QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummary  descStatusProgress
1749QCAD (main)Feature RequestLowAdd support for non-uniform block scalingAssigned
0%
1 Task Description

Same txt as on the forum.
had a copy because i had to log in 3 times to remark my own post.

Blocks are no solution either.

see pdf
[attachment=0]Block test_1.pdf[/attachment]

Antartica is put in a block as segments.
Added a rounded corner as segments and as poly.
scaled X x0.5 Y x1 origin the center of the magenta circl.

The scaled version is all over the place.
Set them to color red, no use they stay black.

The reference of the block is 2000mm to the left because I tried it out far right of my design.
The cyan circle is about 400mm in diameter.

dxf part included
[attachment=1]Block test.dxf[/attachment]

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)

CVH

832QCAD (main)Feature RequestLowAdd shortcut to fastly enter ortho modeAssigned
0%
Task Description

When drawing or moving objects holding down CTRL should activate ortho snapping as long as CTRL is pressed.

If ortho mode has been active before holding down CTRL should deactivate it (for the time it is beeing pressed).

1601QCAD (main)Feature RequestLowAdd regex to text search & replaceAssigned
0%
Task Description

Add a more versatile way of doing a search and replace for text. Regular expressions maybe?

1156QCAD (main)Feature RequestLowAdd preference to force toolbars to be floatingAssigned
0%
Task Description

Would it be possible to have the choice to dock or not dock toolbars - in other words keep them floating, an additional option in the tool settings could be added?

1155QCAD (main)Feature RequestLowAdd preference for solid line crosshairsAssigned
0%
Task Description

Would it be possible to have the choice of either dashed or solid lines for the large cross hairs?

1152QCAD (main)Feature RequestLowAdd preference for snap label and snap cursor shape / c...Assigned
0%
Task Description

Would it be possible to have options for:

1.Enable or disable Snap label with text.

2.To have a ‘Snap Marker’ with style and colour choice instead of snap label.

* It would be good for users to have the choice.


1159QCAD (main)Feature RequestLowAdd preference for button option instead of drop down m...Assigned
0%
2 Task Description

For some tools like the Horizontal or vertical line, it would be good to have button options (similar to infinite and ray line buttons) instead of the drop down menus.

1647QCAD (main)Feature RequestLowAdd point / dot option for leaders Assigned
0%
Task Description

Hi Andrew,

Hopefully you might be able to squeeze this one around your busy schedule.

Would it be possible to add in the property editor an option to change a dimension arrow to a point / filled dot and maybe also a tick?

I see you are working on some viewport stuff, I am very much looking forward to testing some of this out ;).

Many thanks

Clive

1613QCAD (main)Feature RequestLowAdd Orthogonal Option to Angelur DIM Tool ...Assigned
0%
1 Task Description

... please see below:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

1576QCAD (main)Feature RequestLowadd option to switch off dialog for modify: rotate tool...Assigned
0%
1 Task Description

To improve the flow of drawing I’d like to switch off the dialog for the rotate tool. Most of the times i use the interactive input and delete the original. So I don’t need to click a popup to acknowledge that.
I allready use the same option for the move/copy tool.

695QCAD (main)Feature RequestLowAdd more dimension arrow styles (e.g. dots)Assigned
0%
Task Description

Add more dimension arrow styles (e.g. dots).

See forum thread:
http://qcad.org/rsforum/viewtopic.php?f=31&t=2185

823QCAD (main)Feature RequestLowAdd Midpoint Handles to Lines and PolylinesAssigned
0%
1 Task Description

The Midpoint Handles should be used to move Polyline Segments and lines. This would add easy to access stretch functionality.
Combined with a shortcut(hold down shift or alt etc.) to fix the movement to be orthogonal to the line this would bring a lot of extra value.
It would also be possible to to have another shortcut to easily insert nodes to Polylines (again hold shift or alt etc.)

1099QCAD (main)Feature RequestLowAdd Leader with text and number bubbleAssigned
0%
1 Task Description

Having leader with numbers and text would be awesome to better interact with the drawing and making BOM lists.

Currently it takes too mush time to make the leaders with text and number bubbles.

1254QCAD (main)Feature RequestLowAdd drop object along a path with automatic trimAssigned
0%
Task Description

Add drop object along a path with automatic trim.

  1. The object can be a selection before or after selecting the tool, an entity or a block.
  1. The path can be another entity from a start point to an end point.
  1. Dropping can be made on one side or the other (like in other tools depending on the side of the cursor), with a choice of miroring the object or not.
  1. The number of drops or the distance between can be selected.
  1. The distance can be between a control point of the object or its sysmetry axis or border.
  1. The dropping direction can be selected too.
  1. The droping depth can be constrained : all control points have passed the path, or one of them. Alternatively, replace control points by an entity belonging to the object.

Exemple of use case : equidistant drills in a curved rail. The dropping depth constraint enables for example to ensure a drill has a minimal depth when not orthogonal to a plan.

1100QCAD (main)Feature RequestLowAdd drag dimension (snap) along dimension lineAssigned
0%
1 Task Description

In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.

This is very useful when the two lines the needs a dimension are close together, or overlapping with another.

Attached is two images one for autocad and one for Qcad

1649QCAD (main)Feature RequestVery LowAdd configuarable format options for saving blocks to l...Assigned
0%
Task Description

Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.

1713QCAD (main)Feature RequestLowAdd attribute value "By Parent" for child layersAssigned
0%
Task Description

Add attribute value “By Parent” for color, line weight, line style for child layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407

1629QCAD (main)Feature RequestLowAdd additional Option to Angelur DIM ToolAssigned
0%
Task Description

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

639QCAD (main)Feature RequestLowAbility to load a file of keyboard shortcutsAssigned
0%
Task Description

It would be useful if a file of keyboard shortcuts to commands could be loaded.

Then a set of shortcuts identical/based on the Autocad keyboard shortcuts can be loaded, making it much easier for Autocad users to migrate to your product.

There does seem to be some future functionality planned here, with the shortcut ‘scheme’ selector in Program Preferences, but for the moment ‘Qcad’ is the only option available.

This strategy is used to great effect by Draftsight (but who trusts a big company like Dassault/Solidworks...)

1473QCAD (main)Feature RequestLow"Partial" circular/radial dimensionsAssigned
0%
Task Description

This is kind of related to FS#952, or rather a superset of it.

Consider the situation in the attached image. There is a perfectly good, albeit really shallow arc, making the radius somewhere in the vicinity of 600 millimeters, and the radial dimension being drawn accordingly.

Considering the other dimensions of the part, this is completely unusable, even to work with, really, but definitely so when it needs to be put on paper.

It would be nice to have some sort of “partial” (for my lack of a better word) radial/diametric dimensions where the dimension length can be adjusted.

Considering that this can be done with Leader, maybe a better (more generic) solution would be for Leader type dimensions to have options so they could automatically generate labels for various dimensions of a selected entity – sort of like having the Prefix/Tolerance/Scale options the other dimensions have, and have some additional fields there for selected entity and maybe dimension type (for example, radial or diametric for an arc-type entity).

860QCAD (main)Feature RequestLow"Create Library item from selection" default Path ...Assigned
0%
1 Task Description

Default Path for “Create Library item from selection” / “Save us” is C:\Programme\QCAD pro 3.1.6 ...
... regardless of the settings in the “Application Preferences / Library Browser / for Library Sources.
And QCAD doesn’t remember the last path choice ....

If I have to save 50 Library Items I have to navigate 50 times thru my system to find - the same place.

It would be nice if QCAD would point in first place to the Library Source or, at least, remember the last used path ... ;-)

681QCAD (main)Feature RequestLow'Plug-in' for Gear generatorAssigned
0%
1 Task Description

Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc...
To produce 2D templates for all sorts of projects.

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

Showing tasks 251 - 273 of 273 Page 6 of 6<<First - 2 - 3 - 4 - 5 - 6

Available keyboard shortcuts

Tasklist

Task Details

Task Editing