QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
1765QCAD (main)Bug ReportVery LowErrors with polyline offsetAssigned
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360° curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

1762QCAD (main)Bug ReportVery LowModify // .... selection of entities on locked layer al...Assigned
Task Description

Not served with the degration to ‘Suggestion’ FS#1759.
Demanded closing FS#1759 & re-entered

Locking entities (by layer) to avoid selection,eg. nearby,very close by or on the same spot, does not have the intended influence.

Asumed wrong:
- Modify DI
- Modify B2
- Modify D3
- Modify MT
These 4 need a single entity to be selected and selection of a locked entity is allowed.(=questionable)
The action will allways leed to ‘not allowed’.(=correct)

- Modify RM
- Modify CH
- Modify RN
These 3 need a pair of entities.
RM: Selection of a locked limiting entity is allowed (=questionable), enity to trim not.(=correct)
The action will trim unlocked entities to the locked limiter.(=questionable)
CH & RN: Selection of a pair of entities is allowed.(=questionable)
Trimming if ‘trim’ is on will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation of the bevel or rounding on an active locked layer will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation, except for polyline segments (because locked themself), on an active unlocked layer will be done.(=correct)

Less severe but still questionable: (because these don’t necerally act on the locked entities themselves)
- Modify OF
- Modify OH
- Modify SS
OF: Selection of a locked base entity is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
OH: Selection of a locked base entity is allowed.(=questionable)
Selection of point references from entities on locked layers is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
SS: Selection of point references from entities on locked layers is allowed.(=questionable)
Strechting is only done for unlocked entities. (=correct)

1760QCAD (main)Bug ReportVery LowSelf-crossing polylines can't be cut twice at segment c...Assigned
Task Description

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 


1743QCAD (main)Bug ReportVery LowDraw > Text: Wrong bounding box for text with empty sup...Assigned
1 Task Description


I have a drawing where I use text with superscript. In this case when I use autozoom, it does not work as I expect. It includes the 0,0 coordinates too. The problem also occures when I export the drawing into svg.

I attached an example, just use the autozoom.


1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

1692QCAD (main)Bug ReportVery LowIssue with Layouts. "Viewport" enteties are not highlig...Assigned
Task Description

QCad 3.19.2 Professional, 64bit, Linux Mint

1. Open some drawing with viewport entities on layout block (paper scace). Print Preview mode is “On” automatically.
2. Switch to “Black/White Mode” from toolbar and move cursor on “Viewport” enteties. This entitie is not highlighted. With other enteties all works as expected.
In “Full Color Mode” and “Grayscale Mode” no problems.

For example can try on “flange.dxf”

1691QCAD (main)Bug ReportVery LowIssue with Layouts after "File-Revert"Assigned
Task Description

QCad 3.19.2 Professional, 64bit, Liux Mint

1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically.
2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .

For example can try on “flange.dxf”

1660QCAD (main)Bug ReportVery LowViewport in Model Space ...Assigned
Task Description

... I have the feeling that wasn’t the idea. I’m correct?

in Model Space, launch Add Viewport, determine the Viewport rectangle - when done QCAD will switch to a Layout Block.
Now in Layout Block, don’t(!) place the Viewport, switch back to Model Space and the Viewport is still attached to the Mouse pointer and you can place it in your Model Space. The source of the Viewport will then disappear.

1587QCAD (main)Bug ReportVery LowPDF export created with wrong date timeAssigned
Task Description

Hi guys,

when I export my dxf drawing to pdf, the pdf properties shows wrong “created date”. I am in UTC+2, the date shows 2 hours less.
I exported the pdf at 12:24, the attached ps shows 10:24.


1518QCAD (main)Bug ReportVery LowLandscape/Portrait gets confused for custom page sizeAssigned
Task Description


In the Print Preview or Drawing Preferences / Page Settings if I select a Custom size, then landscape/portrait does not really make sense.

For instance, at work we have a laser cutter which uses a printer driver. The bed of the laser is 600 wide by 300 high. When I wanted to cut
something, I created a custom page size of 600×300 and selected Landscape (because it is wider than high)

Strangely, back in the Print Preview, the page is now sized opposite with regards to Portrait / Landscape mode, which was confusing somewhat.

(see pictures attached)

I think that for ‘Custom’ page size in Drawing Preferences, the option of Portrait or Landscape should probably be ghosted

Then, I think that for Portrait / Landscape mode in the Print Preview, it should display the shape most appropriate, rather than just assuming that the document fits the norm:

  1. Taller than Wide for Portrait mode
  2. Wider than Tall for Landscape mode
1462QCAD (main)Bug ReportLowMac Trackpad zoom gesture not working as expectedAssigned
1 Task Description


I am using mac version and I have annoying issue with trackpad.
I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows.
Mouse wheel / two finger swipe: Scroll (Trackpad...
Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around)
Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page)
Reverse mouse wheel direction for zoom :unticked
Mouse wheel zoom factor: 1.02

Things work as expected:

  • panning with two finger swipe
  • and the rest

Issue I am experiencing:

Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler.
The mouse point remains where it is.

Reset viewpoint with autozoom and navigate around.

Expected zoom behaviour:
I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.

1460QCAD (main)Bug ReportVery LowTwo Display Environment --> Problems with Toolboxes and...Assigned
1 Task Description


I’m unsing a two display environment and got all Tools and Widgets placed on the second display.
See qcad1.png

There are two problems:

1.) When I open another application on second display, three toolboxes stay on top, the others are behind new application.
See qcad2.png

2.) When I minimize Qcad only the mainwindow will be minimuzed, all the toolboxes and widgets stay on second display also with problem 1.
See qcad3.png

Whould be great, when this issues will be fixed :-)

Thank you very much

P.S.: Hope described well, if not, please drop me a reply...

1445QCAD (main)Bug ReportLowSwitching off grid scaling can break rulersAssigned
Task Description

See also:

1443QCAD (main)Bug ReportVery LowView > Status Bar remains uncheckedAssigned
Task Description

Status Bar menu remains unchecked even it is toggled on or off

1427QCAD (main)Bug ReportLowInfo Tool / Polylinie Area (II)/ Preview brokenAssigned
Task Description

Print “Command Line” and as “Add measurement to drawing” works as expected.

1424QCAD (main)Bug ReportVery LowEdit > Undo: hatches not selectedAssigned
Task Description

If a hatch is selected, then rotated or scaled and this is undone afterwards, the hatch is not selected anymore.

1369QCAD/CAMBug ReportVery Lowqcad-bin is trying to access non-existent /home/andrewAssigned
Task Description

I experience long start delays. I’ve trace the problem to the fact that I have autofs automounting my home directories. However, an strace of qcad-bin shows the following:

execve("/opt/ribbonsoft/qcad/qcad-3.12.6/qcad-bin", ["/opt/ribbonsoft/qcad/qcad-3.12.6"...], [/* 87 vars */]) = 0
brk(NULL)                               = 0x1eca000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd6194ad000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib", 0x7fff4722f250) = -1 ENOENT (No such file or directory)

Since there is no “andrew” user here, I have to wait for automount to timeout which takes about 2m and is rather annoying.

1339QCAD (main)Bug ReportLowLibrary Browser unstoppableAssigned
Task Description


Even with the Application Preference, Library Browser, NO Update on Start up,
the Libray Browser scans the directory, a proces that can’t be stopped or closed.

1242QCAD (main)Bug ReportLowSVG import DPI box should use localized decimal separat...Assigned
Task Description

I wanted to make it so, that SVG units translate 1:1 into CAD units; I use the German localized QCAD and entered 25,4 into the box with the wrong result, i.e. the same as 25; Entering 25.4 got me what I wanted: The question box needs the point and ignores the comma. Would be nice if it could use the localized separator.

1223QCAD (main)Bug ReportVery LowText: formatting with subscript and font sizeAssigned
Task Description

- enter the text A1 and format the “1” as subscript and with a different font size.
When you click OK, it will be something like: AH3.571431;
I have to manually edit it (source tab) to AH3.57143;S^1;

1214QCAD (main)Bug ReportLowArray of blocks -> Clipboard -> "flip pasted entities" ...Assigned
1 Task Description


Select a block array,
put it with “Copy with reference” or “Cut with reference” into the clipboard,
choose a reference point which isn’t in the center of the array,
use the paste tool / with option “flip pasted entities”

If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point.
If I try to flip in both directions at the same time - you can’t see this effect.

1203dxflibBug ReportLowImages not saved (dxflib)Assigned
Task Description

I am doing a bit of landscaping and using a (big) ortophoto as one of my layers in order to sanity-check on the ground measurements.

The layer contains a point and the image and nothing else.

The image is a 8MB file: “PNG image data, 4200 x 2980, 8-bit/color RGB, non-interlaced” and it is scaled to 210 coordinate units (meter) horizontally in the drawing.

With approx 50% probability the image disappears during Save, as see for instance in this diff of the DXF file:

      @@ -158699,28 +153057,6 @@ AcDbXrecord
      -  5
      - 90
      -  1
      - 10
      - 20
      - 11
      - 21
      -  0

The point in the same layer does not similarly disappear, the bug only seems to affect images.

I have seen this bug from version to git as of yesterday (63e06c778926a803bdfbffdf27b8c24d41511072).

I have not been able to correlate the bug with anything.

Looking closer at the DXF file (attached), there seems to be some residuce of attempts to insert images in protected/invisible layers, so this may be some kind of refcounting issue.

(Any chance of getting FreeBSD into the “Operating System” field ?)

1180dxflibBug ReportLowdxflib cannot open files with international characters ...Assigned
3 Task Description

With dxflib, QCAD cannot open any file with Chinese file name or path name, it popups a “Important Error” dialog.
But the writing (”Save As” command) with Chinese file name or path name is of no problem.
Does it mean dxflib can only handle single byte characters file name/path name?
WinXP, QCAD 3.8.0

1087QCAD (main)Bug ReportLowRuler ticks are not corresponding to the grid pointsAssigned
Task Description

Ruler ticks are not corresponding to the grid points,
Ruler will completely disappear at a certain zoom level,

Drawing unit: inch,
Grid settings: Grid 1, Meta Grid 12,
Dim Label Format: “Engineering, 0’-0.0”

see topic below:

1042QCAD (main)Bug ReportVery LowPreferences dialogs: help button shown in dialog headerAssigned
Task Description


1008QCAD (main)Bug ReportLowDXF (dxflib) compat issuesAssigned
Task Description

Git head as well as 3.4.5 (trial), both with dxflib

Start up QCAD, (with existing or new configuration, doesn’t seem to matter), “Save as” the completely empty drawing, choose “R15 (dxflib)” on Pro (only this one is available on community), save drawing.

Fire up AutoCAD 2000, try to load the empty drawing just saved.


DXF read error
Error in APPID Table
DXF read error on line 941.
Invalid or incomplete DXF input -- drawing discarded.

Problem not present when a completely empty drawing saved using Teigha in R15 format is opened (ie. it just results in an empty drawing in AutoCAD 2000). Problem is also not present when saving an existing drawing with Pro (trial) with Teigha and opening it in AutoCAD 2000. Problem does present when trying to open a dxflib-saved drawing in AutoCAD 2000.

Empty drawings created with both dxflib in QCAD Pro 3.4.5 trial and Teigha whatever in QCAD Pro trial 3.4.5 are attached. (Community Git 135fd0 is identical to Pro - same dxflib version.)

980QCAD (main)Bug ReportLowIsometric Projection / blocks / wrong layer are used in...Assigned
Task Description

Isometric Projection used on a selection which contains blocks will mix up the layer affiliations.
No blocks - no problems ;-)

976dxflibBug ReportLowDXF import errors related to hatches, textsAssigned
Task Description


948QCAD (main)Bug ReportLowmainwindow example segfaultsAssigned
Task Description

As far as I can tell, it never worked.

