QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
2531QCAD (main)Feature RequestLowAn always-visible hotkey overlay option would be extrem...Assigned
0%
Task Description

Hello! This is perhaps the most useful and valuable of the suggestion ideas I’ve had for QCAD so far!

I think it would be extremely useful if there was an option within the QCAD preferences for making it so that the hotkeys currently bound to each tool button in the UI (if existent) are always displayed such that they are overlaid on top of each of the buttons. There are two main approaches I can think of for doing that (both intended to avoid disturbing the existing layout of the UI):

  1. Display the current hotkey binding associated by drawing it (probably in a distinct color) on one of the edges or corners of each of the buttons (such as the bottom middle side, the lower left corner, or the lower right corner). Even at a small font size I think this would be very effective and useful.
  2. Instead of making the overlaid hotkey display in a small font at a side or corner of each button, you could have the hotkey text be in a large font and overlaid on top of the entire button, using things such as transparency and a distinctive (never used in the other parts of the UI) color to ensure that the button icons is still readable. A broader width of the font stroke may also help if transparency is used, so that the underlying icon lines remain more readable.

Both approaches have pros and cons. I personally lean towards the former, but Husky and CVH seemed to take issue with the readability of small fonts and so I later suggested the later option too.

They seemed opposed to both (at least during the forum discussion). However, I think this UI feature could be one of the best workflow speed improvements for the average user (many/most of whom probably don’t have time to memorize the hotkeys or just don’t end up doing so) of QCAD!

The gains in efficiency and pleasantness could be enormous potentially, even despite it QCAD already being among the most pleasant and well-designed programs I’ve ever used!

It is far faster to be able to instantly read a hotkey from the UI than to have to wait for a tooltip or to look the keystrokes up in the documentation.

Memorization is the fastest of course, but as someone who finds themselves constantly spread thin over many different programs (often half a dozen or more) for long spans of time I often find it difficult to remember all of the hotkeys for each program I use. Having such hotkeys always visible is useful for users who are spread thin, as many people increasingly in the world of software.

CVH suggested that I make custom icons myself, but doing so seems far worse than simply having QCAD automatically read and then print out the corresponding hotkeys over every tool in a programmatic and properly automated way.

I seriously think this would be one of the most awesome improvement you could ever add to QCAD!

Indeed, there is no missing feature I want more than this one!

Few programs do this but the few cases I’ve seen it the feature was extremely useful for speed without having to take weeks/months/years to fully memorize hotkeys only then forget them later. This idea eliminates that problem!

It would be glorious from a usability and accessibility standpoint! Please implement it!

Hopefully Qt’s GUI system is flexible enough to draw overlaid text over the buttons like this without to much hassle. That is the main potential impediment as I see it.

Anyway though, here is the associated forum discussion where I mentioned this idea. It was the same thread as the one where I also suggested adding a way to control tooltip delays.

735QCAD (main)Bug ReportLowAngle dimensioningAssigned
0%
1 Task Description

See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread

1789QCAD (main)SuggestionLowApplication Preferences / General / Performance :0Assigned
0%
1 Task Description

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

794QCAD (main)Bug ReportLowApplying Solid grid lines - not workingAssigned
50%
1 Task Description

Windows
3.0.8
Application preferences > Graphics View > Appearance - Solid grid lines doesn’t change anything?

1472QCAD (main)Feature RequestLowArc fit tool to improve large filesAssigned
0%
1 Task Description

Large files/large entities perform bad in QCad. There are many dxf files that are created with thousand of lines that perform reasonable in other cad’s/cam’s that qcad cannot match.

One very useful tool, that could be added would help to improve qcad performance and at the same time enlarge the dxf quality (by replacing thousand of files by arcs), would be a tool called “arc fit” where, when possible and under a determined possible error margin (user selectable) creates arcs replacing the existing lines.
This would improve the file work in QCad also improves CAM software that would work after QCad, that I think is important for many users.

For example, if it is needed to use qcad to generate toolpaths for letters, after exploding letters, the output is almost impossible to work due to the number of lines that are created. Having arcs instead of lines would greatly improve qcad use.

