|
2360 | QCAD (main) | Bug Report | Low | Special characters and italic letter issues | Closed | |
|
Task Description
Many thanks Andrew for your input on task FS#2359 . However there were two other issues mentioned in the first task that seem to have been overlooked. Italic text appears and disappears as I zoom in and out and if I try to insert italic text it will not show as italic on screen. Also when I try to insert an ‘ohm’ special character I only get a ‘?’ question mark. Apologies if I’m doing something silly !! Regards Richard
|
|
2359 | QCAD (main) | Bug Report | Low | Pieces of text disappear | Closed | |
|
Task Description
Note that my operating system is Windows 11. Recently updated from 32 bit (3.24.3.0) on old machine to 64bit version (3.27.3) on new computer. Old drawings transferred across to new version. Now bits of text missing. I can overcome bits of text missing by selecting View-Screen based Linetypes but when I print the text has bits missing once again. Some text appears and then disappears as you zoom in and out and selecting View screen based linetypes has no effect. Also I have noticed that the special character Ohm symbol shows as ? on screen. Also not possible to put Italic letters on drawing.
|
|
2358 | QCAD (main) | Bug Report | Low | Paste: flip vertical broken | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9275
|
|
2357 | QCAD (main) | Bug Report | Very Low | Reference points not cleared when deleting selection | Closed | |
|
Task Description
See also: https://qcad.org/rsforum/viewtopic.php?f=89&t=9274
|
|
2356 | QCAD (main) | Bug Report | Low | File > Close: Closing dialog stays open after clicking ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9273
Note: drawing stays “modified” after saving from dialog.
|
|
2355 | QCAD (main) | Bug Report | High | Viewport: Crash when moving, rotating, mirroring or str ... | Closed | |
|
Task Description
Recursion in move, rotate, mirror, stretch of viewport entity.
|
|
2354 | QCAD (main) | Feature Request | Low | copy-paste between two QCAD instances | Assigned | |
2 |
Task Description
Hello,
I’ve quite often the task to transfer changes from one set of drawings to another (similar) set. My ideal setup would be to open one set in one window and the other set in another window. Both windows would be arranged side-by-side (larger monitor). Changes would be copy-pasted from one set to the other.
From #2352 I’ve learned that there is a command-line option to achieve this.
Unfortunately it’s not possible to copy-paste between these instances.
And yes, it’s important to do this in two windows to see both versions at the same time. So, tabs are not the answer.
It’s also ok if i could detach a tab from one instance and arrange it aside of the main window (like the property editor). Than all data transfers would happen inside the same instance.
Best regards, Klaus
|
|
2353 | QCAD (main) | Feature Request | Low | add theme folder to a local shared path | Assigned | |
5 |
Task Description
Would it be possible to add Qcad’s theme folder to the local shared path, for example this would be /home/username/.local/share/QCAD/QCAD/themes for Linux. I know this works well for line types and would be extremely helpful for themes.
|
|
2352 | QCAD (main) | Feature Request | Low | parallel tool instances | Closed | |
|
Task Description
Hello, I’ve quite often the task to transfer changes from one set of drawings to another (similar) set. My ideal setup would be to open one set in one window and the other set in another window. Both windows would be aranged side-by-side (larger monitor). Unfortunately Qcad (I’m using the Pro version) does not allow to be started twice in parallel. Not even Qcad-trial runs concurrently to Qcad-Pro.
So my request is to be able to run two instances of Qcad-Pro in parallel.
It’s ok if the second instance is in a kind of read-only mode where neither data not tool-settings can be changed. It’s also ok if number of concurrent instances is limitted to 2.
Best regards, Klaus
|
|
2351 | QCAD (main) | Feature Request | Low | File Thumbnail Preview | Assigned | |
1 |
Task Description
Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.
|
|
2350 | QCAD (main) | Bug Report | Very Low | Quick Modify - Icons Missing From Toolbar | Closed | |
|
Task Description
Hi Andrew
The Icons are missing on the Quick Modify Toolbar..
Cheers John
QCAD/CAM Version: 3.27.1.0 (3.27.1) QCAD.org Build Date: Dec 13 2021 Revision: 2726424 Qt Version: 5.8.0 Architecture: x86_64 Compiler: gcc 4.8.1
PS Also missing on windows version 3.27.1 See Forum Post below. https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9220
|
|
2349 | QCAD (main) | Feature Request | Low | Imperial drawings doesn't accept imperial scales for Vi ... | Closed | |
|
Task Description
Drawing inch / imperial
If I add a Viewport imperial scales for that Viewport like 1” = 32’ are not accepted. Accepted are only metric scales like 1/100.
Please see also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=9206
|
|
2348 | QCAD (main) | Bug Report | Low | text in simple format do not save position after save t... | Assigned | |
1 |
Task Description
How to reproduce the bug: 1-open a new file 2-select text tool, simple text(one line,no formatting) and alignment in base-left 3-write some text in somewhere position in the draw, repeat this in others positions 4-save the file in .dxf R15 [2000/LT2000] (dxflib) format 5-close Qcad 6-open the saved file, the writhed text lose original position and now all the text have 0,0 position
|
|
2347 | QCAD (main) | Bug Report | Low | Modify / Clip to rectangle issue | Assigned | |
1 |
Task Description
The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.
|
|
2346 | QCAD (main) | Bug Report | Low | Access to Command: Line by pressing space bar | Closed | |
|
Task Description
On the current version of QCAD (used on a M1 MacBook Pro) you can set a keyboard shortcut timeout which I have set to 5000, 5seconds is ok to press two keys and press return. However I find this this method of selecting the command line is not consistent, its selection time varies from approx 0.5sec up to 5sec which leads to incorrect command selection.
To get around this at preset I use a mouse click to select the command line which works every time.
An option not to use the keyboard time would be better so the space bar selects command line, return key executes and closes or Esc cancels and closes selection
Hope you can look into this Regards Paul
|
|
2345 | QCAD (main) | Bug Report | Low | File > Print: printing multiple copies prints too many ... | Closed | |
|
Task Description
File > Print Set copies to 2 4 sheets are printed.
|
|
2344 | QCAD (main) | Bug Report | Low | Draw > Polyline > Polyline along Segments: Crash on can ... | Closed | |
1 |
Task Description
Throws me out of QCad consistently:
1. Have a polyline selected. 2. Click partial polyline along selection and click the first point on the polyline. 3. Hit escape key or similar to exit the tool.
|
|
2343 | QCAD (main) | Bug Report | Low | Modify > Projection: Dimension entities offset | Closed | |
|
Task Description
Reference point not taken into account when projecting dimension entities.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9117
|
|
2342 | QCAD (main) | Bug Report | Low | Layer > Edit Layer: Changing Color of Invisible Layer | Closed | |
|
Task Description
Steps to reproduce: 1. Create a new layer with color (e.g.) red. 2. Draw a line. 3. Make the layer invisible. 4. Edit the layer to change its color to (e.g.) green. 5. Make the layer visible. The line will appear colored red. If you save, close, and reopen the file, it will now appear green.
|
|
2341 | QCAD (main) | Feature Request | Low | manage image references | Assigned | |
1 |
Task Description
QCAD. ver. 3.27.1.0 (3.27.1) Qt version: 5.13.2 Architecture: x86_64 OS Windows 11
It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again. I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)
|
|
2340 | QCAD (main) | Feature Request | Low | Layer List / Block List: Link minus icon to keyboard de... | Assigned | |
|
Task Description
Referring to Layer List / Block List: It would improve the workflow if the Delete key on the keyboard would be linked to the minus icon (Delete). The command ER is also ignored in both list.
|
|
2339 | QCAD (main) | Feature Request | Low | Block List multible selection | Assigned | |
|
Task Description
It would be nice to have the possibility to select multiple blocks with Shift and/or CTRL + mouse like the Layer List to use a delete etc command on all selected blocks at once.
|
|
2338 | QCAD (main) | Feature Request | Low | Show non-QCAD custom XDATA optionally | Assigned | |
1 |
Task Description
QCAD (before version 3.27?) used to show some custom XDATA, e.g. tag 1000, even for application names that are not “QCAD”, which for me was useful, so it’s somewhat of a regression. (I think it was broken when selecting multiple items, maybe that’s why it was removed.)
I suggest to bring that feature back, but maybe show it only when a single element is selected if that’s easier.
(As a workaround/hack I guess it would be possible to rewrite the required information as QCAD compatible XDATA externally I guess.)
|
|
2337 | QCAD (main) | Feature Request | Low | Distance information should be available in 2D and 3D | Assigned | |
|
Task Description
As per https://qcad.org/rsforum/viewtopic.php?f=32&t=9089, I suggest to extend the distance information tools:
* show Delta Z (at least when any of the elements has Z information) * allow switching between 2D and 3D distance * maybe allow to show both * maybe change the text to distinguish between them (”Distance” → “Distance 2D/3D”)
|
|
2336 | QCAD (main) | Feature Request | Low | Add command to go back to previous nested block | Assigned | |
|
Task Description
“em” just always goes back to the main drawing. But for nested blocks, when jumping from edit mode of one block to the next nested block, it would be helpful to have some “ep” to go back to the previous block.
This was discussed at the forums...
|
|
2335 | QCAD (main) | Bug Report | Low | Rendering solid hatches in scaled blocks | Closed | |
|
Task Description
Andrew, presumed not to be OS/version depending.
Referring to topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=9073. An issue that has similarities with several topics, and some bug reports (closed or still open).
Solid hatches in blocks that are scaled up seems to be crippled. Very pronounced with arcs in the boundary. I suspect that the arc interpolation isn’t scaled along with the Block Reference scale.
Another issue exists for patterned hatches in blocks. I suspect that the hatch origin is kept as defined in the block.
Applying the block reference insertion point and at scale as an offset to the hatch origin while rendering would: - hatch the inserted block exactly the same as it is created in the block. - reduce lagging and increase pattern accuracy/coherency there the hatch origin is at the same distance to the hatch as it is in the block. I know this doesn’t solves anything when the block is created from entities and the hatch origin wasn’t close to the hatch itself.
Regards, CVH
|
|
2334 | QCAD (main) | Bug Report | Low | Modify > Break Out Segment: Line Selection Mode fails o ... | Closed | |
|
Task Description
no task description |
|
2333 | QCAD (main) | Bug Report | Low | Ordinate dimensions: scale option ignored | Closed | |
|
Task Description
Hello, I’m having issues with ordinate dimensions on a DXF file that is not scale 1:1.
Running on Windows 10 Qcad/Cam Pro V 3.27.1.0
Here is my scenario;
Step 1; Import CAD file “ScaleTest1142022.DXF” which is scaled at 1:2 from the previous software (Solidworks). Step 2; Clean up file, scale up to 1:1 and move to XY zero. Step 3; Add horizontal or vertical dimensions, they are correct. If I do ordinate dimensions, they are double of what they should be. Outside of block is 1.0” x 6.0”, but ordinates come up as 2.0” x 12.0” When adding ordinate dimensions, there is a scale dropdown option, changing this seems to have no effect on anything. Going into drawing preferences, Dimension settings, the size scale factor is 1.
On these dimensions, the linear measurement factor is set to 2, and the dimension displayed is not double what it really should be. All other horizontal and vertical dimensions added have the linear measurement factor set to 1 and the dimensions are correct.
Is there a way to force the “LMF” to 1 always?
|
|
2332 | QCAD (main) | Feature Request | Low | Hatch Sources | Closed | |
|
Task Description
As we know it is easy to copy our own hatches (.pat) to QCAD but unfortunately with every QCAD update I’ve to move those files to a new location.
This said - it would be nice to have the possibility to tell QCAD the source for such customized hatch collection. Similar to the “Library Source” feature for the Library Browser.
|
|
2331 | QCAD/CAM | Feature Request | Low | Tabs: Control over on which particular profile used. | Assigned | |
|
Task Description
Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.
It would be nice to have some kind of control on which profile a tab has to be used.
|
|
2330 | QCAD/CAM | Feature Request | Low | Toolpath optimization optional (on/off) | Assigned | |
2 |
Task Description
Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033
|
|
2329 | QCAD (main) | Bug Report | Low | Viewport: arcs in scaled viewports are not rendered cor ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9025
|
|
2328 | QCAD (main) | Bug Report | Very Low | drop down, using keyboard | Assigned | |
|
Task Description
Minor issue! When using keyboard to initiate the dropdown menus. I noticed the ALT “D” does not cycle through the headings Draw & Dimension in the same way. ALT “M” cycles though Modify & Misc or ALT “S” cycles though Select & Snap. User Name: StanTibbs E-mail: [email protected]
|
|
2327 | QCAD (main) | Bug Report | Low | Spam | Closed | |
|
Task Description
Spam
|
|
2326 | QCAD (main) | Bug Report | Low | Library item - Long distance between cursor and object | Closed | |
|
Task Description
Please see the reported issue below: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=8994&p=35889#p35889
The library items is designed only with hatches. Inserted within the Library Browser will lead to a wildly displaced reference point position. The then in the drawing available block inserted again from the Block List will show the original correct reference.
On the other hand - Library Items designed with common entities like circle, line etc. behave in both cases normal as expected.
|
|
2325 | QCAD (main) | Bug Report | Low | dwg file crashes QCAD | Assigned | |
|
Task Description
Regarding to forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8982&p=35836#p35836
dwg loaded in 3.27.1 frees QCAD (no response) and a Win10 PC. Same drawing loaded in 3.26.0 causes no problems. It looks to me that two hatches (handle 198b6, 198ba) are the culprits. Drawing saved without those hatches opens without any problem in 3.27.1.
TECNOFLEX symbol library.dwg = original file from forum post TECNOFLEX symbol library_mod.dwg = my modification
|
|
2324 | dwg2csv | Bug Report | Low | dwg2csv: exception when listing properties (-l) | Closed | |
|
Task Description
dwg2csv -l
Exception when trying to list properties for RDwgStyle
|
|
2323 | QCAD (main) | Bug Report | Low | editing causes zero length entities | Closed | |
|
Task Description
Exploded a simple text A into polylines. exploded polylines into lines and arcs. modified by using trim and break out segment. result makes a bunch of zero length entities. can be found and eliminated by using detect zero length, but casual user just see a bunch of errors in the dxf r21 file. 0 ARC
5
59 330 4CA 100 AcDbEntity
8
hatch
6
Continuous 62
7
100 AcDbCircle 10 5.403666619400000E+98 20 8.414296587700000E+98 30 0.0 40 1.000000000000000E+99 100 AcDbArc 50 237.2913973989 51 237.2913973989
as you can see the coordinates are wacko and start and end angles are the same.
|
|
2322 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: dimension problem | Closed | |
|
Task Description
If I convert to an other unit it will only change the unit name - no dim (Existing or new) is calculated regarding to the new unit.
|
|
2321 | QCAD (main) | Bug Report | Low | dwg2svg: dots in hatch patterns not visible in SVG outp ... | Closed | |
|
Task Description
Possibly related to FS#2309
|
|
2320 | QCAD (main) | Bug Report | Low | Viewport: text misplaced if viewport is set to not plot ... | Closed | |
|
Task Description
When toggling the plotability of the viewport layer, the Arial fonts inside the viewport when viewing the paperspace disappear or move when plotability is turned off. This does not occur for the CAD Standard font, and it does not happen with text that is not brought in via a viewport, such as from a block or added directly into paperspace. I have attached a DXF and a video file that shows the odd behavior.
I am using QCAD 3.27.0 and Win10 Pro.
|
|
2319 | QCAD (main) | Bug Report | Low | Status Bar disabled at startup | Closed | |
|
Task Description
Please refer to topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8921
- Launch QCAD-Pro 3.26.4.13, Status Bar is off by default - Set menu View > Status Bar on - The Status Bar is showed but the menu options remains unchecked - Quit QCAD-Pro - At launch QCAD-Pro opens with the Status Bar toggled off - Set View > Status Bar on (or issue GS from command line) - At the next launch the Status Bar is off
Note: the preference StatusBar in the .ini file has the value “false” when it should be “true”. Changing the value manually to “true” makes the Status Bar appear just for the next launch of QCAD then the preference is reset to “false” by QCAD.
- Deleted the .ini file, same behavior - Changed user, same behavior - Tried on MacOS 10.11.6 (El Capitan), same behavior
QCAD Professional
Version: 3.26.4.13 (3.26.4.13) Internet: QCAD.org Build Date: Nov 18 2021 Revision: fbb9f37 Qt Version: 5.10.1 Architecture: x86_64 Compiler: Clang 8.0.0
Riepilogo hardware:
Nome modello: iMac Identificatore modello: iMac12,1 Nome processore: Intel Core i5 Velocità processore: 2,5 GHz Numero di processori: 1 Numero totale di Core: 4 Cache L2 (per Core): 256 KB Cache L3: 6 MB Memoria: 16 GB Versione Boot ROM: 87.0.0.0.0 Versione SMC (sistema): 1.71f22
|
|
2318 | QCAD (main) | Bug Report | Low | Restore open files not working | Closed | |
|
Task Description
Please refer to topic https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8902
- Upgraded from QCAD-Pro 3.22.1.0 to 3.26.4.13 (snapshot) - Launch QCAD-Pro and set Restore open files preference ON - Create a new test drawing and save without closing it - Quit QCAD-Pro - Launch QCAD-Pro, it opens with an empty drawing
- Deleted the .ini file, same behavior - Changed user, same behavior - Tried on MacOS 10.11.6 (El Capitan), same behavior
QCAD Professional
Version: 3.26.4.13 (3.26.4.13) Internet: QCAD.org Build Date: Nov 18 2021 Revision: fbb9f37 Qt Version: 5.10.1 Architecture: x86_64 Compiler: Clang 8.0.0
Riepilogo hardware:
Nome modello: iMac
Identificatore modello: iMac12,1
Nome processore: Intel Core i5
Velocità processore: 2,5 GHz
Numero di processori: 1
Numero totale di Core: 4
Cache L2 (per Core): 256 KB
Cache L3: 6 MB
Memoria: 16 GB
Versione Boot ROM: 87.0.0.0.0
Versione SMC (sistema): 1.71f22
|
|
2317 | QCAD (main) | Bug Report | Low | Crash / lag when selecting splines with clamped knots ( ... | Closed | |
|
Task Description
OpenDesign bug (endless loop or very long delay) in OdDbSpline::getDistAtParam.
|
|
2316 | QCAD (main) | Feature Request | Low | Modify > Detect Duplicates: implement for infinite line... | Assigned | |
1 |
Task Description
Headline should already explain the issue ...
|
|
2315 | QCAD Community Edition | Bug Report | Low | Crash after ~10-th times move Spline nodes | Assigned | |
|
Task Description
1. Create spline 2. Move spline nodes. After ~10 times move qcad is crashed with backtrace: Thread 9 “Thread (pooled)” received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fff56dc9640 (LWP 8224)] 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848) at /usr/include/qt5/QtCore/qlist.h:492 492 current→v = new T(*reinterpret_cast<T*>(src→v)); (gdb) bt #0 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848)
at /usr/include/qt5/QtCore/qlist.h:492
#1 QList<QSharedPointer<RShape> >::detach_helper (alloc=<optimized out>, this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:835 #2 QList<QSharedPointer<RShape> >::detach_helper (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:849 #3 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #4 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #5 0x00007ffff686182a in QList<QSharedPointer<RShape> >::end (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/qlist.h:342 #6 QList<QSharedPointer<RShape> >::last (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:364 #7 RSpline::appendToExploded (this=0×555557311510, line=...) at math/RSpline.cpp:964 #8 0x00007ffff6867059 in RSpline::getExploded (this=0×555557311510, segments=1457293328) at math/RSpline.cpp:919 #9 0x00007ffff686682a in RSpline::getLength (this=this@entry=0×555557311510) at math/RSpline.cpp:1026 #10 0x00007ffff6c11490 in RSplineData::getLength (this=<optimized out>, this=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineData.h:178 #11 RSplineEntity::getProperty (this=0x5555573114a0, propertyTypeId=..., humanReadable=<optimized out>, noAttributes=<optimized out>,
showOnRequest=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineEntity.cpp:253
#12 0x00007ffff67cc214 in RPropertyEditor::computePropertyValue (ccProp=...) at /usr/src/debug/qcad-3.27.0.0/src/core/RPropertyEditor.cpp:574 #13 0x00007ffff67d298f in QtConcurrent::FunctionWrapper1<void, RProperty&>::operator() (u=..., this=0x555557757f18)
at /usr/include/qt5/QtConcurrent/qtconcurrentfunctionwrappers.h:80
#14 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIteration (it=..., this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:68
#15 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIterations (this=0x555557757ee0,
sequenceBeginIterator=..., beginIndex=<optimized out>, endIndex=15) at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:77
#16 0x00007ffff67d2c9d in QtConcurrent::IterateKernel<QList<RProperty>::iterator, void>::forThreadFunction (this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentiteratekernel.h:255
#17 0x00007ffff44b5b2d in QtConcurrent::ThreadEngineBase::run (this=0x555557757f20) at qtconcurrentthreadengine.cpp:302 #18 0x00007ffff59c8d52 in QThreadPoolThread::run (this=0x555556198b10) at thread/qthreadpool.cpp:100 #19 0x00007ffff59c5a61 in QThreadPrivate::start (arg=0x555556198b10) at thread/qthread_unix.cpp:329 #20 0x00007ffff546c717 in start_thread (arg=<optimized out>) at pthread_create.c:435 #21 0x00007ffff54f018c in clone3 () from /lib64/libc.so.6 (
|
|
2314 | QCAD (main) | Bug Report | Low | Combobox Width too Small When Using Themes | Closed | |
|
Task Description
Hi Andrew
The Pre-Installed & User Generated Themes Affect Some Comboboxes Others May Also be Affected But I’ve Only Noticed These Recently.. They Appear to be OK with Default & Dark Themes Though..
Cheers John
QCAD/CAM Version: 3.26.4 “File:Autosave”
Version: 3.26.4.13 snapshot “Widgets:Property Editor & File:Autosave” Build Date: Nov 18 2021 Revision: fbb9f37 Qt Version: 5.8.0 Architecture: x86_64 Compiler: gcc 4.8.1
|
|
2313 | QCAD Community Edition | Bug Report | Low | qcad-3.26.4.14. build error due to missing qt project f ... | Closed | |
|
Task Description
cd ../qcad-3.26.4.14.tar.gz/ && ( test -e Makefile || /usr/lib/qt5/bin/qmake -o Makefile /home/li/下载/qcad-3.26.4.14.tar.gz/qcad-3.26.4.14.tar.gz.pro CONFIG+=ractivated ) && make -f Makefile debug Cannot find file: /home/li/下载/qcad-3.26.4.14.tar.gz/qcad-3.26.4.14.tar.gz.pro. make: *** [Makefile:308:sub—-qcad-3-26-4-14-tar-gz-debug_ordered] 错误 2
|
|
2312 | QCAD Community Edition | Bug Report | Low | Draw from CSV can not create Layers with NewLayer | Closed | |
|
Task Description
NewLayer always complains about a missing parent layer.
I could not figure out how to create Layers from a CSV file, I tried DrawCSV_Layer_test.csv which is a reference test from the qcad repo but NewLayer always returns “Parent layer doesn’t exist.”
Reading from file: /home/zem/DrawCSV_Layer_test.csv
Switched to semicolon/comma CSV style.
Layer doesn't exist, ignored. Text line 20 layer: 0 Entity Colors
Not a correct layer name. Text line 24 name: Invalid=`name`
Add/Update layer ignored.
Not a correct color. Text line 25 color: ByBlock
Add/Update layer ignored.
Not a correct Lineweight. Text line 26 weight: 999
Add/Update layer ignored.
Not a correct Linetype. Text line 27 type: Orange line
Add/Update layer ignored.
Parent layer doesn't exist. Text line 31 layer: MyLayerInvalid paren
Add/Update layer ignored.
Can not hide layer, ignored. Text line 34 layer: Invalid Hide
Can not freeze layer, ignored. Text line 35 layer: Invalid FreezeInvalid SUB
Can not lock layer, ignored. Text line 36 layer: Invalid Lock
Can not lock layer, ignored. Text line 37 layer: Invalid=`name`
Can not allow layer, ignored. Text line 38 layer: Invalid Allow
Can not switch to layer, ignored. Text line 39 layer: Invalid layer switch
Can not switch to layer, ignored. Text line 40 layer: Invalid=`name`
Parent layer doesn't exist. Text line 43 layer: 01 Gree
Add/Update layer ignored.
Parent layer doesn't exist. Text line 44 layer: 02 Parent
Add/Update layer ignored.
Parent layer doesn't exist. Text line 45 layer: 02 Parent1Sub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 46 layer: 02 Parent1Sub1SubSub1
Add/Update layer ignored.
Parent layer doesn't exist. Text line 47 layer: 03 Parent
Add/Update layer ignored.
Parent layer doesn't exist. Text line 48 layer: 03 Parent2Sub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 49 layer: 03 Parent2Sub2SubSub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 50 layer: 04 Parent
Add/Update layer ignored.
Parent layer doesn't exist. Text line 51 layer: 04 Parent3Sub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 52 layer: 04 Parent3Sub3SubSub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 53 layer: Last New &Curren
Add/Update layer ignored.
Can not hide layer, ignored. Text line 56 layer: 03 Parent2
Can not freeze layer, ignored. Text line 57 layer: 03 Parent2Sub2
Can not lock layer, ignored. Text line 58 layer: 03 Parent2Sub2SubSub2
Can not hide layer, ignored. Text line 60 layer: 04 Parent3
Can not freeze layer, ignored. Text line 61 layer: 04 Parent3
Can not lock layer, ignored. Text line 62 layer: 04 Parent3
Can not hide layer, ignored. Text line 63 layer: 04 Parent3Sub3
Can not freeze layer, ignored. Text line 64 layer: 04 Parent3Sub3
Can not lock layer, ignored. Text line 65 layer: 04 Parent3Sub3
Can not hide layer, ignored. Text line 66 layer: 04 Parent3Sub3SubSub3
Can not freeze layer, ignored. Text line 67 layer: 04 Parent3Sub3SubSub3
Can not lock layer, ignored. Text line 68 layer: 04 Parent3Sub3SubSub3
Can not allow layer, ignored. Text line 70 layer: 04 Parent3
Can not switch to layer, ignored. Text line 76 layer: 02 Parent1Sub1SubSub1 %
Layer doesn't exist, ignored. Text line 82 layer: 02 Parent1
Can not switch to layer, ignored. Text line 85 layer: 02 Parent1Sub1SubSub1 %
Casted entries : 4 with 90 text lines
Importing CSV complete. Command ended.
No layers are added in the resulting drawing.
OS here is fedora 34 and qcad is either from fedora or rpmfusion.
|
|
2311 | ECMAScript | Bug Report | Low | Odd self-intersection point for spline shapes | Closed | |
|
Task Description
Andrew,
Encountered with snapshot 3.26.4.9 On both a 32bit win7 and a Linux machine. But probably not related to version nor OS.
The calculated area centroid position for a self-intersecting shape is invalid. Therefor polylines and splines are checked for their self intersection nature. Polylines with line segments require a tolerance of 1e-6. For polylines with arc segments there is no easy to formulate value. Reverted to something less strict than the arc connect tolerance: 1.1e-3 Refer to: https://www.qcad.org/rsforum/viewtopic.php?f=30&t=8526&p=34056#p33694
RSpline.getSelfIntersectionPoints() has no tolerance value.
Some perfect valid spline shapes fail this test. Not related to the XP spline approx tolerance preference. Related to orientation, try the failing shape when reversed in situ. Related to their position in the plane, see translated examples.
Reproducible with control point splines. Reproducible when rotating the shape. Such failing closed splines can be hatched and an area centroid is returned.
Regards, CVH
PS: Got a notice posting this: “Notice: Trying to access array offset on value of type bool in /home/qcadch/public_html/bugtracker/scripts/details.php on line 222”
|