QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
1027QCAD (main)Feature RequestLowRectangle with a 3 point determination ...Assigned
0%
1 Task Description

Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.

We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.

My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.

1. First point: start

2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle

3. third point: determination second side (height?)

I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...

355QCAD (main)Feature RequestLowRemember function for dimension OptionAssigned
0%
Task Description

I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.

Why Remember Function:
If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.

2544QCAD (main)Feature RequestVery LowRequest to add "plain text" paste, traditionally CTRL-S...Assigned
0%
2 Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10379

Could you add “plain text paste” as ctrl-shift-V
Why? Because sometimes the clipboard comes in with rich text formatting that’s anti-helpful.
The workaround is to paste into a plain text editor, or the console, then recopy and repaste into qCad.

Either way the ctrl-shift-V shortcut is useful for those trained on other software but:
one could also argue that qCad should NEVER take rich text, and rather only accept the plain text with both CTRL-V and CTRL-SHIFT-V.

— CHV says

Agreed, having encountered it numerous times while documenting with text snippets from elsewhere. :roll:
Even copying Info measurements from the Command Line are Rich Text.

The best place to file a feature request is QCAD Bugtracker:
https://www.ribbonsoft.com/bugtracker/ You may need a different account there or make a new one.

May I remark that Ctrl-Shift-V is already in use for Paste along Entity (PE)
But not when the Text Editor Widget has the focus and dialog Widgets are always modal on a Win OS system. :wink:
Still, I’ll vote for it in any way.:P

Regards,
CVH

2370QCAD (main)Feature RequestLowRetain global width / segment widths when reversing pol...Assigned
0%
1 Task Description

Andrew,

Changing orientation of a polyline with RV or by changing it in the Property Editor clears the global width value.

Single line pieces as polyline default to CCW.
Still the global width is cleared when trying to set them CW.

I didn’t update since 3.27.0 but reading this topic I suppose it still is valid.
Related: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9362

Regards,
CVH

2540QCAD (main)Feature RequestLowRetain original handle when Hatch properties are change...Assigned
0%
1 Task Description

Andrew,

When we alter about any property of a Hatch entity it seems to be recreated with a newer/higher handle.
This doesn’t influence the drawing order in direct.
But already changing the drawing order of a Hatch it is recreated as a new entity.

It starts to matters in drawing order when there are multiple entities with the same drawing order and that after save/reload. Entities with the same drawing order then receive a new drawing order based on the original but sequentially increasing based on handle.

Because a Hatch is recreated with a newer/higher handle each time a property changes it will thus always end up above the others with the same order even when the original was created earlier.

This is more pronounced when copying/pasting entities from a source to a target drawing.
The original Hatch drawing order is retained but it will always be above existent entities with the same drawing order in the target drawing after save/reload.

Most other entities are probably just updated in situ.
It is unsure to me at this point if merely updating a Hatch is even possible.
And perhaps this is related to the addObject ForceNew flag what is false by default.

Regards,
CVH


	
1224QCAD (main)Feature RequestLowRevision cloudsLikely to be implemented
0%
9 Task Description

Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.

2301QCAD (main)Feature RequestLowRotate preview on/offAssigned
0%
1 Task Description

Hi,

I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.

It would be nice to have an option to turn this preview on/off.

275QCAD (main)Feature RequestLowRounding all corners of a polylineAssigned
0%
3 Task Description

Modify - Round - Click polyline - round all corners

783QCAD (main)Feature RequestLowSave as .dgn option missing in 3.0.8?Assigned
0%
Task Description

Not really a bug I suppose but the save as.dgn file format is missing in snapshot 3.0.8 release.

Will this be available again soon?

2195QCAD (main)Feature RequestLowSaved views include memory of blockAssigned
0%
1 Task Description

When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.

1903QCAD (main)Feature RequestLowSaving layer settings, e.g. visibility status, associat...Assigned
0%
1 Task Description

In a medium complex drawing it may be too much details to have all layers in a drawing visible at once.

Instead a number of views would be created that saves not only zoom level and position but also what layers are visible and not (as appropriate for the purpose of that particular view). This is very cumbersome (to the extent it is not really realistic) to achieve today and requires a lot of duplication of both model and layers.

The advantage of adding this is the ability to have only one model (with multiple views) and avoid duplication of work and the risk of inconsistency inherent with many copies of the model.

As a further (and natural extension to this) would be the ability to used this functionality with view-ports to be able to create (possibly many) paper-spaces from a single model. This would however require view-ports to be aware of what view they are a window into. A single change in the model would then propagate to all defined view-ports and paper-spaces.

2448QCAD (main)Feature RequestLowScale lineweight display on model spaceAssigned
0%
1 Task Description

Currently, the model space can display lineweights at scale 1:1
It’s very convenient when drawing small objects that will be printed at scale 1:1 : it makes it easy to anticipate the final aspect of the printed drawing.
But this feature is unusable for architects or users who draw large objects.

Therefore, it would be very useful to have a factor to multiply lineweight display in model space.
For example : if i know my drawing will probably be printed at scale 1:50, i set the value of the lineweight factor to 50.
Then every line would be displayed 50x thicker in model space.

1187QCAD (main)Feature RequestLowScale possibility for Info tools ...Assigned
0%
3 Task Description

Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”.
It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.

789QCAD (main)Feature RequestLowScale tool - mouse-pointer - inversely proportional sca...Assigned
0%
2 Task Description

3.0.8.
Bug Report or Feature Request ..... I’m not sure!

If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale.
x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...

2182QCAD (main)Feature RequestLowSelect > Select PreviousAssigned
0%
3 Task Description

Select the previously selected entities.

1755QCAD (main)Feature RequestLowSelecting standard rotation angles by mouse click for M...Assigned
0%
1 Task Description

This would be nice.
It will save a lot mouse - keypad changes for me.

1026QCAD (main)Feature RequestLowSelection Filter also present in the Menu "Selection"Assigned
0%
Task Description

It would be nice to have the Selection Filter also present in the Menu / Selection List

992QCAD (main)Feature RequestLowselections to stay selected when projecting to an isome...Assigned
0%
Task Description

My request is that all selected entities stay selected after isometric projection, this would be useful for example if you need to modify the projection further after placing!
Maybe an extra button could be added in the ISO options?

1549QCAD (main)Feature RequestLowSeparate Coordinate Display from Drawing DimensionsAssigned
0%
Task Description

Source:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4752

According to the changelog for version 3.9.3 the info tools and coordinate display are tied to the current drawing dimensions. For much of my use I prefer to have the dimensions format different. The main reason is that my customers want to see the format in fractions, but when I am drawing I’d rather see the decimal format to make sure what I am drawing is accurate. So I’d really be interested in seeing a separate full configuration of the display and info coordinates.

564QCAD (main)Feature RequestLowSettings organisation in levelAssigned
0%
Task Description

As an old professional “documentation writer and user inteface designer” but IMHO, I’m not convinced that the “Application preferences” are correctly organised for ease of understanding and using them.
These settings are organised in 2 levels. Some of the first levels have their own settings (e.g. “Graphics view”) while most others don’t (e.g. “Load/save”). May I humbly ;-) suggest some consistency rules :
- no sub-level if there is only one subject
- no items on main level if there are already 1 or more sub-level(s).
For instance :
- sub-level “Default Dimension settings” under “Dimension” is the only sub-level : then move these items under main level “Dimension” and suppress the sub-level ;
- the items under “Graphics view” main level (with several sub-levels)could be in a sub-level named “General” ;
Actually, “Graphics view” main level is the only one which has both its own items and sub-levels ;-))) ?

566QCAD (main)Feature RequestLowShortkey for rectangle text rotationAssigned
0%
1 Task Description

I would like to get a shortkey like ‘+’ to rotate text at 90° clockwise.

2338QCAD (main)Feature RequestLowShow non-QCAD custom XDATA optionallyAssigned
0%
1 Task Description

QCAD (before version 3.27?) used to show some custom XDATA, e.g. tag 1000, even for application names that are not “QCAD”, which for me was useful, so it’s somewhat of a regression. (I think it was broken when selecting multiple items, maybe that’s why it was removed.)

I suggest to bring that feature back, but maybe show it only when a single element is selected if that’s easier.

(As a workaround/hack I guess it would be possible to rewrite the required information as QCAD compatible XDATA externally I guess.)

1878QCAD (main)Feature RequestLowSnap > Distances from 2 Points: snap to point with give...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211

817QCAD (main)Feature RequestLowSnap and cut all intersection in a given area tool ...Assigned
0%
Task Description

As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch.
To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries.
The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....

Clive mentioned on this:
Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.

2127QCAD (main)Feature RequestLowSnap for predicted intersections while using "Restrict ...Assigned
0%
2 Task Description

I would like to request a new kind of snap: a “Restricted Intersection” snap that appears at the point where an entity would intersect with a line drawn from Relative Zero that fulfills the current EL criteria. “Restricted Intersection” snaps would be similar to other Relative Zero-based snaps (like “Perpendicular” and “Tangential”), but would predict the point of the snap from the EL constraints instead of the characteristics of the entity being snapped to. Naturally a value of 0 for angle or length would result in that constraint being ignored.

Additional operational flexibility could be achieved by allowing the snap to exist regardless of whether EL is actually in use. To be useful this would probably require determining snap locations based on angle OR length as opposed to angle AND length.

Implementing this new snap would allow, for example, for easily drawing a line of unknown (but determinable) length at a specified angle between a given point and a given entity (see discussion here), with the “Restricted Intersection” snap ensuring that the endpoint of the new line forms an intersection with the entity in question. Currently the same goal can be achieved a couple of different ways, but they all involve at least two separate steps.

1428QCAD (main)Feature RequestLowSnap middle of the minimum distance between two entity'...Assigned
0%
5 Task Description

Hi,

from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.

Pic 1: Given situation
Pic 2: Result after using this new snap tool

Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?

1107QCAD (main)Feature RequestLowSplines: add / remove control points of existing spline...Assigned
0%
2 Task Description

Tools to add control points to existing splines and remove control points.

1407QCAD (main)Feature RequestLowSplines: add support for knot weights, start-, end tang...Assigned
0%
1 Task Description

Attached DWG/DXF files are incorrectly read by QCAD.
They contain splines drawn using ZWCAD and saved as DWG/DXF version 2000.
Above splines are polylines created with autolisp routine which converts spline to polyline, so you can see how splines should actually be drawn.

First spline is created with fit points: 2,2 4,4 6,2
Then copied and applied weight of 2 on central control point.
Then copied again and applied weight of 0.5 on central control point.

Second spline is created with fit points: 6,2 8,4 10,2 with vertical start and end tangent.
Then copied and applied fit tolerance of 1 for fit points.

Third spline is created with fit points: 10,2 12,4 14,2 with horizontal start and end tangent.

Fourth and fifth spline are correctly drawn by QCAD.

Link to bitmap (converted to png) export:
External Link

Versions
QCAD version: 3.13.1.0
Date: Mar 17 2016
Qt version: 4.8.4
Compiler version: gcc 4.4.3
Build Date: Mar 17 2016
Revision:
Architecture: x86_64
OS: Linux
OS version: Unknown

1126QCAD (main)Feature RequestLowSuggestion for Dimension Location settingAssigned
0%
3 Task Description

Please seet topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124

1034QCAD (main)Feature RequestLowSupplementary note added to Application preferences dia...Assigned
0%
Task Description

I think it would be useful to add a note to the Application preferences dialog window, to explain to the user the difference between ‘Application and Drawing’ preferences and how it effects drawings in QCAD.

Please see topic for more details and feedback:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2831&p=9724#p9724

1886QCAD (main)Feature RequestLowSupport advanced tolerance settings for dimensionsAssigned
0%
2 Task Description

Add support for
- tolerance display (dimtol)
- upper limit (dimtp)
- lower limit (dimtm)
- tolerance precision (dimtdec)
- tolerance text size factor (dimtfac)
- tolerance suppress zeros, etc.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269

2037QCAD (main)Feature RequestLowSupport alternative angle referenceAssigned
0%
Task Description

E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.

693QCAD (main)Feature RequestMediumSupport for external references (XREF)Likely to be implemented
0%
28 Task Description

Support for external references (XREF)

1098QCAD (main)Feature RequestLowSupport for set of layersAssigned
0%
Task Description

Many constructions refer to a basis of elements, which stay constant in all follow-ups. As an example there is a floorplan and I would like to create different variations of room layout (e.g. A and B). In my example the basis consists of 30 layers an each variation needs 10 further ones. At last there are 50 different layers in my drawing. Designing layout A needs layer 1 to 30 (basis) and 31 to 40 (A) to be shown, but 41 to 50 (B) must be invisible. Now I modify Var.B which makes me to single click the visibility of 31 to 40 (A) to be not shown and 41 to 50 (B) to be shown. You’ve got it?

