|
2439 | QCAD (main) | Bug Report | Very Low | Selecting Overlapping Lines | Closed | |
|
Task Description
OS: Linux, Mint 20 Cinnamon 4.6.7, QCAD 3.27.8
According to: https://www.qcad.ch/rsforum/viewtopic.php?t=3944 it should be possible to do Alt+Click on overlapping lines to bring up a small context menu to allow resolving the selection ambiguity. In the current version of QCAD I find it necessary to do Ctrl+Alt+Click.
|
|
2437 | QCAD (main) | Bug Report | Low | Application Preferences, Graphics View, Fonts, Font siz ... | Closed | |
|
Task Description
no task description |
|
2436 | QCAD (main) | Feature Request | Low | Draw > Hatch > Hatch from Segments: mark position of op... | Assigned | |
1 |
Task Description
Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.
Same scenario tested with “Hatch from Selection” (HA) ... ... everything works like a charm
|
|
2435 | QCAD (main) | Bug Report | Low | SVG Export of block reference | Closed | |
|
Task Description
https://qcad.org/rsforum/viewtopic.php?f=33&t=9731
Quick SVG export of a block reference can lead to unexpected results if the vertical flip option is enabled during the insertion of the block. See above forum thread.
|
|
2434 | QCAD (main) | Bug Report | Low | Rotate Viewport fails | Closed | |
1 |
Task Description
Rotating a Viewport will lead to rotate the drawing in the viewport but not the Viewport itself. This will happen during a creation process by using VT or afterward by editing a viewport in the Property Editor.
|
|
2433 | QCAD (main) | Suggestion | Low | Lock Snap [SQ] fails at snap Middle Manual [SN] | Assigned | |
|
Task Description
e.g: If I use content out of the clipboard to insert it multiple times into the drawing with using the Middle Manual snap [SN] the snap can’t be locked [SQ] and I have to reactivated the snap again and again for every following insert. Other snaps like END or CENTER work flawless in this scenario.
|
|
2432 | QCAD (main) | Suggestion | Low | Your tracker site needs an update | Closed | |
|
Task Description
Notice: Trying to access array offset on value of type bool in /home/qcadch/public_html/bugtracker/scripts/details.php on line 222
Saw many other errors when I first logged on.
|
|
2431 | QCAD (main) | Bug Report | Low | Dimensions showing in weird font | Closed | |
|
Task Description
Just installed latest QCAD. Simple drawing. Add a dimension and it shows as per attached image. Have used Qcad on and off for years for doing simple drawings. Not a professional designer. Never had this problem before.
Ubuntu 20.04.1
|
|
2430 | QCAD (main) | Suggestion | Low | error qtime | Closed | |
|
Task Description
Hi I tried to compile latest source to good old OS/2 I use Qt 6.2.4 and gcc 12.2.0 The build failed here.... Could you help me out to fix this error:
H:/USR/LOCAL1220/include/sys/cdefs.h:264: warning: “LONG_LONG_SUPPORTED” redefined 264 | #define LONG_LONG_SUPPORTED
|
<built-in>: note: this is the location of the previous definition g++ -c -Zomf -march=i686 -O2 -mno-avx -std=gnu++1z -Wall -Wextra -DQT_NO_IPV6 -DQT_DISABLE_DEPRECATED_BEFORE=0×000000 -DQCAD_DLL -DQCADCORE_LIBRARY -DQT_NO_DEBUG -DQT_PLUGIN -DQT_PRINTSUPPORT_LIB -DQT_HELP_LIB -DQT_UITOOLS_LIB -DQT_DESIGNER_LIB -DQT_UIPLUGIN_LIB -DQT_WIDGETS_LIB -DQT_SVG_LIB -DQT_GUI_LIB -DQT_QML_LIB -DQT_NETWORK_LIB -DQT_SQL_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQDESIGNER_EXPORT_WIDGETS -IG:/qcad/src/core -I. -IG:/qcad/src/core -IG:/qcad/src/core/math -IG:/qcad/src/grid -IG:/qcad/src/snap -IG:/qcad/src/gui -IG:/qcad/src/entity -IG:/qcad/src/operations -IG:/qcad/src/scripting -IG:/qcad/src/stemmer -IG:/qcad/src/scripting/ecmaapi -IG:/qcad/src/scripting/ecmaapi/generated -IG:/qcad/src/scripting/ecmaapi/adapters -IG:/qcad/src/io/dxf -IG:/qcad/src/spatialindex -IG:/qcad/src/3rdparty -IG:/qcad/src/zip -IH:/USR/LOCAL1220/include -IH:/USR/LOCAL1220/include/QtPrintSupport -IH:/USR/LOCAL1220/include/QtHelp -IH:/USR/LOCAL1220/include/QtUiTools -IH:/USR/LOCAL1220/include/QtDesigner -IH:/USR/LOCAL1220/include/QtUiPlugin -IH:/USR/LOCAL1220/include/QtWidgets -IH:/USR/LOCAL1220/include/QtSvg -IH:/USR/LOCAL1220/include/QtGui -IH:/USR/LOCAL1220/include/QtQml -IH:/USR/LOCAL1220/include/QtNetwork -IH:/USR/LOCAL1220/include/QtSql -IH:/USR/LOCAL1220/include/QtXml -IH:/USR/LOCAL1220/include/QtConcurrent -IH:/USR/LOCAL1220/include/QtCore -Irelease -IH:/USR/LOCAL1220/mkspecs/os2-g++ -o release/RStorageLayerSort.obj G:/qcad/src/core/RStorageLayerSort.cpp g++ -c -Zomf -march=i686 -O2 -mno-avx -std=gnu++1z -Wall -Wextra -DQT_NO_IPV6 -DQT_DISABLE_DEPRECATED_BEFORE=0×000000 -DQCAD_DLL -DQCADCORE_LIBRARY -DQT_NO_DEBUG -DQT_PLUGIN -DQT_PRINTSUPPORT_LIB -DQT_HELP_LIB -DQT_UITOOLS_LIB -DQT_DESIGNER_LIB -DQT_UIPLUGIN_LIB -DQT_WIDGETS_LIB -DQT_SVG_LIB -DQT_GUI_LIB -DQT_QML_LIB -DQT_NETWORK_LIB -DQT_SQL_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQDESIGNER_EXPORT_WIDGETS -IG:/qcad/src/core -I. -IG:/qcad/src/core -IG:/qcad/src/core/math -IG:/qcad/src/grid -IG:/qcad/src/snap -IG:/qcad/src/gui -IG:/qcad/src/entity -IG:/qcad/src/operations -IG:/qcad/src/scripting -IG:/qcad/src/stemmer -IG:/qcad/src/scripting/ecmaapi -IG:/qcad/src/scripting/ecmaapi/generated -IG:/qcad/src/scripting/ecmaapi/adapters -IG:/qcad/src/io/dxf -IG:/qcad/src/spatialindex -IG:/qcad/src/3rdparty -IG:/qcad/src/zip -IH:/USR/LOCAL1220/include -IH:/USR/LOCAL1220/include/QtPrintSupport -IH:/USR/LOCAL1220/include/QtHelp -IH:/USR/LOCAL1220/include/QtUiTools -IH:/USR/LOCAL1220/include/QtDesigner -IH:/USR/LOCAL1220/include/QtUiPlugin -IH:/USR/LOCAL1220/include/QtWidgets -IH:/USR/LOCAL1220/include/QtSvg -IH:/USR/LOCAL1220/include/QtGui -IH:/USR/LOCAL1220/include/QtQml -IH:/USR/LOCAL1220/include/QtNetwork -IH:/USR/LOCAL1220/include/QtSql -IH:/USR/LOCAL1220/include/QtXml -IH:/USR/LOCAL1220/include/QtConcurrent -IH:/USR/LOCAL1220/include/QtCore -Irelease -IH:/USR/LOCAL1220/mkspecs/os2-g++ -o release/RTabletEvent.obj G:/qcad/src/core/RTabletEvent.cpp g++ -c -Zomf -march=i686 -O2 -mno-avx -std=gnu++1z -Wall -Wextra -DQT_NO_IPV6 -DQT_DISABLE_DEPRECATED_BEFORE=0×000000 -DQCAD_DLL -DQCADCORE_LIBRARY -DQT_NO_DEBUG -DQT_PLUGIN -DQT_PRINTSUPPORT_LIB -DQT_HELP_LIB -DQT_UITOOLS_LIB -DQT_DESIGNER_LIB -DQT_UIPLUGIN_LIB -DQT_WIDGETS_LIB -DQT_SVG_LIB -DQT_GUI_LIB -DQT_QML_LIB -DQT_NETWORK_LIB -DQT_SQL_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQDESIGNER_EXPORT_WIDGETS -IG:/qcad/src/core -I. -IG:/qcad/src/core -IG:/qcad/src/core/math -IG:/qcad/src/grid -IG:/qcad/src/snap -IG:/qcad/src/gui -IG:/qcad/src/entity -IG:/qcad/src/operations -IG:/qcad/src/scripting -IG:/qcad/src/stemmer -IG:/qcad/src/scripting/ecmaapi -IG:/qcad/src/scripting/ecmaapi/generated -IG:/qcad/src/scripting/ecmaapi/adapters -IG:/qcad/src/io/dxf -IG:/qcad/src/spatialindex -IG:/qcad/src/3rdparty -IG:/qcad/src/zip -IH:/USR/LOCAL1220/include -IH:/USR/LOCAL1220/include/QtPrintSupport -IH:/USR/LOCAL1220/include/QtHelp -IH:/USR/LOCAL1220/include/QtUiTools -IH:/USR/LOCAL1220/include/QtDesigner -IH:/USR/LOCAL1220/include/QtUiPlugin -IH:/USR/LOCAL1220/include/QtWidgets -IH:/USR/LOCAL1220/include/QtSvg -IH:/USR/LOCAL1220/include/QtGui -IH:/USR/LOCAL1220/include/QtQml -IH:/USR/LOCAL1220/include/QtNetwork -IH:/USR/LOCAL1220/include/QtSql -IH:/USR/LOCAL1220/include/QtXml -IH:/USR/LOCAL1220/include/QtConcurrent -IH:/USR/LOCAL1220/include/QtCore -Irelease -IH:/USR/LOCAL1220/mkspecs/os2-g++ -o release/RTextBasedData.obj G:/qcad/src/core/RTextBasedData.cpp g++ -c -Zomf -march=i686 -O2 -mno-avx -std=gnu++1z -Wall -Wextra -DQT_NO_IPV6 -DQT_DISABLE_DEPRECATED_BEFORE=0×000000 -DQCAD_DLL -DQCADCORE_LIBRARY -DQT_NO_DEBUG -DQT_PLUGIN -DQT_PRINTSUPPORT_LIB -DQT_HELP_LIB -DQT_UITOOLS_LIB -DQT_DESIGNER_LIB -DQT_UIPLUGIN_LIB -DQT_WIDGETS_LIB -DQT_SVG_LIB -DQT_GUI_LIB -DQT_QML_LIB -DQT_NETWORK_LIB -DQT_SQL_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_CORE_LIB -DQDESIGNER_EXPORT_WIDGETS -IG:/qcad/src/core -I. -IG:/qcad/src/core -IG:/qcad/src/core/math -IG:/qcad/src/grid -IG:/qcad/src/snap -IG:/qcad/src/gui -IG:/qcad/src/entity -IG:/qcad/src/operations -IG:/qcad/src/scripting -IG:/qcad/src/stemmer -IG:/qcad/src/scripting/ecmaapi -IG:/qcad/src/scripting/ecmaapi/generated -IG:/qcad/src/scripting/ecmaapi/adapters -IG:/qcad/src/io/dxf -IG:/qcad/src/spatialindex -IG:/qcad/src/3rdparty -IG:/qcad/src/zip -IH:/USR/LOCAL1220/include -IH:/USR/LOCAL1220/include/QtPrintSupport -IH:/USR/LOCAL1220/include/QtHelp -IH:/USR/LOCAL1220/include/QtUiTools -IH:/USR/LOCAL1220/include/QtDesigner -IH:/USR/LOCAL1220/include/QtUiPlugin -IH:/USR/LOCAL1220/include/QtWidgets -IH:/USR/LOCAL1220/include/QtSvg -IH:/USR/LOCAL1220/include/QtGui -IH:/USR/LOCAL1220/include/QtQml -IH:/USR/LOCAL1220/include/QtNetwork -IH:/USR/LOCAL1220/include/QtSql -IH:/USR/LOCAL1220/include/QtXml -IH:/USR/LOCAL1220/include/QtConcurrent -IH:/USR/LOCAL1220/include/QtCore -Irelease -IH:/USR/LOCAL1220/mkspecs/os2-g++ -o release/RTextBasedEntity.obj G:/qcad/src/core/RTextBasedEntity.cpp G:/qcad/src/core/RDebug.cpp: In static member function ‘static void RDebug::startTimer(int)’: G:/qcad/src/core/RDebug.cpp:75:15: error: ‘class QTime’ has no member named ‘start’
75 | timer[id].start();
| ^~~~~
G:/qcad/src/core/RDebug.cpp: In static member function ‘static uint RDebug::stopTimer(int, const QString&, uint)’: G:/qcad/src/core/RDebug.cpp:90:38: error: ‘class QTime’ has no member named ‘elapsed’
90 | unsigned long long t = timer[id].elapsed() * 1000000;
| ^~~~~~~
|
|
2429 | QCAD (main) | Bug Report | Low | Spline Crash | Closed | |
|
Task Description
While editing a spline with fit points, I accidentally moved a fit point on top of another fit point, which locked up the software (grayed out, not responding). I had to ctl / alt / del and end task to resolve.
|
|
2428 | QCAD (main) | Feature Request | Low | Implement reversing Leader entities on creation or afte... | Assigned | |
1 |
Task Description
Andrew,
Usually I point to something to start with. Sometimes I want to point away from here but then the arrow is where I just clicked.
An option on creation would be nice. The capability to reverse the Leader orientation afterwards is another method to get it pointing the intended way.
A Leader entity is stored similar as a polyline. I think it would not be difficult to reverse the basic polyline and update the dimension shape accordingly.
Regards, CVH
|
|
2427 | QCAD (main) | Bug Report | Low | Qcad Pro 3.27.8 coredump on 'Save As' and check for upd ... | Closed | |
|
Task Description
Arch Linux x86_64 (up to date Nov 2022) System Qt version: 5.15.7 Qcad Pro 3.27.8 64-bit
The ‘standard’ Linux installer for Qcad Pro 3.27.8 (qcad-3.27.8-pro-linux-x86_64.run) dumps core on either of the following actions:
- Help/’Check for Updates’
- File/Save As...
However, installing the ‘qcad-3.27.8-pro-linux-qt5.14-x86_64.run’ version built against a more recent version of Qt (as of Nov 2022) does not display these issues.
I am leaving this here in case it is helpful to other users.
|
|
2426 | QCAD (main) | Feature Request | Low | Include linear scale for Arc Length Dimension | Closed | |
1 |
Task Description
Additional to FS#2425
Include scale option in Option Toolbar for Arc Length Dimensions. Include scaling RDimArcLengthData by linear factor.
Regards, CVH
|
|
2425 | QCAD (main) | Bug Report | Low | Dimension > Arc Length: Always uses linear factor from ... | Closed | |
1 |
Task Description
Hi Andrew
When I apply an Arc Length Dimension the result is incorrect, see forum post with screenshot and dxf..
https://qcad.org/rsforum/viewtopic.php?f=33&t=9692#p39217
Cheers John
|
|
2424 | QCAD (main) | Bug Report | Low | File/Folder selection dialogs are broken under KDE | Closed | |
|
Task Description
I run KDE Plasma (KWin window manager) on Gentoo Linux.
I have tested with several different builds of QCAD 3.27.8:
If I use Open, Save As, and anything else that selects a file or a folder, the dialog does not show any contents, and the terminal prints an error:
Warning: couldn't create slave: "Unknown protocol 'file'."
Some of the dialogs behave better by deselecting: Application Prefs > File: Open/Save > File Dialog > Use system file dialog
So, looking through the code, I noticed that there is already KDE-specific handling to avoid using the system dialog, but it has probably been broken since switching to QT5, because Q_WS_X11 (and all other Q_WS_* global macros) no longer exist with QT5+.
I’ve attached a patch that fixes the usage of that macro. With that patch, in my portage-built Community Edition build, I no longer have to deselect “Use system file dialog”.
But, there are at least two places that do not respect the DontUseNativeDialogs setting:
I found the scripts source for the Library Browser PreferencesPage.ui, but I couldn’t find the same for the Templates selection, probably because that is a Pro-only feature (right?).
For the LibraryBrowser, here is the appropriate sections of code:
So, somehow this line needs to change to use the DontUseNativeDialogs setting, but I’m not sure how to do that (I don’t have much experience with QT development).
var dir = QFileDialog.getExistingDirectory(this, fileDlgTitle);
Assuming that Template Folders preference also uses the DirectoryList widget, fixing this should fix that pref pane as well.
|
|
2423 | QCAD (main) | Bug Report | Low | QCAD 3.27.8 Crashes while starting | Closed | |
|
Task Description
Here’s the output in the console:
QCAD version 3.27.8 12:34:54: Debug: loading plugins... 12:34:54: Debug: loading static plugins... 12:34:55: Debug: trying to load theme stylesheet: themes/Default/stylesheet.css 12:34:55: Debug: trying to load theme stylesheet: themes/Default/stylesheet_linux.css 12:34:56: Debug: CadToolBar.initStyle 12:34:56: Debug: EcmaScriptShell.initStyle: 12:34:57: Debug: loading plugins... 12:34:57: Debug: loading static plugins... Warning: action not found: “VisibleInCadToolBar” Warning: action not found: “VisibleInMatrixPanel” Warning: action not found: “VisibleInMenu” Warning: action not found: “VisibleInToolBar” Warning: action not found: “VisibleInUserToolBar1” Warning: action not found: “VisibleInUserToolBar2” 12:35:00: Debug: checking for QCAD Pro updates... Warning: QSslSocket: cannot resolve SSL_set_psk_client_callback Warning: QSslSocket: cannot resolve SSL_set_psk_server_callback Warning: QSslSocket: cannot resolve SSL_CTX_use_psk_identity_hint Warning: QSslSocket: cannot resolve SSLv2_client_method Warning: QSslSocket: cannot resolve SSLv3_client_method Warning: QSslSocket: cannot resolve SSLv2_server_method Warning: QSslSocket: cannot resolve SSLv3_server_method Auto configuration failed 140619518608640:error:0EFFF065:configuration file routines:CRYPTO_internal:missing equal sign:conf/conf_def.c:346:line 24 Warning: QMutex: destroying locked mutex
QCAD has unexpectedly quit.
Please use the offscreen or minimal platform plugin for headless systems (without a running X11 server): ./qcad -platform offscreen
In addition, you might have to override the default Qt style to prevent the loading of a native desktop style (such as GTK): ./qcad -style plastique
Here are my system’s specs:
Operating System: openSUSE Tumbleweed 20221113 KDE Plasma Version: 5.26.3 KDE Frameworks Version: 5.99.0 Qt Version: 5.15.7 Kernel Version: 6.0.8-1-default (64-bit) Graphics Platform: X11 Processors: 4 × AMD Phenom™ II X4 910e Processor Memory: 7.5 GiB of RAM Graphics Processor: AMD RS880
|
|
2422 | QCAD (main) | Bug Report | Low | Error message pops up every (about) 10 min | Closed | |
|
Task Description
Just bought the software, seems to be fine except of the problem described in the title
|
|
2421 | QCAD (main) | Feature Request | Low | Make the preview of Shorten (LE) more visible | Assigned | |
1 |
Task Description
Andrew,
When we use Lengthen/Shorten (LE) with a positive amount the result is clearly visible when indicating a side of an entity. With a negative amount there is seemingly no preview. It is generated and shown but one can not distinguish it especially with solid lines.
Adding an orthogonal auxiliary preview shape some N pixels long would do the trick.
Regards, CVH
|
|
2420 | QCAD (main) | Bug Report | Low | Snap > X/Y from Points / Y/X from Points: command line ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9663
|
|
2417 | QCAD (main) | Bug Report | Low | Insert Measurement/e.g. d1 Point to Point fails within ... | Closed | |
|
Task Description
Insert Measurement / e.g. Point to Point fails within Coordinate (SX) dialog. It is offered for X and Y but I can’t find a way to use it. For a proper measurement with IP I need to use Autosnap etc. but that means I have to switch from Coordinate snap to an other snap with no way to return to use the d1 variable.
|
|
2416 | QCAD (main) | Feature Request | Low | Automatically set a proper alternating row color for th... | Assigned | |
1 |
Task Description
Andrew,
When switching from Default to Dark mode the text on alternating rows is hardly visible. We can customize this color.
It would be easier if a proper default color is set on switching to and back.
Perhaps the user preferences can be remembered. Perhaps only when the contrast would be affected.
Regards, CVH
|
|
2415 | QCAD (main) | Bug Report | Very Low | Issues with OffsetBothSides | Assigned | |
1 |
Task Description
Andrew,
I can’t find any documentation concerning OffsetBothSides under Misc .. Modify. It is not listed in the QCAD features nor in the changelog.
There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.
The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline. It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.
There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing. The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.
I only successfully created a dual offset for open Splines, open or logically open Polylines. All other attempts result in a single offset at the indicated side.
There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected. Only tested it on a Win7 platform. I don’t suspect that version 3.27.8 includes a fix for that ...
Regards, CVH
|
|
2414 | QCAD (main) | Bug Report | Low | Shortcut YR, YE etc fails when layer is marked. | Closed | |
|
Task Description
Shortcut YR, YE etc. fails for marked Layer. It works at active layer.
|
|
2413 | QCAD (main) | Bug Report | Low | Layer > (De-)Select Layer Entities: Default shortcuts Y ... | Closed | |
|
Task Description
Shortcut Y+, Y- fails for selecting Layer Entities in a Layer List. Letter is ignored and +, - zooms the drawing
|
|
2412 | QCAD (main) | Bug Report | Low | Request for option | Closed | |
|
Task Description
For what I use QCad for it would be extremely helpful - and likely quite simple to implement - to have an option to display values (e.g. measurements of position and length) in inches only instead of feet and inches. I suppose if I were working in metric units the same idea would apply to centimetres only instead of metres + centimetres. Consider you have a line segment whose x-position is 3’ 11 17/32” and you need to move it by 2’ 7 13/64”. The math would just be a lot simpler if the “feet” measure were in inches - so 47 17/32” and 31 13/64”.
|
|
2411 | QCAD (main) | Feature Request | Low | Report hatching loop errors in the user defined coordin ... | Closed | |
1 |
Task Description
Andrew,
In “Loop not closed at point 120.079/259.997.” we can not use the coordinate as such. With my preferences I would need 120,079;259,997 as a valid coordinate to enter in the command line. I do this ‘translation’ in between in Notepad.
Not that personally my boundaries are frequently off
Reported by <OttoZ> in: https://www.qcad.org/rsforum/viewtopic.php?f=89&p=38836#p38829 ‘Die Koordinaten lassen sich nicht kopieren, sonst könnte man zur Fehlstelle springen.’
In all cases the “/” is not a valid Cartesian coordinate separator. The dot at the end of the sentence is also not so common in QCAD.
Regards, CVH
|
|
2410 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Graphics View > Fonts: ... | Closed | |
2 |
Task Description
Edit: And it fails often to read the menu at all at the first time. A second try will display the information ...
|
|
2409 | QCAD (main) | Bug Report | Low | Area measurement of hatches leads to a crash of QCAD | Closed | |
|
Task Description
Reported in the QCAD Forum by TSG on a macOS Catalina system. Details on this topic can be found at https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9603#p38738.
|
|
2408 | QCAD (main) | Bug Report | Low | Length of Hatch entity sums the length of the patterned ... | Closed | |
1 |
Task Description
Andrew,
When selecting a Hatch entity: For a solid filled Hatch the boundaries total length is given. With a pattern that returns the summed length of the patterned lines.
I think that the recent performance update for RHatchData::getLength returns something different than intended.
Regards, CVH
|
|
2407 | QCAD (main) | Bug Report | Low | App stalling for Trace Bitmap with no image in selectio ... | Closed | |
|
Task Description
Andrew,
Trace Bitmap requires a selection. QCAD stalls when the first entity id is not an RImageEntity .
The prevImageEntity.getFileName() in the beginEvent will throw an exception for all but an RImageEntity.
The odds are against us that in a multiple selection an image is the first id.
I think you need to filter on image entities like later in the applyOperation function.
Regards, CVH
|
|
2406 | QCAD (main) | Bug Report | Low | File > SVG Export: wrong arcs in blocks with negative s ... | Closed | |
1 |
Task Description
When using SVG export on a drawing with a block defined, the export is incorrect. Arcs are drawn incorrectly and parts of the block are missing. If that block is exploded, the SVG export is correct. Attached is a block on the lower left and the same block on the lower right after explode. Also attached is the resulting SVG file. This is not always the case. Some blocks are correctly exported to SVG. The upper row is again a block on the left and the same block exploded on the right. It exports properly.
|
|
2404 | QCAD (main) | Performance Issue | Low | Extreme Lag When Selecting Solid or Pattern Hatch | Closed | |
|
Task Description
Hi Andrew
I get Extreme Lag When Left Click and Selecting Solid or Pattern Hatch...
Please See Thread in Forum... https://qcad.org/rsforum/viewtopic.php?f=33&t=9588&p=38670#p38670
Screenshot & DXF Attached for your convenience ..
Version: 3.27.7.0 (3.27.7) Build Date: Sep 30 2022 Revision: 62d387f Qt Version: 5.14.2 Architecture: x86_64 Compiler: gcc 5.4.0
Cheers John
|
|
2403 | QCAD (main) | Bug Report | Low | Print Preview Page Not The Same As Output | Closed | |
|
Task Description
Hi Andrew
When I Print or save as PDF the paper settings don’t seem to be working.... The output file does not match..
See Forum Post https://qcad.org/rsforum/viewtopic.php?f=33&t=9587&p=38662#p38662
Cheers John
|
|
2402 | QCAD (main) | Bug Report | Low | Selection Filter fails for different filter scenarios. | Closed | |
|
Task Description
Please refer to the user report below: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9586&p=38653#p38653 Note: 3.27.6.0 (3.27.6) works as intended.
Thanks.
|
|
2401 | QCAD (main) | Bug Report | Low | File > Print / PDF Export: Page size always A4 | Closed | |
1 |
Task Description
Only prints on A4 size paper, no matter what settings, print or pdf export, print from model or from layout block
Version: 3.27.7.0 (3.27.7) Internet: QCAD.org Build Date: Sep 29 2022 Revision: 58ecdde Qt Version: 5.13.2 Architecture: x86_64 Compiler: MSVC++ 14.0 (2015)
|
|
2400 | QCAD (main) | Bug Report | Low | View > Selection Filter: Entity type "Any" has no effec ... | Closed | |
1 |
Task Description
The “Any” filter matches no entities.
|
|
2399 | QCAD (main) | Bug Report | Low | Directly edit object's Y coordinate, with a formula, al ... | Closed | |
|
Task Description
Select an object, e.g. a block or text. Hit G P to open the object’s properties.
Select the text input for the X coordinate. Add the string +0.1 to the end. Hit enter. The coordinate is increased by 0.1.
Repeat this for the Y coordinate. The coordinate always becomes 1.
Repeat this a second time, for the Y coordinate, without closing the properties dialogue in between edits. The coordinate updates as expected, e.g. 1.1, 1.2, 1.3...
|
|
2398 | QCAD (main) | Feature Request | Low | Excessive Autosave | Assigned | |
|
Task Description
Autosave currently updates the backup file indefinitely regardless of whether the drawing has been modified since the last autosave. Request only update autosave following additional edits since last autosave.
|
|
2397 | QCAD (main) | Bug Report | Low | Post processor "LaserGBRL (offset) [mm] fails at tabs | Assigned | |
1 |
Task Description
Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.
Forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495
|
|
2396 | QCAD (main) | Bug Report | Low | Missing Dim/Label Format information from an extern wri... | Assigned | |
|
Task Description
Please refer to forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9556
The attached example file is written with a third party CAD program in R15. Opened in QCAD CE all Dim/Label information are available. If I load this drawing in QCAD Pro the Dim/Label information are lost.
If I load and save the example drawing with CE the newly written dxf is readable in Pro without any issue.
|
|
2395 | QCAD (main) | Bug Report | Low | Incorrect new lightyear conversion value | Closed | |
|
Task Description
Seen https://github.com/qcad/qcad/commit/302010556a077f71b3de6c3c0f8f3df0282a5da9 And that all entries are a division by 1000
It is exactly 9 460 730 472 580 800 meter To return a correct factor to meters the value must be a factor 1000 larger.
131 return 9460730472580800000 / 1000;
More info: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=9506&p=38295#p38295
Kind regards, CVH
|
|
2394 | QCAD (main) | Bug Report | Low | crash whenn upload immage file or saving a project | Closed | |
|
Task Description
When i try to upload an immage Q cad professional edition last evrsion always crash, the same happens when i try to save a project.
|
|
2392 | QCAD (main) | Bug Report | Low | File > Save: Dimension override for linear format not s ... | Closed | |
|
Task Description
Dimension override for linear format not saved to file.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9536
|
|
2390 | QCAD (main) | Feature Request | Low | Please add U.S. Survey Feet to the Unit / convert list | Assigned | |
1 |
Task Description
Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245
|
|
2388 | QCAD (main) | Bug Report | Medium | CAM module - Tab visibility problem | Closed | |
|
Task Description
Hi, Recently I found out that tabs (CAM module) are only visible on layer 0. If I turn this layer off, all tabs will disappear. It is very inconvenient for someone who create a drawing using multiple layers. Im my case, layer 0 contains the frame and the info table only. When the drawing is ready and verified, I add a layer with a copy of the drawing just for g-code generation. I do it in that way because the drawing sometimes has to be modified for cnc purposes. Please correct this problem.
Tested on: QCAD/CAM Pro 3.27.6 PC with Windows 10.
|
|
2387 | QCAD (main) | Feature Request | Low | Open Drawings on Layout Block by Default | Assigned | |
|
Task Description
As the layout block contains the drawing sheet, the number, the viewports, it’s the presentable part of the drawing.
Maybe QCAD could be able to save on the dxf the “last state” of the drawing. If I saved on the Model and closed, it would open on Model... and if my last save was on the Layout”n”, it would open on Layout “n”.
At least on my work area, when opening a finished drawing, it’s the ideal for it to be opened in a Layout (if it was the active block while saving).
|
|
2385 | QCAD (main) | Bug Report | Low | ScriptItems are inserted with the unit setting for a ne ... | Closed | |
|
Task Description
Tested on a Win7 32bit and a Win10 64bit system.
With App.Prefs defaults for new drawings set to mm, mm, metric. Inserting a ‘CubeCuttingOut’ with the default size 10 into a drawing in inch results in size 0.39370079” what is indeed 10mm.
One would expect it to be sized 10 units of the target drawing.
Recently reported by Husky concerning the QCAD Utilities by MikeJ. https://qcad.org/rsforum/viewtopic.php?f=30&t=9429&start=15#p38045
ScriptItems are first created on a new (offline) document. QCAD will then adapt the size with unit conversion. Then it will scale, rotate, flip according the ‘Insert Script’ tool options.
This is fully predictable for standard library items where the source is a dxf file with a defined unit and no unit conversion would occur if the library source unit was ‘None’.
I then assume that this can be fixed with setting the new RDocument in InsertScriptItem.prototype.beginEvent its unit to ‘None’. Not knowing what the intended behavior should be for any other case, source or usage ...
Regards, CVH
|
|
2384 | QCAD (main) | Feature Request | Low | need some help with copy with reference and paste | Closed | |
|
Task Description
Dear Mr Mustun,
I’ve got a problem similar to issue 2354.
Sometimes I have to create bigger drawings. Therefore I often create a “main drawing” and some “detail drawings”. I usually do the details in “detail drawing” and transfer them to “main drawing” by using “copy with reference” and “paste”. Until a few days ago it worked quite properly, but now it doesn’t anymore.
Today from issue 2354 I’ve learned that qcad doesn´t use windows clipboard. Can you tell me an alternative way to help me, please?
OS: Windows 11 Home QCAD: Professional 3.27 (.4 ?, purchased July 29th 2022) 64 bit
Sincerely, FW
|
|
2383 | QCAD (main) | Bug Report | Low | Dark Theme -> Layers Names are not visible | Closed | |
|
Task Description
If the Theme is chosen as Dark, the name of even layers in the Layer List is with white color and the name of background is also white. Please see the attachment.
Many thanks!
|
|
2382 | QCAD (main) | Bug Report | Low | DGN file load / import fails | Closed | |
|
Task Description
dgn file load / import fails in Pro and Trial. https://www.qcad.org/rsforum/viewtopic.php?f=2&t=9444
Warnings:
|