QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

ID  descCategoryTask TypeSeveritySummaryStatusProgress
 1272 QCAD (main)Bug ReportLow Modify > Auto Trim: not undoable when used on spline Closed
100%
Task Description

Scenario 1:
like to use “Breakout segment” on a spline,
Status bar tells me that I CAN use this tool on a spline,
Breakout: works,
Undo: works,
Everything fine ...

Scenario 2:
like to use “Breakout manual” on a spline,
Status bar tells me NOT to use this tool on a spline but ...
Breakout manual: works,
Undo: works,
I think just the status bar needs an Infotext update.

Scenario 3:
like to use “Auto Trim” on a spline,
Status bar tells me NOT to use this tool on a spline but ...
Auto Trim: works,
Undo: works NOT,
I think the status bar needs an Infotext update and I guess in the undo function is a bug.

 1267 QCAD (main)Bug ReportLow Options for Print Preview not correct working Closed
100%
Task Description

Please double check the functionality of the Print options - I think that there are not correct working.

Move Paper position = OK,
Autofit drawing to paper = out of center, wrong scale
Autofit pages to drawing = to many pages are used,
Auto center = out of center,

1262QCAD (main)Feature RequestLowMissing some kind of "QCAD is still working" indicator.Assigned
0%
Task Description

If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...

It would be nice to have some kind of visual info that QCAD is working.

 1260 QCAD (main)Bug ReportLow "Break out segment" again arc is not a sharp cut to the ...Closed
100%
Task Description

Break out segment / Auto trim again arc is not a sharp cut to the arc (to long or to short),
Break out manual can’t snap to a line/arc intersection,

 1251 QCAD (main)Bug ReportLow QCAD CE can't read ä,ö ü in a file name Closed
100%
Task Description

The QCAD Community Edition isn’t able to read / import dxf files with a German “Umlaut” like ä,ö, ü in the dxf file name.
If I change the file name from a “ä” into a “ae” QCAD CE will open the file flawless.

 1245 QCAD (main)Bug ReportLow Zoom in / zoom out: drawing painted at inconsistent off ...Closed
100%
Task Description

Zooming in or out repeatedly (keeping + or - key pressed or using mouse wheel) shows the drawing at incorrect offsets in between frames with the correct offset.

Original report:

Zoom in and out with the Mouse wheel is working but it is unfortunately jumping in a zickzack course.

 1222 QCAD (main)Bug ReportLow Selection Filter / Line / Angle in radians Closed
100%
Task Description

If I try to use the Selection Filter to find Lines regarding to the used Angle it fails in many cases.

In my test drawing you can see that I’m able to select Lines with an 0° Angle but I’m not able to select any of the other lines with e.g. an 45° / 90° 180° or 315° etc. angle.

 1217 QCAD (main)Bug ReportHigh Modify > Explode: crash for non-explodable entities Closed
100%
Task Description

- Select line
- Modify > Explode

1214QCAD (main)Bug ReportLowArray of blocks -> Clipboard -> "flip pasted entities" ...Assigned
0%
1 Task Description

Case:

Select a block array,
put it with “Copy with reference” or “Cut with reference” into the clipboard,
choose a reference point which isn’t in the center of the array,
use the paste tool / with option “flip pasted entities”

If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point.
If I try to flip in both directions at the same time - you can’t see this effect.

 1202 QCAD (main)Bug ReportLow Defaults - New drawing - Printing colors setting shows  ...Closed
100%
Task Description

Default settings (Application preferences) for “Printing colors” shows no effect on a “Grayscale” or a “Black and white” setting.
Regardless the setting a new drawing is always presented with a “Full color” adjustment.

 1191 QCAD (main)Bug ReportVery Low Toolbar: Unnecessary or double divider Closed
100%
Task Description

Yes - it is only cosmetic but it is also stealing space in the Toolbar.