It would be great help, to save the set of all shown layers by an individual name in a pulldown-menu. Visibility of my variations could be chosen by userdefined “set of layers”, e.g. “Var-A”, “Var-B” and “Var-A_but_different”. In this way I pick just one set-name in my pulldown-list instead of marking and demarking between countless layers.

In my opinion this tool would be a small aspect in QCad but a giant leap for user-pleasentness ;-)

598QCAD (main)Feature RequestLowSupport tangents between ellipsesAssigned
0%
2 Task Description

To add support for drawing tangents between ellipses.

See topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003

2272QCAD (main)Feature RequestLowSupport unit "US survey foot"Assigned
0%
Task Description

In the US, it is (unfortunately) still common to use US survey foot. It seems at least some DXF applications/libraries support this unit as a $INSUNITS value, some references:

There are two issues regarding this with QCAD:

  1. If you open a document with $INSUNITS being 21, it’s reset to 0 (unitless/unspecified) when saved again, even when not changing anything.
  2. It is not possible to select these units in the GUI.

I don’t know about standardization of these values, but my hope is that it’s at least possible to preserve the unit in an existing drawing. Given that this unit is supposed to be obsolete in some years, it might seem less important, but due to this transition, it might get even more important to be able to distinguish between units. Thanks!

208QCAD (main)Feature RequestLowSVG export: support custom line weightsAssigned
0%
Task Description

Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594

1233QCAD (main)Feature RequestLowTab key to cycle between selected objectsAssigned
0%
Task Description

I think it’s a useful adition and makes it easy to select objects that are overlapped. I know there is a selection filter, but sometimes this is faster and/or all the objects share the same type and such things.

If I remember correctly, Inkscape has this behaviour.

Thanks.

2331QCAD/CAMFeature RequestLowTabs: Control over on which particular profile used.Assigned
0%
Task Description

Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.

It would be nice to have some kind of control on which profile a tab has to be used.

2456QCAD (main)Feature RequestLowTangent arcAssigned
0%
3 Task Description

It would be great if QCAD could create an arc tangent to another entity without necessity to type a radius.
Just two simple steps:
1. Click the endpoint of another entity to start the arc. The arc is tangent to the starting entity.
2. Click the second point to place the arc.

979QCAD (main)Feature RequestLowText dialog: insert special characters in simple text m...Assigned
0%
1 Task Description

The Omega button to insert special characters is only available in rich text mode.
Make it available in simple text mode as well.

516QCAD (main)Feature RequestLowTo add option to 'print only' selected area.Assigned
0%
2 Task Description

To add the option to ‘print only’ selected area in a drawing.

674QCAD (main)Feature RequestLowTo add optional 'auto' dimension tracking feature.Assigned
0%
Task Description

It might be useful for some to have the option to turn on/off ' auto’ dimension tracking option.

See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=2&p=6893#p6893

708QCAD (main)Feature RequestLowTo re-introduce Tile and Cascade window optionsAssigned
0%
1 Task Description

To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.

2091QCAD (main)Feature RequestLowToggle redrawing of hatches Assigned
0%
2 Task Description

Because modifying hatches have lag issues I’d like to propose a toggle that turns of the redrawing/rendering of the hatch. Especially while modifying the hatch.

The hatches always have a boundary that can be worked with right? So when we move or stretch the hatch we can still see the boundary and its handles to perform all the actions.

This could be a new view mode that turns of the view of the interior/pattern of the hatch but leave the boundary of the hatch.
Or the draft mode can be extended to include simplified hatches while modifying.

Also see the discussion

596QCAD (main)Feature RequestLowTool "Lengthen" mit "Total" erweitern oder ....Assigned
0%
1 Task Description

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel ;-)

1594QCAD (main)Feature RequestLowTool matrix: allow reordering of toolsAssigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923

2471QCAD (main)Feature RequestLowTool request: Arc - 2 Tangents and radius ...Assigned
0%
2 Task Description

... inclusive trim option ;-)

I’m already able to use the Circle tool “2 Tangents and radius” to accomplish this task but it is a lot of break out etc. action needed to clean the shape afterward.

2330QCAD/CAMFeature RequestLowToolpath optimization optional (on/off)Assigned
0%
2 Task Description

Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033

1846QCAD/CAMFeature RequestLowToolpath preset offsetsAssigned
0%
Task Description

Hi Andrew

A request for adding some fields to the toolpath

Showing tasks 301 - 350 of 371 Page 7 of 8<<First - 4 - 5 - 6 - 7 - 8 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing