|
2467 | QCAD (main) | Bug Report | Low | macOS M1/M2 setup with multiple screens: crash during i... | Assigned | |
|
Task Description
I sometimes start QCAD Pro on a project and then go do something else after a while, leaving it open in the background.
At least 5 times now it died in this state, in the background, without user activity, giving me the ‘quit unexpectedly’ dialog.
Here’s some part of the log that macOS collects when that happens:
-------------------------------------
Translated Report (Full Report Below)
-------------------------------------
Process: QCAD-Pro [62952]
Path: /Applications/QCAD-Pro.app/Contents/MacOS/QCAD-Pro
Identifier: org.qcad
Version: 3.28 (3.28.0)
Code Type: ARM-64 (Native)
Parent Process: launchd [1]
User ID: 501
Date/Time: 2023-04-15 15:39:31.3443 +0200
OS Version: macOS 13.3.1 (22E261)
Report Version: 12
Anonymous UUID: 7BF39A64-2E31-A624-4A66-896554C6DEC0
Sleep/Wake UUID: 8D811F79-BAFA-4D25-BDA4-DF99AEE2DE0E
Time Awake Since Boot: 300000 seconds
Time Since Wake: 1 seconds
System Integrity Protection: enabled
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000018
Exception Codes: 0x0000000000000001, 0x0000000000000018
Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11
Terminating Process: exc handler [62952]
VM Region Info: 0x18 is not in any region. Bytes before following region: 105553518919656
REGION TYPE START - END [ VSIZE] PRT/MAX SHRMOD REGION DETAIL
UNUSED SPACE AT START
--->
MALLOC_NANO (reserved) 600018000000-600020000000 [128.0M] rw-/rwx SM=NUL ...(unallocated)
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 QtGui 0x104c3b884 QMacCGContext::QMacCGContext(QPainter*) + 44
1 libqmacstyle.dylib 0x1063fe838 0x1063f4000 + 43064
2 libqmacstyle.dylib 0x106405fec 0x1063f4000 + 73708
3 QtWidgets 0x1055263e4 QCommonStyle::drawControl(QStyle::ControlElement, QStyleOption const*, QPainter*, QWidget const*) const + 2132
4 libqmacstyle.dylib 0x10640379c 0x1063f4000 + 63388
5 QtWidgets 0x105562000 0x1054b4000 + 712704
6 QtWidgets 0x10568c474 QTabBar::paintEvent(QPaintEvent*) + 1584
7 QtWidgets 0x105508f70 QWidget::event(QEvent*) + 132
8 QtWidgets 0x10568bcd4 QTabBar::event(QEvent*) + 736
9 QtWidgets 0x1054bf520 QApplicationPrivate::notify_helper(QObject*, QEvent*) + 272
10 QtWidgets 0x1054c0ffc QApplication::notify(QObject*, QEvent*) + 3396
11 QtCore 0x1065b7570 QCoreApplication::notifyInternal2(QObject*, QEvent*) + 292
12 QtWidgets 0x1054fc214 QWidgetPrivate::drawWidget(QPaintDevice*, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 3312
13 QtWidgets 0x105503890 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 864
14 QtWidgets 0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
15 QtWidgets 0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
16 QtWidgets 0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
17 QtWidgets 0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
18 QtWidgets 0x1054fc314 QWidgetPrivate::drawWidget(QPaintDevice*, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 3568
19 QtWidgets 0x105519aec QWidgetRepaintManager::paintAndFlush() + 3872
20 QtWidgets 0x105519d70 QWidgetRepaintManager::sync() + 252
21 QtWidgets 0x105509410 QWidget::event(QEvent*) + 1316
22 QtWidgets 0x105624f10 QMainWindow::event(QEvent*) + 248
23 QtWidgets 0x1054bf520 QApplicationPrivate::notify_helper(QObject*, QEvent*) + 272
24 QtWidgets 0x1054c0ffc QApplication::notify(QObject*, QEvent*) + 3396
25 QtCore 0x1065b7570 QCoreApplication::notifyInternal2(QObject*, QEvent*) + 292
26 QtWidgets 0x105516800 QWidgetRepaintManager::sendUpdateRequest(QWidget*, QWidgetRepaintManager::UpdateTime) + 604
27 QtWidgets 0x105516540 void QWidgetRepaintManager::markDirty<QRect>(QRect const&, QWidget*, QWidgetRepaintManager::UpdateTime, QWidgetRepaintManager::BufferState) + 1748
28 QtWidgets 0x10551fdcc 0x1054b4000 + 441804
29 QtCore 0x106600ce4 0x106550000 + 724196
30 QtGui 0x1049b47c4 QWindowPrivate::emitScreenChangedRecursion(QScreen*) + 80
31 QtGui 0x1049aa348 QScreen::~QScreen() + 700
32 QtGui 0x1049aa3b0 QScreen::~QScreen() + 12
33 QtGui 0x1049bec7c QWindowSystemInterface::handleScreenRemoved(QPlatformScreen*) + 36
34 libqcocoa.dylib 0x103de7d80 0x103db8000 + 195968
35 libqcocoa.dylib 0x103de65d0 0x103db8000 + 189904
36 libqcocoa.dylib 0x103dfb014 0x103db8000 + 274452
37 QtCore 0x1065c63d8 QMetaMethod::invoke(QObject*, Qt::ConnectionType, QGenericReturnArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument) const + 1072
38 libqcocoa.dylib 0x103dfe45c 0x103db8000 + 287836
39 CoreFoundation 0x18e193240 __CFNOTIFICATIONCENTER_IS_CALLING_OUT_TO_AN_OBSERVER__ + 128
40 CoreFoundation 0x18e22ef30 ___CFXRegistrationPost_block_invoke + 88
41 CoreFoundation 0x18e22ee78 _CFXRegistrationPost + 440
42 CoreFoundation 0x18e164580 _CFXNotificationPost + 704
43 Foundation 0x18f0c19e4 -[NSNotificationCenter postNotificationName:object:userInfo:] + 88
44 AppKit 0x1915834bc __67-[NSWindow _updateSettingsSendingScreenChangeNotificationToScreen:]_block_invoke + 496
45 AppKit 0x1913ff7e0 NSPerformVisuallyAtomicChange + 108
46 AppKit 0x1915832c0 -[NSWindow _updateSettingsSendingScreenChangeNotificationToScreen:] + 96
47 AppKit 0x1916c3ec0 -[NSWindow _screenChanged:] + 136
48 AppKit 0x1916c3e18 -[NSWindow _displayChangedSoAdjustWindows:] + 112
49 AppKit 0x191d3156c -[_NSFullScreenContentController displayChanged] + 28
50 AppKit 0x191dd5834 -[_NSFullScreenSpace displayChanged] + 48
51 AppKit 0x191dd4504 _fullScreenInstanceMovedSpaces + 208
52 SkyLight 0x192da9e34 (anonymous namespace)::notify_datagram_handler(unsigned int, CGSDatagramType, void*, unsigned long, void*) + 888
53 SkyLight 0x1930e9c84 CGSDatagramReadStream::dispatchMainQueueDatagrams() + 228
54 SkyLight 0x1930e9b80 invocation function for block in CGSDatagramReadStream::mainQueueWakeup() + 28
55 libdispatch.dylib 0x18df0e874 _dispatch_call_block_and_release + 32
56 libdispatch.dylib 0x18df10400 _dispatch_client_callout + 20
57 libdispatch.dylib 0x18df1ebf8 _dispatch_main_queue_drain + 928
58 libdispatch.dylib 0x18df1e848 _dispatch_main_queue_callback_4CF + 44
59 CoreFoundation 0x18e1dfc88 __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 16
60 CoreFoundation 0x18e19d4a8 __CFRunLoopRun + 1992
61 CoreFoundation 0x18e19c58c CFRunLoopRunSpecific + 612
62 HIToolbox 0x1979d1df4 RunCurrentEventLoopInMode + 292
63 HIToolbox 0x1979d1c30 ReceiveNextEventCommon + 648
64 HIToolbox 0x1979d1988 _BlockUntilNextEventMatchingListInModeWithFilter + 76
65 AppKit 0x1913bbf58 _DPSNextEvent + 636
66 AppKit 0x1913bb0f4 -[NSApplication(NSEvent) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 716
67 AppKit 0x1913af558 -[NSApplication run] + 464
68 libqcocoa.dylib 0x103dcd0d8 0x103db8000 + 86232
69 QtCore 0x1065c0994 QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) + 532
70 QtCore 0x1065b7c0c QCoreApplication::exec() + 128
71 libqcadjsapi.dylib 0x116ab5648 QCoreApplication_WrapperSingleton::exec() + 24
72 libqcadjsapi.dylib 0x11625d1b8 QCoreApplication_WrapperSingleton::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) + 684
73 libqcadjsapi.dylib 0x11625d930 QCoreApplication_WrapperSingleton::qt_metacall(QMetaObject::Call, int, void**) + 100
74 QtQml 0x1045e58f8 0x1044b8000 + 1235192
75 QtQml 0x1045e245c 0x1044b8000 + 1221724
76 QtQml 0x1045e0f30 QV4::QObjectMethod::callInternal(QV4::Value const*, QV4::Value const*, int) const + 956
77 QtQml 0x1045fef88 QV4::Runtime::CallProperty::call(QV4::ExecutionEngine*, QV4::Value const&, int, QV4::Value*, int) + 420
78 QtQml 0x10462bc00 0x1044b8000 + 1522688
79 QtQml 0x10462aaec 0x1044b8000 + 1518316
80 QtQml 0x1045a5c18 0x1044b8000 + 973848
81 QtQml 0x1045fef88 QV4::Runtime::CallProperty::call(QV4::ExecutionEngine*, QV4::Value const&, int, QV4::Value*, int) + 420
82 QtQml 0x10462bc00 0x1044b8000 + 1522688
83 QtQml 0x10462aaec 0x1044b8000 + 1518316
84 QtQml 0x1045a5c18 0x1044b8000 + 973848
85 QtQml 0x1045fed60 QV4::Runtime::CallName::call(QV4::ExecutionEngine*, int, QV4::Value*, int) + 388
86 QtQml 0x10462c11c 0x1044b8000 + 1523996
87 QtQml 0x10462aaec 0x1044b8000 + 1518316
88 QtQml 0x1045a2744 QV4::Function::call(QV4::Value const*, QV4::Value const*, int, QV4::ExecutionContext*) + 368
89 QtQml 0x104603dfc QV4::Script::run(QV4::Value const*) + 228
90 QtQml 0x10454a5a0 QJSEngine::evaluate(QString const&, QString const&, int, QList<QString>*) + 336
91 libqcadjsapi.dylib 0x11692bf9c RScriptHandlerJs::doScript(QString const&, QList<QString> const&) + 336
92 libqcadcore.dylib 0x1036fd5b8 RScriptHandler::autostart(QString const&, QList<QString> const&) + 2000
93 QCAD-Pro 0x102f7d87c main + 4996
94 dyld 0x18dd67f28 start + 2236
Thread 1:: com.apple.CFSocket.private
0 libsystem_kernel.dylib 0x18e08aff0 __select + 8
1 CoreFoundation 0x18e1c81e8 __CFSocketManager + 636
2 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
3 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 2:: com.apple.NSEventThread
0 libsystem_kernel.dylib 0x18e07ff14 mach_msg2_trap + 8
1 libsystem_kernel.dylib 0x18e092240 mach_msg2_internal + 80
2 libsystem_kernel.dylib 0x18e088b78 mach_msg_overwrite + 604
3 libsystem_kernel.dylib 0x18e080290 mach_msg + 24
4 CoreFoundation 0x18e19e8b8 __CFRunLoopServiceMachPort + 160
5 CoreFoundation 0x18e19d198 __CFRunLoopRun + 1208
6 CoreFoundation 0x18e19c58c CFRunLoopRunSpecific + 612
7 AppKit 0x1914e6508 _NSEventThread + 172
8 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
9 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 3:
0 libsystem_pthread.dylib 0x18e0bad8c start_wqthread + 0
Thread 4:
0 libsystem_pthread.dylib 0x18e0bad8c start_wqthread + 0
Thread 5:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 6:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 7:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 8:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 9:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 10:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 11:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 12:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 13:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 14:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 15:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 16:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 0 crashed with ARM Thread State (64-bit):
x0: 0x0000000000000000 x1: 0x000000016ce88f28 x2: 0x000000016ce88f00 x3: 0x000000016ce88f28
x4: 0x000000016ce88d68 x5: 0x0000000000000011 x6: 0x0000000000000000 x7: 0x000000016ce87ed8
x8: 0x0000000113f799f0 x9: 0x0000000106418530 x10: 0x0000000000179f41 x11: 0x0000000000219e00
x12: 0x000000012de03fa8 x13: 0x0000000000000020 x14: 0x000000012de00000 x15: 0x0000000000000020
x16: 0x0000000104c3bb34 x17: 0x000000012dea34d0 x18: 0x0000000000000000 x19: 0x000000016ce88bd8
x20: 0x0000000000000000 x21: 0x000000016ce88f28 x22: 0x000000014de58530 x23: 0x000000014de58530
x24: 0x0000000000000001 x25: 0x0000000000008001 x26: 0x0000000000008000 x27: 0x00000001e9523460
x28: 0x0000000000000002 fp: 0x000000016ce88ba0 lr: 0x0000000104c3b880
sp: 0x000000016ce88b40 pc: 0x0000000104c3b884 cpsr: 0x60001000
far: 0x0000000000000018 esr: 0x92000006 (Data Abort) byte read Translation fault
Binary Images:
0x102f70000 - 0x102f7ffff org.qcad (3.28) <50923e35-b0f4-33ad-87b5-c80b6e07fb18> /Applications/QCAD-Pro.app/Contents/MacOS/QCAD-Pro
0x1035cc000 - 0x1039fffff libqcadcore.dylib (*) <68b6cf9d-e03f-30ac-a74f-0fae66240b13> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadcore.dylib
0x103100000 - 0x1031a3fff libqcadentity.dylib (*) <185c94cd-8860-3723-9c74-185a1b18c0e0> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadentity.dylib
0x10323c000 - 0x103293fff libqcadgui.dylib (*) <57e28a4d-f6fd-3b3d-9465-702d9b0dbb86> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadgui.dylib
0x102ff4000 - 0x103003fff libqcadgrid.dylib (*) <2d7b7164-4c14-3ce7-bbe0-49ec38a68fa0> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadgrid.dylib
0x103050000 - 0x10306ffff libqcadoperations.dylib (*) <c884af96-582c-3be3-a77e-100c27bfbb77> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadoperations.dylib
0x10308c000 - 0x10309ffff libqcadsnap.dylib (*) <0630cbf2-cbeb-3a02-8fa7-e0c17fdb666c> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadsnap.dylib
0x103014000 - 0x10301ffff libqcadspatialindex.dylib (*) <d834db84-bb6b-369c-b967-1148a481ed6f> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadspatialindex.dylib
0x103370000 - 0x1033b7fff libspatialindexnavel.dylib (*) <05a48089-e554-3429-b0c3-eccd0fc9f1f3> /Applications/QCAD-Pro.app/Contents/Frameworks/libspatialindexnavel.dylib
0x103514000 - 0x103573fff org.qt-project.QtOpenGL (6.4) <6fe5bbb7-45dc-316b-8c8f-4d455fee11ad> /Applications/QCAD-Pro.app/Contents/Frameworks/QtOpenGL.framework/Versions/A/QtOpenGL
0x1030b4000 - 0x1030dffff org.qt-project.QtSql (6.4) <3974ce4c-632e-3d00-bbd1-088875642482> /Applications/QCAD-Pro.app/Contents/Frameworks/QtSql.framework/Versions/A/QtSql
0x1032fc000 - 0x103333fff org.qt-project.QtSvg (6.4) <4c4477bd-616f-3de0-912d-934a2b143af2> /Applications/QCAD-Pro.app/Contents/Frameworks/QtSvg.framework/Versions/A/QtSvg
0x103444000 - 0x10345bfff org.qt-project.QtXml (6.4) <e1e4e15c-d26c-3800-b8f1-c8a792ffec55> /Applications/QCAD-Pro.app/Contents/Frameworks/QtXml.framework/Versions/A/QtXml
0x1044b8000 - 0x10482ffff org.qt-project.QtQml (6.4) <51bb2e01-4ec1-3719-a2f6-36cf30380e0e> /Applications/QCAD-Pro.app/Contents/Frameworks/QtQml.framework/Versions/A/QtQml
0x103ea0000 - 0x103fa7fff org.qt-project.QtNetwork (6.4) <2d4bab25-001a-3333-b3db-b95d9aca025f> /Applications/QCAD-Pro.app/Contents/Frameworks/QtNetwork.framework/Versions/A/QtNetwork
0x103474000 - 0x1034bbfff org.qt-project.QtPrintSupport (6.4) <2c160c73-f509-3e7b-b281-1e17179314d2> /Applications/QCAD-Pro.app/Contents/Frameworks/QtPrintSupport.framework/Versions/A/QtPrintSupport
0x1054b4000 - 0x105903fff org.qt-project.QtWidgets (6.4) <d4530615-1625-3bd4-ad4f-c808d616fd39> /Applications/QCAD-Pro.app/Contents/Frameworks/QtWidgets.framework/Versions/A/QtWidgets
0x1048f0000 - 0x104f03fff org.qt-project.QtGui (6.4) <755184d6-c551-391a-b2ed-6413cb06df19> /Applications/QCAD-Pro.app/Contents/Frameworks/QtGui.framework/Versions/A/QtGui
0x106550000 - 0x1069bbfff org.qt-project.QtCore (6.4) <0039ed8f-97d9-3555-a1fb-c8281b2a9e1c> /Applications/QCAD-Pro.app/Contents/Frameworks/QtCore.framework/Versions/A/QtCore
0x102fd4000 - 0x102fd7fff org.qt-project.QtConcurrent (6.4) <b2015105-c358-332c-8b3f-5debfd79c737> /Applications/QCAD-Pro.app/Contents/Frameworks/QtConcurrent.framework/Versions/A/QtConcurrent
0x103d18000 - 0x103d93fff org.qt-project.QtDBus (6.4) <63c9ff9a-567f-3dac-8abc-3c30823ab0c2> /Applications/QCAD-Pro.app/Contents/Frameworks/QtDBus.framework/Versions/A/QtDBus
0x103db8000 - 0x103e4ffff libqcocoa.dylib (*) <d3d12a1e-d996-3265-885a-a8e474f79f50> /Applications/QCAD-Pro.app/Contents/PlugIns/platforms/libqcocoa.dylib
0x1063f4000 - 0x106417fff libqmacstyle.dylib (*) <52b5adc6-8fd3-3577-9c61-ed57cfe4032e> /Applications/QCAD-Pro.app/Contents/PlugIns/styles/libqmacstyle.dylib
0x10dc48000 - 0x110467fff libqcaddwg.dylib (*) <97457f76-7e3d-3eaf-a495-534031592cb6> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcaddwg.dylib
0x106434000 - 0x1064e7fff org.qt-project.QtCore5Compat (6.4) <8437f179-2c2b-3e52-938f-3a0d3dda4d14> /Applications/QCAD-Pro.app/Contents/Frameworks/QtCore5Compat.framework/Versions/A/QtCore5Compat
0x109c34000 - 0x109c87fff libqcaddxf.dylib (*) <6b64540e-e48a-3cdb-96f3-d596dcd2c3e6> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcaddxf.dylib
0x116200000 - 0x11919bfff libqcadjsapi.dylib (*) <3b3a8e88-1c63-3489-8045-f2ddaa719727> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadjsapi.dylib
0x105464000 - 0x105477fff libqcadstemmer.dylib (*) <7a8fbfa6-eb3a-341b-a3ba-5703dbbdc01d> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadstemmer.dylib
0x109d18000 - 0x109d4ffff libqcadpolygon.dylib (*) <9f63281b-3e5c-3eaa-97a5-206e21f5d899> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadpolygon.dylib
0x109e7c000 - 0x109edffff org.qt-project.QtUiTools (6.4) <516ccc55-f406-3440-b0e8-9e02016a67db> /Applications/QCAD-Pro.app/Contents/Frameworks/QtUiTools.framework/Versions/A/QtUiTools
0x106508000 - 0x10650ffff org.qt-project.QtOpenGLWidgets (6.4) <41848e91-ab63-32f6-b910-fd0bb41ad833> /Applications/QCAD-Pro.app/Contents/Frameworks/QtOpenGLWidgets.framework/Versions/A/QtOpenGLWidgets
0x105440000 - 0x105447fff libconcavehull.dylib (*) <d837fe15-b71a-3baa-8e53-a5368e9a6340> /Applications/QCAD-Pro.app/Contents/Frameworks/libconcavehull.dylib
0x10a43c000 - 0x10a887fff libqcadpdf.dylib (*) <093902bd-646d-3997-a16d-f2f07180189c> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadpdf.dylib
0x10b0a4000 - 0x10b7a7fff libqcadproscripts.dylib (*) <d8cdf77e-e618-3ae8-bb92-42999537eb7e> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadproscripts.dylib
0x10c3ac000 - 0x10cf67fff libqcadscripts.dylib (*) <8018c668-8fb9-3b03-8a2e-ebae0dbc23c8> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadscripts.dylib
0x109cc0000 - 0x109cd3fff libqcadshp.dylib (*) <ab708ab4-c3a9-3758-84fc-4f0ff08ff60d> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadshp.dylib
0x106524000 - 0x10652bfff libqgif.dylib (*) <fabce6ac-714a-3884-bd73-6faf33bbd4d2> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqgif.dylib
0x109d70000 - 0x109d77fff libqwbmp.dylib (*) <dc542b64-fd8e-30ba-864f-099d1e5a788b> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqwbmp.dylib
0x109d88000 - 0x109df3fff libqwebp.dylib (*) <275f6c12-b594-3ec1-8002-afae818a8deb> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqwebp.dylib
0x109e08000 - 0x109e0ffff libqico.dylib (*) <c39c4792-e821-3d0e-a51e-4c91092b2cbf> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqico.dylib
0x109e20000 - 0x109e27fff libqmacheif.dylib (*) <28e973af-8681-333a-8e06-ca0ef139c6f1> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqmacheif.dylib
0x10af88000 - 0x10afc7fff libqjpeg.dylib (*) <4a19d30b-c91f-3c5e-93e6-313b73aded30> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqjpeg.dylib
0x10afdc000 - 0x10b03bfff libqtiff.dylib (*) <ebd99856-9f3e-374d-adec-78591b8e5ecb> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqtiff.dylib
0x109e38000 - 0x109e3ffff libqsvg.dylib (*) <55448c8b-cdbb-3509-8e76-498a4e6909c1> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqsvg.dylib
0x109e50000 - 0x109e57fff libqicns.dylib (*) <fb8078bc-26e3-3404-9712-2820f6dccc99> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqicns.dylib
0x10a348000 - 0x10a34ffff libqtga.dylib (*) <ae8c892d-3d68-32e2-823e-02d20a1273ae> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqtga.dylib
0x10a360000 - 0x10a367fff libqmacjp2.dylib (*) <3a65cf03-f572-371d-813a-469eedc9151f> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqmacjp2.dylib
0x1054a0000 - 0x1054abfff libobjc-trampolines.dylib (*) <80f14f3d-d099-3693-a8e0-eb9a526b1790> /usr/lib/libobjc-trampolines.dylib
0x10dc14000 - 0x10dc1ffff libqsvgicon.dylib (*) <59fc1d66-aaf2-3b22-8dd8-2eca5e04bf88> /Applications/QCAD-Pro.app/Contents/PlugIns/iconengines/libqsvgicon.dylib
0x113748000 - 0x113757fff libqcadcustomwidgets.dylib (*) <8f944d85-4001-384d-befb-d6c2c9fe74c2> /Applications/QCAD-Pro.app/Contents/PlugIns/designer/libqcadcustomwidgets.dylib
0x18e11f000 - 0x18e5f8fff com.apple.CoreFoundation (6.9) <b4fdaece-9727-3969-b014-27f7f24c8e01> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x18f0b8000 - 0x18fa7dfff com.apple.Foundation (6.9) <b7d67e5a-dce2-3f6b-b2b8-895a3669e3ec> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x191383000 - 0x192291fff com.apple.AppKit (6.9) <cc3e5215-4cd7-364c-8750-6eb7002720ce> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x192d9f000 - 0x1931c7fff com.apple.SkyLight (1.600.0) <e3d1dd9e-fa1b-332e-86ba-cc2915276118> /System/Library/PrivateFrameworks/SkyLight.framework/Versions/A/SkyLight
0x18df0c000 - 0x18df53fff libdispatch.dylib (*) <8e87dc0e-a570-3933-b37d-5e05ad516206> /usr/lib/system/libdispatch.dylib
0x1979a1000 - 0x197cd4fff com.apple.HIToolbox (2.1.1) <5f34bbf5-653a-31a5-b4b3-0a02c91ab488> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox
0x18dd62000 - 0x18ddf053b dyld (*) <ac277a36-1808-327a-8761-cca585421212> /usr/lib/dyld
0x18e07f000 - 0x18e0b8fe7 libsystem_kernel.dylib (*) <7acbd9bc-d056-310e-858d-81b116cf6d28> /usr/lib/system/libsystem_kernel.dylib
0x18e0b9000 - 0x18e0c5fff libsystem_pthread.dylib (*) <b401cfb3-8dfe-32db-92b3-ba8af0f8ca6e> /usr/lib/system/libsystem_pthread.dylib
0x0 - 0xffffffffffffffff ??? (*) <00000000-0000-0000-0000-000000000000> ???
