QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  ascProgress
952QCAD (main)Feature RequestLowDimensions: manually control arrow positionAssigned
0%
3 Task Description

See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.

The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.

962QCAD (main)Feature RequestLowDefault save / open directoriesAssigned
0%
1 Task Description

Add the option to use a fixed path for the save to, open and CAM export directories.

(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)

964QCAD (main)Feature RequestLowNew tool request - 'Break Out Arc' from CircleAssigned
0%
Task Description

It would be useful to be able to pick a Start and End point of an Arc within a Circle to then break this out. So in principle another break out tool.

Please see topic:http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8826#p8826

972QCAD (main)Feature RequestLowDistribute equally option ...Assigned
0%
6 Task Description

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

979QCAD (main)Feature RequestLowText dialog: insert special characters in simple text m...Assigned
0%
1 Task Description

The Omega button to insert special characters is only available in rich text mode.
Make it available in simple text mode as well.

980QCAD (main)Bug ReportLowIsometric Projection / blocks / wrong layer are used in...Assigned
0%
Task Description

Isometric Projection used on a selection which contains blocks will mix up the layer affiliations.
No blocks - no problems ;-)

986QCAD (main)Feature RequestLowDetect duplicates - only on selected areaAssigned
0%
1 Task Description

It would be useful to have an additional option to only detect duplicates on user defined selection of drawing.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145

990QCAD (main)Feature RequestLowDefault Names for Custom Property ...Assigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

It would be nice to have in “Application preferences” the possibility to predefine a couple Custom Property Names.
Right now I use the Custom Property function to add a DIN and the Material info to every Block. This project has a lot of DIN parts and I have to type again and again the names DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... you got my point ;-)

If I have predefined Names - I have just to fill out the value :-)

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
1 Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

992QCAD (main)Feature RequestLowselections to stay selected when projecting to an isome...Assigned
0%
Task Description

My request is that all selected entities stay selected after isometric projection, this would be useful for example if you need to modify the projection further after placing!
Maybe an extra button could be added in the ISO options?

995QCAD (main)Feature RequestLowProperty editor: add 'edit block' buttonAssigned
0%
1 Task Description

Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.

1005QCAD (main)Feature RequestLowMaking use of mouse buttons configurableAssigned
0%
Task Description

According to the help, one requires a middle mouse to pan. Since few standard mice have middle buttons, this is a poor choice for this all important function. The default should be the right mouse button when ever the mouse is placed in an open area with nothing else to select. That way right click can still be used to invoke a pop down menu when ever the mouse is placed over an object that might have a need for pop down menu options. Additionally, the Pan mouse key should be alterable and selectable from a Preferences option, since if one does have a three button mouse, we should not prevent a user from employing this hardware if they have it. The same might be said for all mouse buttons to allow the user to configure the mouse operation to that which is most comfortable and efficient for their tasks.

1008QCAD (main)Bug ReportLowDXF (dxflib) compat issuesAssigned
0%
Task Description

Git head as well as 3.4.5 (trial), both with dxflib 3.3.4.0.

Start up QCAD, (with existing or new configuration, doesn’t seem to matter), “Save as” the completely empty drawing, choose “R15 (dxflib)” on Pro (only this one is available on community), save drawing.

Fire up AutoCAD 2000, try to load the empty drawing just saved.

Result:

DXF read error
Error in APPID Table
DXF read error on line 941.
Invalid or incomplete DXF input -- drawing discarded.

Problem not present when a completely empty drawing saved using Teigha in R15 format is opened (ie. it just results in an empty drawing in AutoCAD 2000). Problem is also not present when saving an existing drawing with Pro (trial) with Teigha and opening it in AutoCAD 2000. Problem does present when trying to open a dxflib-saved drawing in AutoCAD 2000.

Empty drawings created with both dxflib 3.3.4.0 in QCAD Pro 3.4.5 trial and Teigha whatever in QCAD Pro trial 3.4.5 are attached. (Community Git 135fd0 is identical to Pro - same dxflib version.)

1009QCAD (main)Feature RequestLowLayer Order is Alphabetical vs the Order Defined Origin...Assigned
0%
Task Description

It would appear that when QCAD imports a DXF, it reorders the layers into alphabetical order (at least when importing R2011). I have not tested this extensively but on other programs, the order is different from alphabetical. Ideally the operator should be given a choice to order the layers as exported (assuming the DXF format remembers that) or alphabetical. This is because a drawing may have a certain stack up of layers (like a printed circuit board) and then alphabetic ordering is not useful nor desired.

1023QCAD (main)Feature RequestLowArrange points on a plan according to variation of dist...Assigned
0%
2 Task Description

Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances

1026QCAD (main)Feature RequestLowSelection Filter also present in the Menu "Selection"Assigned
0%
Task Description

It would be nice to have the Selection Filter also present in the Menu / Selection List

1027QCAD (main)Feature RequestLowRectangle with a 3 point determination ...Assigned
0%
1 Task Description

Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.

We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.

My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.

1. First point: start

2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle

3. third point: determination second side (height?)

I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...

1034QCAD (main)Feature RequestLowSupplementary note added to Application preferences dia...Assigned
0%
Task Description

I think it would be useful to add a note to the Application preferences dialog window, to explain to the user the difference between ‘Application and Drawing’ preferences and how it effects drawings in QCAD.

Please see topic for more details and feedback:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2831&p=9724#p9724

1036QCAD (main)Feature RequestLowLayer list - drop down menu optionAssigned
0%
Task Description

In the same way as the Pen tool has a drop down menu, would it be possible to have an option to configure the layer list in the same way. I am trying to create a bit more drawing space and it would be good if I could dock the layer list in the top of my window and only take up a single row space!

1044QCAD (main)Feature RequestLowRadian measure symbol for Geometry labeling ...Assigned
0%
2 Task Description

We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...

It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.

1046QCAD (main)Feature RequestLowPlease add script bindings for Qt 4.8.6 and 5.2.1Assigned
0%
Task Description

These are the versions Ubuntu 14.04 comes with, and since it’s an LTS version, it will linger around a while.

(Despite the fact that the Qt4 packages are versioned 4.8.5, qmake –version says 4.8.6, so it doesn’t find the 4.8.5 bindings.)

Thanks,

1051QCAD (main)Feature RequestLowInfo tool, polygonal area, possibility for a postfix la...Assigned
0%
1 Task Description

... would be nice.

If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².

I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ... ;-)

1067QCAD (main)Feature RequestLowFilling an area with a bitmapAssigned
0%
1 Task Description

Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.

1080QCAD (main)Feature RequestLowBitmap export: calculate size based on bounding box inc...Assigned
0%
Task Description

I have created a drawing, where the CENTERS of the most outer lines have a distance of 3.06mm in both X and Y.
The line weight of these outer lines is 0.6mm, so the whole image is 3.06mm + 2* 0.6mm/2 = 3.12mm wide and long (center to center plus half of the line weight on every side).
Additionally in the export there is a frame around the image, making it 3.12 + 2*frame.
The export function however calculates 3.06mm when setting the resolution to 1000Pix/cm, so it does not include the line weights and the outer frame.

1087QCAD (main)Bug ReportLowRuler ticks are not corresponding to the grid pointsAssigned
0%
1 Task Description

Ruler ticks are not corresponding to the grid points,
Ruler will completely disappear at a certain zoom level,

Settings:
Drawing unit: inch,
Grid settings: Grid 1, Meta Grid 12,
Dim Label Format: “Engineering, 0’-0.0”

see topic below:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014

1090QCAD (main)Feature RequestLowExport only selected layers to SVG and/or export each l...Assigned
0%
2 Task Description

When exporting to SVG it would be helpful if there was a selection of layers to export.
E.g. when selecting only layer A in the SVG export dialog, only the objects located/displayed on layer A would be exported to SVG.

As an alternative or additional export feature, there could be an option to export each (non-empty) layer to a separate SVG in one step.
The layer names could be used as (part of the) default file names during the export.
E.g. Layer A of file XYZ would be exported to “XYZ_A.SVG” while layer B would be exported to “XYZ_B.SVG” etc.

1092QCAD (main)Feature RequestLowNew tool: draw trace entitiesAssigned
0%
2 Task Description

Add tool to construct new trace entities.
Trace entities can currently only be loaded from DXF/DWG.

1093QCAD (main)Feature RequestLowEdit Layer attributes by double-clicking on entry in la...Assigned
0%
2 Task Description

When double clicking on an entry in the layer list just nothing happens.
I would prefer if this would directly open the layer attributes dialog to change color/name etc.

1098QCAD (main)Feature RequestLowSupport for set of layersAssigned
0%
Task Description

Many constructions refer to a basis of elements, which stay constant in all follow-ups. As an example there is a floorplan and I would like to create different variations of room layout (e.g. A and B). In my example the basis consists of 30 layers an each variation needs 10 further ones. At last there are 50 different layers in my drawing. Designing layout A needs layer 1 to 30 (basis) and 31 to 40 (A) to be shown, but 41 to 50 (B) must be invisible. Now I modify Var.B which makes me to single click the visibility of 31 to 40 (A) to be not shown and 41 to 50 (B) to be shown. You’ve got it?

It would be great help, to save the set of all shown layers by an individual name in a pulldown-menu. Visibility of my variations could be chosen by userdefined “set of layers”, e.g. “Var-A”, “Var-B” and “Var-A_but_different”. In this way I pick just one set-name in my pulldown-list instead of marking and demarking between countless layers.

In my opinion this tool would be a small aspect in QCad but a giant leap for user-pleasentness ;-)

1099QCAD (main)Feature RequestLowAdd Leader with text and number bubbleAssigned
0%
4 Task Description

Having leader with numbers and text would be awesome to better interact with the drawing and making BOM lists.

Currently it takes too mush time to make the leaders with text and number bubbles.

1100QCAD (main)Feature RequestLowAdd drag dimension (snap) along dimension lineAssigned
0%
3 Task Description

In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.

This is very useful when the two lines the needs a dimension are close together, or overlapping with another.

Attached is two images one for autocad and one for Qcad

1102QCAD (main)Feature RequestLowRay reference pointAssigned
0%
2 Task Description

Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.

It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.

1104QCAD (main)Feature RequestLowPrinting: Add support for page rangeAssigned
0%
1 Task Description

When printing from the preview mode a standard Windows popup shows, letting me select the printer, number of copies and a page range. Unfortunately QCAD (or Windows) ignores the page range - it always prints all pages. So right now I always have to copy the parts I want to print, page them into a separate document and print that instead - even though I got all my stuff nicely lined up for printing on multiple pages.

1106QCAD (main)Feature RequestLowAdd support for wipeoutsAssigned
0%
3 Task Description

Wipeout entities can be used to hide rectangular or polygonal sections of a drawing, for example to make space for a label inside a hatch.

1107QCAD (main)Feature RequestLowSplines: add / remove control points of existing spline...Assigned
0%
2 Task Description

Tools to add control points to existing splines and remove control points.

1111QCAD (main)Feature RequestLowOption to swap right/middle mouse buttonAssigned
0%
Task Description

Most of the other slightly non-standard CAD/eCAD tools I work with (e.g. Diptrace, PTC Creo Elements) use the right mouse button to drag.
So when changing between these applications, it’s slightly confusing/annoying that I need the middle mouse button to drag in QCad.
Even worse, the middle mouse button on most mice is the scroll wheel which is not really comfortable to hold while dragging.

So I’d propose an option to switch the function of the middle and right mouse button to allow users to choose the preferable option.

1112QCAD (main)Feature RequestLowGradientsAssigned
0%
4 Task Description

I would very much like to ask for the option to Hatch/Fill with a gradient of one or two colours.

Many Thanks

Clive

1126QCAD (main)Feature RequestLowSuggestion for Dimension Location settingAssigned
0%
3 Task Description

Please seet topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124

1128QCAD (main)Feature RequestLowText: automatically wrap text at text box widthAssigned
50%
2 Task Description

Add support for automatic text line wrapping for multiline text entities.

1130QCAD (main)Feature RequestLowOffset Polyline from both sides at onceAssigned
0%
Task Description

It would be great to have a tick box to be able to offset a polyline from both sides/edges at once.

Maybe a similar feature could be added to the line -parallel tools?

1131QCAD (main)Feature RequestLowUse different units for construction and dimensionsAssigned
0%
2 Task Description

E.g. use Millimeters for construction while dimensions are displayed in Meters.

1133QCAD (main)Feature RequestLowView > Add View: save layer stateAssigned
0%
1 Task Description

Save layer state (visibility) with each added view object (optional?).

1152QCAD (main)Feature RequestLowAdd preference for snap label and snap cursor shape / c...Assigned
0%
1 Task Description

Would it be possible to have options for:

1.Enable or disable Snap label with text.

2.To have a ‘Snap Marker’ with style and colour choice instead of snap label.

* It would be good for users to have the choice.


1155QCAD (main)Feature RequestLowAdd preference for solid line crosshairsAssigned
0%
Task Description

Would it be possible to have the choice of either dashed or solid lines for the large cross hairs?

1156QCAD (main)Feature RequestLowAdd preference to force toolbars to be floatingAssigned
0%
1 Task Description

Would it be possible to have the choice to dock or not dock toolbars - in other words keep them floating, an additional option in the tool settings could be added?

1157QCAD (main)Feature RequestLowDimension settings - arrowhead styleAssigned
0%
3 Task Description

A ‘non -filled’ arrowhead would be good to have also.

1159QCAD (main)Feature RequestLowAdd preference for button option instead of drop down m...Assigned
0%
2 Task Description

For some tools like the Horizontal or vertical line, it would be good to have button options (similar to infinite and ray line buttons) instead of the drop down menus.

1165QCAD (main)Feature RequestLowNew Create Spiral ToolAssigned
0%
4 Task Description

A new tool to create Spirals would be great to have, with an option to restrict the decline to achieve to draw either Logarithmic or Linear styles.

Please see related topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3236

1169QCAD (main)Feature RequestLowBitmap clippingAssigned
0%
1 Task Description

Clipping bitmaps to only show a part of the image.

See:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3263

1172QCAD (main)Feature RequestLowPrint Preview - Add 'Place Paper Option' toolAssigned
0%
1 Task Description

Often in print preview I need to move the paper around and position it with the ‘Move Paper Position’ tool, which is useful, but what would be an additional extra useful option would be a ‘Place Paper Here’ tool.

Then I could simply use this tool first and then use the ‘Move Paper Position’ tool afterwards to fine tune things!

If you look at the attached image you will see that in this students file they have got their drawing spread out all over the place:(

Showing tasks 151 - 200 of 519 Page 4 of 11<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing