|
1812 | QCAD/CAM | Bug Report | Low | Coordinate display: coordinates not updated while mouse ... | Closed | |
|
Task Description
The coordiantes (in the lower left corner) freeze while mouse is moving. Updates as soon as the mouse is stopped.
This slows me down considerably. I have to stop, wait (too see the coordinates), move, stop, wait, move back, stop, wait, move, stop wait... This gotta be a bug?
MacOS 10.12.6
|
|
1089 | QCAD/CAM | Bug Report | Low | Convert polyline from segments on locked layers deletes ... | Closed | |
1 |
Task Description
If you select (line) segments in a visible yet locked layer and choose “convert segments to polyline” (OG), the segments are deleted, but inserting the polyline fails. So you can easily destroy locked layers by mistake which contradicts the idea of locking layers.
|
|
1324 | QCAD/CAM | Suggestion | Very Low | Confusing Copy / Move option | Closed | |
|
Task Description
Hi,
Using the Copy and Move command the [ ] Use current layer and attributes’ is confusing.
Perhaps [ ] change copy /moved set to current layers and attributes. is more suitable.
|
|
2167 | QCAD/CAM | Bug Report | Low | Comma format decimal separator fails ZSafety CAM config... | Assigned | |
1 |
Task Description
QCAD/CAM Trial package Win installer 32 bit Version: 3.25.2.0 (3.25.2) Internet: QCAD.org Build Date: Sep 4 2020 Revision: 4a61501 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Local decimal separator is ‘,’ (comma) In CAM configuration .. Z Levels .. Safety level
Using nn,nnn the output is Nxx G0 Znn Using nn.nnn the output is Nxx G0 Znn.nnn
Drop down boxes are all in dot format. Didn’t try anything else yet
Regards, CVH
|
|
1055 | QCAD/CAM | Bug Report | Low | code page problem | Closed | |
|
Task Description
After creating the labels in drawing in Russian (Cyrillic), after saving and reopening the drawing file - changing the text encoding (??????????). Need to re-type the text ... How to fix this error?
|
|
1465 | QCAD/CAM | Bug Report | Critical | Circle is drawn as polygon | Closed | |
|
Task Description
Hi,
I have a circle and circle is not round. Unit of drawing is in metres and radius is set to 2.38. The circle displays as a polygon instead.
|
|
1901 | QCAD/CAM | Feature Request | Low | CAM Traverse Toolpath | Assigned | |
|
Task Description
Hallo Andrew,
Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.
Example added as pdf.
Greetings
|
|
2241 | QCAD/CAM | Bug Report | Low | CAM Simulation: stops working after closing a file | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=8449
|
|
2521 | QCAD/CAM | Bug Report | Low | CAM Simulation: No tool visible | Closed | |
|
Task Description
Exception in CAM simulation when previewing tool position.
|
|
1538 | QCAD/CAM | Bug Report | Low | CAM not use the shortest way | Closed | |
|
Task Description
ich habe ein Linien Gitter in QCAD erstellt und dann mit CAM Export eine NC Datei erstellt. Im CAM Simulator sieht man dass der GCODE Postprozessor nicht den kürzesten Weg verwendet. Anbei folgende Dateien : CAM_TEST_LINIEN.dxf, CAM_TEST_LINIEN.nc, CAM_TEST_LINIEN.log und eine Bilddatei CAM_TEST_LINIEN.png hier kann man sehen wie die Eistellungen für die GCODE Erstellung sind.
|
|
1914 | QCAD/CAM | Feature Request | Low | CAM layer On/Off | Closed | |
|
Task Description
Hallo Andrew
If CAM layer invisible do not 3D Simulate and do not write G-code.
|
|
1902 | QCAD/CAM | Feature Request | Low | CAM G-Block Toolpath | Assigned | |
|
Task Description
Hallo Andrew,
Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.
|
|
958 | QCAD/CAM | Bug Report | Low | CAM Export: points not exported | Closed | |
|
Task Description
Points are not being exported.
|
|
1817 | QCAD/CAM | Bug Report | Low | CAM Export: offset fails for contours with arcs (tolera ... | Closed | |
|
Task Description
After regenerate selected toolpath OR regenerate all toolpath.
The result of the output is every time different.
When pushed for example 2 or 3 times this button.
See pictures
|
|
1813 | QCAD/CAM | Bug Report | Low | CAM Export: missing G01 | Closed | |
|
Task Description
Trying the EleksMaker EL01 Laser router I noticed some bugs in creating pathways, rapids, tolerance and homing.
See the attached pdf
|
|
1820 | QCAD/CAM | Bug Report | Medium | CAM Export: exporting text entities broken | Closed | |
|
Task Description
Hi Andrew,
Kubuntu, QCAD/CAM 3.21.3
Font Standard. Selected as ‘single line’ font for engraving with mill or laser.
While CAM Exporting as G-code Laser (Offset) MM, or as Linux CNC, Exporting gets trapped in a loop.
In Font Standard the glyph’s ? & $ @ s S Q and 2 contains unwanted Z-movements. It seems these glyphs entities are not alligned properly; endpoint last line does not meet startpoint next line; why else the Z-movements?
Could this misallignment also traps Exporting?
|
|
1134 | QCAD/CAM | Bug Report | Low | CAM Export: cut inner paths before outer paths broken | Closed | |
|
Task Description
This option seems to only work with the script debugger enabled. See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3091
|
|
1803 | QCAD/CAM | Bug Report | Low | CAM configuration output unit fixed in inch instead of ... | Closed | |
1 |
Task Description
Ij window CAM Configuration output unit appears as inch instead of mm. All parameters are in option when create a nc file,units are in inches not in mm. unsuable and not possible to change
|
|
2024 | QCAD/CAM | Bug Report | Low | CAM > Nesting: Nesting blocks with multiple parts fails | Closed | |
|
Task Description
Case: Nesting quantity all test: 3
Nesting block2 = works Nesting block1 = fails (placed outside sheet), Nesting both blocks = fails (placed partly outside sheet),
|
|
2000 | QCAD/CAM | Bug Report | Low | CAM > Nesting: misleading "Sheet added" confirmation | Closed | |
|
Task Description
Within the nesting preparation: A left mouse click to add a sheet will always be confirmed with “Sheet added”, regardless of a proper selection or where the left click is done in Model_Space.
|
|
2491 | QCAD/CAM | Bug Report | Low | CAM > Nesting: Fails for duplicate block references | Closed | |
|
Task Description
- Create a block reference to block “A” - Duplicate block reference - Nest both block references
Only one block reference is nested, the other one is not placed.
|
|
2234 | QCAD/CAM | Bug Report | Low | CAM > Nesting: Cancel button not working | Closed | |
|
Task Description
Clicking cancel button only hides dialog but does not stop nesting. Escape key works as expected.
|
|
2001 | QCAD/CAM | Bug Report | Low | CAM > Nesting: Alignment fails | Closed | |
|
Task Description
Description for the CAM Nesting alignment:
Quote: Alignment: Parts are arranged with the chosen alignment in mind. An alignment of “Left - Bottom” means that parts are shuffled to the left (primary alignment) and towards the bottom (secondary alignment). Quote end
I tested a few scenarios. e.g a Top Left, Align → leads to a top right alignment, a Top left, Hull → leads to a Bottom Left alignment, etc.
|
|
2509 | QCAD/CAM | Bug Report | Very Low | CAM > Laser GRBL Tool creation failed | Closed | |
|
Task Description
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=91&p=43078#p43076
Reason: LaserBase.js should not only make CamPlungeRate and CamPlungeRate_Label invisible, but also set a default value, such as zero.
Temporary fix: https://www.qcad.org/rsforum/viewtopic.php?f=91&p=43078#p43078
|
|
1962 | QCAD/CAM | Bug Report | Low | CAM > Drill Toolpaths: Cannot be edited / updated from ... | Closed | |
|
Task Description
Hallo Andrew,
Found a bug in the drill toolpath generator.
|
|
1946 | QCAD/CAM | Bug Report | Low | CAM > Cam Legacy Export: Cut inner paths before outer p ... | Closed | |
|
Task Description
The option “Cut inner paths before outer paths” is ignored, causing trouble when outer paths are cut first.
Attached is a link to the script files and gcode examples.
|
|
1593 | QCAD/CAM | Bug Report | Low | CAM > CAM Export: ZH in header always yields default va ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=4914
|
|
1997 | QCAD/CAM | Bug Report | Low | CAM > CAM Export: Fails for new document created | Closed | |
|
Task Description
When I create a simple drawing, I cannot export the gcode until I restart qcad.
general steps to reproduce the issue: 1. open a new drawing 2. Add a letter “D” near the origin in Arial font, about 7mm tall. 3. explode it 4. save the drawing 5. Fill in in the “cam configuration” 6. Select the drawing and generate the tool paths. 7. Hit the “export button” or the menu item. 8. Observe that you see the “camexport” command appears in the command section, but there is no file generated for the gcode.
If you restart qcad, then the gcode will export as expected. Also, it appears to work for more complicated drawings. I had the same issue, when I tried to generate the same thing, but using the string “November 2019” at 5mm height. I am using up to date MX Linux with kernel version 4.19.0. I also observed this behavior under Windows 10 professional.
|
|
2028 | QCAD/CAM | Bug Report | Low | CAM > CAM Export: Fails for new document created | Closed | |
|
Task Description
1. Load drawing 2. Create new drawing 3. Add toolpath / tool 4. CAM > CAM Export
Fails to identify current config (post processor).
|
|
1940 | QCAD/CAM | Feature Request | Low | CAM > CAM Configuration: Add program description | Assigned | |
1 |
Task Description
Add a program description to the CAM configuration dialog and export to postprocessors as variable.
See also: https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649
|
|
2250 | QCAD/CAM | Bug Report | Low | CAM > Add Profile Toolpath: lead out type / size not sa ... | Closed | |
|
Task Description
Lead out type and size are not respected (signals blocked and not unblocked).
|
|
1971 | QCAD/CAM | Bug Report | Low | CAD/CAM 3D Simulator | Assigned | |
|
Task Description
Hallo Andrew,
Found a bug in the 3D Simulator execution
|
|
1847 | QCAD/CAM | Bug Report | Low | BUG MEMORY | Assigned | |
|
Task Description
Hi Andrew,
Still working on creating HPGL.PLT toolpaths for the HP7580 pen plotter. QCAD has some trouble creating toolpaths. Too often it shuts itself down, or the PC gets stalled.
Recreating the same error however is possible
|
|
1963 | QCAD/CAM | Bug Report | Low | Bug Font Standard OR Cam Config | Closed | |
|
Task Description
Hallo Andrew
Confronted with a bug in font Standard glyph ”s” (small S), and a solution.
|
|
1237 | QCAD/CAM | Bug Report | Medium | Blocks should be layer agnostic | Closed | |
|
Task Description
I have created a block from a selection. I have then later created more items on my CAD page using that block, then later yet, moved the objects to a new layer. I noticed that while the object has accepted being on the new layer, the color hasn’t changed to the new layer’s color. I can only get the line color to change if I go into the block itself and move the individual segments of the block to that new layer, then save the new block (which, by the way, I can’t save over the existing block?!?!)
In the sample file attached, you will see that the block item in the 3 o’clock position is in layer 0, while the rest are in “Vent Holes” layer. If you make layer 0 hidden, the one block is hidden (like it should), but the block item refuses to take on the layer’s color even though the block’s color is “By Layer”
|
|
2213 | QCAD/CAM | Feature Request | Low | Allow editing Spindle Speed separately for each Toolpat... | Assigned | |
1 |
Task Description
Hello dear CAM developers!
I need to use the same tool at different spindle speed in a single machining file. I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)
FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal. I need to be able to do both engraving and cutting in a single file. Alas! this laser tool is defined with a fix and unique number (99). Therefore I cannot define different laser tools with different speeds.
Many thanks Best regards.
|
|
2507 | QCAD/CAM | Feature Request | Low | Add Toolpath from Layer | Assigned | |
1 |
Task Description
I’ve been able to make this work as proof of concept very easily, but many of the functions are inaccessible/difficult to override from post-processors.
Desired functionality:
1) Enable “Add Profile Toolpath” UI elements all the time (remove setRequiresSelection) 2) CAM Profile Toolpath Dialog: Drop-down menu of available Layers. First option “By Selection Only” 3) “By Selection Only” continues to pass EntityIds of selected objects (existing functionality) 4) Choosing an active Layer will use the Layer as source of EntityIds 5) Any changes to Entities on a Layer will result in those new/removed/changed objects being re-generated without having to manually select and update the tool paths. Either do not recover list of EntityIds from the ToolpathBlock, and instead use “live” each time it’s regenerated, or additional functionality to determine if a LayerId is associated with the Toolpath, and then lookup EntityIds.
I assume the persistence of the Layer selection would be available within the Toolpath, so that it will automatically update EntityIds every time a Toolpath is regenerated, without having to select Entities and updating the toolpath manually.
For large projects, being able to force select objects based upon layer dramatically reduces mistakes and speeds up the workflow.
Thanks
|
|
2374 | QCAD/CAM | Feature Request | Low | Add Spindle Speed to Toolpath Dialog | Assigned | |
1 |
Task Description
When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.
Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.
Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?
Many thanks’, and best regards.
|
|
1815 | QCAD/CAM | Feature Request | Low | Add Laser tool option | Assigned | |
|
Task Description
Hi Andrew,
Creating G-code for cnc-laser, the laser-tool can not be correctly set at all.
Attached a laser tool proposal
|
|
2164 | QCAD/CAM | Feature Request | Low | Add ability to pan the 3D view with a modifier key and ... | Assigned | |
2 |
Task Description
With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.
|
|
1913 | QCAD/CAM | Bug Report | Low | 3D Simulation Behaves odd | Assigned | |
|
Task Description
Hallo Andrew,
testing the drill toolpath I used single point markers.
In 3D simulation the tool drills the toolpath AND uses the drill as a mill.
Cam Export and generated G-code is not effected.
|
|
1646 | QCAD/CAM | Bug Report | Medium | 3.18 has a HATCH issue | Closed | |
|
Task Description
If you pres the “hatch icon” then the word “hatch” appears in the command window, but. . . nothing happens.
But if you type “hatch” followed by “enter” then finally the Hatch Window pops up.
|
|
2187 | QCAD Community Edition | Bug Report | Low | X Scale text property is not saved | Closed | |
|
Task Description
I added a link to a short video showing the issue.
In that case I set the `X Scale` property to `0.5`. When reopening the file after saving it, that property turned back to `1`. Other values (e.g. `2`) give the same result.
|
|
2011 | QCAD Community Edition | Suggestion | Very Low | Update QCAD CE SpatialIndex module to latest version | Assigned | |
|
Task Description
Building with the bundled version, 1.8.5, works fine.
When I try to build using the system version, which for Mageia Cauldron is 1.9.3, the build fails.
https://raw.githubusercontent.com/kekePower/mmbl/master/qcad/2019/12/11/20%3A13%3A48/log.qcad
Here is the current spec file for version 3.23.0.4. https://svnweb.mageia.org/packages/cauldron/qcad/current/SPECS/qcad.spec?revision=1465894&view=markup
It looks like qcad is incompatible with versions above 1.8.5.
Are there plans to port to the new version?
Thanks in advance.
|
|
2255 | QCAD Community Edition | Bug Report | Low | Script bindings not available for Qt version 6.1.1 | Closed | |
|
Task Description
:-1: error: Script bindings not available for Qt version 6.1.1. You can add them to src/3rdparty/qt-labs-qtscriptgenerator-6.1.1 or use another version of Qt.
:-1: error: [Makefile:64: sub-3rdparty-make_first-ordered] Error 3
I cloned QCADsource code from Github and was trying to build source code from qt creator community version but got the above errors.
|
|
1939 | QCAD Community Edition | Bug Report | Low | Right click not working in QCAD Community Edition | Closed | |
1 |
Task Description
After I remove the .dll files from the pro trial version, right click stop working on Windows 10. I went a little further to try identifying which of the 5 files specifically causes right click to stop working, and I found that it is qcadproscripts.dll. The presence or absence of the other 4 dll files that make up the pro version has no influence on this behavior.
|
|
2313 | QCAD Community Edition | Bug Report | Low | qcad-3.26.4.14. build error due to missing qt project f ... | Closed | |
|
Task Description
cd ../qcad-3.26.4.14.tar.gz/ && ( test -e Makefile || /usr/lib/qt5/bin/qmake -o Makefile /home/li/下载/qcad-3.26.4.14.tar.gz/qcad-3.26.4.14.tar.gz.pro CONFIG+=ractivated ) && make -f Makefile debug Cannot find file: /home/li/下载/qcad-3.26.4.14.tar.gz/qcad-3.26.4.14.tar.gz.pro. make: *** [Makefile:308:sub—-qcad-3-26-4-14-tar-gz-debug_ordered] 错误 2
|
|
2393 | QCAD Community Edition | Bug Report | Low | QCad crashes while loading plugins | Closed | |
|
Task Description
Please see this downstream bug report: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=265989
|
|
2052 | QCAD Community Edition | Bug Report | Critical | QCAD Crash when try to save file | Closed | |
|
Task Description
I have tried to use QCAD on arch linux and installed the latest version via
pacman -S qcad
Steps to reproduce the bug:
i also added a coredump file from the crash if it does help to locate the problem..
kind regards, stif
|
|
2068 | QCAD Community Edition | Bug Report | Very Low | Non-english text in upper/lower index becomes UTF code | Assigned | |
|
Task Description
How to reproduce.
1. Create a text field with some non-english words in the upper index. (see attached pic1.png) 2. Save the project and close QCAD. 3. Run QCAD and open same project. 4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)
Tried different fonts - doesn’t help.
Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux CentOS Linux release 7.7.1908 (Core)
|