 1:10 (in which case I used to set the scale factor of the dimensions to 10). Using this procedure, the dimensions have the same size (font size, arrow size, gaps etc.) on both drawings.
I have attached the drawing, that shows the described issues.
|
|
2433 | QCAD (main) | Suggestion | Low | Lock Snap [SQ] fails at snap Middle Manual [SN] | Assigned | |
|
Task Description
e.g: If I use content out of the clipboard to insert it multiple times into the drawing with using the Middle Manual snap [SN] the snap can’t be locked [SQ] and I have to reactivated the snap again and again for every following insert. Other snaps like END or CENTER work flawless in this scenario.
|
|
2450 | QCAD (main) | Bug Report | Low | Flip Block with Attributes horizontaly fails | Assigned | |
|
Task Description
A block with Attributes can’t be flipped (Option bar) horizontally. The Attributes will be rotated 180° instead of been mirrored. Other entities in the block flip correctly. Same block flipped vertically works as expected (Mirrored Attributes). Same block flipped with FH or MI works as expected. (Mirrored Attributes).
|
|
2457 | QCAD (main) | Bug Report | Low | Polyline start / end widths not saved for first segment | Assigned | |
|
Task Description
Draw a polyline with a single segment
Set the start and end width of the first vertice / segment (index 0)
Save
Reload
|