QCAD Bugtracker

Having a multi selection and at least one ‘older’ arc the startpoint indication in red of some entities might disappear.

Entities that suffer from this are:
Other arcs
Polyline
Splines

Only the ‘oldest’ arc in selection will have a startpoit indication.
Multi selection of ‘newer’ entities from the list above will not if an ‘older’ arc is part of the selection.
Deselecting de ‘older’ arcs will reveal the startpoints up to the ‘oldest’ arc.

In the file provided entities where drew in order from left to right.
Select all and start deseleting arcs from the left.

The behaviour is affected by changing the draw order property and a save/close/open.
In the second file the rightmost arc was set to draw order 7, the same as the 4th was.
After save/close/open it is renumbered to 8 and the behaviour is different as in the firts file.

Regards

Ij window CAM Configuration output unit appears as inch instead of mm. All parameters are in option
when create a nc file,units are in inches not in mm. unsuable and not possible to change

1. Search the Tool Settings for “View” and you will only find “Overlays” without the submenu information.
2. Check View manually without a search will provide the submenu information.

See http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5825&p=21761

Switch “Overlay” Toolbar to visible below:
View/Toolbars and Widgets/Toolbars/View/Overlays, place the Toolbar in GUI, restart QCAD and the Toolbar is back to invisible.

Hello
the message: The ORDINAL 3906 was not found in the LIBEAY32.dll dynamic-link library. is displayed each time QCAD is opened.
How to fix this problem
thanks in advance
cordially**

Property Editor / Size adjustment for Polygon rectangle accepts no changes for Width and Height. Was perfect working till 3.21.2

Drawing with more than 4 Layout Blocks (Layout1, Layout2 etc),

Add Viewport, choose rectangle for viewport, Dialog pops up to choose a Layout Block,
I choose Layout4 - the Viewport is placed on Layout2,

next new Viewport - placed on Layout3 - the Viewport will be placed again on Layout2 ...

The coordiantes (in the lower left corner) freeze while mouse is moving. Updates as soon as the mouse is stopped.

This slows me down considerably. I have to stop, wait (too see the coordinates), move, stop, wait, move back, stop, wait, move, stop wait... This gotta be a bug?

MacOS 10.12.6

Trying the EleksMaker EL01 Laser router I noticed some bugs in creating pathways, rapids, tolerance and homing.

See the attached pdf

 FS#1813  Revisited. (Several bugs in QCAD/CAM 3.21.3. when generating G-code in “G-code Laser (offset).)

Hi Andrew,

After closing the bug notification I realised I didn’t add the DXF. My apologies for not attaching the DXF-file at hand.

Fortunately I am not the only one;

You can fix the missing G01 by replacing your file postprocessors/GCodeLaserOffsetMM.js with the attached updated file.

Since it was not attached, that makes two of us.

Anyway I have attached the DXF-file to be tested.

When using (adding a TAB on a radius fails).

Example:

When length of the TAB is set to 1 mm.

After export to *.nc code the code is not ok.

And then check this is NC viewer or gcode sender the length is not set to 1 mm but is smaller.

On a line this function (TAB) is correct working.

After regenerate selected toolpath OR regenerate all toolpath.

The result of the output is every time different.

When pushed for example 2 or 3 times this button.

See pictures

... describes basically the “Paste” tool and not the “Paste along Entity” tool.

Please see:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22098#p22098

Hi Andrew,

Kubuntu, QCAD/CAM 3.21.3

Font Standard. Selected as ‘single line’ font for engraving with mill or laser.

While CAM Exporting as G-code Laser (Offset) MM, or as Linux CNC, Exporting gets trapped in a loop.

In Font Standard the glyph’s ? & $ @ s S Q and 2 contains unwanted Z-movements. It seems these glyphs entities are not alligned properly; endpoint last line does not meet startpoint next line; why else the Z-movements?

Could this misallignment also traps Exporting?

Hi,

as I saw in the svg file and tried it, the ‘stroke-dasharray’ parameter needed (with values) to show the line same as in the editor.

Example:
...

      <!-- Line -->
      <path d="M207452.1773,1518891.8208 L203034.0991,1518891.8208 " style="stroke:#808000;stroke-dasharray:200,300;stroke-width:25;" qs:layer="layer"/>

...

Thanks,
Soma

Hi,

I logged in to my account, and checked my order. The link does not work anymore for the purchased item QCAD Pro.
Please help me ow can I download my Pro version QCAD.

Thanks,
Soma

If option “Preserve geometry” is activated, texts are exported at a wrong height if the drawing unit is not the same as the SVG output unit.

Most of the Chinese items cannot be shown correctly. But when I check the qm files, the translation are there and the contents are correct.

I’m using the Pro version 3.21.3.0

See QTBUG-69955 which affects QCAD on Mojave:
https://bugreports.qt.io/browse/QTBUG-69955

Hi Andrew,

I was fiddeling around with a copy of the hpgl postprocessor, and has it adapted, up and running for a HP7580 penplotter. You may add this to QCAD if you like.

Poking and peeking in the other postprocessor files, I found enough information to generate a very acceptable hpgl.plt file now, including the required pen changes.

The purpose of a ‘bracket-field’ (as [S] ) is clear to me. Where are [S#] and [S!] used for?

1) Open the attached dxf file
2) Right click on “vne_vent_odvod_ec_3f” block in Block list and select Copy block
3) Choose name
4) Insert reference of this Copy block to the modelspace
5) Save the file
6) Close and reopen the file

RESULT: Attributes of block references included in the original block are missing in the copied block.
Immediately after insertion of the copied block I can see in the property editor, that block reference attributes are not “conected” to the block reference, but they are still visible. They disappear when the file is reopen.

Alternative way I use to copy this kind of blocks without error: Open block I want to copy, Select all entities, reference copy of them, paste to modelspace, select them in modelspace and choose create block.

In a the modelspace I have a block reference of a block(parent), which includes block references (with attributes) of another blocks(child). Than I select this parent block reference and choose Explode. The result is, that the child block references have visible attributes, but they are not connected to the block reference anymore (I can not see them in property editor when the child block is selected). Than when I choose synchronize attributes, new attributes with default values will appear.
I am not sure it his is a bug or expected behavior of the Explode feature.

If it is not a bug, I would like to have new Extract feature, which would copy the content of the selected block reference and immediately insert it exactly to the same place (attributes would be still connected to child references) Extracted block reference would be than removed. Optionally, it could delete the block definition if it is not used anymore in the drawing (but there is already Block Purge feature which will do this).

- Create block with attributes
- Create block reference
- Select block reference
→ Property editor does not show attributes

Hi I am having an issue with the attached DWG file, when I try to open the file qcad opens then immediately crashes and I am unable to do anything.

Here is the event viewer log:

Faulting application name: qcad.exe, version: 3.21.3.0, time stamp: 0x5b9fbdd3
Faulting module name: MSVCR120.dll, version: 12.0.21005.1, time stamp: 0x524f83ff
Exception code: 0xc0000409
Fault offset: 0x0000000000074a30
Faulting process id: 0x1ad8
Faulting application start time: 0x01d48bbf05480557
Faulting application path: C:\Program Files\QCAD\qcad.exe
Faulting module path: C:\Program Files\QCAD\MSVCR120.dll
Report Id: fa661b18-d0df-41a8-88e9-37c2ea345bcb
Faulting package full name:
Faulting package-relative application ID:

Hi Andrew,

I am trying to ‘HP pen plotter’ a test file, created by AutoCAD 10.

Saving the in QCAD loaded file goes fine. However, the tool table is empty now.

Trying to make a new tool 1 Errors it exists already but does not show up in the tool table.

What do I miss?

Ich habe im Snapshot 3.21.3.14 unter macOS einen Fehler gefunden, der QCAD in eine Endlosschleife führt, sodaß QCAD nicht mehr antwortet.
Details siehe unter https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6011#p22435

Hi,

when I export a dxf draw to svg the text objects shows in a bit different place.

QCAD version is 3.21.3.14

Drawing preferences have no effect on point type when printed or in print-preview for block reference points.
Notice in “print output”, the “Dot” (Block reference point) is displayed (drawing preferences are ignored).

See attached photos.

Hi Andrew,

I have added a PWM Laser post processor.

You can add it to QCAD’s post processor directory

Application crashes when entering 0 in the scale option while pasting a spline.

This is an issue also when entering scale factors of less than 1, as the application immediately crashes when entering the 0 digit.
As a workaround for a scale factor of e.g. 0.5, one can enter 1.5 and then edit the 1 digit to 0.

Hi Andrew,

While generating a toolpath I stumbled upon an odd error.