Would be nice to have them removed. ;-)

 1188 TranslationBug ReportLow A few missing translations for the German Interface Closed
100%
Task Description

“Paste Along Entity”

- Menü/Bearbeiten,
- Applikationseinstellungen/Werkzeugeinstellungen,
- QCAD Benutzerreferenz/Bearbeiten,
- Werkzeugleisten/Symbol, Alt text,

“Recent files history size” Applikationseinstellungen/Zuletzt geöffnete Dateien

“Default lineweight for new layers” Applikationseinstellungen/Layer/Layer hinzufügen

“Hide internal blocks” Applikationseinstellungen/Widgets/Blockliste

1187QCAD (main)Feature RequestLowScale possibility for Info tools ...Assigned
0%
2 Task Description

Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”.
It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.

 1186 QCAD (main)Bug ReportLow Snap > Intersection manual: not working for polyline se ...Closed
100%
Task Description

Snap to “Intersection manual” is only working in dependency on Line/Polyline orientation.

Two Polylines (not each other crossing): doesn’t works.

One Line, one Polyline (not each other crossing) works only in dependency on entity orientation.

1170QCAD (main)Feature RequestLowMore options for "Paste along entity"Assigned
0%
1 Task Description

The new tool “Paste along entity” is very useful! But I work mostly in mechanical engineering and would like to see more options to determine where it has to start with the first insert item.

Screenshot:

1. That is how it works right now - no chance to get it started on both ends of an line.

2. If I need to have my items also on the ends I have to use additional the normal “Paste” function.

3. If I could tell the “Paste along entity” that there is a start and end “Base” dimension then I’m a big step further. ;-)

I could tell the tool that it has to start at “0” or at “25” and the rest is just regarding the calculation. Correct?

However - you need many times in mechanical engineering etc. a hole pattern which will start at:

0,25,25,25,25,25,25,25,25,0

or

25, 123.5, 123.5, 123.5, 123.5, 123.5, 25

It would be very nice to have this also in combination with the “Paste along entity” tool ;-)

 1151 QCAD (main)Bug ReportLow Modify > Chamfer / Round: broken between first and last ...Closed
100%
2 Task Description

At closed Polygons: Chamfer / Bevel / Round tools are not proper working at the Start/End corner transition.

see also: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3192&p=11358#p11358

 1150 QCAD (main)Bug ReportLow Snap to dimension reference points Closed
100%
Task Description

... except reference points I can’t anymore snap to any line on a Dimension. To make a proper alignment I need to use the Grid or other entities.

 1148 TranslationBug ReportLow Äquidistante: "Polyline" instead of "Polzlinie" Closed
100%
Task Description

Äquidistante:
Spelling correction: “Polyline” instead of “Polzlinie” ... ;-)

 1147 QCAD (main)Bug ReportLow View > Zoom to selection with only vertical / horizonta ...Closed
100%
1 Task Description

“Zoom to selection” shows no effect on vertical and horizontal lines: Message: “No selection found”.

Recognizable at:
vertical lines, horizontal lines,
Rectangle, Rectangle with size,
Polygon Center Point, Polygon two corner (only in the case that you have vertical/horizontal lines),

Shapes as a polyline - no problem. ;-)

 1136 TranslationBug ReportLow Selection filter: property list not translated Closed
100%
Task Description

QCAD Pro / Deutsch

Selektionsfilter:
Eigenschaft / Auswahlliste wird nicht in Deutsch angezeigt.

 1125 QCAD (main)Feature RequestLow Property Editor / Total angle of an arc Closed
100%
1 Task Description

Hi,

if I have an arc and use the Property Editor to get the Geometrical information I always miss the total angle of the arc.

Yes - I have the Start and the End angle but to get the Total angle I have to draw construction lines to be able to use the Angular Dim or Info angle tool /or I need to use a pocket calculator ...

It would be nice to have this calculated by QCAD - I assume it can’t be that difficult to design an extra field which will display, based on the start and end angle, the total angle of an arc.

What do you think?

 1119 QCAD (main)TaskLow Improve presentation of linetype names in combobox Closed
100%
1 Task Description

The Linetype Names in the pull-down menu for Layer are hardly readable - it seams to me that the description is used twice (in different ways) in each row.
Till 3.6.4 the Information was short and clear.

1102QCAD (main)Feature RequestLowRay reference pointAssigned
0%
1 Task Description

Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.

It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.

 1095 QCAD (main)Bug ReportLow Isometric projection: Projection uses application prefe ...Closed
100%
Task Description

QCAD start,
Application Preferences:
Units: inch
Dim: Fractions

Changed the Drawing Preferences to:
Units: mm
Dim: Decimal

Design a Dim and it will be created with the mm/Deci settings - as expected,

Select now the Dim - activate the ISO Tool - the try to determine the reference point fails / it’s way of the clicked point and now the produced ISO Projection will use the attributes for DIM’s from the “Application Preferences” setting - hmmmmmmm, not as expected :-(

1087QCAD (main)Bug ReportLowRuler ticks are not corresponding to the grid pointsAssigned
0%
Task Description

Ruler ticks are not corresponding to the grid points,
Ruler will completely disappear at a certain zoom level,

Settings:
Drawing unit: inch,
Grid settings: Grid 1, Meta Grid 12,
Dim Label Format: “Engineering, 0’-0.0”

see topic below:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014

 1086 DocumentationBug ReportLow Spline corner control responding to multiple mouse clic ...Closed
100%
Task Description

I can’t find any documentation (Reference Manual / Book) about the possibility to change the “corner” transition shape for Spline’s (Control Points) with multiple mouse clicks.
1, 2 or 3 clicks = smooth to sharp corner.

 1085 QCAD (main)Bug ReportLow Edit > Cut/Copy with Reference: cannot use snap to coor ...Closed
100%
Task Description

If I use the Copy/Cut with Reference Clipboard function I can’t use the “Coordinate” or “Polar coordinate” snap to determine the reference point.
I have the feeling that just the option box isn’t shown ....

 1084 QCAD (main)Bug ReportLow Isometric projection: layers disappear from layer list Closed
100%
Task Description

see below:

http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3009

 1081 QCAD (main)Bug ReportLow Modify > Explode: Fails for dimension entities Closed
100%
Task Description

Exploding a usual block - no problems.
Exploding a dimension - it will freeze the explode tool until I reset the tool or use another tool. New drawing / old drawing doesn’t matter.

 1077 QCAD (main)Bug ReportLow Centreline Cross using wrong Coordinate Format Closed
100%
Task Description

My Coordinate Format/Decimal Point is adjusted to Dot’.’ but the “Centreline Cross (C,S)” will only accept Comma for Angel. X/Y works fine!

BTW: Is the spelling correct in the Menu? Should it be spelled “Centerline Cross” instead of “Centreline Cross” ...?

 1058 TranslationBug ReportLow Benutzerreferenz, anstatt skaliert wurde rotiert verwen ...Closed
100%
Task Description

In der Benutzerreferenz für Skalieren wurde irrtümlich das Wort “rotiert” anstatt “skaliert” verwendet

 1057 TranslationTaskLow Japanese translation missing in a couple spots .... Closed
100%
Task Description

Is the Japanese translation still in progress or is this a update Problem?

1051QCAD (main)Feature RequestLowInfo tool, polygonal area, possibility for a postfix la...Assigned
0%
1 Task Description

... would be nice.

If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².

I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ... ;-)

1044QCAD (main)Feature RequestLowRadian measure symbol for Geometry labeling ...Assigned
0%
1 Task Description

We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...

It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.

 1028 QCAD (main)Bug ReportLow Draw > Line > Rectangle with Size: options toolbar layo ...Closed
100%
Task Description

... just cosmetic!

Rectangle with size: The option box “Reference Point” is a bit to small to show the whole text of the chosen option.

English / German = same behavior.

1027QCAD (main)Feature RequestLowRectangle with a 3 point determination ...Assigned
0%
2 Task Description

Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.

We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.

My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.

1. First point: start

2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle

3. third point: determination second side (height?)

I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...

1026QCAD (main)Feature RequestLowSelection Filter also present in the Menu "Selection"Assigned
0%
Task Description

It would be nice to have the Selection Filter also present in the Menu / Selection List

 1025 TranslationBug ReportLow Selection Filter / German translation Closed
100%
Task Description

The German translation isn’t shown in all parts of the Selection Filter.

 1020 QCAD (main)Bug ReportLow Line2PEx, Option-bar for angles disregard the Decimal P ...Closed
100%
Task Description

My QCAD setting for “Decimal Points” is “dot” instead of “comma”.
(Application Preferences, General, Coordinate Format, Decimal Point: Dot ‘.’(Default))

The new Line2PEx tool will only accept a comma - if I use a dot it will be automatically replaced by a comma.
The displayed angle in the drawing will use a dot.
No red Text font warning for using an invalid value.

I used a screen-shot with an additional coordinate option to make it a bit clearer:

 996 QCAD (main)Bug ReportLow Can't scale controlled "Rich Text" multi Lines ... Closed
100%
Task Description

If I have multi lines with different heights in a Rich Text the scale tool works not at all or the scale factor works different on each lines.

This example is scaled with factor 2. First line works - second line keeps the proportions.

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

990QCAD (main)Feature RequestLowDefault Names for Custom Property ...Assigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

It would be nice to have in “Application preferences” the possibility to predefine a couple Custom Property Names.
Right now I use the Custom Property function to add a DIN and the Material info to every Block. This project has a lot of DIN parts and I have to type again and again the names DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... you got my point ;-)

If I have predefined Names - I have just to fill out the value :-)

 981 QCAD (main)Feature RequestLow New tool: Ellipse - Equidistant Closed
100%
1 Task Description

Bug or Feature request?

Tool “Parallel” is not working on an intact ellipse. If I explode the ellipse it will work but then it turns out to a Sisyphus task ... ;-)

980QCAD (main)Bug ReportLowIsometric Projection / blocks / wrong layer are used in...Assigned
0%
Task Description

Isometric Projection used on a selection which contains blocks will mix up the layer affiliations.
No blocks - no problems ;-)

 975 QCAD (main)Feature RequestLow Search/Replace accomplished info ... Closed
100%
Task Description

It would be nice to get a status information after the use of the “Search/Replace” tool.

Something like: “5 matches found and replaced”,
or
no “matches found”.

It helps allot to get an Idea what happens in your drawing. Right now the tool window will just disappear and you have no idea about any success.

972QCAD (main)Feature RequestLowDistribute equally option ...Assigned
0%
4 Task Description

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

 963 QCAD (main)Bug ReportLow Clip to rectangle / clear area on block references Closed
100%
Task Description

“Clip to rectangle / clear area” in combination with a Block will explode the Block and change all line attributes for the exploded ex-block.

Pics: Before / after using the tool.

951QCAD (main)Feature RequestLowExtra Option for Block attributes ...Assigned
0%
Task Description

It would be nice to have the possibility to control the automatic Text orientation in Block attributes.
Something what would work like the DIM restriction: I can read the text horizontal and/or from the right side of the drawing sheet.

Right now I have the feeling that the Text orientation is dependent on the tool what I even use.
Different tools = different outcomes.

 945 QCAD (main)Feature RequestLow Stretch tool for blocks ... Closed
100%
Task Description

It would be nice if we could use the Stretch tool also on blocks.

There are so many possibility’s to build a really good (time-saving) block-list /library with preassembled parts but if I have always to explode / ruin the block to use the stretch tool doesn’t helps the productivity.

 937 QCAD (main)Bug ReportLow Info Tools - Area: "Add measurement to drawing" doesn't ...Closed
100%
Task Description

XP/32

Info Tools - Area: “Add measurement to drawing” doesn’t work as expected

Showing tasks 51 - 100 of 206 Page 2 of 5 - 1 - 2 - 3 - 4 - 5 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing