QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  descProgress
2540QCAD (main)Feature RequestLowRetain original handle when Hatch properties are change...Assigned
0%
1 Task Description

Andrew,

When we alter about any property of a Hatch entity it seems to be recreated with a newer/higher handle.
This doesn’t influence the drawing order in direct.
But already changing the drawing order of a Hatch it is recreated as a new entity.

It starts to matters in drawing order when there are multiple entities with the same drawing order and that after save/reload. Entities with the same drawing order then receive a new drawing order based on the original but sequentially increasing based on handle.

Because a Hatch is recreated with a newer/higher handle each time a property changes it will thus always end up above the others with the same order even when the original was created earlier.

This is more pronounced when copying/pasting entities from a source to a target drawing.
The original Hatch drawing order is retained but it will always be above existent entities with the same drawing order in the target drawing after save/reload.

Most other entities are probably just updated in situ.
It is unsure to me at this point if merely updating a Hatch is even possible.
And perhaps this is related to the addObject ForceNew flag what is false by default.

Regards,
CVH


	
2544QCAD (main)Feature RequestVery LowRequest to add "plain text" paste, traditionally CTRL-S...Assigned
0%
2 Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10379

Could you add “plain text paste” as ctrl-shift-V
Why? Because sometimes the clipboard comes in with rich text formatting that’s anti-helpful.
The workaround is to paste into a plain text editor, or the console, then recopy and repaste into qCad.

Either way the ctrl-shift-V shortcut is useful for those trained on other software but:
one could also argue that qCad should NEVER take rich text, and rather only accept the plain text with both CTRL-V and CTRL-SHIFT-V.

— CHV says

Agreed, having encountered it numerous times while documenting with text snippets from elsewhere. :roll:
Even copying Info measurements from the Command Line are Rich Text.

The best place to file a feature request is QCAD Bugtracker:
https://www.ribbonsoft.com/bugtracker/ You may need a different account there or make a new one.

May I remark that Ctrl-Shift-V is already in use for Paste along Entity (PE)
But not when the Text Editor Widget has the focus and dialog Widgets are always modal on a Win OS system. :wink:
Still, I’ll vote for it in any way.:P

Regards,
CVH

1815QCAD/CAMFeature RequestLowAdd Laser tool optionAssigned
0%
Task Description

Hi Andrew,

Creating G-code for cnc-laser, the laser-tool can not be correctly set at all.

Attached a laser tool proposal

1841QCAD/CAMFeature RequestLowQCAD/CAM Postprocessor "Hpgl": Add pen colors to HP/GL ...Assigned
0%
Task Description

Add SPx; with x being pen number from 1-8.

TODO:
- Which color corresponds to which pen number?
- What if there are more than 8 colors in a DXF files?

1844QCAD/CAMFeature RequestLowHP/GL (PLT) importAssigned
0%
Task Description

Hi Andrew

QCAD/CAM misses a hpgl.plt import. If gerber and G-code can, so should plt.

1846QCAD/CAMFeature RequestLowToolpath preset offsetsAssigned
0%
Task Description

Hi Andrew

A request for adding some fields to the toolpath

1877QCAD/CAMFeature RequestLowPost Processor TutorialAssigned
0%
Task Description

Hallo Andrew,

I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.

Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

2164QCAD/CAMFeature RequestLowAdd ability to pan the 3D view with a modifier key and ...Assigned
0%
2 Task Description

With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.

2213QCAD/CAMFeature RequestLowAllow editing Spindle Speed separately for each Toolpat...Assigned
0%
1 Task Description

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

2233QCAD/CAMFeature RequestLowMore selection options to select sheets for nestingAssigned
0%
Task Description

I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.

2307QCAD/CAMFeature RequestLowTools to create dogbones or corner overcut Assigned
0%
2 Task Description

The inside corners of profile tool paths have rounded inside corners. This occurs because the rounded outside the bit cannot make it all the way into the corner of the feature. Think of tracing the inside wall of a cardboard box with a can of soup. The can makes direct contact with the box walls, but its
round shape is unable to completely fit into the tight corners— there’s always a gap.

In a dog-bone overcut (see the figure in attachment), the inside profile corner is enlarged into a semicircle, allowing the sharp edges of the mating piece to slide through without interference.

When a dog bone is applied to the inside corners, as shown in the second figure in the attachment, the joints fit together nicely!

The following website explains what should be implemented More elegant CNC dogbones

There are two ways to implement this tool. Either you modify the original design (as implemented in Fusion 360) or you can do it at the moment you define the tool path (Estlcam allows you to do this for example). See the feature Corner overcut, on Estlcam website

2330QCAD/CAMFeature RequestLowToolpath optimization optional (on/off)Assigned
0%
2 Task Description

Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033

2331QCAD/CAMFeature RequestLowTabs: Control over on which particular profile used.Assigned
0%
Task Description

Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.

It would be nice to have some kind of control on which profile a tab has to be used.

2374QCAD/CAMFeature RequestLowAdd Spindle Speed to Toolpath DialogAssigned
0%
1 Task Description

When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.

Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.

Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?

Many thanks’, and best regards.

2418QCAD/CAMFeature RequestLowInclude a GroupCustom widget in CAM Toolpath dialogs.Assigned
0%
2 Task Description

Andrew,

Unrelated to OS or QCAD version.

In the postprocessor configuration dialog there is a group box called ‘GroupCustom’.
One can add custom widgets to that, rename it and so on.

Such is not provided in CamProfileToolpathDialog.ui or CamDrillToolpathDialog.ui

It should be possible but we aren’t really able to mix up things with the ‘Message’ QLabel ...
A reserved QGroupBox would do the trick. ;-)

Related topic:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9647

Regards,
CVH

2506QCAD/CAMFeature RequestLowInclude arc segmentation for 'milling' On-Path.Assigned
0%
3 Task Description

Related forum topic:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10468

For ‘milling’ on path it doesn’t consider

this.arcInterpolation = true

in the custom postprocessor nor the checked option in the CAM Configuration Dialog.

As far as detected the CamArcInterpolation checkbox of the CAM Configuration Dialog is unrelated to the this.arcInterpolation in the postprocessor.

Regards,
CVH

2507QCAD/CAMFeature RequestLowAdd Toolpath from LayerAssigned
0%
1 Task Description

I’ve been able to make this work as proof of concept very easily, but many of the functions are inaccessible/difficult to override from post-processors.

Desired functionality:

1) Enable “Add Profile Toolpath” UI elements all the time (remove setRequiresSelection)
2) CAM Profile Toolpath Dialog: Drop-down menu of available Layers. First option “By Selection Only” 3) “By Selection Only” continues to pass EntityIds of selected objects (existing functionality)
4) Choosing an active Layer will use the Layer as source of EntityIds
5) Any changes to Entities on a Layer will result in those new/removed/changed objects being re-generated without having to manually select and update the tool paths. Either do not recover list of EntityIds from the ToolpathBlock, and instead use “live” each time it’s regenerated, or additional functionality to determine if a LayerId is associated with the Toolpath, and then lookup EntityIds.

I assume the persistence of the Layer selection would be available within the Toolpath, so that it will automatically update EntityIds every time a Toolpath is regenerated, without having to select Entities and updating the toolpath manually.

For large projects, being able to force select objects based upon layer dramatically reduces mistakes and speeds up the workflow.

Thanks

Showing tasks 351 - 371 of 371 Page 8 of 8<<First - 4 - 5 - 6 - 7 - 8

Available keyboard shortcuts

Tasklist

Task Details

Task Editing