|
1745 | QCAD (main) | Bug Report | Low | File > Bitmap Export: thick lines exported thin | Closed | |
|
Task Description
When exporting a drawing under latest version of QCAD, for whatever reason QCAD ignores all line thicknesses and there is no option to fix it. The error is in BitmapExportWorker.js (line 134). It should read:
view.setHairlineMinimumMode(false);
(currently, it uses “true” instead)
|
|
1746 | QCAD (main) | Bug Report | Low | File > Bitmap Export: File base name cut off in file sa ... | Closed | |
|
Task Description
A file with name of 1234.56.78.0001.00 Something blah blah.dxf will not export to bitmap correctly. The save dialog will suggest filename of 1234.56.78.0001.jpg instead, truncating everything after last dot.
This bug existed in older versions too because of incorrect handling of file names. As a result, at some point File.getSaveFileName incorrectly truncates the extension (which is empty at the time) and replaces it with jpg . Appending a null extension fixes this, though obviously it’s not a correct fix.
Here is a temporary workaround in File.js :
File.getInitialSaveAsPath = function(filePath, extension) {
var ret = "";
var fi;
if (isNull(filePath) || filePath.length === 0) {
var mdiChild = EAction.getMdiChild();
var fn;
if (!isNull(mdiChild)) {
fn = stripDirtyFlag(EAction.getMdiChild().windowTitle)
}
else {
fn = "File";
}
fi = new QFileInfo(QDir.homePath());
ret = fi.absoluteFilePath() + QDir.separator + fn + "." + extension + ".nothing"; // Workaround here
} else {
fi = new QFileInfo(filePath);
ret = fi.path() + QDir.separator + fi.completeBaseName() + "." + extension + ".nothing"; // Workaround here
}
return ret;
};
|
|
1748 | QCAD (main) | Bug Report | Low | error when editing block with attributes | Closed | |
|
Task Description
when editing a block and deleting one of the preferred attributes you need to restart the qcad so that the excluded attribute disappears from aba properties when the block is selected;even after synchronizing block attributes
|
|
1749 | QCAD (main) | Feature Request | Low | Add support for non-uniform block scaling | Closed | |
1 |
Task Description
Same txt as on the forum. had a copy because i had to log in 3 times to remark my own post.
Blocks are no solution either.
see pdf [attachment=0]Block test_1.pdf[/attachment]
Antartica is put in a block as segments. Added a rounded corner as segments and as poly. scaled X x0.5 Y x1 origin the center of the magenta circl.
The scaled version is all over the place. Set them to color red, no use they stay black.
The reference of the block is 2000mm to the left because I tried it out far right of my design. The cyan circle is about 400mm in diameter.
dxf part included [attachment=1]Block test.dxf[/attachment]
Version: 3.20.1.0 (3.20.1) Internet: QCAD.org Build Date: Apr 13 2018 Revision: dd51609 Qt Version: 5.5.1 Architecture: i386 Compiler: MSVC++ 10.0 (2010)
CVH
|
|
1752 | QCAD (main) | Bug Report | Low | Not selecting text with sub/superscript | Closed | |
|
Task Description
Found a strange behaviour with formatted text.
File attached. ‘Draw’-selecting only the yellow text with a little space arround it - L>R or R>L ⇒ Yellow text not selected.
‘Draw’-selecting only the yellow text with a little space from R>L but crossing the text half way - Yellow text Selected ⇒ Expected behaviour.
‘Draw’-selecting just including the mentioned little circles. - Orange L>R or R>L ⇒ Normal texts selected ⇒ Expected behaviour - Green L>R Yellow not R>L Yellow selected ⇒ Expected behaviour - Magenta L>R or R>L ⇒ Yellow text not selected ?? - Red L>R or R>L ⇒ Yellow text not selected ??