#0  0x0000000000490527 in QFormInternal::domPropertyToVariant ()
No symbol table info available.
#1  0x000000000042aea9 in QFormInternal::QAbstractFormBuilder::toVariant ()
No symbol table info available.
#2  0x00000000004498a6 in QFormInternal::QFormBuilder::applyProperties ()
No symbol table info available.
#3  0x000000000042475f in QFormInternal::FormBuilderPrivate::applyProperties ()
No symbol table info available.
#4  0x000000000042e83b in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#5  0x00000000004493c0 in QFormInternal::QFormBuilder::create ()
No symbol table info available.
#6  0x000000000042182e in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#7  0x000000000042fa37 in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#8  0x00000000004225a2 in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#9  0x0000000815eed3d7 in QFormInternal::QAbstractFormBuilder::load ()
   from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#10 0x0000000815ededad in QUiLoader::load () from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#11 0x0000000815eda326 in qtscript_QUiLoader_prototype_call (context=0x813262240)
    at ../../generated_cpp/com_trolltech_qt_uitools/qtscript_QUiLoader.cpp:282
        _q_arg0 = (QIODevice *) 0x813fe5610
        _q_arg1 = (QWidget *) 0x813ffdcd0
        _q_result = (QWidget *) 0x8006e2c00
        _id = <value optimized out>
        _q_self = (QUiLoader *) 0x813f08d40
#12 0x0000000805fc9f78 in QScript::FunctionWrapper::proxyCall () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#13 0x0000000805ee418f in QTJSC::NativeFuncWrapper::operator() () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#14 0x0000000805eb93ee in QTJSC::Interpreter::privateExecute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#15 0x0000000805ec1ccd in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#16 0x0000000805ec1ff9 in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#17 0x0000000805fa9743 in QScriptEnginePrivate::evaluateHelper () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#18 0x0000000805faabc6 in QScriptEngine::evaluate () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#19 0x0000000800ac5aae in RScriptHandlerEcma::eval (this=0x811f435e0, script=<value optimized out>, 
    fileName=<value optimized out>) at RScriptHandlerEcma.cpp:855
        err = {d_ptr = {d = 0x7fffffffcf50}}
#20 0x0000000800ac65c5 in RScriptHandlerEcma::doScript (this=0x811f435e0, scriptFile=@0x7fffffffd2f0, 
    arguments=<value optimized out>) at RScriptHandlerEcma.cpp:851
        fi = {d_ptr = {d = 0x813f94700}}
        globalObject = {d_ptr = {d = 0x813ff1240}}
        contents = {static null = {<No data fields>}, static shared_null = {ref = {_q_value = 3936}, alloc = 0, size = 0, 
    data = 0x809bb387a, clean = 0, simpletext = 0, righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}}, 
  static shared_empty = {ref = {_q_value = 19}, alloc = 0, size = 0, data = 0x809bb389a, clean = 0, simpletext = 0, 
    righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}}, d = 0x811c11800, static codecForCStrings = 0x0}
#21 0x0000000000417d13 in MainWindow (this=0x7fffffffd4b0, parent=<value optimized out>) at MainWindow.cpp:99
No locals.
#22 0x0000000000416ad9 in main (argc=1, argv=<value optimized out>) at main.cpp:35
        app = <value optimized out>
        window = {<QMainWindow> = {<QWidget> = {<QObject> = {_vptr$QObject = 0x4992b0, static staticMetaObject = {d = {
            superdata = 0x0, stringdata = 0x809933ae0 "QObject", data = 0x809933b80, extradata = 0x809ba94c0}}, 
        static staticMetaObjectExtraData = {objects = 0x0, 
          static_metacall = 0x80985cd80 <QObject::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}, d_ptr = {
          d = 0x811d28600}, static staticQtMetaObject = {d = {superdata = 0x0, stringdata = 0x80993cc40 "Qt", 
            data = 0x809940560, extradata = 0x0}}}, <QPaintDevice> = {_vptr$QPaintDevice = 0x499478, painters = 0}, 
      static staticMetaObject = {d = {superdata = 0x809ba94e0, stringdata = 0x808e66be0 "QWidget", data = 0x808e670c0, 
          extradata = 0x809282360}}, static staticMetaObjectExtraData = {objects = 0x0, 
        static_metacall = 0x8087899a0 <QWidget::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}, 
      data = 0x811d28748}, static staticMetaObject = {d = {superdata = 0x809282380, stringdata = 0x808ec04c0 "QMainWindow", 
        data = 0x808ec0660, extradata = 0x8092abc60}}, static staticMetaObjectExtraData = {objects = 0x8092d1880, 
      static_metacall = 0x808e5aaf0 <QMainWindow::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}}, 
  documentInterface = 0x811d31600}
        ret = <value optimized out>
893QCAD (main)Bug ReportLowLibrary Browser - Edit Library Item - opens drawings al...Assigned
Task Description

Library Browser - Edit Library Item - opens drawings always with grid.

- If I switch between opened drawings back and forth the grid will disappear ....
- If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....

Just Cosmetic ... ;-)

879QCAD (main)Bug ReportLowAutosave function not working if file is opened directl...Assigned
Task Description

If a file is opened by clicking on it in an open ZIP archive, autosave will not work.

Linux Mint -64

Autosave function not working, error warning given instead!

864QCAD (main)Bug ReportLowTemplate Preview/Info doesn't shows the sheet orientati...Assigned
Task Description

“Create New Drawing from Template” Browser can’t readout the Page orientation ...

794QCAD (main)Bug ReportLowApplying Solid grid lines - not workingAssigned
Task Description

Application preferences > Graphics View > Appearance - Solid grid lines doesn’t change anything?

772QCAD (main)Bug ReportLowIsometric grid: toggle buttons not updatedAssigned
Task Description

- Switch isometric grid off
- Switch isometric grid on using drawing preferences
- Tool buttons don’t reflect correct status

756QCAD (main)Bug ReportLowDisplay problem in the Text "Character Map" ...Assigned
1 Task Description


Go to:
Text → Special Characters → Others → “Character Map” pops up.
Adjust Zoom to 100% = display problem (not enough space for the single character.

754QCAD (main)Bug ReportLowAdding or removing additional viewports - gives unwante...Assigned
Task Description

Windows 7-64
When adding or removing additional viewports,an extra unnecessary window of the viewport is created.

753QCAD (main)Bug ReportLowPaste Preview confusing ....Assigned
Task Description

If I paste something from the clipboard to a drawing the scales of dims are wrong in the preview.

It is difficult to place it right with a confusing preview of that what I have to place ... ;-)

736QCAD (main)Bug ReportLowsnap tool menu is shown before specifiv tool menuAssigned
Task Description

When creating a new file, selecting the e. g. line tool at first opens the linemenu and the snap tool menu as expected. After clicking on the back button twice (going back to the main menu) and selecting the e. g. circle menu, the snap tool menu is shown instead of the circle menu. Instead the circle menu is shown after pressing the back button again.

This only happens when clicking on the back button, but with any tool menu seleected. Pressing escape to go back does not show this problem.

QCAD is running on Mac OS Mountain Lion.

735QCAD (main)Bug ReportLowAngle dimensioningAssigned
Task Description

See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread

733QCAD (main)Bug ReportLowQCAD Trial: batch tool dwg2bmp produces no outputAssigned
Task Description

Some users are experiencing problems with dwg2bmp.

See forum at:

729QCAD (main)Bug ReportLowPreferences not stored on some installationsAssigned
Task Description

Preferences not stored on some installations


721QCAD (main)Bug ReportLowVertical dimensions imported as horizontal dimensionsAssigned
Task Description

Vertical dimensions created with 3rd party applications are sometimes imported as horizontal dimensions with length 0. Changing the angle in the property editor fixes the problem.
Problem occurs in QCAD 2.2 and QCAD 3.0.

714QCAD (main)Bug ReportLowIsometric view tool bar doesn`t remain ' docked'.Assigned
Task Description

Win 7 - 64
Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.

705QCAD (main)Bug ReportLowVerwaltung Library Resourcen und Favoriten ....Assigned
Task Description

Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....

Hier meine Gedanken ....

In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.

Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.

Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX ;-) Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.

Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!

OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”:
QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!

Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.

700QCAD (main)Bug ReportLowSaved 'hatched' block loses hatching when using isometr...Assigned
Task Description

Hatched block loses hatching when using isometric projection tool:
See -http://www.qcad.org/rsforum/viewtopic.php?f=32&p=7063#p7063

When manipulating a saved hatched block with the isometric tool it loses the hatching unless the block is exploded.

Is this normal behaviour here? or a bug?

689QCAD (main)Bug ReportLowGrid spacing info not shownAssigned
Task Description

OpenSuSE 12.2: the grid info display is not displayed:

665QCAD (main)Bug ReportLowPossible printing error on Linux fedora 16?Assigned
Task Description

On behalf of et76
Possible printing error using Linux 16 - needs further testing!
Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

Au nom de et76
Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests!
S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

645QCAD (main)Bug ReportLowInch - Layerdata / Linewight still in mm ...Assigned
Task Description

Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....

I like it ;-) ... but maybe I’m the only one :-(

641QCAD (main)Bug ReportLowNo warning is displayed when lengthen tool is used with...Assigned
Task Description

Command ‘Lengthen LE’ will extend most arcs but not all (2 arcs in the attached drawing do not work)! There is no obvious reason for this from the users point of view.

585QCAD (main)Bug ReportLowCopy & Paste Vorschau Proportionen passen nicht ...Assigned
Task Description

Kopiere ich Bemaßungen/Leader in die Zwischenablage und möchte diese dann wieder in die Zeichnung einfügen passen die Vorschau Proportionen nicht mit dem eingefügten Ergebnis überein. Eigentlich nur ein Schönheitsfehler aber es erschwert die korrekte Positionierung und die benutzung der Optionen wie skalieren, rotieren etc ...

Showing tasks 1 - 50 of 361 Page 1 of 81 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts


Task Details

Task Editing