|
2296 | QCAD (main) | Feature Request | Low | Custom font type and size for command line widget | Assigned | |
|
Task Description
Would be nice to change default font type and size for command line widget.
|
|
1833 | QCAD (main) | Feature Request | Low | Deep synchronize attributes feature | Assigned | |
1 |
Task Description
There is the Synchronize attributes feature which works well. But It affects only block references in the active layout(modelspace, block layout). If I want to synchronize attributes of block references in in another blocks, i have to manually go through all blocks and run synchronize attributes feature. That is the reason I would like to modify Synchronize attributes feature to affect all block references in a drawing, or add new Deep synchronize attributes feature.
|
|
990 | QCAD (main) | Feature Request | Low | Default Names for Custom Property ... | Assigned | |
|
Task Description
Property Editor - Geometry - Custom - Add Custom Property
It would be nice to have in “Application preferences” the possibility to predefine a couple Custom Property Names. Right now I use the Custom Property function to add a DIN and the Material info to every Block. This project has a lot of DIN parts and I have to type again and again the names DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... you got my point
If I have predefined Names - I have just to fill out the value
|
|
962 | QCAD (main) | Feature Request | Low | Default save / open directories | Assigned | |
1 |
Task Description
Add the option to use a fixed path for the save to, open and CAM export directories.
(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)
|
|
2295 | QCAD (main) | Feature Request | Low | Deselect all with Escape key | Assigned | |
|
Task Description
I’m used to have persistant selection while drawing (Application Preferences > Graphics View:Appearance > Selection), but I’m missing deselection of all objects with ESC key. I have seen the option to deselect with right key, but it’s nice to have right key for context menu.
Currently ESC key cancels current active command, but would be nice if there is no command active to also deselect all features by default.
|
|
986 | QCAD (main) | Feature Request | Low | Detect duplicates - only on selected area | Assigned | |
1 |
Task Description
It would be useful to have an additional option to only detect duplicates on user defined selection of drawing. Please see topic: http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145
|
|
1503 | QCAD (main) | Feature Request | Low | Detect duplicates within a given selection -new tool re... | Assigned | |
1 |
Task Description
It would be so useful to have an option to be able to detect duplicates within a given selection.
|
|
1723 | QCAD (main) | Feature Request | Low | Detecting overlapping line / arc segments | Assigned | |
4 |
Task Description
Add a tool to detect overlapping segments or lines and arcs. Similar like the “overkill” command in other CAD systems.
|
|
923 | QCAD (main) | Feature Request | Low | Diagramming (Intelligent Orthogonal Connectors) | Assigned | |
2 |
Task Description
Hi,
With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.
|
|
2060 | QCAD (main) | Feature Request | Low | Dialog box for Layer Status | Assigned | |
1 |
Task Description
So far, layer status has only been implemented very rudimentarily. I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.
|
|
1934 | QCAD (main) | Feature Request | Low | Diametric text - overlaid | Assigned | |
|
Task Description
Diametric text is always placed above a horizontal measurement.
I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.
To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.
A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.
Similarly for a vertical measurement, the text is overlaid and illegible.
When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).
Kind regards Simon
|
|
617 | QCAD (main) | Feature Request | Low | Different dimensions font sizes in the same drawing. | Assigned | |
|
Task Description
Different dimensions font sizes in the same drawing.
|
|
757 | QCAD (main) | Feature Request | Low | Dim: Architectural tick and Leader Arrow size independe... | Assigned | |
1 |
Task Description
Leader Arrow size and the Architectural tick size are controlled by one and the same value.
It would be nice to get the possibility to adjust them independently from each other ...
|
|
1714 | QCAD (main) | Feature Request | Low | Dimension > Diametric: improve display when label is mo... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408
|
|
1157 | QCAD (main) | Feature Request | Low | Dimension settings - arrowhead style | Assigned | |
3 |
Task Description
A ‘non -filled’ arrowhead would be good to have also.
|
|
1488 | QCAD (main) | Feature Request | Low | Dimension text position | Assigned | |
7 |
Task Description
This one is a really important one for me, as currently I am doing a lot of dimension and annotation drawings. I would like to request an option to be added to the dimension settings for both drawing and application settings to be able to choose whether the dimension text is to the right or left side or over the top or underneath the dimension line. This would help tremendously when a lot of dimensions are needed!
Regards
Clive
|
|
901 | QCAD (main) | Feature Request | Low | Dimension text styles | Assigned | |
|
Task Description
Support custom dimension text styles for imported DXF / DWG files.
|
|
1697 | QCAD (main) | Feature Request | Low | Dimensioning - add option for horizontal text alignment | Assigned | |
|
Task Description
Dimensioning - add option for horizontal text alignment.
Basically an option in drawing preferences to align text horizontally instead of vertically.
|
|
1699 | QCAD (main) | Feature Request | Low | Dimensioning - add option to insert text in the middle ... | Assigned | |
|
Task Description
Dimensioning - add option to insert text in the middle of dimension.
To have an option to have text aligned in the middle of the dimension line, rather than above it.
|
|
1698 | QCAD (main) | Feature Request | Low | Dimensioning - add option to split dimensions | Assigned | |
|
Task Description
Dimensioning - add option to split dimensions.
To have an option to split the extension lines if they run over other entities.
|
|
1510 | QCAD (main) | Feature Request | Low | dimensioning, rounded values | Assigned | |
|
Task Description
Approximation value for dimensioning, i.e. for example: approximate to .5 measured valure 11.3456 > displayed value 11.5
|
|
952 | QCAD (main) | Feature Request | Low | Dimensions: manually control arrow position | Assigned | |
3 |
Task Description
See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.
The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.
|
|
622 | QCAD (main) | Feature Request | Low | Disproportianal scaling of arcs, ellipses | Assigned | |
|
Task Description
Support disproportional scaling also for arcs, ellipses, other entities, not only lines and polylines with only line segments.
|
|
936 | QCAD (main) | Feature Request | Low | Disproportional scaling of block references | Assigned | |
|
Task Description
XP/32
... doesn’t works proper at circles and ellipses.
Circles: the scale works only proportional even though I have the options for x and y. Ellipses: The same but if I play around with the x, y fields it will freeze the scale possibility.
|
|
2337 | QCAD (main) | Feature Request | Low | Distance information should be available in 2D and 3D | Assigned | |
|
Task Description
As per https://qcad.org/rsforum/viewtopic.php?f=32&t=9089, I suggest to extend the distance information tools:
* show Delta Z (at least when any of the elements has Z information) * allow switching between 2D and 3D distance * maybe allow to show both * maybe change the text to distinguish between them (”Distance” → “Distance 2D/3D”)
|
|
1372 | QCAD (main) | Feature Request | Low | Distance Point to Point - option for 'added' distances | Assigned | |
2 |
Task Description
It would be useful to have an additional option to be able to count/add up consecutive distances measured with this tool ;)
|
|
625 | QCAD (main) | Feature Request | Low | Distribute block along spline, polyline, ... | Assigned | |
1 |
Task Description
See: http://www.youtube.com/watch?v=27bCgg3zLVA
|
|
972 | QCAD (main) | Feature Request | Low | Distribute equally option ... | Assigned | |
6 |
Task Description
It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.
|
|
1470 | QCAD (main) | Feature Request | Low | Double line tool request | Assigned | |
3 |
Task Description
I would love to have a ‘Double Line’ tool in QCAD.
For me this would be such a time saver when drawing out building floor plans in QCAD.
|
|
2436 | QCAD (main) | Feature Request | Low | Draw > Hatch > Hatch from Segments: mark position of op... | Assigned | |
1 |
Task Description
Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.
Same scenario tested with “Hatch from Selection” (HA) ... ... everything works like a charm
|
|
1666 | QCAD (main) | Feature Request | Low | Draw > Line > Relative Angle / Orthogonal: define lengt... | Assigned | |
|
Task Description
Add option to define length (end point) using mouse pointer.
If reference point is “Middle”, extend line from middle in both directions to mouse cursor (?).
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5205
|
|
1702 | QCAD (main) | Feature Request | Low | Draw > Polyline: add boolean operations | Assigned | |
1 |
Task Description
Add intersection, union, difference, XOR operations for closed polylines.
|
|
1298 | QCAD (main) | Feature Request | Low | Drawing Preference; File format | Assigned | |
1 |
Task Description
Hi, I get anoyed everytime saving a drawing;
File Format not recommended....... [Yes] ; I know. it's suppose to be in that format!
Saving to file...... [OK] ; I already told you
Black entities ......bla bla [OK] ; I already told you
Custom colors ...... bla bla [OK] ; I already told you
Therefore, Drawing Preferences should start with the file format choice field;
File Format: R.......
Drawing should be opened and saved in that format without any question. Please.
|
|
1911 | QCAD/CAM | Feature Request | Low | Drill Toolpath | Assigned | |
|
Task Description
Hallo Andrew
It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.
|
|
2300 | QCAD (main) | Feature Request | Low | Duplicate layout blocks with contents | Assigned | |
2 |
Task Description
Add a tool to duplicate a layout block with contents.
|
|
1824 | dwg2pdf | Feature Request | Low | dwg2pdf does not obey frozen layers in paper-space view... | Assigned | |
|
Task Description
We currently have a paper-space using two viewports with different layers from the model-space frozen. Unfortunately in the pdf output the layers which are frozen show up. dwg2pdf should obey the specific frozen layer for each viewport
|
|
1700 | dwg2pdf | Feature Request | Low | dwg2pdf: output multiple layouts | Assigned | |
|
Task Description
Add support to specify multiple blocks (layouts) to output (one per page).
|
|
1542 | dwg2svg | Feature Request | Low | dwg2svg: add switch to show only given layer(s) | Assigned | |
|
Task Description
Implement a command line switch to only show a list of given layers for dwg2* command line tools.
|
|
747 | QCAD (main) | Feature Request | Low | DXF import: dimension label | Assigned | |
|
Task Description
Add support for custom dimension labels created in 3rd party applications. Such labels may contain text that is stripped by QCAD.
|
|
1920 | QCAD (main) | Feature Request | Very Low | Edit > Application Preferences: Add preference to disab... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447
|
|
1586 | QCAD (main) | Feature Request | Low | Edit > Application Preferences: Use different color for... | Assigned | |
|
Task Description
Add preference to use a single, configurable color for all locked layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4879#p17953
|
|
1489 | QCAD (main) | Feature Request | Low | Edit > Drawing Preferences > Dimensions: Add option to ... | Assigned | |
2 |
Task Description
It would be extreamly useful to have an option to either use - or not use leader lines in the standard horizontal/vertical dimension line tools, some of the drawings I’m working on need the ‘standard’ looking dimensions with leader lines and some don’t. its a real pain to have to select - explode and delete all the leaders I don’t need.
Hoping for an option
Regards
Clive
|
|
1093 | QCAD (main) | Feature Request | Low | Edit Layer attributes by double-clicking on entry in la... | Assigned | |
2 |
Task Description
When double clicking on an entry in the layer list just nothing happens. I would prefer if this would directly open the layer attributes dialog to change color/name etc.
|
|
798 | QCAD (main) | Feature Request | Low | elaborate on purge tool | Assigned | |
1 |
Task Description
Modify the “purge layer” tool to preserve empty layers with a locked status. see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386
|
|
1976 | QCAD (main) | Feature Request | Low | Envelope at offset to a poly tool | Assigned | |
1 |
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?t=6650
|
|
2287 | QCAD (main) | Feature Request | Very Low | Evaluate draw order for preference "Prevent white-on-wh... | Assigned | |
|
Task Description
The Application Preference setting “Graphics View - Appearance - Prevent white-on-white/black-on-black display” seems to be a global setting that doesn’t take the draw order into account. For example: With the setting enabled, it prevents creating a white hatch of a higher draw order on top of a larger, colored hatch with lower draw order (background). The preference does not seem to evaluate if the object is truly drawn as “white-on-white”.
With the preference enabled, setting the object color as “white” will set the “white” color label, but the object color actually stays black. Its hard to determine why it happens in that case.
Is it possible to let the global preference setting be applied to objects after evaluation of the draw order, and determine if the object actually is a true case of white-on-white?
My workaround: Disable the preference setting (I think it is default = on), and only enable it for ad-hoc checks of hidden and overlooked objects.
|
|
2398 | QCAD (main) | Feature Request | Low | Excessive Autosave | Assigned | |
|
Task Description
Autosave currently updates the backup file indefinitely regardless of whether the drawing has been modified since the last autosave. Request only update autosave following additional edits since last autosave.
|
|
173 | QCAD (main) | Feature Request | Low | explode text to letters | Assigned | |
1 |
Task Description
implement
|
|
2378 | dwg2svg | Feature Request | Low | Export attributes on block references as namespaced XML... | Assigned | |
|
Task Description
dwg2svg supports exporting the layer name (and probably others?) as namespaced XML attributes (`qs:layer`) which works well. However I’d like to export block attributes as well, as seen on the following screenshot:
https://imgur.com/a/wUd0adE
(...so `ROOM_NAME` would become `qs:ROOM_NAME=”Eötvös terem”` on the respective XML element).
Thanks in advance.
|
|
1555 | QCAD (main) | Feature Request | Low | Export list of points. | Assigned | |
1 |
Task Description
Hello It would be great when you can add a function to export a selected object as a list of points. Is it possible to add?
Autodes DWG TrueView 2017 has this function and it is very useful. Here you can see a screenshot of this function.
|