|
752 | QCAD (main) | Feature Request | Very Low | Add support for the 3dConnexion Space Navigator (Pan an... | Assigned | |
4 |
Task Description
The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.
3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand
While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.
|
|
2544 | QCAD (main) | Feature Request | Very Low | Request to add "plain text" paste, traditionally CTRL-S... | Assigned | |
2 |
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10379
Could you add “plain text paste” as ctrl-shift-V Why? Because sometimes the clipboard comes in with rich text formatting that’s anti-helpful. The workaround is to paste into a plain text editor, or the console, then recopy and repaste into qCad.
Either way the ctrl-shift-V shortcut is useful for those trained on other software but: one could also argue that qCad should NEVER take rich text, and rather only accept the plain text with both CTRL-V and CTRL-SHIFT-V.
— CHV says
Agreed, having encountered it numerous times while documenting with text snippets from elsewhere. :roll: Even copying Info measurements from the Command Line are Rich Text.
The best place to file a feature request is QCAD Bugtracker: https://www.ribbonsoft.com/bugtracker/ You may need a different account there or make a new one.
May I remark that Ctrl-Shift-V is already in use for Paste along Entity (PE) But not when the Text Editor Widget has the focus and dialog Widgets are always modal on a Win OS system. :wink: Still, I’ll vote for it in any way.:P
Regards, CVH
|
|
991 | QCAD (main) | Feature Request | Very Low | Add warning when overwriting custom property | Assigned | |
1 |
Task Description
Property Editor - Geometry - Custom - Add Custom Property
If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.
|
|
1626 | QCAD (main) | Feature Request | Very Low | 'Clip to Circle' tool | Assigned | |
1 |
Task Description
Hi Andrew,
Would it be possible to have a clip to circle tool also please?
Regards
Clive
|
|
2107 | QCAD (main) | Feature Request | Very Low | Add a button to the tool bar to allow for a quick backg... | Assigned | |
1 |
Task Description
I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.
|
|
2452 | QCAD (main) | Feature Request | Very Low | Keyboard Shortcut for Undo Last Point While Drawing Spl... | Assigned | |
1 |
Task Description
Instead of having to click on the toolbar, it would be useful to have a keyboard shortcut for undoing the last fit point (or control point) while drawing splines. Preferably it would also be nice to allow the user the ability to set what the keyboard shortcut is for this function.
|
|
2501 | QCAD (main) | Feature Request | Very Low | Add spelling checker / spell checker for all text boxes | Assigned | |
1 |
Task Description
Suggestion to add spelling checker / spell checker for all text boxes
|
|
2505 | QCAD (main) | Feature Request | Very Low | Info > Polygonal Area > Use dimension decimal format fo... | Assigned | |
1 |
Task Description
Andrew, On behalf of user Kmeelo
Polygonal Area adds measurements text with 12 decimal digits and then as short as possible.
Current formatting path see: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10450&p=42833#p42805
Related forum feature request: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10458
I also see a misconception of the term ‘precision’. Numbers precision is the amount of significant digits disregarding the position of the decimal point. 12 decimal digits is about the largest precision for numbers with 5 integer digits.
Regards, CVH
|
|
1649 | QCAD (main) | Feature Request | Very Low | Add configuarable format options for saving blocks to l... | Assigned | |
|
Task Description
Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.
|
|
1788 | QCAD (main) | Feature Request | Very Low | New snap: reference points of a block references | Assigned | |
|
Task Description
I know this was reported and fixed before ...
https://www.qcad.org/bugtracker/index.php?do=details&task_id=843
... but it looks like we have the issue now back with some kind of variation.
If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.
If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.
Edit: New Test drawing:
|
|
1920 | QCAD (main) | Feature Request | Very Low | Edit > Application Preferences: Add preference to disab... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447
|
|
1922 | dwg2bmp | Feature Request | Very Low | Add error message when requesting raster for a non-exis... | Assigned | |
|
Task Description
It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D
See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453
|
|
2226 | QCAD (main) | Feature Request | Very Low | macOS: support proxy icon | Assigned | |
|
Task Description
Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.
|
|
2287 | QCAD (main) | Feature Request | Very Low | Evaluate draw order for preference "Prevent white-on-wh... | Assigned | |
|
Task Description
The Application Preference setting “Graphics View - Appearance - Prevent white-on-white/black-on-black display” seems to be a global setting that doesn’t take the draw order into account. For example: With the setting enabled, it prevents creating a white hatch of a higher draw order on top of a larger, colored hatch with lower draw order (background). The preference does not seem to evaluate if the object is truly drawn as “white-on-white”.
With the preference enabled, setting the object color as “white” will set the “white” color label, but the object color actually stays black. Its hard to determine why it happens in that case.
Is it possible to let the global preference setting be applied to objects after evaluation of the draw order, and determine if the object actually is a true case of white-on-white?
My workaround: Disable the preference setting (I think it is default = on), and only enable it for ad-hoc checks of hidden and overlooked objects.
|
|
694 | QCAD (main) | Feature Request | Low | User coordinate systems (UCS) | Assigned | |
13 |
Task Description
UCS support.
|
|
763 | QCAD (main) | Feature Request | Low | Hatching with just one click | Assigned | |
10 |
Task Description
My task: To hatch an area.
Right now, if I want to fill an area with a hatch pattern, I have to select all the enclosing objects (lines, arcs) and then I can select the hatch tool. That can be under some circumstances a tedious task. To illustrate this, I created a simple example (see Attachment 1: Hatching.png).
Step 1: Create a rectangle. Step 2: Draw four vertical lines. Step 3: Select the four lines surrounding the first area. –> Problem! The horizontal lines are too long. Step 4: Divide the long horizontal lines of the rectangle where the vertical lines touch. Now the lines surrounding the three areas can be selected. Step 5: Hatch the selection. Done.
Just for fun try recreating my second example (see Attachment 2: Hatching2.png)
Therefore I would like to suggest a far more simple approach.
Step 1: Select the Hatch Tool. Step 2: Click inside the area you would like to be hatched. Done.
Of course that would mean that the hatch style is already pre-defined and can be changed later, if needed.
In this way productivity can be increased by ... [fill in you own estimate] ... times.
Example 2 would need only 13 clicks to hatch all the areas (including the hatch tool button).
|
|
228 | QCAD (main) | Feature Request | Low | Insert current date (and other fields) | Assigned | |
9 |
Task Description
Insert field into drawing that displays current date, file name, ...
|
|
1224 | QCAD (main) | Feature Request | Low | Revision clouds | Likely to be implemented | |
9 |
Task Description
Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.
|
|
1488 | QCAD (main) | Feature Request | Low | Dimension text position | Assigned | |
7 |
Task Description
This one is a really important one for me, as currently I am doing a lot of dimension and annotation drawings. I would like to request an option to be added to the dimension settings for both drawing and application settings to be able to choose whether the dimension text is to the right or left side or over the top or underneath the dimension line. This would help tremendously when a lot of dimensions are needed!
Regards
Clive
|
|
972 | QCAD (main) | Feature Request | Low | Distribute equally option ... | Assigned | |
6 |
Task Description
It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.
|
|
2018 | QCAD (main) | Feature Request | Low | Layer visibility setting per view/view-port | Assigned | |
6 |
Task Description
In a medium complex drawing it’s often too much details to have all layers in a drawing visible at once. Also, it is of great importance to be able to have a single model to avoid duplication of work and risk inconsistency.
So i would like to create a number of views where each view has selected layers visible (that makes sense for the purpose of the view) and then assign the views to different layout blocks (using view-ports) in paper-space to be able to setup printing of several views on the same page/PDF
This also means that view-ports would have to be aware of what view they are displaying (if any besides the standard-view). This will then make it possible for printouts of different views with selected layers visible (different for each view and view-port) and still have only one model. Today this is not possible.
As it is today the only limited workaround is to set the layers you want to display, print/PDF of that viewport on separate page, and then change it for the next page, and so on. The big drawback is that you cannot have two different views/view-ports on the same page with different layers visible. Also, for large drawing it is painful to have to do a lot of manual setup for each rendering of the complete drawing.
|
|
1428 | QCAD (main) | Feature Request | Low | Snap middle of the minimum distance between two entity'... | Assigned | |
5 |
Task Description
Hi,
from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.
Pic 1: Given situation Pic 2: Result after using this new snap tool
Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?
|
|
1721 | QCAD (main) | Feature Request | Low | Insert table tool | Assigned | |
5 |
Task Description
Hi Andrew,
I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)
Many thanks
Clive
|
|
2353 | QCAD (main) | Feature Request | Low | add theme folder to a local shared path | Assigned | |
5 |
Task Description
Would it be possible to add Qcad’s theme folder to the local shared path, for example this would be /home/username/.local/share/QCAD/QCAD/themes for Linux. I know this works well for line types and would be extremely helpful for themes.
|
|
741 | QCAD (main) | Feature Request | Low | An additional Radius Measurement tool ... | Assigned | |
4 |
Task Description
It would be nice to have an additional Radius Measurement tool with short leads. The current Radius tool shows always the lead line to the center of the radius what is in many cases not useful.
I’m not asking for a workaround
|
|
895 | QCAD (main) | Feature Request | Low | Area calculation based on existing entities | Assigned | |
4 |
Task Description
Use case:
Start tool
Choose one entity of the contour
If contour is closed, area of closed contour is calculated an printed in the command line history
Configuration parameters: segment length for arc interpolation
|
|
1099 | QCAD (main) | Feature Request | Low | Add Leader with text and number bubble | Assigned | |
4 |
Task Description
Having leader with numbers and text would be awesome to better interact with the drawing and making BOM lists.
Currently it takes too mush time to make the leaders with text and number bubbles.
|
|
1112 | QCAD (main) | Feature Request | Low | Gradients | Assigned | |
4 |
Task Description
I would very much like to ask for the option to Hatch/Fill with a gradient of one or two colours.
Many Thanks
Clive
|
|
1165 | QCAD (main) | Feature Request | Low | New Create Spiral Tool | Assigned | |
4 |
Task Description
A new tool to create Spirals would be great to have, with an option to restrict the decline to achieve to draw either Logarithmic or Linear styles.
Please see related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3236
|
|
1723 | QCAD (main) | Feature Request | Low | Detecting overlapping line / arc segments | Assigned | |
4 |
Task Description
Add a tool to detect overlapping segments or lines and arcs. Similar like the “overkill” command in other CAD systems.
|
|
1983 | QCAD (main) | Feature Request | Low | Trim All or Bulk Break out | Assigned | |
4 |
Task Description
This is a trim method I am missing in Qcad.
20 years ago it existed in CadKey. You had a bunch of lines or segments. You defined a (new) line or segment as cutter. ‘Trim All’. You pointed at the side of the cutter entity to trim all intersecting at that side.
Pritty the same as in this topic: https://qcad.org/rsforum/viewtopic.php?t=5221
Only in rare cases I can use Husky’s workaround as pro. It all depends on what else is in the clipping rectangle that is needed to trim all intended. If of no use all single crossing entities have to be chosen one by one.
Regards, CVH
|
|
2070 | QCAD (main) | Feature Request | Low | cropping image | Assigned | |
4 |
Task Description
It may be useful to insert the “image cropping” function both in top / bottom - right / left mode, and with polyline
|
|
275 | QCAD (main) | Feature Request | Low | Rounding all corners of a polyline | Assigned | |
3 |
Task Description
Modify - Round - Click polyline - round all corners
|
|
734 | QCAD (main) | Feature Request | Low | Possibility to distribute a selection equal to each oth... | Assigned | |
3 |
Task Description
It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...
Screenshot: First row: Befor / Second row: after
|
|
758 | QCAD (main) | Feature Request | Low | Lengthen/Shorten tool - add additional option | Assigned | |
3 |
Task Description
When using the Lengthen/Shorten tool it would be good to have an additional option to be able to pick a point to lengthen or shorten to.
|
|
952 | QCAD (main) | Feature Request | Low | Dimensions: manually control arrow position | Assigned | |
3 |
Task Description
See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.
The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.
|
|
1100 | QCAD (main) | Feature Request | Low | Add drag dimension (snap) along dimension line | Assigned | |
3 |
Task Description
In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.
This is very useful when the two lines the needs a dimension are close together, or overlapping with another.
Attached is two images one for autocad and one for Qcad
|
|
1106 | QCAD (main) | Feature Request | Low | Add support for wipeouts | Assigned | |
3 |
Task Description
Wipeout entities can be used to hide rectangular or polygonal sections of a drawing, for example to make space for a label inside a hatch.
|
|
1126 | QCAD (main) | Feature Request | Low | Suggestion for Dimension Location setting | Assigned | |
3 |
Task Description
Please seet topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124
|
|
1157 | QCAD (main) | Feature Request | Low | Dimension settings - arrowhead style | Assigned | |
3 |
Task Description
A ‘non -filled’ arrowhead would be good to have also.
|
|
1187 | QCAD (main) | Feature Request | Low | Scale possibility for Info tools ... | Assigned | |
3 |
Task Description
Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”. It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.
|
|
1206 | QCAD (main) | Feature Request | Low | Link drawings with each other to update layers, blocks | Assigned | |
3 |
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3410
|
|
1470 | QCAD (main) | Feature Request | Low | Double line tool request | Assigned | |
3 |
Task Description
I would love to have a ‘Double Line’ tool in QCAD.
For me this would be such a time saver when drawing out building floor plans in QCAD.
|
|
1596 | QCAD (main) | Feature Request | Low | View > Selection Filter: add filter for custom properti... | Assigned | |
3 |
Task Description
See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=4840
|
|
1628 | QCAD (main) | Feature Request | Low | Move / Copy and snap tangential | Assigned | |
3 |
Task Description
Please see:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601
|
|
1674 | QCAD (main) | Feature Request | Low | Layouts and Viewports: duplicate layout block | Assigned | |
3 |
Task Description
Duplicate layout blocks
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241
|
|
1999 | QCAD (main) | Feature Request | Low | Viewport: Add additional properties for controlling dim... | Assigned | |
3 |
Task Description
When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:
1) E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed. This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.
2) Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.
The Viewport properties: https://i.imgur.com/s07JtaB.png
|
|
2182 | QCAD (main) | Feature Request | Low | Select > Select Previous | Assigned | |
3 |
Task Description
Select the previously selected entities.
|
|
2191 | QCAD (main) | Feature Request | Low | Extend the functionality of the Reorder tool | Assigned | |
3 |
Task Description
Add functions to the Reorder tool, similar to the functions of the counter tool, undo last step and start at any number, allowing corrections and restarting the tool part way through.
See the discussions at https://qcad.org/rsforum/viewtopic.php?f=32&t=8170
|
|
2288 | QCAD (main) | Feature Request | Low | Layer State Widget | Assigned | |
3 |
Task Description
The option of a layer state widget would be a nice way to see and select between different layer states.
|