895QCAD (main)Feature RequestLowArea calculation based on existing entitiesAssigned
0%
4 Task Description

Use case:

  • Start tool
  • Choose one entity of the contour
  • If contour is closed, area of closed contour is calculated an printed in the command line history
  • Configuration parameters: segment length for arc interpolation
1023QCAD (main)Feature RequestLowArrange points on a plan according to variation of dist...Assigned
0%
2 Task Description

Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances

1214QCAD (main)Bug ReportLowArray of blocks -> Clipboard -> "flip pasted entities" ...Assigned
0%
1 Task Description

Case:

Select a block array,
put it with “Copy with reference” or “Cut with reference” into the clipboard,
choose a reference point which isn’t in the center of the array,
use the paste tool / with option “flip pasted entities”

If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point.
If I try to flip in both directions at the same time - you can’t see this effect.

554QCAD (main)Feature RequestLowAuswahlbox sollte auch mit der Shift Taste Bereiche dem...Assigned
0%
Task Description

Ziehe ich mit der Maus eine normale Auswahlbox kann ich Elemente markieren.
Möchte ich einzelne Bereiche wieder herausnehmen muss ich alle Elemente einzeln anklicken (mit gedrückter Shift Taste).
Ich kann zwar dies komfortabler gestalten mit der Select → (De -) Select Contour Funktion welche aber erst über das Menue aufgerufen werden muss.

So wie ich einzelne Elemente mit der Maus auswählen und mit der Shift-Maus Funktion deselektieren kann wäre es schön wenn die Shift Taste auch bei Auswahlbereichen direkt zum deselektieren eingesetzt werden könnte.

2294QCAD (main)Feature RequestLowAuto Zoom with middle mouse buttonAssigned
0%
Task Description

I tried to assign double click on middle-mouse button to zoomauto command, but it seems it’s not possible currently.

Would love to see this feature.

1681QCAD (main)Feature RequestLowAuto-dimensioningAssigned
0%
Task Description

You can apply the command to Lines, PolyLine segments, Arcs, Circles, and Rings:

For linear entities parallel to an axis of the coordinate system, aligned Dimensions (parallel Dimensions) are created. For linear entities not parallel to an axis of the coordinate system, either aligned Dimensions (measuring the absolute distance between two points) or horizontal or vertical Dimensions (measuring the horizontal or vertical distance between two points) depending on where you move the pointer are created.

For curved entities, you can create radial, diameter, linear, angular, and arc length Dimensions.

To dimension entities:

Click Dimension > Auto (or type AutoDimension).
In the graphics area, select an entity to dimension.
Click to place the dimension line.
To use another dimension type for Circles or Arcs, specify an option:
Diameter. Creates a diameter Dimension.
Radial. Creates a radial Dimension for an Arc or Circle.
Linear. Creates a linear Dimension of the diameter of a Circle or an aligned, horizontal, or vertical Dimension between the end points of an Arc.
Angular. Dimensions the angle between the end points of an Arc.
Arc length. Dimensions an Arc length.
Note: The chosen option is the default the next time you use the AutoDimension command.

When you move the pointer during a linear dimensioning, you can:
Lock. Determines the current dimension type (aligned, horizontal, or vertical) regardless where you move the pointer.
Unlock. Unlocks the type of linear dimension used.
Press Enter.

***
In short, when you use this tool you click on an entity and it will know what dimension you’re looking for. For Circles, you can specify in the command window R or D for Radius or Diameter.
This would be extremely useful on large drawings where a lot of dimensioning is to be done. One tool and start clicking on entities for dimensioning.

500QCAD (main)Feature RequestLowAutohide Side PanelAssigned
0%
1 Task Description

it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.

1917QCAD (main)Feature RequestLowAutomatic labels with static information of the drawingAssigned
0%
Task Description

I would like static information of the drawing (like scale, creation-date, modified-date, revision etc) to be available as automatic labels to be placed in the drawing (with selectable style, font etc)

This would greatly simplify the creatin of title sections in the drawing and making sure it is consistent with the actual drawing and not requiring manual “synchronization”.

1425QCAD (main)Feature RequestLowAutomatically create hatch entities behind border entit...Assigned
0%
1 Task Description

Automatically set the draw order one lower than the lowest draw order of a border entity when creating a hatch. This should be a user preference, since not everyone might want that behavior.

2416QCAD (main)Feature RequestLowAutomatically set a proper alternating row color for th...Assigned
0%
1 Task Description

Andrew,

When switching from Default to Dark mode the text on alternating rows is hardly visible.
We can customize this color.

It would be easier if a proper default color is set on switching to and back.

Perhaps the user preferences can be remembered.
Perhaps only when the contrast would be affected.

Regards,
CVH

879QCAD (main)Bug ReportLowAutosave function not working if file is opened directl...Assigned
0%
1 Task Description

If a file is opened by clicking on it in an open ZIP archive, autosave will not work.

Linux Mint -64

Autosave function not working, error warning given instead!

2063QCAD (main)Performance IssueLowBad performance while zooming inside layout block with ...Assigned
0%
2 Task Description

Zooming in and out is lagging to the point of unusable. This is happening in a layout block with the cursor pointing inside geometry with hatches. When the cursor is pointing outside the geometry zooming works as expected.
The attached file has a very simplified testcase that shows this problem almost in the same way as a more complex drawing with multiple layers and hatches.

edit: I also attached the more complex drawing because it is a bit unclear to me where the lagging stops. Outside the viewport or outside the paper.

I just noticed the selection box has the same problem!

588QCAD (main)Feature RequestLowBemaßung Prefix Dropdown mit eigenen Vorgaben erweitern...Assigned
0%
Task Description

Es wäre Arbeitserleichternd wenn ich bei den Optionen für Bemaßungen (Prefix/Postfix) eigene Präferenzen speichern könnte so das diese in allen Zeichnungen von mir verfügbar wären.
Zudem wäre es wünschenswert dieses nicht nur bei den Prefix sondern auch bei den Postfix Angaben nutzen zu können was dann alle(?) Manipulationen erschlagen würde.

Siehe auch:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1966

2242QCAD (main)SuggestionLowBill of MaterialsAssigned
0%
4 Task Description

It would be a very interesting feature to add to future versions.

I also use AutoCAD Mechanical 2012 and the BOM is synced with every balloon on the drawing. Making it easy to edit.

The core BOM accepts formula fields and we can easily calculate the mass of a part, with some Ifs and math.

The BOM that is shown in the actual drawing is more simplistic, and has just Part number, Quantity, Mass and the Description. But it’s related to the “core BOM”.

It’s a very interesting thing! It would be great on QCad.

1169QCAD (main)Feature RequestLowBitmap clippingAssigned
0%
1 Task Description

Clipping bitmaps to only show a part of the image.

See:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3263

1080QCAD (main)Feature RequestLowBitmap export: calculate size based on bounding box inc...Assigned
0%
Task Description

I have created a drawing, where the CENTERS of the most outer lines have a distance of 3.06mm in both X and Y.
The line weight of these outer lines is 0.6mm, so the whole image is 3.06mm + 2* 0.6mm/2 = 3.12mm wide and long (center to center plus half of the line weight on every side).
Additionally in the export there is a frame around the image, making it 3.12 + 2*frame.
The export function however calculates 3.06mm when setting the resolution to 1000Pix/cm, so it does not include the line weights and the outer frame.

2339QCAD (main)Feature RequestLowBlock List multible selectionAssigned
0%
Task Description

It would be nice to have the possibility to select multiple blocks with Shift and/or CTRL + mouse like the Layer List to use a delete etc command on all selected blocks at once.

614QCAD (main)Feature RequestLowBlocks - overwrite current layer yes/no ...Assigned
0%
Task Description

I would appreciate an option for the library Browser that gives me the possibility to decide by my self to use the current (same name) layer in my drawing or overwrite it with the existing layers in the library item.

Imagine the possibility’s of this feature .... ;-)

316QCAD (main)Feature RequestLowBlocks list and selected blockAssigned
0%
Task Description

Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?

(Feature request sounds a little harsh, enhancement proposal would seem more apt.)

396QCAD (main)Feature RequestLowBlocks: moving blocks: show bounding boxAssigned
0%
Task Description

Blocks: moving complex blocks with drag and drop should show bounding box as preview

1847QCAD/CAMBug ReportLowBUG MEMORYAssigned
0%
Task Description

Hi Andrew,

Still working on creating HPGL.PLT toolpaths for the HP7580 pen plotter. QCAD has some trouble creating toolpaths. Too often it shuts itself down, or the PC gets stalled.

Recreating the same error however is possible

1402QCAD (main)Feature RequestLowCAD-Toolbar, Toolbar, Menu, Tool Matrix with customized...Assigned
0%
Task Description

Would it be possible to arrange the Menu, CAD-Toolbar, Toolbar, Menu, Tool Matrix with customized keywords, like “simple”, advanced” and “expert” to show only a minimum for user there are begin with CAD, advanced for CAD-User, and expert for construction.

1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

2227QCAD (main)Feature RequestLowCAM > CAM Export: post processor for tangential knife c...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=2&t=8342

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

1838QCAD (main)Feature RequestLowCarbide Create importAssigned
0%
Task Description

Add support for importing Carbide Create files (.c2d).

Format is JSON based, human readable.

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

1255QCAD (main)Feature RequestLowChange a quote value modify the drawing + link quotes w...Assigned
0%
Task Description

Change a quote value modify the drawing + link quotes with entities

In other words, makes quotes editable AND linked to entities.

  • Today in the properties, the value is read only. Being able to edit the value would modify the linked entity properties to fit the new quote.
  • Changing a property would change the linked quotes accordingly. Today, if I change a circle diameter which is quoted, the quote remain where it was and is no more relevant.
1810QCAD (main)Feature RequestLowChange icons from black on white to white on black depe...Assigned
0%
1 Task Description

Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window.
See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970

525QCAD (main)Feature RequestLowchange the printed symbol of pointsAssigned
0%
1 Task Description

Hi,

in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature. ;-)

It would be nice if one could change this behaviour / select the symbol of points.

Best regards - Stefan

This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.

1651QCAD (main)Feature RequestLowChange thickness of arch tick for dimensioningAssigned
0%
Task Description

An option in the drawing preferences to change the line thicknesses for arch ticks would be a huge plus, at the moment I am having to insert ‘arch tick’ blocks for this.

1282QCAD (main)Feature RequestLowChangeable color of the selection bar in layer list. Assigned
0%
1 Task Description

Changeable color of the selection bar in the layer list.
Now the color of the bar is darkblue and the underlaid icons are black and are not readable.

2140QCAD (main)SuggestionLowChanging navigation mode for mouse wheel doesn't change...Assigned
0%
1 Task Description

Looks like error, but may be that’s feature request.

CAD software uses typical navigation behavior as:
Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.

Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior:
Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.

Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.

QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel.
Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!

Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.

2041QCAD (main)Bug ReportLowcircletangent2 doesn't solve correctly if the defining ...Assigned
0%
Task Description

In my example I can’t draw a circle with circletangent2 if the defining point is on one of the defining tangents. The tangency is lost when I try to do this.

I attached 4 screenshots: TheExample.png, TryingPoint1.png, TryingPoint2.png and The_Point_Isn’t_On_The_Tangents.png.

609QCAD (main)Feature RequestLowClean up toolAssigned
0%
1 Task Description

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

1452QCAD (main)Feature RequestLowColour opacity optionAssigned
0%
1 Task Description

Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?

related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715

2167QCAD/CAMBug ReportLowComma format decimal separator fails ZSafety CAM config...Assigned
0%
1 Task Description

QCAD/CAM
Trial package Win installer 32 bit
Version: 3.25.2.0 (3.25.2)
Internet: QCAD.org
Build Date: Sep 4 2020
Revision: 4a61501
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Local decimal separator is ‘,’ (comma)
In CAM configuration .. Z Levels .. Safety level

Using nn,nnn the output is Nxx G0 Znn
Using nn.nnn the output is Nxx G0 Znn.nnn

Drop down boxes are all in dot format.
Didn’t try anything else yet ;-)

Regards,
CVH

277QCAD (main)Feature RequestLowcommand line arguments: allow class name after -execAssigned
0%
Task Description

command line arguments: allow class name after -exec

873QCAD (main)Feature RequestLowcommand line does not accept distance value for funtion...Assigned
0%
Task Description

In the comnmand line, I can sucessfully enter for example the radius of a circle to draw (Space 100 Enter) but the command line does not accept a value for the distance when drawing parallel lines (l p space 100 enter → error).

648QCAD (main)Feature RequestLowConfigurable behavior for line patterns at weight 0.00Assigned
0%
Task Description

A line with linestyle = dots and line weight = 0.00 appears in model space overly spaced, all other lineweights behave as expected.
Suspect other linestyles to behave in a similar fashion.

See attached drawing.

Suggested fix: use the same scaling for lineweight 0.00 as for lineweight 0.05.

684QCAD (main)Feature RequestLowConfigurable behavior for using box selection with Shif...Assigned
0%
1 Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180

670QCAD (main)Feature RequestLowConfigurable rendering options for stacked textAssigned
0%
1 Task Description

Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript).
This may also apply to superscripts.

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

Showing tasks 51 - 100 of 519 Page 2 of 11 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing