|
2345 | QCAD (main) | Bug Report | Low | File > Print: printing multiple copies prints too many ... | Closed | |
|
Task Description
File > Print Set copies to 2 4 sheets are printed.
|
|
2346 | QCAD (main) | Bug Report | Low | Access to Command: Line by pressing space bar | Closed | |
|
Task Description
On the current version of QCAD (used on a M1 MacBook Pro) you can set a keyboard shortcut timeout which I have set to 5000, 5seconds is ok to press two keys and press return. However I find this this method of selecting the command line is not consistent, its selection time varies from approx 0.5sec up to 5sec which leads to incorrect command selection.
To get around this at preset I use a mouse click to select the command line which works every time.
An option not to use the keyboard time would be better so the space bar selects command line, return key executes and closes or Esc cancels and closes selection
Hope you can look into this Regards Paul
|
|
2349 | QCAD (main) | Feature Request | Low | Imperial drawings doesn't accept imperial scales for Vi ... | Closed | |
|
Task Description
Drawing inch / imperial
If I add a Viewport imperial scales for that Viewport like 1” = 32’ are not accepted. Accepted are only metric scales like 1/100.
Please see also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=9206
|
|
2352 | QCAD (main) | Feature Request | Low | parallel tool instances | Closed | |
|
Task Description
Hello, I’ve quite often the task to transfer changes from one set of drawings to another (similar) set. My ideal setup would be to open one set in one window and the other set in another window. Both windows would be aranged side-by-side (larger monitor). Unfortunately Qcad (I’m using the Pro version) does not allow to be started twice in parallel. Not even Qcad-trial runs concurrently to Qcad-Pro.
So my request is to be able to run two instances of Qcad-Pro in parallel.
It’s ok if the second instance is in a kind of read-only mode where neither data not tool-settings can be changed. It’s also ok if number of concurrent instances is limitted to 2.
Best regards, Klaus
|
|
2356 | QCAD (main) | Bug Report | Low | File > Close: Closing dialog stays open after clicking ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9273
Note: drawing stays “modified” after saving from dialog.
|
|
2358 | QCAD (main) | Bug Report | Low | Paste: flip vertical broken | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9275
|
|
2359 | QCAD (main) | Bug Report | Low | Pieces of text disappear | Closed | |
|
Task Description
Note that my operating system is Windows 11. Recently updated from 32 bit (3.24.3.0) on old machine to 64bit version (3.27.3) on new computer. Old drawings transferred across to new version. Now bits of text missing. I can overcome bits of text missing by selecting View-Screen based Linetypes but when I print the text has bits missing once again. Some text appears and then disappears as you zoom in and out and selecting View screen based linetypes has no effect. Also I have noticed that the special character Ohm symbol shows as ? on screen. Also not possible to put Italic letters on drawing.
|
|
2360 | QCAD (main) | Bug Report | Low | Special characters and italic letter issues | Closed | |
|
Task Description
Many thanks Andrew for your input on task FS#2359 . However there were two other issues mentioned in the first task that seem to have been overlooked. Italic text appears and disappears as I zoom in and out and if I try to insert italic text it will not show as italic on screen. Also when I try to insert an ‘ohm’ special character I only get a ‘?’ question mark. Apologies if I’m doing something silly !! Regards Richard
|
|
2361 | QCAD (main) | Bug Report | Low | View > Property Editor: Draw order property not working | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9288
|
|
2362 | QCAD (main) | Bug Report | Low | View > Property Editor: Scale property cannot be edited | Closed | |
|
Task Description
The scale property for viewports cannot be edited.
|
|
2363 | QCAD (main) | Bug Report | Low | Context menu of line entry fields: inserting symbol bro ... | Closed | |
|
Task Description
Unicode is inserted instead of symbol from line edit context menus.
|
|
2364 | QCAD (main) | Bug Report | Low | Block > Edit Block in Place: working set selection not ... | Closed | |
|
Task Description
Case: open “Edit Block in Place”, select entity or block like you would do to “Add to Working Set”, don’t add - instead cancel “Edit Block in Place”, selection color stay on even it is not treated anymore as selected, to solve that you need to go back into “Edit Block in Place” mode to deselect the entity.
|
|
2365 | QCAD (main) | Feature Request | Low | PDF Import: add support for clipping | Closed | |
|
Task Description
Add support for clipping (FPDF_CLIPPATH).
|
|
2366 | QCAD (main) | Bug Report | Low | File > Advanced SVG Export: not launching | Closed | |
|
Task Description
Exception when populating scale combo box
|
|
2367 | QCAD (main) | Bug Report | Low | Command line arguments not correctly encoded | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=9310
|
|
2368 | QCAD (main) | Bug Report | Low | Projections: attributes are not projected | Closed | |
|
Task Description
Affects all projection tools including the dwgmapconvert command line tool.
|
|
2369 | QCAD (main) | Bug Report | Low | File > Menu Open and Import fails for pdf | Closed | |
|
Task Description
Command Open and Import fails for pdf
Forum report: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9332&p=37508#p37508
|
|
2372 | QCAD (main) | Bug Report | Low | Rendering text with \p... escape sequences | Closed | |
|
Task Description
I imported a DXF using the professional version qcad-3.27.6-pro-linux-x86_64 and all text strings have codes prefixed to them like “ql;”. When opening in QCAD qcad-3.25.2-trial-linux-x86_64 the text loads correctly though. Others have confirmed that this seems to be a regression and a non-issue in other viewers: https://www.qcad.org/rsforum/viewtopic.php?p=37667
Here is a file with a single circle and single text number “1” which currently appears as “ql;t0;1”.
|
|
2373 | QCAD (main) | Bug Report | Low | File > SVG Export: ellipse arcs in non-uniformly transf ... | Closed | |
|
Task Description
Ellipse arcs in non-uniformly transformed blocks are exported incorrectly when the “preserve geometry” option is used.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9388
|
|
2375 | QCAD (main) | Bug Report | Low | Edit > Copy: Draw order of copied block reference chang ... | Closed | |
|
Task Description
If I apply “copy with reference” to any block, the block’s draw order is changed to -2147483648 (-0×80000000).
|
|
2376 | QCAD (main) | Bug Report | Low | Mac Deployment: plugins don't load on case sensitive fi ... | Closed | |
|
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9404
|
|
2377 | QCAD (main) | Bug Report | Low | Modify > Detection > Detect Duplicates: Apply tolerance ... | Closed | |
|
Task Description
Bounding boxes are compared with fixed tolerance.
|
|
2379 | QCAD (main) | Bug Report | Low | Measures disappearing from DXF file | Closed | |
|
Task Description
We have a client complaining that measures are disappearing from DXF file when it is opened in QCad, but remain visible when exporting the same file in JPEG format. Please see attached files for an example.
Stand-alone QCad version used is 3.26.2.
Version embedded in client application is unknown (awaiting information).
Regards.
|
|
2380 | QCAD (main) | Bug Report | Low | SaveAs doesn't always open the associated path of the a ... | Closed | |
|
Task Description
QCAD Professional Win 7 WinInstaller
Version: 3.27.0.0 (3.27.0) Internet: QCAD.org Build Date: Nov 30 2021 Revision: 62c65de Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related topic: https://qcad.org/rsforum/viewtopic.php?f=31&p=37972#p37964
In script SaveAs.js on line 104 the sourced filename is correct. When this is not empty on line 147 the fileDialog should select this file in its own path. The testing sequence in the topic shows this is not always the case. I am using the system file dialog.
Firts setting the corresponding folder for the fileDialog seems to fix this: 147 if (fileName.length!==0) { 148 fileDialog.setDirectory(fileInfo.absolutePath()); 149 fileDialog.selectFile(fileInfo.absoluteFilePath()); 150 } 151 else { ....
Regards, CVH
|
|
2382 | QCAD (main) | Bug Report | Low | DGN file load / import fails | Closed | |
|
Task Description
dgn file load / import fails in Pro and Trial. https://www.qcad.org/rsforum/viewtopic.php?f=2&t=9444
Warnings:
|
|
2383 | QCAD (main) | Bug Report | Low | Dark Theme -> Layers Names are not visible | Closed | |
|
Task Description
If the Theme is chosen as Dark, the name of even layers in the Layer List is with white color and the name of background is also white. Please see the attachment.
Many thanks!
|
|
2384 | QCAD (main) | Feature Request | Low | need some help with copy with reference and paste | Closed | |
|
Task Description
Dear Mr Mustun,
I’ve got a problem similar to issue 2354.
Sometimes I have to create bigger drawings. Therefore I often create a “main drawing” and some “detail drawings”. I usually do the details in “detail drawing” and transfer them to “main drawing” by using “copy with reference” and “paste”. Until a few days ago it worked quite properly, but now it doesn’t anymore.
Today from issue 2354 I’ve learned that qcad doesn´t use windows clipboard. Can you tell me an alternative way to help me, please?
OS: Windows 11 Home QCAD: Professional 3.27 (.4 ?, purchased July 29th 2022) 64 bit
Sincerely, FW
|
|
2385 | QCAD (main) | Bug Report | Low | ScriptItems are inserted with the unit setting for a ne ... | Closed | |
|
Task Description
Tested on a Win7 32bit and a Win10 64bit system.
With App.Prefs defaults for new drawings set to mm, mm, metric. Inserting a ‘CubeCuttingOut’ with the default size 10 into a drawing in inch results in size 0.39370079” what is indeed 10mm.
One would expect it to be sized 10 units of the target drawing.
Recently reported by Husky concerning the QCAD Utilities by MikeJ. https://qcad.org/rsforum/viewtopic.php?f=30&t=9429&start=15#p38045
ScriptItems are first created on a new (offline) document. QCAD will then adapt the size with unit conversion. Then it will scale, rotate, flip according the ‘Insert Script’ tool options.
This is fully predictable for standard library items where the source is a dxf file with a defined unit and no unit conversion would occur if the library source unit was ‘None’.
I then assume that this can be fixed with setting the new RDocument in InsertScriptItem.prototype.beginEvent its unit to ‘None’. Not knowing what the intended behavior should be for any other case, source or usage ...
Regards, CVH
|
|
2389 | QCAD/CAM | Bug Report | Low | Import tools (KI) triggers a warning that the import fa ... | Closed | |
|
Task Description
... despite the fact it was successful.
|
|
2392 | QCAD (main) | Bug Report | Low | File > Save: Dimension override for linear format not s ... | Closed | |
|
Task Description
Dimension override for linear format not saved to file.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9536
|
|
2393 | QCAD Community Edition | Bug Report | Low | QCad crashes while loading plugins | Closed | |
|
Task Description
Please see this downstream bug report: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=265989
|
|
2394 | QCAD (main) | Bug Report | Low | crash whenn upload immage file or saving a project | Closed | |
|
Task Description
When i try to upload an immage Q cad professional edition last evrsion always crash, the same happens when i try to save a project.
|
|
2395 | QCAD (main) | Bug Report | Low | Incorrect new lightyear conversion value | Closed | |
|
Task Description
Seen https://github.com/qcad/qcad/commit/302010556a077f71b3de6c3c0f8f3df0282a5da9 And that all entries are a division by 1000
It is exactly 9 460 730 472 580 800 meter To return a correct factor to meters the value must be a factor 1000 larger.
131 return 9460730472580800000 / 1000;
More info: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=9506&p=38295#p38295
Kind regards, CVH
|
|
2399 | QCAD (main) | Bug Report | Low | Directly edit object's Y coordinate, with a formula, al ... | Closed | |
|
Task Description
Select an object, e.g. a block or text. Hit G P to open the object’s properties.
Select the text input for the X coordinate. Add the string +0.1 to the end. Hit enter. The coordinate is increased by 0.1.
Repeat this for the Y coordinate. The coordinate always becomes 1.
Repeat this a second time, for the Y coordinate, without closing the properties dialogue in between edits. The coordinate updates as expected, e.g. 1.1, 1.2, 1.3...
|
|
2400 | QCAD (main) | Bug Report | Low | View > Selection Filter: Entity type "Any" has no effec ... | Closed | |
1 |
Task Description
The “Any” filter matches no entities.
|
|
2401 | QCAD (main) | Bug Report | Low | File > Print / PDF Export: Page size always A4 | Closed | |
1 |
Task Description
Only prints on A4 size paper, no matter what settings, print or pdf export, print from model or from layout block
Version: 3.27.7.0 (3.27.7) Internet: QCAD.org Build Date: Sep 29 2022 Revision: 58ecdde Qt Version: 5.13.2 Architecture: x86_64 Compiler: MSVC++ 14.0 (2015)
|
|
2402 | QCAD (main) | Bug Report | Low | Selection Filter fails for different filter scenarios. | Closed | |
|
Task Description
Please refer to the user report below: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9586&p=38653#p38653 Note: 3.27.6.0 (3.27.6) works as intended.
Thanks.
|
|
2403 | QCAD (main) | Bug Report | Low | Print Preview Page Not The Same As Output | Closed | |
|
Task Description
Hi Andrew
When I Print or save as PDF the paper settings don’t seem to be working.... The output file does not match..
See Forum Post https://qcad.org/rsforum/viewtopic.php?f=33&t=9587&p=38662#p38662
Cheers John
|
|
2404 | QCAD (main) | Performance Issue | Low | Extreme Lag When Selecting Solid or Pattern Hatch | Closed | |
|
Task Description
Hi Andrew
I get Extreme Lag When Left Click and Selecting Solid or Pattern Hatch...
Please See Thread in Forum... https://qcad.org/rsforum/viewtopic.php?f=33&t=9588&p=38670#p38670
Screenshot & DXF Attached for your convenience ..
Version: 3.27.7.0 (3.27.7) Build Date: Sep 30 2022 Revision: 62d387f Qt Version: 5.14.2 Architecture: x86_64 Compiler: gcc 5.4.0
Cheers John
|
|
2406 | QCAD (main) | Bug Report | Low | File > SVG Export: wrong arcs in blocks with negative s ... | Closed | |
1 |
Task Description
When using SVG export on a drawing with a block defined, the export is incorrect. Arcs are drawn incorrectly and parts of the block are missing. If that block is exploded, the SVG export is correct. Attached is a block on the lower left and the same block on the lower right after explode. Also attached is the resulting SVG file. This is not always the case. Some blocks are correctly exported to SVG. The upper row is again a block on the left and the same block exploded on the right. It exports properly.
|
|
2407 | QCAD (main) | Bug Report | Low | App stalling for Trace Bitmap with no image in selectio ... | Closed | |
|
Task Description
Andrew,
Trace Bitmap requires a selection. QCAD stalls when the first entity id is not an RImageEntity .
The prevImageEntity.getFileName() in the beginEvent will throw an exception for all but an RImageEntity.
The odds are against us that in a multiple selection an image is the first id.
I think you need to filter on image entities like later in the applyOperation function.
Regards, CVH
|
|
2408 | QCAD (main) | Bug Report | Low | Length of Hatch entity sums the length of the patterned ... | Closed | |
1 |
Task Description
Andrew,
When selecting a Hatch entity: For a solid filled Hatch the boundaries total length is given. With a pattern that returns the summed length of the patterned lines.
I think that the recent performance update for RHatchData::getLength returns something different than intended.
Regards, CVH
|
|
2409 | QCAD (main) | Bug Report | Low | Area measurement of hatches leads to a crash of QCAD | Closed | |
|
Task Description
Reported in the QCAD Forum by TSG on a macOS Catalina system. Details on this topic can be found at https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9603#p38738.
|
|
2410 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Graphics View > Fonts: ... | Closed | |
2 |
Task Description
Edit: And it fails often to read the menu at all at the first time. A second try will display the information ...
|
|
2411 | QCAD (main) | Feature Request | Low | Report hatching loop errors in the user defined coordin ... | Closed | |
1 |
Task Description
Andrew,
In “Loop not closed at point 120.079/259.997.” we can not use the coordinate as such. With my preferences I would need 120,079;259,997 as a valid coordinate to enter in the command line. I do this ‘translation’ in between in Notepad.
Not that personally my boundaries are frequently off
Reported by <OttoZ> in: https://www.qcad.org/rsforum/viewtopic.php?f=89&p=38836#p38829 ‘Die Koordinaten lassen sich nicht kopieren, sonst könnte man zur Fehlstelle springen.’
In all cases the “/” is not a valid Cartesian coordinate separator. The dot at the end of the sentence is also not so common in QCAD.
Regards, CVH
|
|
2412 | QCAD (main) | Bug Report | Low | Request for option | Closed | |
|
Task Description
For what I use QCad for it would be extremely helpful - and likely quite simple to implement - to have an option to display values (e.g. measurements of position and length) in inches only instead of feet and inches. I suppose if I were working in metric units the same idea would apply to centimetres only instead of metres + centimetres. Consider you have a line segment whose x-position is 3’ 11 17/32” and you need to move it by 2’ 7 13/64”. The math would just be a lot simpler if the “feet” measure were in inches - so 47 17/32” and 31 13/64”.
|
|
2413 | QCAD (main) | Bug Report | Low | Layer > (De-)Select Layer Entities: Default shortcuts Y ... | Closed | |
|
Task Description
Shortcut Y+, Y- fails for selecting Layer Entities in a Layer List. Letter is ignored and +, - zooms the drawing
|
|
2414 | QCAD (main) | Bug Report | Low | Shortcut YR, YE etc fails when layer is marked. | Closed | |
|
Task Description
Shortcut YR, YE etc. fails for marked Layer. It works at active layer.
|
|
2417 | QCAD (main) | Bug Report | Low | Insert Measurement/e.g. d1 Point to Point fails within ... | Closed | |
|
Task Description
Insert Measurement / e.g. Point to Point fails within Coordinate (SX) dialog. It is offered for X and Y but I can’t find a way to use it. For a proper measurement with IP I need to use Autosnap etc. but that means I have to switch from Coordinate snap to an other snap with no way to return to use the d1 variable.
|
|
2419 | dwg2csv | Bug Report | Low | dwg2csv quote handling | Closed | |
1 |
Task Description
When a text string contains a double quote(”) character, the value is not quoted. If the text string contains a comma, the value is quoted (using double quotes).
When a text string starts with a double quote, it is unclear which of the above two states is correct, making for difficult parsing. (Excel seems to assume the second state when possible)
It would make parsing much easier if the output csv followed the format provided in rfc4180, namely that
If fields are not enclosed with double quotes, then double quotes may not appear inside the fields (2.5)
If double-quotes are used to enclose fields, then a double-quote appearing inside a field must be escaped by preceding it with another double quote (2.7)
|