Version: 3.20.1.0 (3.20.1) Internet: QCAD.org Build Date: Apr 13 2018 Revision: dd51609 Qt Version: 5.5.1 Architecture: i386 Compiler: MSVC++ 10.0 (2010) Windows 7 32-bit
Kind Regards
|
|
1754 | QCAD (main) | Suggestion | Low | When Selecting multiple blocks that contain the same at... | Assigned | |
|
Task Description
When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.
|
|
1755 | QCAD (main) | Feature Request | Low | Selecting standard rotation angles by mouse click for M... | Assigned | |
1 |
Task Description
This would be nice. It will save a lot mouse - keypad changes for me.
|
|
1756 | QCAD (main) | Bug Report | Low | Polyline area wrong if polyline contains arc segments | Closed | |
|
Task Description
The area of polylines with arcs can be incorrect. With only line segments it is correct as far as I can check. See <Poly-line Area.dxf> ; <Poly-arc Area.dxf>
It does not depend on the quadrant their in nor with what point the start point is. It is related with the oriëntation. Flipping or mirroring horizontally induce the error.
Modifications like flip, move & copy may induce another error that locks the oriëntation. It is noticed that the oriëntation property in the editor does not change anymore when reversing. Although locked the value of the area property switches between good and wrong.
The master poly in question is a part of an arc and a part of an ellipse exploded 1024/full. These where recombined to one poly with ‘Create from selection’ and are closed. Closed as per the last vertex does not point to the start point, logically closed I presume. The purpose is to sum the error surface for the skewing math. For now I will use my common sence to distinguish what value is the correct one. Reversing while found faulty is the solution.
Version: 3.20.1.0 (3.20.1) Internet: QCAD.org Build Date: Apr 13 2018 Revision: dd51609 Qt Version: 5.5.1 Architecture: i386 Compiler: MSVC++ 10.0 (2010) Win7 32bit
Regards
|
|
1757 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: on polyline, followed by undo yield ... | Closed | |
|
Task Description
Breaking up self-intersecting Polys at segments crossing can’t be done for the second segment.
Divide: A new node is inserted and made start and end node. For the second segment no division occurs or can be made. Expected is that the segment the nearest to the selecting point is addressed. Eg. the trim command.
Breakout gap: - 1 Part fully trimmend of - Can be undone
Auto trim: (hint: do file-save first to revert) - 1 Part fully trimmend of - Undo will wipe the complete poly
In the file example 1.
Work-arround: - Divide - Insert node on the second segment not at the crossing - Divide at that node - Move new nodes to crossing
QCAD 3.20.1 Win7 32bit Kind Regards
|
|
1761 | QCAD (main) | Bug Report | Low | Info Polyline area does not find polylines (II) | Closed | |
|
Task Description
Selecting Info // Polyline area And hovering over a drawing with all kinds of entities. Does not find any polyline on the drawing hovering over them. Nor clicking on them.
Not a locked layer issue. All are visible.
|
|
1763 | QCAD (main) | Feature Request | Low | Simple Modify Move function | Closed | |
|
Task Description
Moving things require an extra click on ‘Delete original’ and a click on ‘OK’
A simple Modify Move functionality will reduce mouseclicks for moving by 2 for every move that is made.
Regards
|
|
1764 | QCAD (main) | Feature Request | Low | Zoom in with middle click | Closed | |
1 |
Task Description
I would suggest adding a feature Inkscape has, which is that a single middle click zooms in. This is not at the detriment of panning, since the mouse/pen (I use a Wacom tablet) doesn’t move. Right now middle click doesn’t do anything so I don’t think it should be a problem.
Another awesome and related Inkscape zooming feature is that Shift+middle click shifts to window zooming. But with the added bonus that you don’t lose the tool you’re in. Try it out on Inkscape if I’m not clear!
Cheers, JFL
|
|
1766 | QCAD (main) | Bug Report | Low | Edit > Application Preferences: Tool Settings: cannot a ... | Closed | |
|
Task Description
I wanted to add a couple of toolbars to the Tool matrix via the Tool Settings application preferences but all options are greyed out (see attached screenshot). I tried with a new config file and the result is the same. Is this the expected behaviour?
|
|
1768 | QCAD (main) | Bug Report | Low | Draw > Polyline > Create From Segments: segments delete ... | Closed | |
1 |
Task Description
‘Create From Segments’ ‘OG’ includes and admits selection of segments on locked layers.
A) -When selecting a segment on a not locked layer it can include segments on locked layers that connect to the string. (Assumed wrong) -A copy of the segments on the locked layer(s) are included in the polyline. (Assumed wrong) These segments are not removed from the locked layer(s) because of their locked nature. (Intended behaviour) eg. ‘OG’ & selecting the arc at point A in the example file. The arc is on a not locked layer.
B) -When selecting a segment on a locked layer it will fully remove segments that connect to the string on not locked layers. (Assumed very wrong) -Connecting segments on the locked layer(s) will not be converted to a polyline because of their locked nature. (Intended behaviour) eg. ‘OG’ & selecting the line at point B in the example file. The cyan lines are on a locked Layer.
Both A & B can be undone.
The example is a part of the ‘Skewing project’.
Regards CVH
|
|
1769 | QCAD (main) | Bug Report | Low | QCAD Help link to "FAQ's (Online) is broken | Closed | |
|
Task Description
QCAD 3.20.1.3 help link to “FAQ‘s (Online)” is broken and leads to a 404 page. (Menu → Help → FAQ‘s (Online))
|
|
1772 | QCAD (main) | Feature Request | Low | Go back on right-click on shaded Tool button | Assigned | |
|
Task Description
Right-click on the tools on the left-hand side of the screen brings you back in the hierarchy.
However, that does not work if you right-click while hovering above a button that that is shaded (inactive).
|
|
1775 | QCAD (main) | Bug Report | Low | Viewports: images sometimes not clipped at viewport edg ... | Closed | |
|
Task Description
See also: https://qcad.org/rsforum/viewtopic.php?f=89&t=5657
|
|
1776 | QCAD (main) | Bug Report | Low | Edit > Application Preferences: Tool Settings: cannot c ... | Closed | |
|
Task Description
Multikey shortcuts are broken in Qt. QCAD needs its own implementation of shortcut handling which also affects shortcut configuration.
|
|
1779 | QCAD (main) | Feature Request | Low | Layer list, block list, etc: add support for internatio ... | Closed | |
|
Task Description
The attached screenshot will make clear what the problem is: “échelle” should be between “cotes” and “platines”, not at the bottom. “e” and “é” must be considered the same letter when ordering alphabetically.
|
|
1780 | QCAD (main) | Bug Report | Low | QCad quits when you double-click a text | Closed | |
|
Task Description
QCad quits when you double-click a text; What’s wrong, QCad or file?
|
|
1782 | QCAD (main) | Bug Report | Low | Successive middle mouse button zoom in/out: delay betwe ... | Closed | |
|
Task Description
I very much like the new middle mouse button zoom in/out and congratulate Andrew for implementing it so quickly but there’s an annoying delay that is necessary between successive zoom in/out actions. This is easily understood by comparing it to zooming in/out with the +/- keys. With the keyboard you can repeat zooms as quickly as the keyboard repeat rate allows; with the middle mouse button quick zooms are not possible.
|
|
1783 | QCAD (main) | Bug Report | Low | RArc::splitAt(): fails in some cases | Closed | |
|
Task Description
RArc::splitAt() works wrong in some cases. To reproduce execute this script:
var arc = new RArc(new RVector(0, 0), 100, Math.PI*2, Math.PI/2, true);
var points = [];
points.push(arc.getPointAtPercent(1/3));
var arcs = arc.splitAt(points);
if (arcs.length == 2) {
qDebug("OK, arcs count:", arcs.length);
} else {
qDebug("FAILED, arcs count:", arcs.length);
}
arc.mirror(new RLine(0, 0, 0, 100));
points = [];
points.push(arc.getPointAtPercent(1/3));
arcs = arc.splitAt(points);
if (arcs.length == 2) {
qDebug("OK, arcs count:", arcs.length);
} else {
qDebug("FAILED, arcs count:", arcs.length);
}
The first case split in two arcs, but the second splits in one arc only.
I think the reason is the code in RArc::splitAt():
...
if (RMath::getAngleDifference180(a1, a2))*radius()<0.001) {
continue;
}
...
The RMath::getAngleDifference180() return angle between -pi and pi so absolute value should be used.
|
|
1784 | QCAD (main) | Bug Report | Low | View > Property Editor: Block attribute labels with int ... | Closed | |
|
Task Description
Bei der Eingabe von Blockattributen im Eigenschaften Editor werden die deutschen Sonderzeichen nicht richtig wiedergegeben.
When entering block attributes in the Properties Editor, the German special characters are not displayed correctly.
|
|
1785 | QCAD (main) | Bug Report | Low | Template / Viewport scale issue | Closed | |
|
Task Description
Given: Template with prepared Paper Space Frame/Titleblock scale = 1:1. Drawing 1:1 First Viewport / scale 1:1 / inserted in Paper Space = everything fine, Second Viewport / scale 0.02 will scale the Paper respective to the new Viewport scale but the Frame/Titleblock isn’t scaled.
|
|
1786 | QCAD (main) | Bug Report | Low | Block > Select Block References: not using active block ... | Closed | |
|
Task Description
... can’t find Block References if the Block which contains the Block References (Attributes) isn’t selected prior with the mouse.
The Selection Filter will find the Block References regardless which block is chosen in the Block List.
|
|
1787 | QCAD (main) | Bug Report | Low | View > Property Editor: Layer combo box not sorted | Closed | |
|
Task Description
Layer combo box in the property editor is not sorted.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5714
|
|
1789 | QCAD (main) | Suggestion | Low | Application Preferences / General / Performance :0 | Assigned | |
1 |
Task Description
Hi Andrew,
we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.
I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.
Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.
Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.
Just my two cents. ;)
|
|
1790 | QCAD (main) | Bug Report | Low | Info fuction returns right dimensions but drawing dimen ... | Closed | |
|
Task Description
no task description |
|
1791 | QCAD (main) | Bug Report | Low | Edit > Paste: relative zero point not set | Closed | |
|
Task Description
If I insert a content from the Clipboard to the drawing a new Relative Zero Point isn’t created. I’m not able to use e.g. a restriction regarding to the last inserted content. QCAD will use the last Relative Zero Point in the drawing even if I already inserted a content.
Screenshot: Clipboard content = circle
1. First insert
Restriction horizontal
2. Second insert
|
|
1792 | QCAD (main) | Bug Report | Low | Dimension > Angular: transformations broken | Closed | |
1 |
Task Description
(I originally described the problem in the forum: https://qcad.org/rsforum/viewtopic.php?f=33&t=5721 ) (The problem was also reproduced by user “Husky” so it not installation specific.)
I have a model where one of the details is as shown in attachment 1
However, when I create a viewport and display the part in the the layout the angular measurement is another. See attachment 2.
In the model it should be noted that the part displayed is a detail copied with a different scale as to Zoom in on a detail in order to put dimensions on it. It was created by copying a part of the model and pasting it back in the model but with 3x zoom.
I have also included the full .dxf file in the hope that it helps you both reproduce and fix this issue
Note: The same problem seems to also produce “ghostlines” in other viewports in the layout which is not present in the model. Removing the angular measurement also removed the ghostline. You can observe the issue by looking at layout2 and you can see a line (dimension layer) going from top right corner of the viewport towards the lower left. This line is not present in the model and appears to be some strange extension to the angular dimension the detail that is just to the top right in the model.
System: Macbook Pro 15”, OS X 10.13.6
(Can also be reproduced in Linux version)
QCad version:
Version: 3.21.2.0 (3.21.2) Build Date: Jul 9 2018 Revision: f9cea14 Qt Version: 5.10.0 Architecture: x86_64 Compiler: Clang 8.0.0
|
|
1793 | QCAD (main) | Bug Report | Low | Ruler functionality is compromised by Auto Grid setting | Closed | |
1 |
Task Description
Regarding to an observation by the forum member Horst1803 http://www.qcad.org/rsforum/viewtopic.php?f=92&t=5725
The ruler functionality is compromised by Graphics View / Grid settings. To show the full Ruler functionality “Automatic scale grid” has to be activated. I think that is not intended behavior.
Case: Appearance / Show rulers = activated
Application Preferences / Graphics View / Grid
on - Automatically scale grid on - Automatically scale meta grid off - Solid grid lines = Rulers visible = Graduation visible = Labels visible
off - Automatically scale grid on - Automatically scale meta grid off - Solid grid lines = Rulers visible = Graduation invisible = Labels invisible
|
|
1794 | QCAD (main) | Bug Report | Low | Detect Duplicates / Options / Refresh Icon missing | Closed | |
|
Task Description
Please see also http://www.qcad.org/rsforum/viewtopic.php?f=32&t=5745
|
|
1796 | QCAD (main) | Bug Report | Low | File > Open Recent: crash when file is in Google Drive ... | Closed | |
|
Task Description
When a file is opened from “File→Open Recent” on QCad Pro it gives a 100% repeatable crash if the file is on a folder synchronized with Google Drive. If the file is opened using “File→Open” instead it works as expected. See attached crash-log.
OSX specific. Does not happen on Linux with synchronized Google Drive folder
System: OSX 10.13.6
QCad version:
Version: 3.21.2.0 (3.21.2) Build Date: Jul 9 2018 Revision: f9cea14 Qt Version: 5.10.0 Architecture: x86_64 Compiler: Clang 8.0.0
|
|
1797 | QCAD (main) | Bug Report | Low | Keyboard shortcuts not saved between sessions | Closed | |
|
Task Description
In 3.21.1, and 3.21.2 a change to a shortcut looses all previous shortcut changes. This does not become apparent in the current session; a modified shortcut works fine together with all the previous modifications, until you close QCAD. But- When you re-open QCAD, the only customised shortcut available is the last one that was changed, every other customised keyboard shortcut has gone back to default.
Windows 10 64 , Gigabyte laptop i7 processor
|
|
1800 | QCAD (main) | Bug Report | Low | circle/arc intersection bug with line | Closed | |
|
Task Description
There is a case that qcad do not detect intersection between a circle/arc and a line. Attached is an example.
|
|
1801 | QCAD (main) | Performance Issue | Low | low perfomance in paper space and viewports | Assigned | |
|
Task Description
Improving the performance of the exceptional use of the processors when switching from the model to the paper space (testing with the attached file) the functionalities of the commands for the viewports are too low in the paper space.
|
|
1802 | QCAD (main) | Bug Report | Low | Startpoint indication disapears for some entities while ... | Closed | |
|
Task Description
Having a multi selection and at least one ‘older’ arc the startpoint indication in red of some entities might disappear.
Entities that suffer from this are: Other arcs Polyline Splines
Only the ‘oldest’ arc in selection will have a startpoit indication. Multi selection of ‘newer’ entities from the list above will not if an ‘older’ arc is part of the selection. Deselecting de ‘older’ arcs will reveal the startpoints up to the ‘oldest’ arc.
In the file provided entities where drew in order from left to right. Select all and start deseleting arcs from the left.
The behaviour is affected by changing the draw order property and a save/close/open. In the second file the rightmost arc was set to draw order 7, the same as the 4th was. After save/close/open it is renumbered to 8 and the behaviour is different as in the firts file.
Regards
|
|
1805 | QCAD (main) | Bug Report | Low | Modify > Split Entities: broken for logically closed po ... | Closed | |
|
Task Description
See http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5825&p=21761
|
|
1807 | QCAD (main) | Bug Report | Low | The ORDINAL 3906 not found in LIBEAY32.DLL | Closed | |
|
Task Description
Hello the message: The ORDINAL 3906 was not found in the LIBEAY32.dll dynamic-link library. is displayed each time QCAD is opened. How to fix this problem thanks in advance cordially**
|
|
1808 | QCAD (main) | Bug Report | Low | Property Editor: Changing width, height, orientation fo ... | Closed | |
|
Task Description
Property Editor / Size adjustment for Polygon rectangle accepts no changes for Width and Height. Was perfect working till 3.21.2
|
|
1809 | QCAD (main) | Bug Report | Low | Draw > Viewport > Add Viewport: layout dialog combobox ... | Closed | |
|
Task Description
Drawing with more than 4 Layout Blocks (Layout1, Layout2 etc),
Add Viewport, choose rectangle for viewport, Dialog pops up to choose a Layout Block, I choose Layout4 - the Viewport is placed on Layout2,
next new Viewport - placed on Layout3 - the Viewport will be placed again on Layout2 ...
|
|
1810 | QCAD (main) | Feature Request | Low | Change icons from black on white to white on black depe... | Assigned | |
1 |
Task Description
Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window. See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970
|
|
1811 | QCAD (main) | Feature Request | Low | Zoom 1:1 | Assigned | |
2 |
Task Description
It would be nice to be able to adjust the zoom factor so that the scale on the screen matches a ruler which I lay on the screen.
Thanks!
|
|
1819 | QCAD (main) | Feature Request | Low | Additional Options for "Paste along Entity" | Closed | |
|
Task Description
Please see:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22098#p22098
|
|
1825 | QCAD (main) | Bug Report | Low | File > Svg Export: text exported with wrong height | Closed | |
|
Task Description
If option “Preserve geometry” is activated, texts are exported at a wrong height if the drawing unit is not the same as the SVG output unit.
|
|
1826 | QCAD (main) | Feature Request | Low | guide lines when extending lines | Assigned | |
|
Task Description
When using the SHIFT key while dragging the end point a perpendicular guide line is displayed (see attached screenshot). It would be very helpful if other guide lines with x=const. and y= const. are displayed when pressing SHIFT + ALT key together while dragging.
|
|
1827 | QCAD (main) | Feature Request | Low | Property Editor: Accept advanced scale expressions for ... | Assigned | |
|
Task Description
Hi,
Identical scale expression used in Print Preview like 5:1, 5/1, 5”=1”, 5 are working flawless like expected. Same expression used in a Viewport scale leads to different outcomes.
The Property Editor used to fix that in Paper_Space does also not accept those standard expressions.
|
|
1828 | QCAD (main) | Bug Report | Low | Chinese language not loading correctly | Closed | |
|
Task Description
Most of the Chinese items cannot be shown correctly. But when I check the qm files, the translation are there and the contents are correct.
I’m using the Pro version 3.21.3.0
|
|
1829 | QCAD (main) | Bug Report | Low | Incorrect font weights in macOS 10.14 Mojave | Closed | |
|
Task Description
See QTBUG-69955 which affects QCAD on Mojave: https://bugreports.qt.io/browse/QTBUG-69955
|
|
1831 | QCAD (main) | Bug Report | Low | Block > Copy Block: attributes of block references are ... | Closed | |
1 |
Task Description
1) Open the attached dxf file 2) Right click on “vne_vent_odvod_ec_3f” block in Block list and select Copy block 3) Choose name 4) Insert reference of this Copy block to the modelspace 5) Save the file 6) Close and reopen the file
RESULT: Attributes of block references included in the original block are missing in the copied block. Immediately after insertion of the copied block I can see in the property editor, that block reference attributes are not “conected” to the block reference, but they are still visible. They disappear when the file is reopen.
Alternative way I use to copy this kind of blocks without error: Open block I want to copy, Select all entities, reference copy of them, paste to modelspace, select them in modelspace and choose create block.
|