QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
1681QCAD (main)Feature RequestLowAuto-dimensioningAssigned
0%
Task Description

You can apply the command to Lines, PolyLine segments, Arcs, Circles, and Rings:

For linear entities parallel to an axis of the coordinate system, aligned Dimensions (parallel Dimensions) are created. For linear entities not parallel to an axis of the coordinate system, either aligned Dimensions (measuring the absolute distance between two points) or horizontal or vertical Dimensions (measuring the horizontal or vertical distance between two points) depending on where you move the pointer are created.

For curved entities, you can create radial, diameter, linear, angular, and arc length Dimensions.

To dimension entities:

Click Dimension > Auto (or type AutoDimension).
In the graphics area, select an entity to dimension.
Click to place the dimension line.
To use another dimension type for Circles or Arcs, specify an option:
Diameter. Creates a diameter Dimension.
Radial. Creates a radial Dimension for an Arc or Circle.
Linear. Creates a linear Dimension of the diameter of a Circle or an aligned, horizontal, or vertical Dimension between the end points of an Arc.
Angular. Dimensions the angle between the end points of an Arc.
Arc length. Dimensions an Arc length.
Note: The chosen option is the default the next time you use the AutoDimension command.

When you move the pointer during a linear dimensioning, you can:
Lock. Determines the current dimension type (aligned, horizontal, or vertical) regardless where you move the pointer.
Unlock. Unlocks the type of linear dimension used.
Press Enter.

***
In short, when you use this tool you click on an entity and it will know what dimension you’re looking for. For Circles, you can specify in the command window R or D for Radius or Diameter.
This would be extremely useful on large drawings where a lot of dimensioning is to be done. One tool and start clicking on entities for dimensioning.

1697QCAD (main)Feature RequestLowDimensioning - add option for horizontal text alignmentAssigned
0%
Task Description

Dimensioning - add option for horizontal text alignment.

Basically an option in drawing preferences to align text horizontally instead of vertically.

1698QCAD (main)Feature RequestLowDimensioning - add option to split dimensionsAssigned
0%
Task Description

Dimensioning - add option to split dimensions.

To have an option to split the extension lines if they run over other entities.

1699QCAD (main)Feature RequestLowDimensioning - add option to insert text in the middle ...Assigned
0%
Task Description

Dimensioning - add option to insert text in the middle of dimension.

To have an option to have text aligned in the middle of the dimension line, rather than above it.

1700dwg2pdfFeature RequestLowdwg2pdf: output multiple layoutsAssigned
0%
Task Description

Add support to specify multiple blocks (layouts) to output (one per page).

1701QCAD (main)Feature RequestLowLayer List / Block List: add filter inputAssigned
0%
Task Description

Add text filter for layer list, block list.

1702QCAD (main)Feature RequestLowDraw > Polyline: add boolean operationsAssigned
0%
Task Description

Add intersection, union, difference, XOR operations for closed polylines.

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

1713QCAD (main)Feature RequestLowAdd attribute value "By Parent" for child layersAssigned
0%
Task Description

Add attribute value “By Parent” for color, line weight, line style for child layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407

1714QCAD (main)Feature RequestLowDimension > Diametric: improve display when label is mo...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408

1721QCAD (main)Feature RequestLowInsert table toolAssigned
0%
2 Task Description

Hi Andrew,

I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)

Many thanks

Clive

1722QCAD (main)Feature RequestLowOption to insert viewport at either of the rectangle co...Assigned
0%
1 Task Description

Hi Andrew,

Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.

Hope that makes sense.

Many thanks

Clive

1723QCAD (main)Feature RequestLowDetecting overlapping line / arc segmentsAssigned
0%
5 Task Description

Add a tool to detect overlapping segments or lines and arcs.
Similar like the “overkill” command in other CAD systems.

1731QCAD (main)Feature RequestLowOption to place text to other sideAssigned
0%
1 Task Description

Hi Andrew,

It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(

Many thanks

C;live

1749QCAD (main)Feature RequestLowAdd support for non-uniform block scalingAssigned
0%
1 Task Description

Same txt as on the forum.
had a copy because i had to log in 3 times to remark my own post.

Blocks are no solution either.

see pdf
[attachment=0]Block test_1.pdf[/attachment]

Antartica is put in a block as segments.
Added a rounded corner as segments and as poly.
scaled X x0.5 Y x1 origin the center of the magenta circl.

The scaled version is all over the place.
Set them to color red, no use they stay black.

The reference of the block is 2000mm to the left because I tried it out far right of my design.
The cyan circle is about 400mm in diameter.

dxf part included
[attachment=1]Block test.dxf[/attachment]

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)

CVH

1755QCAD (main)Feature RequestLowSelecting standard rotation angles by mouse click for M...Assigned
0%
1 Task Description

This would be nice.
It will save a lot mouse - keypad changes for me.

1772QCAD (main)Feature RequestLowGo back on right-click on shaded Tool buttonAssigned
0%
Task Description

Right-click on the tools on the left-hand side of the screen brings you back in the hierarchy.

However, that does not work if you right-click while hovering above a button that that is shaded (inactive).

1810QCAD (main)Feature RequestLowChange icons from black on white to white on black depe...Assigned
0%
Task Description

Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window.
See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970

1811QCAD (main)Feature RequestLowZoom 1:1Assigned
0%
Task Description

It would be nice to be able to adjust the zoom factor so that the scale on the screen matches a ruler which I lay on the screen.

Thanks!

1815QCAD/CAMFeature RequestLowAdd Laser tool optionAssigned
0%
Task Description

Hi Andrew,

Creating G-code for cnc-laser, the laser-tool can not be correctly set at all.

Attached a laser tool proposal

1823dwg2pdfFeature RequestLowplotting error to pdf a Dwg where the view port is not ...Assigned
0%
Task Description

When trying to plot a dwg or a dxf to pdf where the viewport is orientated to a different angle than north up
the data in the view port is plotted north up.
see attached DWG and pdf for clarification.

1824dwg2pdfFeature RequestLowdwg2pdf does not obey frozen layers in paper-space view...Assigned
0%
Task Description

We currently have a paper-space using two viewports with different layers from the model-space frozen. Unfortunately in the pdf output the layers which are frozen show up.
dwg2pdf should obey the specific frozen layer for each viewport

1826QCAD (main)Feature RequestLowguide lines when extending lines Assigned
0%
Task Description

When using the SHIFT key while dragging the end point a perpendicular guide line is displayed (see attached screenshot).
It would be very helpful if other guide lines with x=const. and y= const. are displayed when pressing SHIFT + ALT key together while dragging.

1827QCAD (main)Feature RequestLowProperty Editor: Accept advanced scale expressions for ...Assigned
0%
Task Description

Hi,

Identical scale expression used in Print Preview like 5:1, 5/1, 5”=1”, 5 are working flawless like expected.
Same expression used in a Viewport scale leads to different outcomes.

The Property Editor used to fix that in Paper_Space does also not accept those standard expressions.

1833QCAD (main)Feature RequestLowDeep synchronize attributes featureAssigned
0%
1 Task Description

There is the Synchronize attributes feature which works well. But It affects only block references in the active layout(modelspace, block layout). If I want to synchronize attributes of block references in in another blocks, i have to manually go through all blocks and run synchronize attributes feature. That is the reason I would like to modify Synchronize attributes feature to affect all block references in a drawing, or add new Deep synchronize attributes feature.

752QCAD (main)Feature RequestVery LowAdd support for the 3dConnexion Space Navigator (Pan an...Assigned
0%
3 Task Description

The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.

3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand

While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

1426QCAD (main)Feature RequestVery LowLoad drawings that were open when closing QCAD on start...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1649QCAD (main)Feature RequestVery LowAdd configuarable format options for saving blocks to l...Assigned
0%
Task Description

Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.

1788QCAD (main)Feature RequestVery LowNew snap: reference points of a block referencesAssigned
0%
Task Description

I know this was reported and fixed before ...

https://www.qcad.org/bugtracker/index.php?do=details&task_id=843

... but it looks like we have the issue now back with some kind of variation.

If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.

If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.

Edit: New Test drawing:

Showing tasks 251 - 281 of 281 Page 6 of 6<<First - 2 - 3 - 4 - 5 - 6

Available keyboard shortcuts

Tasklist

Task Details

Task Editing