|
2480 | QCAD (main) | Feature Request | Low | Edit block in-place (BB) can't be terminated with Esc o ... | Closed | |
|
Task Description
Despite the toolbar “Cancel” option it would be nice if we could terminate BB also with an “Esc” or “QQ” keystroke like every other tool.
|
|
213 | QCAD (main) | Feature Request | Low | Edit Block from reference, how get back to the original ... | Closed | |
|
Task Description
It might be an oversight from my side, but when I do Edit Block from reference, I don’t see how I can go back to the original drawing.
|
|
174 | QCAD (main) | Feature Request | Low | edit block from insert | Closed | |
|
Task Description
implement
|
|
2020 | QCAD (main) | Bug Report | Low | Edit > Paste: Wrong position for block references with ... | Closed | |
|
Task Description
Open the example drawing, selected all, copy to clipboard, open new drawing, paste clipboard content with a scale of 1:1, check preview = everything ok, change scale to 1/10 etc., check preview = block references way of.
QCAD Pro Version 3.24.0.1
|
|
1579 | QCAD (main) | Bug Report | Low | Edit > Paste: rotation leads to wrong position of block ... | Closed | |
|
Task Description
Copy block reference in drawing with one unit (e.g. Inch). Paste into drawing with other unit (e.g. Millimeter) using a rotation while pasting.
|
|
1791 | QCAD (main) | Bug Report | Low | Edit > Paste: relative zero point not set | Closed | |
|
Task Description
If I insert a content from the Clipboard to the drawing a new Relative Zero Point isn’t created. I’m not able to use e.g. a restriction regarding to the last inserted content. QCAD will use the last Relative Zero Point in the drawing even if I already inserted a content.
Screenshot: Clipboard content = circle
1. First insert
Restriction horizontal
2. Second insert
|
|
1605 | QCAD (main) | Bug Report | Low | Edit > Paste: Empty layers created when pasting to curr ... | Closed | |
1 |
Task Description
Copy - Paste to current layer from an other drawing creates empty layers, where the entities orininated from, in the drawing where they are pasted to.
|
|
1248 | QCAD (main) | Bug Report | Low | Edit > Duplicate: only duplicate selected entities | Closed | |
|
Task Description
Edit > Duplicate duplicates all
|
|
1561 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences: menu missing (macOS, French ... | Closed | |
|
Task Description
Qt menu heuristic causes Edit > Drawing Preferences to disappear with French locale under macOS.
Edit > Application Preferences and Help > About are moved to erroneous locations as well.
|
|
1609 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences: dimension size scale cannot ... | Closed | |
|
Task Description
Load “Bemassung.dxf” Edit > Drawing Preferences > Dimension > Dimension Settings > Size scale factor: set to 1 Edit > Drawing Preferences > Dimension > Dimension Settings > Size scale factor reverts to 0.5
See: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4926&start=15#p18229
|
|
1316 | QCAD (main) | Feature Request | Low | Edit > Drawing Preferences: add global linear factor | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3846
|
|
2442 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences > Printing > Page: Paper siz ... | Closed | |
|
Task Description
Setting the paper size to A5 yields an invalid page size.
|
|
2549 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences > Printing > Multi Pages > S ... | Closed | |
|
Task Description
Clicking “Set to Printer Margins” has no effect.
|
|
2554 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences > Page Settings: scale not l ... | Closed | |
|
Task Description
Scale value is not loaded from drawing and shown as 1:1 if the scale is stored as a number.
|
|
1489 | QCAD (main) | Feature Request | Low | Edit > Drawing Preferences > Dimensions: Add option to ... | Assigned | |
2 |
Task Description
It would be extreamly useful to have an option to either use - or not use leader lines in the standard horizontal/vertical dimension line tools, some of the drawings I’m working on need the ‘standard’ looking dimensions with leader lines and some don’t. its a real pain to have to select - explode and delete all the leaders I don’t need.
Hoping for an option
Regards
Clive
|
|
1665 | QCAD (main) | Bug Report | Low | Edit > Drawing / Application Preferences > Point Displa ... | Closed | |
|
Task Description
Button for point display mode 99 broken.
|
|
1085 | QCAD (main) | Bug Report | Low | Edit > Cut/Copy with Reference: cannot use snap to coor ... | Closed | |
|
Task Description
If I use the Copy/Cut with Reference Clipboard function I can’t use the “Coordinate” or “Polar coordinate” snap to determine the reference point. I have the feeling that just the option box isn’t shown ....
|
|
2375 | QCAD (main) | Bug Report | Low | Edit > Copy: Draw order of copied block reference chang ... | Closed | |
|
Task Description
If I apply “copy with reference” to any block, the block’s draw order is changed to -2147483648 (-0×80000000).
