QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
 1517 QCAD (main)Bug ReportLow Modify > Break out Segment: fails with closed polyline Closed
100%
1 Task Description

Occurs when breaking out segment from closed polyline with more than two intersecting entities.

This also affects the hatch from segments tool when used with closed polylines.

Example:
https://raw.githubusercontent.com/qcad/qcad/master/scripts/Modify/BreakOut/Tests/data/closed_polyline.dxf

 1525 QCAD (main)Bug ReportLow Block attributes: escaped unicode sequences in files no ...Closed
100%
1 Task Description

The characters in Portuguese such as “ç é â ... etc ...” are replaced by codes starting with version 3.16.x
Files created with versions of QCAD 3.15.x whose characters were correct in the Properties List when opened by QCAD 3.15.x appear in this strange way when opened in versions 3.16.x.
However, in the screen and in the extraction of the list of attributes the characters are correct.
Apparently the error only occurs in texts on the Block Properties List and Attributes.
However, you can use correctly the characters in a file created from version 3.16.x

Exemplo: “dormitory’ in portuguese is “dormitório” it’s appear like “DORMIT\U+00d3RIO” when file is opened on QCAD 3.16.x

1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

 1530 QCAD (main)Bug ReportLow Draw > Circle > 3 Tangents: solutions not found Closed
100%
1 Task Description

Given is a drawing of two concentric arcs connected at the ends. (see attached drawing Circle_from_3_Tangents_1.png)

When I try to add a circle at one end by the “Circle from 3 Tangents”-tool, it does nothing.

I also tried it with another drawing (see attached drawing Circle_from_3_Tangents_2.png) - same negative result.

I then tried drawing Circle_from_3_Tangents_3.png. Here the tool only produces outside circles and misses the inside ones.

Hope you can confirm my findings.

 1535 QCAD (main)Bug ReportLow File > Save: image references of deleted images remain  ...Closed
100%
1 Task Description

by inserting and deleting many figures in the drawing the references to these figures are not excluded from the dxf / dwg file structure, if you exclude a figure and include it again, the reference is duplicated, etc .. this causes an increase of the size of the files dwg / dxf.

 1539 QCAD (main)Feature RequestLow One more "Offset" option: Infinitive Line ... Closed
100%
1 Task Description

hi,

I miss one Offset option to use an offset indirectly related to the used entity. Right now I have to work with further construction lines and trim, divide, delete etc. tools to archive what I need.
Basically an offset as a ray would be enough but unfortunately we have no control of the Ray orientation.
This said - it would be nice to have an infinitive line added to the “Offset Polyline Segment” option to be able to use an Offset as construction line which is not only reflecting the shape of the source.

1541QCAD (main)Feature RequestLowView > Zoom > Zoom In/Out: Make zoom factor configurabl...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

 1543 QCAD (main)Bug ReportLow Input with dead-keys broken (Linux) Closed
100%
1 Task Description

Latin characters do not work in version 3.16.5 on Linux, such as ã, õ, é, à, the curious thing is that “ç-” works. If on your machine the Latin characters that do not work are not appearing follow a bitmap for visualization.

 1548 QCAD (main)Bug ReportLow Block > Attributes > Synchronize Attributes: exception Closed
100%
1 Task Description

Block attributes are not properly synchronized on QCad 3.16.5 after editing the block in the drawing, in Linux Mint 18.1 and in Windows 10; On Windows as less frequency, the error is intermittent, on Linux is constant. Attach the dxf to test.

1552QCAD (main)Feature RequestLowLayers: assign different color for printingAssigned
0%
1 Task Description

Original request:

https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4768

1555QCAD (main)Feature RequestLowExport list of points.Assigned
0%
1 Task Description

Hello
It would be great when you can add a function to export a selected object as a list of points.
Is it possible to add?

Autodes DWG TrueView 2017 has this function and it is very useful.
Here you can see a screenshot of this function.

 1558 QCAD (main)Bug ReportLow unlayed lines Closed
100%
1 Task Description

DWG archive opened by QCAD (15.X/16.X - Linux mint 18.1 and Windows 10) does not show traits that represent project windows, when the same file is opened by the dwg True view they appear, follows archive for evaluation.

 1566 QCAD (main)Bug ReportLow Block > Attributes > Synchronize Attributes: deleted bl ...Closed
100%
1 Task Description

Deleted (undone) block attributes are stored to DXF/DWG.

1567QCAD (main)Feature RequestLowAdd support for separate windowAssigned
0%
1 Task Description

Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already.
That would help a lot when working on multiple files and copying blocks between.

1570QCAD (main)Feature RequestLowmake the stretch tool more flexible in selecting nodesAssigned
0%
1 Task Description

Stretching multiple points of an entity is not possible to my knowledge. I
can use the stretch tool but this gives me a rectangular selection box and
this limits my posibilities. For example when entities are over eachother.
I hope that in the future this will become more like blender. With a freedraw
selection tool and/or shift clicking multiple nodes.

1576QCAD (main)Feature RequestLowadd option to switch off dialog for modify: rotate tool...Assigned
0%
1 Task Description

To improve the flow of drawing I’d like to switch off the dialog for the rotate tool. Most of the times i use the interactive input and delete the original. So I don’t need to click a popup to acknowledge that.
I allready use the same option for the move/copy tool.

1577QCAD (main)Feature RequestLowPostfix for DIM / Remember last DIM Label ...Assigned
0%
1 Task Description

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

 1599 QCAD (main)Bug ReportLow Commandline - Can not insert @ - No relative coordinate ...Closed
100%
1 Task Description

Hello,

since 3.17.1 (also on 3.17.2.0) it’s impossible to insert “@” in commandline, so it’s impossible to work with relative coordinates in all funktions like rectangle, line etc.
Please do a fast Bugfix, I need that functionality for workflow urgently :-)

Regards

Andreas

Linux Mint 64bit
Cinnamon
Kernel 4.11.6

QCAD 3.17.2.0

 1605 QCAD (main)Bug ReportLow Edit > Paste: Empty layers created when pasting to curr ...Closed
100%
1 Task Description

Copy - Paste to current layer from an other drawing creates empty layers, where the entities orininated from, in the drawing where they are pasted to.

1613QCAD (main)Feature RequestLowAdd Orthogonal Option to Angelur DIM Tool ...Assigned
0%
1 Task Description

... please see below:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

 1637 QCAD (main)Bug ReportLow Buttons Layer List Widget acting on other open file  Closed
100%
1 Task Description

With multiple files open 4 of the 5 buttons of the Layer List Widget are acting on an other file that is open instead of acting on the file in focus.
in this condition only Add Layer YA acts on the file in focus.

Not easy to reproduce.
Encountered it more frequent
after copy with ref and pasting.
with more then 2 files open.
with similar drawing file names.
Did reproduce after several hopping between files.
Usually acts on the first open file but this can be different as in the example.

workarround none; save all; close all; close Qcad; reopen and redo.

 1648 QCAD (main)Feature RequestLow Uniform Layer listing in dropdown as in Layer List Widg ...Closed
100%
1 Task Description

The order layers are listed in dropdown boxes is different as how there are presented in the Layer List Widget.
Uniformity can shorten lookup time drastically with a large number of layers / sublayers.

1663QCAD (main)Feature RequestLowFeature Request: Export Layers as New DrawingAssigned
0%
1 Task Description

Hi!

in many tasks in qcad I ended up exporting one or several layers into individual files for some cnc jobs or further processing. So the steps I usually do are:

  • select all elements on the layer
  • paste into new drawing
  • sometimes rename layer names or attributes
  • adjust dimension settings
  • save and give name for drawing

Sometimes I have up to 100 layers I need to export like this, so an automatic export for all would be time saving too. But very often a “single click” export method would also help a lot. (e.g. inside the layer list an entry in the right click menue like “save as new file”). Also a multiple selection would be handy if more that one layer should end up in the new file. (e.g. select the three layers that need to be in the new document, then right click and save as new file). Maybe this is too much of changes needed inside the layer list - so something like a separate layer export dialogue would make sense.

When exporting many layers some variables for automatic naming of layers and filename would make sense e.g. user can specify basename_%L.dxf to get the basename_layername.dxf or just an increasing number.

For layers and attributes it is often needed to give a layer a certain name or color for different cnc processes (e.g. engraving and cutting for lasers) or to put everything on layer “0” because of some old CAM software that only supports content on layer 0.

probably many more details would make sense that I didn’t think of yet...

kind regards
Martin


1673QCAD (main)Feature RequestLowLayouts and Viewports: support polygonal viewportsAssigned
0%
1 Task Description

Add support for polygonal viewports

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1674QCAD (main)Feature RequestLowLayouts and Viewports: duplicate layout blockAssigned
0%
1 Task Description

Duplicate layout blocks

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

 1693 QCAD (main)Performance IssueLow Formatted text is not correctly displayed Closed
100%
1 Task Description

Texts justified and/or formatted in dxf or dwg files generated by Autocad not presented correctly when the file is opened by QCad, follow file for verification.

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

1714QCAD (main)Feature RequestLowDimension > Diametric: improve display when label is mo...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408

 1716 TranslationBug ReportLow Wrong plural forms in translations Closed
100%
1 Task Description

I found that words which has plural forms are translated in manner where only two forms are possible - like in English language. For example: “Object” and “Objects”. But other languages (for example Polish) very often have more than 2 plural forms.
There are also strings which use only one form (for example: “Reset label position of %1 dimension(s).”) but cardinal number placed in string point on more forms than one.
All these strings looks bad when translated and sometimes even in English. I mark most of them using comments:

http://translate.qcad.org/pl/qcad/translate/#search=plural&sfields=notes

http://translate.qcad.org/pl/qcadpro/translate/#search=plural&sfields=notes

http://translate.qcad.org/pl/qcadcam/translate/#search=plural&sfields=notes

I believe problem can be fixed using plural form strings: https://www.gnu.org/software/gettext/manual/html_node/Plural-forms.html

 1717 QCAD (main)Bug ReportLow small fix in startup script Closed
100%
1 Task Description

The current startup script fails when called through symbolic link due to string:

DIR=${0%/*}

It is better to change it to:

DIR=$(dirname -- $(readlink -f -- $0))
1722QCAD (main)Feature RequestLowOption to insert viewport at either of the rectangle co...Assigned
0%
1 Task Description

Hi Andrew,

Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.

Hope that makes sense.

Many thanks

Clive

1731QCAD (main)Feature RequestLowOption to place text to other sideAssigned
0%
1 Task Description

Hi Andrew,

It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(

Many thanks

C;live

1749QCAD (main)Feature RequestLowAdd support for non-uniform block scalingAssigned
0%
1 Task Description

Same txt as on the forum.
had a copy because i had to log in 3 times to remark my own post.

Blocks are no solution either.

see pdf
[attachment=0]Block test_1.pdf[/attachment]

Antartica is put in a block as segments.
Added a rounded corner as segments and as poly.
scaled X x0.5 Y x1 origin the center of the magenta circl.

The scaled version is all over the place.
Set them to color red, no use they stay black.

The reference of the block is 2000mm to the left because I tried it out far right of my design.
The cyan circle is about 400mm in diameter.

dxf part included
[attachment=1]Block test.dxf[/attachment]

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)

CVH

1755QCAD (main)Feature RequestLowSelecting standard rotation angles by mouse click for M...Assigned
0%
1 Task Description

This would be nice.
It will save a lot mouse - keypad changes for me.

 1764 QCAD (main)Feature RequestLow Zoom in with middle click Closed
100%
1 Task Description

I would suggest adding a feature Inkscape has, which is that a single middle click zooms in. This is not at the detriment of panning, since the mouse/pen (I use a Wacom tablet) doesn’t move. Right now middle click doesn’t do anything so I don’t think it should be a problem.

Another awesome and related Inkscape zooming feature is that Shift+middle click shifts to window zooming. But with the added bonus that you don’t lose the tool you’re in. Try it out on Inkscape if I’m not clear!

Cheers,
JFL

 1768 QCAD (main)Bug ReportLow Draw > Polyline > Create From Segments: segments delete ...Closed
100%
1 Task Description

‘Create From Segments’ ‘OG’ includes and admits selection of segments on locked layers.

A)
-When selecting a segment on a not locked layer it can include segments on locked layers that connect to the string. (Assumed wrong)
-A copy of the segments on the locked layer(s) are included in the polyline. (Assumed wrong)
These segments are not removed from the locked layer(s) because of their locked nature. (Intended behaviour)
eg. ‘OG’ & selecting the arc at point A in the example file. The arc is on a not locked layer.

B)
-When selecting a segment on a locked layer it will fully remove segments that connect to the string on not locked layers. (Assumed very wrong)
-Connecting segments on the locked layer(s) will not be converted to a polyline because of their locked nature. (Intended behaviour)
eg. ‘OG’ & selecting the line at point B in the example file. The cyan lines are on a locked Layer.

Both A & B can be undone.

The example is a part of the ‘Skewing project’.

Regards
CVH

1789QCAD (main)SuggestionLowApplication Preferences / General / Performance :0Assigned
0%
1 Task Description

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

 1793 QCAD (main)Bug ReportLow Ruler functionality is compromised by Auto Grid setting Closed
100%
1 Task Description

Regarding to an observation by the forum member Horst1803
http://www.qcad.org/rsforum/viewtopic.php?f=92&t=5725

The ruler functionality is compromised by Graphics View / Grid settings.
To show the full Ruler functionality “Automatic scale grid” has to be activated. I think that is not intended behavior.

Case: Appearance / Show rulers = activated

Application Preferences / Graphics View / Grid

on - Automatically scale grid
on - Automatically scale meta grid
off - Solid grid lines
= Rulers visible
= Graduation visible
= Labels visible

off - Automatically scale grid
on - Automatically scale meta grid
off - Solid grid lines
= Rulers visible
= Graduation invisible
= Labels invisible

 1803 QCAD/CAMBug ReportLow CAM configuration output unit fixed in inch instead of  ...Closed
100%
1 Task Description

Ij window CAM Configuration output unit appears as inch instead of mm. All parameters are in option
when create a nc file,units are in inches not in mm. unsuable and not possible to change

 1071 QCAD (main)Feature RequestVery Low (Bitmap) scaling convenience option Closed
100%
1 Task Description

This can be done as is in QCAD today, but a quick convenience UI bit would be much appreciated.

Suppose you are working off a bitmap image (transcribing old scan, or you got your apartment’s floor plan like this, because, uh, what tenant needs DXF). It has dimensions markers and everything, but fat chance it’ll be to actual CAD scale after importing.

So, to bring it to scale, you measure between two tick marks on the scale, compute ratio based on measurement and what’s written on the dimension line, and do a scale operation (you can also have QCAD compute the ratio by using math expression, whatever).

That works fine.

A purely just for convenience function to do that would be much appreciated: pick two points, enter what the actual distance between them is, poof bam, appropriate scaling operation is applied.

As a twist, there could be some other bitmap skewing options, like “the points I’ve selected are on a horizontal/vertical line/at an angle of X degrees, then the bitmap would also be applied this transform.

 1154 QCAD (main)Feature RequestVery Low Add preference for round reference points Closed
100%
1 Task Description

This one is purely cosmetic, instead of square reference points would it be possible to have the choice of either square or round with size?

 1460 QCAD (main)Bug ReportVery Low Two Display Environment --> Problems with Toolboxes and ...Closed
100%
1 Task Description

Hello,

I’m unsing a two display environment and got all Tools and Widgets placed on the second display.
See qcad1.png

There are two problems:

1.) When I open another application on second display, three toolboxes stay on top, the others are behind new application.
See qcad2.png

2.) When I minimize Qcad only the mainwindow will be minimuzed, all the toolboxes and widgets stay on second display also with problem 1.
See qcad3.png

Whould be great, when this issues will be fixed :-)

Thank you very much
Andreas

P.S.: Hope described well, if not, please drop me a reply...

 1607 QCAD (main)SuggestionVery Low Indent 'Spline Segments:' in explode preferences Closed
100%
1 Task Description

 FS#1604  was issued because of non-intuitive hierarchy of the preferences for the Explode function.
The task comment recieved explains the funcionallity in details not found elsewhere.

Indentation of the phrase ‘Spline Segments:’ suggest hierarchy.
Graying out the drop down box for the number of spline segments establish hierarchy.

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

 1743 QCAD (main)Bug ReportVery Low Draw > Text: Wrong bounding box for text with empty sup ...Closed
100%
1 Task Description

Hi,

I have a drawing where I use text with superscript. In this case when I use autozoom, it does not work as I expect. It includes the 0,0 coordinates too. The problem also occures when I export the drawing into svg.

I attached an example, just use the autozoom.

Thanks,
Soma


1765QCAD (main)Bug ReportVery LowErrors with polyline offsetAssigned
0%
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360° curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

 15 QCAD (main)Bug ReportCritical new created drawing can't be loaded Closed
100%
Task Description
  1. create new drawing
  2. draw a line
  3. save it as DWG or DXF
  4. close it
  5. re-open it → nothing is shown, nothings is selectable

no obvious errors or warnings in the console output

 222 QCAD (main)Bug ReportCritical MacOS X Lion Installation problem Closed
100%
Task Description

Installation problem.
After uneventful installation on MacOS X Lion 10.7.1 on a MacBook Pro Core I5 the QCAD will not launch by clicking into the app. When trying to launch the application by the command line I received an error message regarding the “plugin” folder, as follows:

al:MacOS everaldo$ ./QCAD
application directory: “/Applications/QCAD.app/Contents/MacOS”
working path: “/Applications/QCAD.app/Contents/Resources”
plugins folder does not exist

Renaming the folder from “/Applications/QCAD.app/Contents/PlugIns” to “Applications/QCAD.app/Contents/plugins” solved the problem.

Regards.

Everaldo de N. Peixoto
everaldo.peixoto@uol.com.br

 226 QCAD (main)Bug ReportCritical Editing and saving a file Closed
100%
Task Description

Hello,
Just started with the program. I opened drawing made under 2.2 pro to modify it. Everything works ok (deleting entities) but as soon as I start removing unused layers, I get an error message when trying to save my work (photo attached). The previouly saved file becomes an empty file...Working on Win7x64, logged as admin.
JJ

 814 QCAD (main)Bug ReportCritical PATCH - Qcad 3.0.14 and 3.1.0.3 : Patch to fix GCC 4.7  ...Closed
100%
Task Description

Hello,

When I try to compile Qcad 3.0.14 and 3.1.0.3 with Gcc 4.7.2 anf Glibc 2.17 on Mageia Linux 3 , I have the following error :

g++ -c -pipe -O2 -fPIC -Wall -W -D_REENTRANT -DQCAD_DLL -DPTHREADS -DHAVE_PTHREAD_H -DQT_NO_DEBUG -DQT_WEBKIT_LIB -DQT_SCRIPT_LIB -DQT_SCRIPTTOOLS_LIB -DQT_SVG_LIB -DQT_SQL_LIB -DQT_XMLPATTERNS_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/lib64/qt4/mkspecs/linux-g++ -I. -I/usr/include/QtHelp -I/usr/include/QtDesigner -I/usr/include/QtUiTools -I/usr/include/QtCore -I/usr/include/QtNetwork -I/usr/include/QtGui -I/usr/include/QtOpenGL -I/usr/include/QtXml -I/usr/include/QtXmlPatterns -I/usr/include/QtSql -I/usr/include/QtSvg -I/usr/include/QtScriptTools -I/usr/include/QtScript -I/usr/include/QtWebKit -I/usr/include -I../../../core -I../../../core/math -I../../../grid -I../../../snap -I../../../gui -I../../../entity -I../../../operations -I../../../scripting -I../../../stemmer -I../../../scripting/ecmaapi -I../../../scripting/ecmaapi/generated -I../../../scripting/ecmaapi/adapters -I../../../io/dxf -I../../../spatialindex -I../../../3rdparty -I/usr/include -Irelease -o release/opennurbs_brep_tools.o ../opennurbs_brep_tools.cpp
In file included from ../opennurbs.h:42:0,

               from ../opennurbs_brep_tools.cpp:16:

../opennurbs_base64.h:130:22: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
In file included from ../opennurbs.h:93:0,

               from ../opennurbs_brep_tools.cpp:16:

../opennurbs_light.h:115:34: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
../opennurbs_light.h:116:40: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
../opennurbs_light.h:117:33: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
../opennurbs_light.h:118:35: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
../opennurbs_light.h:119:40: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
../opennurbs_brep_tools.cpp: In function ‘bool CheckForMatchingVertexIndices(int, int, int*)’:
../opennurbs_brep_tools.cpp:399:13: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
../opennurbs_brep_tools.cpp: At global scope:
../opennurbs_brep_tools.cpp:1981:11: warning: unused parameter ‘start_point’ [-Wunused-parameter]
../opennurbs_brep_tools.cpp:1986:11: warning: unused parameter ‘end_point’ [-Wunused-parameter]
../opennurbs_brep_tools.cpp:2031:11: warning: unused parameter ‘end_point’ [-Wunused-parameter]
../opennurbs_brep_tools.cpp: In member function ‘bool ON_Brep::CloseTrimGap(ON_BrepTrim&, ON_BrepTrim&)’:
../opennurbs_brep_tools.cpp:2084:7: warning: variable ‘coord1_lock’ set but not used [-Wunused-but-set-variable]
../opennurbs_brep_tools.cpp: At global scope:
../opennurbs_brep_tools.cpp:2337:6: warning: unused parameter ‘min_degree’ [-Wunused-parameter]
In file included from ../opennurbs_array.h:1548:0,

               from ../opennurbs.h:47,
               from ../opennurbs_brep_tools.cpp:16:

../opennurbs_array_defs.h: In instantiation of ‘bool ON_SimpleArray<T>::HeapSort(int (*)(const T*, const T*)) [with T = int [2]]’:
../opennurbs_brep_tools.cpp:2769:21: required from here
../opennurbs_array_defs.h:463:7: error: ‘ON_hsort’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive]
In file included from ../opennurbs.h:67:0,

               from ../opennurbs_brep_tools.cpp:16:

../opennurbs_math.h:1403:6: note: ‘void ON_hsort(void*, size_t, size_t, int (*)(void*, const void*, const void*), void*)’ declared here, later in the translation unit
make[5]: * [release/opennurbs_brep_tools.o] Error 1
make[5]: Leaving directory `/home/user/projet-qcad/qcad-3.0.14.0/src/3rdparty/opennurbs/opennurbs’ make[4]:
* [release] Error 2

Showing tasks 201 - 250 of 1825 Page 5 of 37<<First - 3 - 4 - 5 - 6 - 7 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing