|
1312 | QCAD (main) | Feature Request | Low | Make dimension label decimal separator configurable | Assigned | |
1 |
Task Description
Make dimension label decimal separator configurable (DIMDSEP).
|
|
1345 | QCAD (main) | Feature Request | Low | Added option to paste a number of entities with even/eq... | Assigned | |
1 |
Task Description
Please see topic: http://www.qcad.org/rsforum/viewtopic.php?f=31&p=14209&sid=162973e4a12f58c8116299b62673a520#p14209
An additional option would be useful to paste any given entity a set number of times with even/equal gaps in between.
|
|
1362 | QCAD (main) | Feature Request | Low | new layer tool: Toggle visibility all | Assigned | |
1 |
Task Description
Hi,
I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go. Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.
The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.
And I’m confident - there are many more useful scenarios for a tool like this one ...
pics: “Toggle visibility all” with one click:
|
|
1407 | QCAD (main) | Feature Request | Low | Splines: add support for knot weights, start-, end tang... | Assigned | |
1 |
Task Description
Attached DWG/DXF files are incorrectly read by QCAD. They contain splines drawn using ZWCAD and saved as DWG/DXF version 2000. Above splines are polylines created with autolisp routine which converts spline to polyline, so you can see how splines should actually be drawn.
First spline is created with fit points: 2,2 4,4 6,2 Then copied and applied weight of 2 on central control point. Then copied again and applied weight of 0.5 on central control point.
Second spline is created with fit points: 6,2 8,4 10,2 with vertical start and end tangent. Then copied and applied fit tolerance of 1 for fit points.
Third spline is created with fit points: 10,2 12,4 14,2 with horizontal start and end tangent.
Fourth and fifth spline are correctly drawn by QCAD.
Link to bitmap (converted to png) export: External Link
Versions QCAD version: 3.13.1.0 Date: Mar 17 2016 Qt version: 4.8.4 Compiler version: gcc 4.4.3 Build Date: Mar 17 2016 Revision: Architecture: x86_64 OS: Linux OS version: Unknown
|
|
1425 | QCAD (main) | Feature Request | Low | Automatically create hatch entities behind border entit... | Assigned | |
1 |
Task Description
Automatically set the draw order one lower than the lowest draw order of a border entity when creating a hatch. This should be a user preference, since not everyone might want that behavior.
|
|
1430 | QCAD (main) | Feature Request | Low | Modify > Round: one-click fillet | Assigned | |
1 |
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4256
|
|
1440 | QCAD (main) | Feature Request | Low | New Drawing in Simple API | Assigned | |
1 |
Task Description
Could it be possible to add a simple function to add a new empty drawing (like File > New) to Simple.js ? Thank you. (PS, this simple.js API is awesome, btw :D)
( I already have my own to simplify my scripts, but it does not seem to work correctly if I set action.setRequiresDocument(false); in the init functions See more at http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4203#p15203 )
|
|
1452 | QCAD (main) | Feature Request | Low | Colour opacity option | Assigned | |
1 |
Task Description
Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?
related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715
|
|
1462 | QCAD (main) | Bug Report | Low | Mac Trackpad zoom gesture not working as expected | Assigned | |
1 |
Task Description
Hi,
I am using mac version and I have annoying issue with trackpad. I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows. Mouse wheel / two finger swipe: Scroll (Trackpad... Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around) Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page) Reverse mouse wheel direction for zoom :unticked Mouse wheel zoom factor: 1.02
Things work as expected:
Issue I am experiencing:
Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler. The mouse point remains where it is.
Workaround: Reset viewpoint with autozoom and navigate around.
Expected zoom behaviour: I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.
|
|
1464 | QCAD (main) | Feature Request | Low | Option button to access finer grid to snap | Assigned | |
1 |
Task Description
Hi,
I use eagle cad for pcb designs and I like its ability to snap to finer snap to grid when pressing option button (ALT in windows). I am fine with auto grid setting, however, it would be good to also have a way to access finer grid when pressing down option button.
For example, when zoomed out, grid is 100mm apart. When pressing down on the option button (ALT in windows), grid switches to finer 10mm. This will save me time, zooming in to access finer grid to snap to.
|
|
1469 | QCAD (main) | Suggestion | Low | Cartouche automatique | Assigned | |
1 |
Task Description
Would not it be possible to create a kind of template for printing? We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).
Original suggestion:
Bonjour,
Ne serait il pas possible de créer une sorte de template lors de l’impression ? On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).
|
|
1472 | QCAD (main) | Feature Request | Low | Arc fit tool to improve large files | Assigned | |
1 |
Task Description
Large files/large entities perform bad in QCad. There are many dxf files that are created with thousand of lines that perform reasonable in other cad’s/cam’s that qcad cannot match.
One very useful tool, that could be added would help to improve qcad performance and at the same time enlarge the dxf quality (by replacing thousand of files by arcs), would be a tool called “arc fit” where, when possible and under a determined possible error margin (user selectable) creates arcs replacing the existing lines. This would improve the file work in QCad also improves CAM software that would work after QCad, that I think is important for many users.
For example, if it is needed to use qcad to generate toolpaths for letters, after exploding letters, the output is almost impossible to work due to the number of lines that are created. Having arcs instead of lines would greatly improve qcad use.
|
|
1503 | QCAD (main) | Feature Request | Low | Detect duplicates within a given selection -new tool re... | Assigned | |
1 |
Task Description
It would be so useful to have an option to be able to detect duplicates within a given selection.
|
|
1526 | QCAD (main) | Suggestion | Low | Exporting block attributes to CSV | Assigned | |
1 |
Task Description
Two useful commands make it necessary to
1-”delete all the history of the command lines without terminating QCad” ; and
2-”export attributes to the CSV file as exported to the Blocks List”
|
|
1541 | QCAD (main) | Feature Request | Low | View > Zoom > Zoom In/Out: Make zoom factor configurabl... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729
|
|
1555 | QCAD (main) | Feature Request | Low | Export list of points. | Assigned | |
1 |
Task Description
Hello It would be great when you can add a function to export a selected object as a list of points. Is it possible to add?
Autodes DWG TrueView 2017 has this function and it is very useful. Here you can see a screenshot of this function.
|
|
1577 | QCAD (main) | Feature Request | Low | Postfix for DIM / Remember last DIM Label ... | Assigned | |
1 |
Task Description
Hi,
unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.
May I ask for an additional Postfix option or/and a remember functionality of those fields?
|
|
1613 | QCAD (main) | Feature Request | Low | Add Orthogonal Option to Angelur DIM Tool ... | Assigned | |
1 |
Task Description
... please see below:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956
|
|
1673 | QCAD (main) | Feature Request | Low | Layouts and Viewports: support polygonal viewports | Assigned | |
1 |
Task Description
Add support for polygonal viewports
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241
|
|
1702 | QCAD (main) | Feature Request | Low | Draw > Polyline: add boolean operations | Assigned | |
1 |
Task Description
Add intersection, union, difference, XOR operations for closed polylines.
|
|
1705 | QCAD (main) | Feature Request | Low | Connect certain actions and layers | Assigned | |
1 |
Task Description
When dimensioning my drawings I always want the dimensions to be on the dimensions layer. When adding text I want the text to be on the text layer. When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer. When drawing a line segment it almost always is on my outline layer.
So I propose a new option to bind certain actions to certain layers. Whenever those actions are selected the layer should automatically be switched.
I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.
|
|
1713 | QCAD (main) | Feature Request | Low | Add attribute value "By Parent" for child layers | Assigned | |
1 |
Task Description
Add attribute value “By Parent” for color, line weight, line style for child layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407
|
|
1714 | QCAD (main) | Feature Request | Low | Dimension > Diametric: improve display when label is mo... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408
|
|
1755 | QCAD (main) | Feature Request | Low | Selecting standard rotation angles by mouse click for M... | Assigned | |
1 |
Task Description
This would be nice. It will save a lot mouse - keypad changes for me.
|
|
1789 | QCAD (main) | Suggestion | Low | Application Preferences / General / Performance :0 | Assigned | |
1 |
Task Description
Hi Andrew,
we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.
I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.
Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.
Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.
Just my two cents. ;)
|
|
1810 | QCAD (main) | Feature Request | Low | Change icons from black on white to white on black depe... | Assigned | |
1 |
Task Description
Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window. See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970
|
|
1833 | QCAD (main) | Feature Request | Low | Deep synchronize attributes feature | Assigned | |
1 |
Task Description
There is the Synchronize attributes feature which works well. But It affects only block references in the active layout(modelspace, block layout). If I want to synchronize attributes of block references in in another blocks, i have to manually go through all blocks and run synchronize attributes feature. That is the reason I would like to modify Synchronize attributes feature to affect all block references in a drawing, or add new Deep synchronize attributes feature.
|
|
1837 | QCAD (main) | Feature Request | Low | Line bisector tool | Assigned | |
1 |
Task Description
Hi,
we have already this nice tool “Angle bisector”.
I would really appreciate if we could get the same function for parallel lines to place a line exactly in the center of both lines.
Thanks.
|
|
1878 | QCAD (main) | Feature Request | Low | Snap > Distances from 2 Points: snap to point with give... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211
|
|
1888 | dwg2bmp | Feature Request | Low | Add support to disable hatch rendering on "dwg2bmp" | Assigned | |
1 |
Task Description
Hi!
A friendly request to add an option to disable hatch rendering on “dwg2bmp” conversions.
Depending on the nature of the conversion and the density of the hatch, this may render unintelligible images (see attachments). The option could look like “-t, -nohatch” to indicate hatches should be hidden before rendering. This could potentially become an option too for “dwg2svg” or “dwg2pdf.”
Amazing product, thank you so much!
|
|
1903 | QCAD (main) | Feature Request | Low | Saving layer settings, e.g. visibility status, associat... | Assigned | |
1 |
Task Description
In a medium complex drawing it may be too much details to have all layers in a drawing visible at once.
Instead a number of views would be created that saves not only zoom level and position but also what layers are visible and not (as appropriate for the purpose of that particular view). This is very cumbersome (to the extent it is not really realistic) to achieve today and requires a lot of duplication of both model and layers.
The advantage of adding this is the ability to have only one model (with multiple views) and avoid duplication of work and the risk of inconsistency inherent with many copies of the model.
As a further (and natural extension to this) would be the ability to used this functionality with view-ports to be able to create (possibly many) paper-spaces from a single model. This would however require view-ports to be aware of what view they are a window into. A single change in the model would then propagate to all defined view-ports and paper-spaces.
|
|
1926 | QCAD (main) | Feature Request | Low | No negative coordinate values ? (DO command) | Assigned | |
1 |
Task Description
Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !
Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command. There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !
GW.G
|
|
1928 | QCAD (main) | Feature Request | Low | Optionnally 'Auto clean up' after generation of NaN / N... | Assigned | |
1 |
Task Description
Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props. Some explicitly don’t and test their actions with isNull().
As these serve a purpose in some processes, trails of them can be part of the results. For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line. In a few cases its a desirable feature eg. controlpoint spline. (Allthough there are no Null props involved with equal successively controlpoints)
Many problem post on the forum are related to Null - Zero and so on.
In some cases it can’t be undone by re-editing the drawing. https://qcad.org/bugtracker/index.php?do=details&task_id=1925
If it can’t be undone by Undo/Redo it is a bug. https://qcad.org/bugtracker/index.php?do=details&task_id=1757
In some cases there is a difference noticed after file save-close-open.
|
|
1940 | QCAD/CAM | Feature Request | Low | CAM > CAM Configuration: Add program description | Assigned | |
1 |
Task Description
Add a program description to the CAM configuration dialog and export to postprocessors as variable.
See also: https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649
|
|
1976 | QCAD (main) | Feature Request | Low | Envelope at offset to a poly tool | Assigned | |
1 |
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?t=6650
|
|
1977 | QCAD (main) | Feature Request | Low | Corresponding coordinate format | Assigned | |
1 |
Task Description
Hi,
It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.
This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.
Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).
|
|
2016 | QCAD (main) | Bug Report | Low | Offsetting multi selection of polylines halts premature | Assigned | |
1 |
Task Description
See: https://qcad.org/rsforum/viewtopic.php?&t=6827&p=25992#p25992
Offsetting 32 polys from ellipses fails. Offsetting 16 polys can be completed with 2 selections for outer and 2 for inner.
For some reason the offset function halts premature.
Regards, CVH
|
|
2060 | QCAD (main) | Feature Request | Low | Dialog box for Layer Status | Assigned | |
1 |
Task Description
So far, layer status has only been implemented very rudimentarily. I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.
|
|
2087 | QCAD (main) | Feature Request | Low | More options for "Paste along Entity" [PE] | Assigned | |
1 |
Task Description
“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.
Would be a nice time saver to have the same options for “Paste along Entity” too.
|
|
2140 | QCAD (main) | Suggestion | Low | Changing navigation mode for mouse wheel doesn't change... | Assigned | |
1 |
Task Description
Looks like error, but may be that’s feature request.
CAD software uses typical navigation behavior as: Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.
Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior: Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.
Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.
QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel. Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!
Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.
|
|
2145 | QCAD (main) | Bug Report | Low | Modify > Trim Both: closed polyline as either entity br... | Assigned | |
1 |
Task Description
QCAD Professional
Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Use TM by mistake to trim a line to a closed shape. Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7780 File included in the topic. Y1 Original Y2 Faulty use of TM Y3 After ‘Undo’
Husky only ‘could agree on a not proper working undo’ The conditional clause of this sentence is ‘the odd choice’. Blaming this on incompetence. Insight is the best way to get better ... ... but the rest is more an odd choice of tools for this kind of task ...
Again, the MISTAKE was by accident, not intended, in a flick of the wrist ... I didn’t change the trimming method, I simply forgot to ... only once.
The ‘undo’ of my incompetent MISTAKE didn’t returned to how the situation was before I erroneous trimmed with TM. I was simply undoing my erroneous action.
Documented it in 4 quadrants. For this, 4 times on purpose, and not as a consistent ‘odd choice’.
Regards, CVH
|
|
2157 | QCAD (main) | Bug Report | Low | Controlpoint Spline exploded to polyline may induce NaN... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Documented in 3.25.2.4, reproducible under 3.25.2.7 In the attached file: → Explode the trial cases and locate NaN Widths. → These faulty widths are cleared while saving and reverting. = work around.
Related Post: https://www.qcad.org/rsforum/viewtopic.php?t=7902#p30902 Related Topic: https://www.qcad.org/rsforum/viewtopic.php?t=7901 Related Commit: https://github.com/qcad/qcad/commit/fcd7929bced7ae328029c1aa2ee2aff2745709c6
Arctic_Eddie reports failing CAM offset at exactly these points !!! Reported is a faulty arc with radius of over 360,000mm. - I can not reproduce this under QCAD working further on the Polys with NaNs. - However the direct offset of such controlpoint Splines is erroneous. (see file in post 30902)
Arctic_Eddie reports arc radii of over 10,000mm. - These don’t seem to be faulty. - I agree that BiArc fitting should be bound to a lower and certainly to an upper limit. - That should be huge otherwise faint curvature is represented by many wobbles or too quick by straight lines. (All this, keeping in mind that QCAD doesn’t return the optimum fitted BiArc, see: https://www.qcad.org/rsforum/viewtopic.php?t=4859)
Regards, CVH
|
|
2159 | QCAD (main) | Bug Report | Low | Draw > Polyline > Polyline from Selection: may induce N... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32 Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Discovered in 3.25.2.4, reproducible under 3.25.2.7
Draw any open or closed chain of line entities. Select All. OC to Polyline. Step through vertices.
No example file provided because these NaN values are not saved to a file. More pronounced with lines as with arcs. Less pronounced when recombining after an explosion. Some methods clear these to value = void. Some methods clear these to zero (OR). Can also occur when adding segments to an existing polyline with OC.
Regards, CVH
|
|
2160 | QCAD (main) | Bug Report | Low | Draw > Polyline > Relocate Start Point: fails on polyli... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Origin: I like to start my CAM paths at low curvature instead starting at high curvature. Ellipses may explode with the startpoint at the tip. (file Y2)
Documented in 3.25.2.4, reproducible under 3.25.2.7
File included with 4 LayerStates - Original Ellipses: Y1 - Exploded to polylines (32 segments): Y2 - Direct after XP, OR performs different on the left top one: Y3 - Faulty solutions by OR: Y4 (= saved state)
The results may differ with the saved explosions.
With the file. Y1 TA XP Relocate startpoint with OR to an existing reference (called ‘End’)
Regards, CVH
|
|
2161 | QCAD (main) | Feature Request | Low | Make Polyline from Selection (OC) configurable for simp... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Not related to OS, nor version.
The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar. The method Polyline from Selection (OG) has no UI or none showing.
OG retrieves a tolerance from QCAD.ini, what is initially not set:
var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);
The tolerance will be default = 0.001 similar as the default in AppPrefs. The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.
OG calls PolylineFromSelection.autoJoinSegments with this tolerance:
var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);
PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape with simplification hard coded to true. (last parameter)
// create polyline from line, arc, spline or open polyline entity:
var polyline = PolylineFromSegments.createPolylineShape(
entity, doc, vTolerance, op, undefined,
traversed, callBacks, undefined, true);
I would like to see the simplification optional and default = true.
Regards, CVH
|
|
2162 | QCAD (main) | Suggestion | Low | Update the parameter with simplify of RPolylineData & R... | Assigned | |
1 |
Task Description
Unrelated to OS, nor version
Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372
Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated. The Classes still refer to an ‘angleTolerance’.
Regards, CVH
|
|
2167 | QCAD/CAM | Bug Report | Low | Comma format decimal separator fails ZSafety CAM config... | Assigned | |
1 |
Task Description
QCAD/CAM Trial package Win installer 32 bit Version: 3.25.2.0 (3.25.2) Internet: QCAD.org Build Date: Sep 4 2020 Revision: 4a61501 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Local decimal separator is ‘,’ (comma) In CAM configuration .. Z Levels .. Safety level
Using nn,nnn the output is Nxx G0 Znn Using nn.nnn the output is Nxx G0 Znn.nnn
Drop down boxes are all in dot format. Didn’t try anything else yet
Regards, CVH
|
|
2174 | QCAD (main) | Bug Report | Low | [SOLVED] Numerous shortcomings when exploding Polylines... | Assigned | |
1 |
Task Description
QCAD Professional Windows 7, Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Issues most likely unrelated to OS and installations before 3.25. Related post: https://qcad.org/rsforum/viewtopic.php?&t=7982
Flaws documented in full in attached dxf. The dxf has meaningful Layer States.
4 Columns: - Prior Art - The test cases - Actual results - Results with proposed fix
Tried as many things as I can come up with. Orange: Flaws Red: Errors Green: Good results (or as good as I can get them)
Solution(s) given in attached script explode.js (I am just a simple guy and wouldn’t know how to file a pull request on GitHub ......)
In section: “explode polyline into line and arc segments” group: “if (RPolyline.hasProxy() && polyline.hasWidths()) {....}” All additions, updates & typos are marked with “CVH”, one can textual search for it. Over-documented for sure. Any Eaction is to debug in Windows and is obsolete.
Included PreferencesPage.ui is updated for the all Splines from Text fix Still in consideration: Forcing cubic splines from text to degree 2 ... ... I am rather convinced ...
CVH
|
|
2177 | Documentation | Suggestion | Low | Update class_r_polyline.html | Assigned | |
1 |
Task Description
Include RPolyline.getLeftRightOutline() method in class_r_polyline.html
In use since 11 Sept 2020
CVH
|
|
2178 | QCAD (main) | Bug Report | Low | Stored Color of text dimension changes | Assigned | |
1 |
Task Description
QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit Related Topic: https://www.qcad.org/rsforum/viewtopic.php?&t=7954
Reported is that black is saved as #00004c (dark blue) Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)
My system/installation saves black as #4c000 (dark red)
When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff. The threshold for that are #00, #65, #8b, #b2 & #e5 See: DimColorScale (png & dxf)
8 standard CAD colors fail saving correct Black (something with #4c) Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow (#80 turns #7f) & Gray (#adadad instead of #a0a0a4)
As with Gray, when mixing the 3 colors it gets rather fuzzy ... #505050 & #555555 both turn #5b5b5b & #464646 turns #4c4226
A snippet of my investigation is included in the topic (45 files in a ZIP)
CVH
|