|
|
1404 | QCAD (main) | Bug Report | Low | Edit > Copy / Paste: preserve drawing order | Closed | |
|
Task Description
The very first entity drawn / loaded does not preserve its drawing order when copied / pasted.
|
|
1617 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: Views in view list not con ... | Closed | |
|
Task Description
Case: Drawing in mm with Entries in the View List, Convert (CU) drawing from mm to inch, View List still exist but has lost the coordinates for each defined window,
|
|
1616 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: leader arrow switched off | Closed | |
|
Task Description
Case: Existing Leader with Arrow status “yes” in drawing, launch “Convert Drawing Unit”, convert drawing unit, Leader status for Arrow “yes” is now changed to “no”,
|
|
1597 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: dimension scale override s ... | Closed | |
|
Task Description
Drawing unit conversion sets the dimension scale override property for all dimensions, even if it was 0 before.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4926
|
|
2322 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: dimension problem | Closed | |
|
Task Description
If I convert to an other unit it will only change the unit name - no dim (Existing or new) is calculated regarding to the new unit.
|
|
1654 | QCAD (main) | Feature Request | Low | Edit > Convert Drawing Unit: convert viewports | Closed | |
|
Task Description
Converting the Drawing unit (CU) in Model Space will ruin all preexisting Viewport arrangements in your Layout Block. You have to rebuilt them from stretch or undo the unit conversion.
|
|
1876 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: block array spacing | Closed | |
|
Task Description
Block array column and row spacing not scaled in unit conversion.
|
|
1586 | QCAD (main) | Feature Request | Low | Edit > Application Preferences: Use different color for... | Assigned | |
|
Task Description
Add preference to use a single, configurable color for all locked layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4879#p17953
|
|
1776 | QCAD (main) | Bug Report | Low | Edit > Application Preferences: Tool Settings: cannot c ... | Closed | |
|
Task Description
Multikey shortcuts are broken in Qt. QCAD needs its own implementation of shortcut handling which also affects shortcut configuration.
|
|
1766 | QCAD (main) | Bug Report | Low | Edit > Application Preferences: Tool Settings: cannot a ... | Closed | |
|
Task Description
I wanted to add a couple of toolbars to the Tool matrix via the Tool Settings application preferences but all options are greyed out (see attached screenshot). I tried with a new config file and the result is the same. Is this the expected behaviour?
|
|
2477 | QCAD (main) | Bug Report | Low | Edit > Application Preferences: color preferences show ... | Closed | |
|
Task Description
Qt 6 compiled binaries show wrong default colors in preferences (always black).
|
|
1343 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Tool Settings: shortcu ... | Closed | |
|
Task Description
Shortcuts shown as part of tool title
|
|
2410 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Graphics View > Fonts: ... | Closed | |
2 |
Task Description
Edit: And it fails often to read the menu at all at the first time. A second try will display the information ...
|
|
1393 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Graphics View > Appear ... | Closed | |
|
Task Description
Application preference to show / hide scrollbars has no effect (scrollbars always shown).
|
|
2279 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > File > Open/Save: wron ... | Closed | |
|
Task Description
I have selected version 32 as the default file save format but new files default to version 27 when saved
|
|
1388 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Dimension Settings: Ar ... | Closed | |
|
Task Description
Change application preference to Architectural tick Create new drawing Dimension settings reverted to arrows
|
|
1669 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Defaults for New Drawi ... | Closed | |
|
Task Description
Blank QCAD template used as the start drawing.
Application Preferences / Dimension Settings
Text hight doesn’t accept anymore input 3.5/25.4 and it will change that in a new drawing to “0” instead to show 0.137795
If I remember correctly: Marked for “Keep proportions” = unchecked in new drawing is desired behavior, correct?
|
|
278 | QCAD (main) | Bug Report | Low | ECMAScript: all scripts should be read as UTF-8 | Closed | |
|
Task Description
Scripts that are included through the ECMAScript include function are read with a default constructed QTextStream. UTF-8 should be forced.
|
|
572 | Tests | Task | Low | Dylan | Closed | |
|
Task Description
http://www.askweddingdress.net black dresses http://www.askweddingdress.net discount bridesmaid dresses hour markers arms. Apart from some time indicator, this timepiece also contains a date indicator discovered on three o’clock. This look at can also be created to become appropriate for diving with its 300 meters h2o resistance. http://www.askweddingdress.net informal beach wedding dresses Although it could absence a chronograph http://www.askweddingdress.net orange bridal dresses , this really is nonetheless definitely an incredible view to get underwater http://www.askweddingdress.net/evening-dresses.html vintage gowns dress . You’ll be able to get this Longines Hydro Conquest for an approximate cost of $1 http://www.askweddingdress.net cheap dresses under http://www.askweddingdress.net formal wedding dresses cheap ,a hundred and fifty.Longines Women Diamond ConquestThe new Longines Girls Diamond Conquest quartz observe helps make the sporty timekeeper a bit little bit additional female in design, whilst preserving the robustness on the unique, nondecorated see.Developing this edition with the look at, Longines employed the timeproven recipe: to create a dressier edition of the sporty view, just just take an current design and adorn it with diamonds.As an icing within the cake, the http://www.askweddingdress.net cheap long evening dresses http://www.askweddingdress.net plus evening dresses
|
|
1631 | dxflib | Bug Report | Low | dxflib: wrong definition of DL_POLYLINE3D flag | Closed | |
|
Task Description
DL_POLYLINE3D should be 0×8.
|
|
1485 | dxflib | Bug Report | Low | dxflib: Lines are on the wrong layer when processing dx ... | Closed | |
|
Task Description
I create a drawing using QCAD which is stored using dxflib. For some reasons dxflib must be used. This drawing contains arcs and lines on a separate layer. If the dxf file is processed by an other tool only the arcs are referenced to the specific layer. The lines are referenced to the standard layer 0. It doesn’t matter if I’m using the community edition or the pro edition.
After a some investigations I found that the created dxf file is not correct. I manually corrected the dxf file and it works as it should.
For details please refer to the appended files. Take a look to the ENTITY section and the LINE entities, e.g. line 2370. It is just to swap two entities.
Thanks for support.
|
|
1139 | dxflib | Bug Report | Low | dxflib: leading / trailing spaces are removed from text | Closed | |
1 |
Task Description
dxflib strips leading / trailing spaces from text when importing DXF files.
|
|
1321 | dxflib | Bug Report | Low | dxflib: Handles not parsed correctly | Closed | |
|
Task Description
I did noticed a bug in the lib: Indeed, the handle numbers that DL_Dxf is parsing are in most case incorrect. I believe this is due to the way then handle number is parsed in DL_Dxf::processDXFGroups. The handle is parsed by calling the function getIntValue, which itself calls the function toInt to convert the handle from std::string to int by calling the function std::strtol(handle, NULL, 10). However, the handle numbers in a dxf file are stored as hexadecimal. I wrote a quick and easy fix to this issue, just tell me if you are interested!
|
|
1180 | dxflib | Bug Report | Low | dxflib cannot open files with international characters ... | Closed | |
4 |
Task Description
With dxflib, QCAD cannot open any file with Chinese file name or path name, it popups a “Important Error” dialog. But the writing (”Save As” command) with Chinese file name or path name is of no problem. Does it mean dxflib can only handle single byte characters file name/path name? WinXP, QCAD 3.8.0
|
|
1269 | QCAD (main) | Bug Report | Low | DXF/DWG import: layers with trailing / leading spaces d ... | Closed | |
|
Task Description
Layers with leading or trailing spaces are skipped when importing DXF/DWG files.
|
|
1866 | QCAD (main) | Bug Report | Low | DXF: EXTMIN/EXTMAX interchanged | Closed | |
|
Task Description
In the attached drawing, the origin is at the lower left, but $EXTMAX 10 = 0, 20 = .66473 and $EXTMIN = 10 = 3.2, 20 = 0
The X value for $EXTMAX should be 3.2 The X value for #EXTMIN should be 0
the following is an excerpt from the file $EXTMIN 10 3.2 20 0.664730029289 30 0.0
9
$EXTMAX 10 0.0 20 0.0 30 0.0
|
|
541 | QCAD (main) | Bug Report | Low | dxf not readable with QCad3 but was in QCad 2 | Closed | |
|
Task Description
I got a dxf (AC1006) from a client which is not readable by QCad 3 RC5 (”check file format...”) but is perfectly shown by QCad 2.2; opening in QCad 2.2, saving there and re-opening in QCad 3 does the trick.
|
|
280 | QCAD (main) | Bug Report | Low | dxf import: vertical text position | Closed | |
|
Task Description
see 404011_0310_001.dxf
|
|
282 | QCAD (main) | Bug Report | Low | dxf import: single line text: diameter, plus minus, ... | Closed | |
|
Task Description
dxf import: single line text: diameter, plus minus, degree shown as c, p, %%d
|
|
281 | QCAD (main) | Bug Report | Low | dxf import: show paper space by default | Closed | |
|
Task Description
dxf import: show paper space by default if whole drawing is constructed on paper space or read ‘current block’ from sxf if available.
|
|
747 | QCAD (main) | Feature Request | Low | DXF import: dimension label | Assigned | |
|
Task Description
Add support for custom dimension labels created in 3rd party applications. Such labels may contain text that is stripped by QCAD.
|
|
976 | dxflib | Bug Report | Low | DXF import errors related to hatches, texts | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677
|