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=1.4G resident=0K(0%) swapped_out_or_unallocated=1.4G(100%)
Writable regions: Total=5.5G written=0K(0%) resident=0K(0%) swapped_out=0K(0%) unallocated=5.5G(100%)
VIRTUAL REGION
REGION TYPE SIZE COUNT (non-coalesced)
=========== ======= =======
Accelerate framework 256K 2
Activity Tracing 256K 1
CG backing stores 7680K 8
CG image 496K 22
ColorSync 624K 28
CoreAnimation 240K 15
CoreGraphics 48K 3
CoreUI image data 3584K 26
Foundation 48K 2
JS VM Gigacage 76.0M 19
JS VM Isolated Heap 23.2M 22
JS VM Isolated Heap (reserved) 2048K 1 reserved VM address space (unallocated)
Kernel Alloc Once 32K 1
MALLOC 3.1G 160
MALLOC guard page 192K 9
MALLOC_MEDIUM (reserved) 2.0G 17 reserved VM address space (unallocated)
MALLOC_NANO (reserved) 256.0M 1 reserved VM address space (unallocated)
STACK GUARD 56.3M 17
Stack 16.5M 17
VM_ALLOCATE 624K 28
__AUTH 1366K 290
__AUTH_CONST 21.2M 487
__CTF 824 1
__DATA 6428K 527
__DATA_CONST 30.6M 539
__DATA_DIRTY 1488K 168
__FONT_DATA 2352 1
__INFO_FILTER 8 1
__LINKEDIT 850.3M 51
__OBJC_RO 66.2M 1
__OBJC_RW 2011K 1
__TEXT 568.2M 554
dyld private memory 320K 4
mapped file 480.4M 47
shared memory 960K 19
=========== ======= =======
TOTAL 7.5G 3090
TOTAL, minus reserved VM space 5.3G 3090
|
|
1462 | QCAD (main) | Bug Report | Low | Mac Trackpad zoom gesture not working as expected | Assigned | |
1 |
Task Description
Hi,
I am using mac version and I have annoying issue with trackpad. I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows. Mouse wheel / two finger swipe: Scroll (Trackpad... Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around) Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page) Reverse mouse wheel direction for zoom :unticked Mouse wheel zoom factor: 1.02
Things work as expected:
Issue I am experiencing:
Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler. The mouse point remains where it is.
Workaround: Reset viewpoint with autozoom and navigate around.
Expected zoom behaviour: I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.
|
|
2290 | QCAD (main) | Bug Report | Very Low | loading the Drawing Preferences using enter, using ente... | Assigned | |
|
Task Description
I use CTRL + I to pull up drawing preferences. Upon changing the dimension settings quickly and closing it normally by pressing enter it closes. But if i go to the next tab (drawing tab) then press enter to load it up quickly instead of pressing CTRL + I. Upon changing the dimensions settings and pressing enter to close it, it won’t close but instead flash and i have to keep pressing enter and eventually it closes.
I think this is a bug.
I have the Pro Version
|
|
2498 | QCAD (main) | Bug Report | Low | Light/dark mode UI colours depend on OS theme when QCAD... | Assigned | |
1 |
Task Description
On macOS 14.1 and QCAD 3.28.2, the state of the OS (light or dark theme) affects some of the QCAD colour palette for the life of the session. So far I’ve noticed the problem with the keyboard shortcuts in tooltips and text in the command line output, but there may be other instances of the problem.
To reproduce:
1. Set the OS to light mode.
2. Start QCAD. Note the keyboard shortcuts in the tooltips are optimised for a light palette.
3. With QCAD still running, switch the OS to dark mode.
4. Note that while most of the QCAD interface switches to a dark mode palette, the keyboard shortcuts in the tooltips do not.
A similar behaviour is observed when starting from dark mode and switching to light mode.
I hope that makes sense. See attached screenshots for examples.
|
|
584 | QCAD (main) | Bug Report | Low | Library Items können unbrauchbar gemacht werden durch l... | Assigned | |
1 |
Task Description
Nach einigen Überraschungen ....
Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....
Fallbeispiel 1: Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt. Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat. Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will. In der Blocklist ist es natürlich immer noch verfügbar. In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden. Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt. Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.
Fallbeispiel 2: Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.
Fallbeispiel 3: Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....
Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?
|
|
1339 | QCAD (main) | Bug Report | Low | Library Browser unstoppable | Assigned | |
|
Task Description
Hi,
Even with the Application Preference, Library Browser, NO Update on Start up, the Libray Browser scans the directory, a proces that can’t be stopped or closed.
|
|
893 | QCAD (main) | Bug Report | Low | Library Browser - Edit Library Item - opens drawings al... | Assigned | |
|
Task Description
Library Browser - Edit Library Item - opens drawings always with grid.
- If I switch between opened drawings back and forth the grid will disappear .... - If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....
Just Cosmetic ...
|
|
2386 | QCAD Community Edition | Bug Report | Low | Label "Linear format" missing in Property Editor | Assigned | |
|
Task Description
no task description |
|
2415 | QCAD (main) | Bug Report | Very Low | Issues with OffsetBothSides | Assigned | |
1 |
Task Description
Andrew,
I can’t find any documentation concerning OffsetBothSides under Misc .. Modify. It is not listed in the QCAD features nor in the changelog.
There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.
The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline. It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.
There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing. The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.
I only successfully created a dual offset for open Splines, open or logically open Polylines. All other attempts result in a single offset at the indicated side.
There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected. Only tested it on a Win7 platform. I don’t suspect that version 3.27.8 includes a fix for that ...
Regards, CVH
|
|
1691 | QCAD (main) | Bug Report | Very Low | Issue with Layouts after "File-Revert" | Assigned | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically. 2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .
For example can try on “flange.dxf”
|
|
498 | QCAD (main) | Bug Report | Low | issue importing from Autocad | Assigned | |
|
Task Description
There is an issue importing from Autocad: lines and quotes (both arrows and text) appear too much big (see attachment). I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick. Autocad’s dxf are opened with right line thickness but wrong quotes. Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.
|
|
714 | QCAD (main) | Bug Report | Low | Isometric view tool bar doesn`t remain ' docked'. | Assigned | |
|
Task Description
Win 7 - 64 Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.
|
|
980 | QCAD (main) | Bug Report | Low | Isometric Projection / blocks / wrong layer are used in... | Assigned | |
|
Task Description
Isometric Projection used on a selection which contains blocks will mix up the layer affiliations. No blocks - no problems
|
|
772 | QCAD (main) | Bug Report | Low | Isometric grid: toggle buttons not updated | Assigned | |
1 |
Task Description
- Switch isometric grid off - Switch isometric grid on using drawing preferences - Tool buttons don’t reflect correct status
|
|
2494 | QCAD (main) | Bug Report | Very Low | Information scrip on drawing screen unaligned. | Waiting on User | |
|
Task Description
Please view the attachment.
Regards
Graeme
|
|
645 | QCAD (main) | Bug Report | Low | Inch - Layerdata / Linewight still in mm ... | Assigned | |
|
Task Description
Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....
I like it ... but maybe I’m the only one
|
|
1203 | dxflib | Bug Report | Low | Images not saved (dxflib) | Assigned | |
|
Task Description
I am doing a bit of landscaping and using a (big) ortophoto as one of my layers in order to sanity-check on the ground measurements.
The layer contains a point and the image and nothing else.
The image is a 8MB file: “PNG image data, 4200 x 2980, 8-bit/color RGB, non-interlaced” and it is scaled to 210 coordinate units (meter) horizontally in the drawing.
With approx 50% probability the image disappears during Save, as see for instance in this diff of the DXF file:
@@ -158699,28 +153057,6 @@ AcDbXrecord
90
6
0
-IMAGEDEF
- 5
-A1
-100
-AcDbRasterImageDef
- 90
-0
- 1
-/critter/HTV10/Ortofoto/ortofoto201502f.png
- 10
-210.0
- 20
-149.0
- 11
-1.0
- 21
-1.0
-280
-1
-281
-0
- 0
ENDSEC
0
EOF
The point in the same layer does not similarly disappear, the bug only seems to affect images.
I have seen this bug from version 3.7.5.0 to git as of yesterday (63e06c778926a803bdfbffdf27b8c24d41511072).
I have not been able to correlate the bug with anything.
Looking closer at the DXF file (attached), there seems to be some residuce of attempts to insert images in protected/invisible layers, so this may be some kind of refcounting issue.
(Any chance of getting FreeBSD into the “Operating System” field ?)
|
|
2264 | QCAD (main) | Bug Report | Low | Hatching segment selection stops at entity - hatch patt... | Assigned | |
1 |
Task Description
QCAD Professional Windows7 pro WinInstaller Version: 3.26.4.5 (3.26.4.5) Internet: QCAD.org Build Date: Jul 20 2021 Revision: e596276 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
In the example given by ‘turtle’ .. why_is_this_not_closed-v2.dxf https://www.qcad.org/rsforum/viewtopic.php?f=32&p=34157#p34153
Selecting hatch boundary segments of the horizontal polyline segment at (1169.933593;274.432562)-(1089.933593;274.432562)
Segment selection stops where the AR-CONC hatch pattern touches the horizontal segment. Such intersections points where already no longer regarded as snappoints. See :
FS#2090 : https://www.qcad.org/bugtracker/index.php?do=details&task_id=2090. Related topic https://www.qcad.org/rsforum/viewtopic.php?&t=7340&p=28414#p28414
Regards, CVH
|
|
1972 | QCAD (main) | Bug Report | Low | Hatch import fails for boundaries with many very small ... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648
|
|
2440 | QCAD (main) | Bug Report | Very Low | Hatch from Segments > False positives open loop warning... | Assigned | |
1 |
Task Description
Andrew,
Most probably not related to OS or QCAD version.
When hatching an area with Hatch from Segments (HS) there might be false positive warnings on open loops. It seems that this is related to the orientation of the indicated segments and the order of selection. The real problematic position is not always the first that is reported. Loop count is increased even if it is a single loop.
Included a basic test drawing to replicate these. Further details to replicate the issue are in the file.
Regards, CVH
|
|
2252 | QCAD (main) | Bug Report | Low | Freeze / crash when selecting clamped splines (not crea... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8531
|
|
2014 | QCAD (main) | Bug Report | Low | Focus on Options Toolbar fails | Assigned | |
|
Task Description
Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.
Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828
|
|
2450 | QCAD (main) | Bug Report | Low | Flip Block with Attributes horizontaly fails | Assigned | |
|
Task Description
A block with Attributes can’t be flipped (Option bar) horizontally. The Attributes will be rotated 180° instead of been mirrored. Other entities in the block flip correctly. Same block flipped vertically works as expected (Mirrored Attributes). Same block flipped with FH or MI works as expected. (Mirrored Attributes).
|
|
2391 | QCAD Community Edition | Bug Report | Low | Fix Dark Theme for Linux | Assigned | |
|
Task Description
The dark theme for Linux is broken:
- Some icons have dark background (expected) and black foreground color (that should be replaced by white of very light gray) - Some icons have light background (not cohesive with the theme). - The command history shows dark blue font on dark gray background. - The grid’s ruler shows black font over dark background for the numbers. - The icons folder is missing in the GitHub repository, but other themes have that folder. - The general icons (open, save, and so on) are not dark theme friendly. A better approach for maybe all the themes would be to use something like the breeze icons pack for LibreOffice, and it will have the added benefit of making the app look more modern.
The icons issue is the biggest problem. They should probably replace the black color for white or very light gray. Even the red accent color is not ideal for dark themes, is not the main issue.
Attached is an image that show the problems and another that shows LibreOffice with the Dark Breeze theme for reference.
|
|
1974 | QCAD (main) | Bug Report | Very Low | File > Print Preview: Cannot move paper in new drawing | Unconfirmed | |
|
Task Description
Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.
Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.
Affected versions tested:
Windows 64bit installer download, as of yesterday. Linux 64bit build from git, about 20minutes ago.
For what it’s worth, this bug is not present in this previous git checkout:
Version: 3.21.1.0 (3.21.1) Internet: QCAD.org Build Date: Jul 2 2018 Revision:
Qt Version: 5.7.0 Architecture: x86_64 Compiler: gcc 6.3.1
Thanks for a great product.
|
|
2483 | QCAD (main) | Bug Report | Low | File > Open: MLeaders with text not imported | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10159
|
|
1923 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polylines with Global/Local Widths and... | Assigned | |
1 |
Task Description
Win7pro 32bit Qcad 3.23.0
Andrew, The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.
In the attached drawing setting the Global Z of the inner poly to 5,10,...
The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly. It also affects the projected widths of the line inversely, but not by changing the widths properties.
Pritty rare combination! True. Qcad is 2D native! True.
Flatten will resolve this.
It is not a purely visual rendering fault, the poly will explode as such.
Maybe similar flaw as with uneven scaling blocks with arcs. https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703
Regards
|
|
2155 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polyline Arcs with Width = 2R | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Most likely not related to the QCAD version, rather an old sore.
File included Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803 Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’
Polyline arcs with Width = 2R render as circle segments rather than circle sectors. As Non-reversed arcs these don’t explode. As reversed arc these explode to a single arc rather than a circle sector contour.
There is also still the faulty rendering with Z not zero https://qcad.org/bugtracker/index.php?do=details&task_id=1923
Regards, CVH
|
|
976 | dxflib | Bug Report | Low | DXF import errors related to hatches, texts | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677
|
|
1008 | QCAD (main) | Bug Report | Low | DXF (dxflib) compat issues | Assigned | |
|
Task Description
Git head as well as 3.4.5 (trial), both with dxflib 3.3.4.0.
Start up QCAD, (with existing or new configuration, doesn’t seem to matter), “Save as” the completely empty drawing, choose “R15 (dxflib)” on Pro (only this one is available on community), save drawing.
Fire up AutoCAD 2000, try to load the empty drawing just saved.
Result:
DXF read error
Error in APPID Table
DXF read error on line 941.
Invalid or incomplete DXF input -- drawing discarded.
Problem not present when a completely empty drawing saved using Teigha in R15 format is opened (ie. it just results in an empty drawing in AutoCAD 2000). Problem is also not present when saving an existing drawing with Pro (trial) with Teigha and opening it in AutoCAD 2000. Problem does present when trying to open a dxflib-saved drawing in AutoCAD 2000.
Empty drawings created with both dxflib 3.3.4.0 in QCAD Pro 3.4.5 trial and Teigha whatever in QCAD Pro trial 3.4.5 are attached. (Community Git 135fd0 is identical to Pro - same dxflib version.)
|
|
2462 | QCAD (main) | Bug Report | Low | DWG import issue: m^2 gets weird "\A1" | Assigned | |
|
Task Description
I’ve opened an existing, old dwg file in the Professional Trial edition, file(1) says it’s “DWG AutoDesk AutoCAD 2004/2005/2006”. It contains (among other stuff) a floor plan with areas in m^2. A PDF export (from the original software used at the time, probably autocad) shows that this was displayed correctly. However, in QCAD, I get a “\A1” and a very small number 2 instead. I’ll attach screenshots.
|
|
2325 | QCAD (main) | Bug Report | Low | dwg file crashes QCAD | Assigned | |
|
Task Description
Regarding to forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8982&p=35836#p35836
dwg loaded in 3.27.1 frees QCAD (no response) and a Win10 PC. Same drawing loaded in 3.26.0 causes no problems. It looks to me that two hatches (handle 198b6, 198ba) are the culprits. Drawing saved without those hatches opens without any problem in 3.27.1.
TECNOFLEX symbol library.dwg = original file from forum post TECNOFLEX symbol library_mod.dwg = my modification
|
|
2328 | QCAD (main) | Bug Report | Very Low | drop down, using keyboard | Assigned | |
|
Task Description
Minor issue! When using keyboard to initiate the dropdown menus. I noticed the ALT “D” does not cycle through the headings Draw & Dimension in the same way. ALT “M” cycles though Modify & Misc or ALT “S” cycles though Select & Snap. User Name: StanTibbs E-mail: [email protected]
|
|
2160 | QCAD (main) | Bug Report | Low | Draw > Polyline > Relocate Start Point: fails on polyli... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Origin: I like to start my CAM paths at low curvature instead starting at high curvature. Ellipses may explode with the startpoint at the tip. (file Y2)
Documented in 3.25.2.4, reproducible under 3.25.2.7
File included with 4 LayerStates - Original Ellipses: Y1 - Exploded to polylines (32 segments): Y2 - Direct after XP, OR performs different on the left top one: Y3 - Faulty solutions by OR: Y4 (= saved state)
The results may differ with the saved explosions.
With the file. Y1 TA XP Relocate startpoint with OR to an existing reference (called ‘End’)
Regards, CVH
|
|
2159 | QCAD (main) | Bug Report | Low | Draw > Polyline > Polyline from Selection: may induce N... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32 Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Discovered in 3.25.2.4, reproducible under 3.25.2.7
Draw any open or closed chain of line entities. Select All. OC to Polyline. Step through vertices.
No example file provided because these NaN values are not saved to a file. More pronounced with lines as with arcs. Less pronounced when recombining after an explosion. Some methods clear these to value = void. Some methods clear these to zero (OR). Can also occur when adding segments to an existing polyline with OC.
Regards, CVH
|
|
2497 | QCAD (main) | Bug Report | Very Low | Draw > Circle > 3 Tangents (CT3) fails in some cases wi... | Assigned | |
1 |
Task Description
Andrew,
See attachment with example:
Solution included on layer ‘Solution’.
Regards, CVH
|
|
756 | QCAD (main) | Bug Report | Low | Display problem in the Text "Character Map" ... | Assigned | |
1 |
Task Description
XP/32
Go to: Text → Special Characters → Others → “Character Map” pops up. Adjust Zoom to 100% = display problem (not enough space for the single character.
|
|
2405 | QCAD Community Edition | Bug Report | Low | Dimension scaling not working | Assigned | |
|
Task Description
I’m using QCAD Community Edition 3.27.7 on Windows 11.
When I started my drawing, I was able to change the size scale factor of (existing) dimensions using “Edit/Drawing Preferences/Dimension/Dimension Settings/Size scale factor”. However, suddenly this feature stopped working and now I cannot switch the dimension scale factor any longer.
I used this feature to be able to adapt the scale factor of the dimensions when printing in different scales. I.e. all my drawings are in “original” size but when it comes to printing, I print some parts in scale 1:2 (in which case I used to set the size scale factor of the dimensions to 2) and some parts in scale 1:10 (in which case I used to set the scale factor of the dimensions to 10). Using this procedure, the dimensions have the same size (font size, arrow size, gaps etc.) on both drawings.
I have attached the drawing, that shows the described issues.
|
|
2099 | QCAD (main) | Bug Report | Low | DIM Label, Square Symbol doesn't adopt layer attributes | Assigned | |
|
Task Description
The square symbol offered as symbol in DIM label is the only symbol which doesn’t adopt the layer color. If I print a drawing in full color it leads to a black symbol in an otherwise colored dimension.
It is also the only symbol which has a solid filling what is confusing when you work with it in Model_Space ...
|
|
2551 | QCAD (main) | Bug Report | Low | Cursor and visualization problems | Assigned | |
|
Task Description
The last version (3.29.4) present a very important issue. When we work with a “complicated” file (about >1MB or up see attachment test.dwg) the cursor and selected object not work fine after move some layout windows in Paper_Space: disappear coordinates informations and snap nodes. (see attachment before.png an after.png) This issue is present in all Qcad version (Linux, Mac-intel, Mac-silicon, Windows). The last working-fine version is 3.28.2 I’m a enthusiastic Qcad user and I hop that this issue will be fixed early! Regards Arch. Riccardo Beduschi
|
|
1843 | QCAD/CAM | Bug Report | Low | Creating ToolPath Stalls | Assigned | |
|
Task Description
Hi Andrew,
Still working with and on CAM HPGL for the HP7580 pen plotter.
I have added a penplotter test drawing, that might be used for testing en callibrating plotter and pens. You may add it to the Examples-directory.
QCAD has a lot of trouble creating toolpaths and exports. Much too often it shuts itself down, or gets stalled. Why? I am not sure.
|
|
2266 | QCAD (main) | Bug Report | Low | Crash while creating an angular dimension | Assigned | |
|
Task Description
no task description |
|
2381 | QCAD (main) | Bug Report | Low | Crash when modifying toolbar settings | Assigned | |
|
Task Description
QCAD Professional 3.27.6.0 running on macOS 12.4 (21F79)
QCAD sometimes crashes when I am adding or removing items from toolbars. It isn’t consistent and I haven’t seen a pattern about which items trigger the crash. It has happened while editing different files, but I’ve attached attached a very simple example and two crash reports
|
|
2092 | QCAD (main) | Bug Report | Low | crash when changing shortcut in preferences | Assigned | |
|
Task Description
The application crashes when I try to change a shortcut in the preferences. And only after resizing the preferences window. In the attachement are the cli warnings. I also tried the 3.24.3.9 snapshot with the same result.
|
|
2315 | QCAD Community Edition | Bug Report | Low | Crash after ~10-th times move Spline nodes | Assigned | |
|
Task Description
1. Create spline 2. Move spline nodes. After ~10 times move qcad is crashed with backtrace: Thread 9 “Thread (pooled)” received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fff56dc9640 (LWP 8224)] 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848) at /usr/include/qt5/QtCore/qlist.h:492 492 current→v = new T(*reinterpret_cast<T*>(src→v)); (gdb) bt #0 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848)
at /usr/include/qt5/QtCore/qlist.h:492
#1 QList<QSharedPointer<RShape> >::detach_helper (alloc=<optimized out>, this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:835 #2 QList<QSharedPointer<RShape> >::detach_helper (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:849 #3 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #4 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #5 0x00007ffff686182a in QList<QSharedPointer<RShape> >::end (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/qlist.h:342 #6 QList<QSharedPointer<RShape> >::last (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:364 #7 RSpline::appendToExploded (this=0×555557311510, line=...) at math/RSpline.cpp:964 #8 0x00007ffff6867059 in RSpline::getExploded (this=0×555557311510, segments=1457293328) at math/RSpline.cpp:919 #9 0x00007ffff686682a in RSpline::getLength (this=this@entry=0×555557311510) at math/RSpline.cpp:1026 #10 0x00007ffff6c11490 in RSplineData::getLength (this=<optimized out>, this=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineData.h:178 #11 RSplineEntity::getProperty (this=0x5555573114a0, propertyTypeId=..., humanReadable=<optimized out>, noAttributes=<optimized out>,
showOnRequest=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineEntity.cpp:253
#12 0x00007ffff67cc214 in RPropertyEditor::computePropertyValue (ccProp=...) at /usr/src/debug/qcad-3.27.0.0/src/core/RPropertyEditor.cpp:574 #13 0x00007ffff67d298f in QtConcurrent::FunctionWrapper1<void, RProperty&>::operator() (u=..., this=0x555557757f18)
at /usr/include/qt5/QtConcurrent/qtconcurrentfunctionwrappers.h:80
#14 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIteration (it=..., this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:68
#15 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIterations (this=0x555557757ee0,
sequenceBeginIterator=..., beginIndex=<optimized out>, endIndex=15) at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:77
#16 0x00007ffff67d2c9d in QtConcurrent::IterateKernel<QList<RProperty>::iterator, void>::forThreadFunction (this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentiteratekernel.h:255
#17 0x00007ffff44b5b2d in QtConcurrent::ThreadEngineBase::run (this=0x555557757f20) at qtconcurrentthreadengine.cpp:302 #18 0x00007ffff59c8d52 in QThreadPoolThread::run (this=0x555556198b10) at thread/qthreadpool.cpp:100 #19 0x00007ffff59c5a61 in QThreadPrivate::start (arg=0x555556198b10) at thread/qthread_unix.cpp:329 #20 0x00007ffff546c717 in start_thread (arg=<optimized out>) at pthread_create.c:435 #21 0x00007ffff54f018c in clone3 () from /lib64/libc.so.6 (
|
|
2157 | QCAD (main) | Bug Report | Low | Controlpoint Spline exploded to polyline may induce NaN... | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Documented in 3.25.2.4, reproducible under 3.25.2.7 In the attached file: → Explode the trial cases and locate NaN Widths. → These faulty widths are cleared while saving and reverting. = work around.
Related Post: https://www.qcad.org/rsforum/viewtopic.php?t=7902#p30902 Related Topic: https://www.qcad.org/rsforum/viewtopic.php?t=7901 Related Commit: https://github.com/qcad/qcad/commit/fcd7929bced7ae328029c1aa2ee2aff2745709c6
Arctic_Eddie reports failing CAM offset at exactly these points !!! Reported is a faulty arc with radius of over 360,000mm. - I can not reproduce this under QCAD working further on the Polys with NaNs. - However the direct offset of such controlpoint Splines is erroneous. (see file in post 30902)
Arctic_Eddie reports arc radii of over 10,000mm. - These don’t seem to be faulty. - I agree that BiArc fitting should be bound to a lower and certainly to an upper limit. - That should be huge otherwise faint curvature is represented by many wobbles or too quick by straight lines. (All this, keeping in mind that QCAD doesn’t return the optimum fitted BiArc, see: https://www.qcad.org/rsforum/viewtopic.php?t=4859)
Regards, CVH
|
|
2453 | QCAD (main) | Bug Report | Low | Control point Splines - Issue with Closed & Minimal poi... | Assigned | |
1 |
Task Description
Andrew, For more detailed description please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=33&p=40081#p40081
In the included screen grab below, left is when drawn cubic, closed periodic, from 4 points. Right is when the file is re-loaded.
It is hard to select the incorrect shape when pointing near it ... Probably it is referring to the correct internal shape. After drawing it explodes to a Null length polyline with 2 identical vertices.
I can’t include the error in a file as it reverts on re-load.
The same issue exist for quadratic, closed periodic, from 3 points.
Regards, CVH
|
|
2167 | QCAD/CAM | Bug Report | Low | Comma format decimal separator fails ZSafety CAM config... | Assigned | |
1 |
Task Description
QCAD/CAM Trial package Win installer 32 bit Version: 3.25.2.0 (3.25.2) Internet: QCAD.org Build Date: Sep 4 2020 Revision: 4a61501 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Local decimal separator is ‘,’ (comma) In CAM configuration .. Z Levels .. Safety level
Using nn,nnn the output is Nxx G0 Znn Using nn.nnn the output is Nxx G0 Znn.nnn
Drop down boxes are all in dot format. Didn’t try anything else yet
Regards, CVH
|
|
2041 | QCAD (main) | Bug Report | Low | circletangent2 doesn't solve correctly if the defining ... | Assigned | |
|
Task Description
In my example I can’t draw a circle with circletangent2 if the defining point is on one of the defining tangents. The tangency is lost when I try to do this.
I attached 4 screenshots: TheExample.png, TryingPoint1.png, TryingPoint2.png and The_Point_Isn’t_On_The_Tangents.png.
|
|
1971 | QCAD/CAM | Bug Report | Low | CAD/CAM 3D Simulator | Assigned | |
|
Task Description
Hallo Andrew,
Found a bug in the 3D Simulator execution
|