|
943 | QCAD (main) | Bug Report | Medium | Dashed lines with line weight 0 are displayed as contin ... | Closed | |
|
Task Description
When we create a draft in version 2.2.2 we put dashed lines and the length is 0. We see a dash lines. (see attach file).
When we open the same draft in the version 3.3.2 we don’t see the dashed lines we see a continous lines.
If I changed in the dxf this lines DASHED 370 0 per DASHED 370 5 and changes the preference of the drawing it’s work.
But we don’t want to open all of 180000 drawings to change the length of the dashed lines from 0 to 5. We want that the version 3 print the dashed lines as the version 2.
Thanks
Eric
|
|
917 | QCAD (main) | Bug Report | Medium | Integrated help not working | Closed | |
|
Task Description
Help - Reference Manual does not have any effect on Windows.
|
|
905 | QCAD (main) | Bug Report | Medium | Text tool regression | Closed | |
|
Task Description
Happened somewhere between ab3e02 (works) and 67516a (doesn’t work).
In 67516a (current HEAD), when I attempt to launch the Text tool, the following is printed on stderr:
Warning: Script Exception:
"ReferenceError: Can't find variable: RTextBasedData"
Warning: "<anonymous>()@/tmp/qcad/scripts/Draw/Text/TextDialog/TextDialog.js:838"
The Tool options toolbar does appear and it can be interacted with. The Text tool does not appear at all (and text input in the Toolbar can not be placed either).
In ab3e02, the Text tool works as usual.
Hope I got it right this time – several clean builds have been made to double-check results.
|
|
875 | QCAD (main) | Bug Report | Medium | malloc.h is deprecated | Closed | |
|
Task Description
This concerns the third-party openNURBS project and should probably be reported there, but I failed to find a bug tracker or anything of the sort, so here it goes.
malloc.h is deprecated (it has not been required since at least SUSv2, ratified in 1997). Apparently FreeBSD takes a more explicit stance against the use of it than other systems. The attached patch does away with it in openNURBS (conservatively leaving it in on Linux, but that should not really be neccessary either).
This makes the openNURBS component buildable on FreeBSD (9).
|
|
872 | QCAD (main) | Bug Report | Medium | Crash in dwg2svg | Closed | |
|
Task Description
Conversion of certain files leads to crashes (segmentation fault).
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2501
|
|
847 | QCAD (main) | Bug Report | Medium | Info - Distance PP, EP: ruler ticks too dense | Closed | |
|
Task Description
Info tools show too many ticks which leads to slow down / crash.
|
|
831 | QCAD (main) | Bug Report | Medium | Multiple words of non-english language in Richtext are ... | Closed | |
1 |
Task Description
Version - 3.1, binary.
If I “Draw text” with text “aaaa bbbb” - it displays correctly, but when I enter “аааа бббб” (with russian keyboard) - I see that “аааа” and “бббб” are displayed one above other - see screenshot.
The same problem is for imported .dxf file with russian texts in it. Problem makes the solution as a whole actually inusable for (at least, some of) russian users.
|
|
739 | QCAD (main) | Bug Report | Medium | QCAD fails to open a DXF file generated by itself | Closed | |
|
Task Description
QCAD does not manage to load an DXF file created by itself (presumably, I don’t remember excactly, could be the last 2.x version). When selecting File ⇒ Open on the file in attachment, QCAD shows a pop-up reporting the following error :
Cannot open file »‘/home/gillonr/Documents/Projects/Familly/Br.../Chambre Parents/Plans/Plan-PaterNoster.dxf’. » Please check your access rights, the file format and file extension.
The file permissions are OK, there is no issue of disk space on the volume where the file reside or where the QCAD distribution is installed or at any other critical location. The problem does not happen on other files created with QCAD, so it appears to be data dependent.
The file causing trouble in QCAD can be imported in LibreOffice 3.4.2 w/o reporting errors (but that application does not provide the suitable methods / tools to edit this format...).
(1) Is there a way to activate debugging when reading in data from a DXF ? (2) Is there some tool (ev. 3rd party) allowing to check that the data is clean ? (3) Can someone identify the cause of the problem (presumably some data construct or maybe corruption) ? (4) In case it would turn out that the problem is a QCAD bug, is there a work-around (I need these drawings...).
|
|
727 | QCAD (main) | Bug Report | Medium | 100% CPU Usage with 3.0 Final Version. | Closed | |
|
Task Description
I am continuing my testing on version 3.0 Final.
I noticed that, with 3.0 Final open, the service “syslogd” (on OSX Leopard PPC) does get CPU consumption up to 100%, making the machine unusable.
This has never happened with the RC2 version.
It’s possible to have a copy of RC2 while they investigated the problem? Unfortunately I have not kept a copy.
|
|
725 | QCAD (main) | Bug Report | Medium | Inserting items from part library may create invalid bl ... | Closed | |
|
Task Description
To reproduce: - Create a part library item with file name “Test1 .dxf” (note the space at the end of the base name) - Insert this part library item into a blank drawing - Try to save the drawing - Error “Invalid Symbol Table Name” occurs
|
|
707 | QCAD (main) | Bug Report | Medium | segmentation fault on every start - after crash | Closed | |
|
Task Description
I was drawing on a drawing done in qcad2 - and now working on it in qcad3 - where I had saved it in the new dxf 2010 format (if this has any relevance) and then the computer ran out of power (old battery - I missed that I hadn’t turned on external power) - and shut down hard.
When I rebooted and tried to start qcad - it crashed on startup - giving only this output: Debug: TIMER: 42 ms - “loading plugins” Debug: TIMER: 459 ms - “initializing plugins” ./qcad/qcad: line 38: 2955 Segmentation fault (core dumped) LD_LIBRARY_PATH=”$DIR” “$binary” $OPT1 $OPT2 “$@”
I then tried removing the entire qcad-3.0.0-prof-linux-alt-x86 folder - and unpackaging the install tar.gz again.
It then started up and came to initializing plugins - 79% - and just hung - I’ve attached screenshot.
After I ctrl+c’ed it - it segfaulted and now it won’t even show the startup splash again.
I’m guessing qcad has saved some state somewhere.. but qcad hasn’t made a ~klavs/.qcad - so I don’t know where it is.
I would very much like to be able to use qcad again :(
|
|
706 | QCAD (main) | Bug Report | Medium | Part Library not displaying parts | Closed | |
|
Task Description
When I open the part library, it displays a dialog saying “Updating Index”, after it finishes, none are displayed, and the filesystem bar at the top is empty, clicking on it does nothing.
|
|
693 | QCAD (main) | Feature Request | Medium | Support for external references (XREF) | Likely to be implemented | |
28 |
Task Description
Support for external references (XREF)
|
|
688 | QCAD (main) | Bug Report | Medium | QCAD3: Deadlock happens during text operation when one ... | Closed | |
|
Task Description
I just use QCAD3 for the first time. I work with OpenSuse 12.2. After having unpacked the downloaded package, I am able to start QCAD3 with the QCAD command icon. Check shows that i used the most actual version. Obviously no further installation steps are necessary. I am able to draw some lines, etc. However, when trying to select a font, I recognized that the computer hangs at least for 5 minutes. The CPU load is about 50%, and i am not able to move the mouse and to do anything else. During this time, sometimes there is access to disk, sometimes not. So, in order lo cancel the hanging, i must make a hard system reboot. Before i have entered the font selection, i have tried to look into the help options. However, It was not possible to get the FAQs and the QCAD forum, so i am not aware about similar documented problems. I have looked after similar bugs, using the words ‘text, font’. No similar bugs found.
|
|
653 | QCAD (main) | Bug Report | Medium | crash on some file operations may be Qt related | Closed | |
|
Task Description
On file open selection from main menu or on output to PDF Qcad crashes
error:
I/O error : No such file or directory /usr/share/mime/inode/directory.xml:1: parser error : Extra content at the end of the document
|
|
635 | QCAD (main) | Bug Report | Medium | hatch fills wrong area, saving results in "Exception oc ... | Closed | |
|
Task Description
Attached you’ll find a floor plan.
Trying to fill the walls (layer “KG_Wand”), the hatch does not fill them but the space inside the rooms. Saving the file (with the wrong hatch) leads to
Exception occurred. Entity NOT saved: 148
in the Command Window, after re-opening the file the hatch is (as expected) not existing anymore.
|
|
608 | QCAD (main) | Bug Report | Medium | Page orientation can not be changed while page preview ... | Closed | |
|
Task Description
When in print-preview mode, the page orientation (portrate or landscape) can be changed using its document-preference dialog box, but it does not take effect.
|
|
580 | QCAD (main) | Bug Report | Medium | Black color reverted to white color on each close | Closed | |
|
Task Description
Hello,
When I started Q3, I selected a White background in the initial dialog window. I opened a copy of a good Q2 file and saw that ALL entities with Q2 Black/White color where forced to be White. Andrew explains this as a mean to avoid unreadable items against the background colors. Remember I selected White as background ? I guess Black/White entities could be better kept as Black ?
Following Andrew’s advice, in Application Preferences =⇒ Graphics View, I unchecked the Auto correct black and white colors check box. The background settings is white. OK.
I went through a process of changing the White color for several layers to Black. I also had to change the color codes for the hatch areas. For instance, the hatch area layer “055_F_Murs” has “14-76-255 / 255-197-179” values in Q2. Why these values are auto corrected to “30-128-255 / 255-191-127” ?
After these changes, I saved the file, closed Q3 and opened the file again.
Catastrophique ! All “Black/White” layers were back to Black and the hatch colors were back to the “auto corrected” values.
Changing the background color to black then white seemed to solve the problem : the layers kept the Black color. Actually it was just an illusion.
Yesterday too much confident, I spent the whole day, modifying layers to Black, adding new layers also Black or custom color, checking the line weight (replacing the “default” (?) value of 0.25 mm with my preferred default value of 0,00 mm, I’ve posted on the forum about this) and so on. I saved the file, closed it. To-day, nearly all layers have lost their colors : - Black ones are again White, - custom color are “auto corrected” as above for “055_F_Murs”, - only the standard non Black/White colors are preserved, like Blue, Magenta etc.
At this point, I can’t continue using QCAD 3 with enough reliability as my color settings are always lost. This is why I qualify this bug as CRITICAL. I don’t want to use a Black background or a Light Blue one. Why do you think all old “green on black VDU” were replaced with “black/color on white” displays, to begin by Apple ?
NB I already reported this but can’t find it in the list (maybe because I forgot to enter a summary ? No warning, happily I had a copy with Notepad), sorry for the duplicate.
|
|
563 | QCAD (main) | Bug Report | Medium | Hatches and colors transformed in Q3 | Closed | |
|
Task Description
To check compatibility for the same .dxf drawing prepared with Q2, I prepared 2 copies, one with a “_Q2” suffix and the other with “_Q3”. I managed to keep an operational Q2 system on the same Win7-HomeEditionPremium-64bits PC. As you can guess, I opened each copy with the relevant QCAD version.
In each version, I selected the same hatch layer and list here their properties along with a hardcopy of a display of a similar part of the hatched area, with blue lines showing the differences in hatching, apparently the density. Q2 : Solid:False, Scale:3.00, Angle:0, Name:ar-brelm ; the color is described in its panel as 20,255,255 and 255,85,0 (left colum first from top to bottom). Q3 : all identical values but Scale:0.78189.
Another comparison with a global view of the same drawing. Just notice how the hatching in the areas at the bottom are different (red lines). Also, I noticed that increasing the zoom let the hatching appear in the Q3 version instaed of the grey homogenous color, but the hatching in Q3 remains more dense than in the Q2 version. Q2 : Solid:False, Scale:1.00, Angle:0, Name:ar-conc : color is a standard grey (0,0,128 & 128,128,128) Q3 : Solid:False, Scale:0.246063, Angle:0, Name:AR-CONC : color is qualified as “custom” even with the same values. Both have “centimeter” as drawing units.
Then I opened another Q2 drawing with Q3. I elected to hide all layers then to show all of them. And the color hatching of some aras were then modified. See 3rd picture with all black areas. (Just changing the layers shown or hidden was enough to not allow to close the drawing without a save...).
Than you for your attention or letting me know which setting can correct the differences.
|
|
552 | QCAD (main) | Feature Request | Medium | autosave removing last auto saved file | Closed | |
|
Task Description
I would like to see an autosave-option which allows to autosave, but which keeps only the latest autosave file (instead of all). So there would be autosave (if something crashes) but the hard disk is not filled up too fast.
|
|
531 | QCAD (main) | Bug Report | Medium | Qcad stops working after selecting and moving an entity ... | Closed | |
|
Task Description
I am a new user and bought qcad this afternoon. Sometimes qcad stops working after selecting and moving an entity. it happens almost every one to two hours. twice until now. I tried version 2.2.2.0 that didn’t have this problem.
|
|
530 | QCAD (main) | Bug Report | Medium | sporadic unwanted close of QCad | Closed | |
|
Task Description
Using the move and scale tools, QCad sometimes (reason unknown so far) crashes in RC4 (never seen that in RC2).
|
|
520 | QCAD (main) | Bug Report | Medium | move entity from command line is broken on ubuntu 64 bi ... | Closed | |
|
Task Description
when I try to move an entity via the command line using the mv command the entity does not move to the specified position. it works if i use the mouse. this was fine in rc2 and rc3 ubuntu 64 bit and windows 64 bit machines.
|
|
518 | QCAD (main) | Bug Report | Medium | Unable to use Library browser properly in RC4 | Closed | |
|
Task Description
Hi Andrew
In Ubuntu 11.10 and Windows 7 everything so far is working ok in QCAD apart from the Library browser!
1.In Win 7-64 I can run the browser and make a new folder, but when I try to set the permissions/open the folder - browser crashes.
2.In ubuntu 11.10 I first uninstalled RC2 then installed RC4. QCAD program runs ok but this time when I try to open up the browser (not a new folder)I get an error message stating that I do not have permissions to open the first file (vehicle -I think!)in RC2? If I select OK in the warning window the warning just keeps on repeating the same message for the next and subsequent files until I quit it.
|
|
515 | QCAD (main) | Bug Report | Medium | File - Save / Save as: Null Object ID | Closed | |
|
Task Description
“Null Object ID” exception when saving a previously loaded file.
File: “fs515.dwg”
|
|
510 | QCAD (main) | Bug Report | Medium | paste between layers always indicates "locked Layer" | Closed | |
|
Task Description
1. copy an item from one layer 2. add new layer 3. attempt to paste into new layer
Error message: “Trying to draw on or modify entities on a locked layer”
The layer is not locked as I can draw into it... Also tried turning lock “on” and then “off” again; still same message.
|
|
499 | QCAD (main) | Bug Report | Medium | hatch does not save | Closed | |
|
Task Description
When adding a hatch in a drawing, the hatch is vissible and printable but after saving and closing some of the hatches have dissapeared when reopening the drawing.
After several attempts the same hatches in the same objects always dissapear or are not saved.
When needed i can send the drawing, please let me now!
|
|
497 | QCAD (main) | Bug Report | Medium | Trim: Tangent on circle: debugger appears | Closed | |
|
Task Description
having a line tangent on a circle, the Qt Debugger appears when: - select trim tool - select line - mouse over circle
The debugger stops in line 326 of scripts/Modify/Trim/Trim.js (trimmed1.trimStartPoint(is2);) with the following message: Uncaught exception at scripts/Modify/Trim/Trim.js:326: Error: :-1:-1: Wrong number/types of arguments for RArcEntity.trimStartPoint(). <native>(undefined) at -1 <anonymous>(op = RMixedOperation(0xe50a9a0), limitingEntity = RLineEntityPointer(0xff9b740), limitingShape = RLine(RShape(address: “0xe2a1608”), startPoint: RVector(36379.7, 46367.3, 0) , endPoint: RVector(40858.6, 44174.7, 0) ) , limitingPos = RVector(37446.8, 45886.1, 0) , trimEntity = RCircleEntityPointer(0xefa0170), trimPos = RVector(37054.5, 45938.9, 0) , trimBoth = false, preview = true) at scripts/Modify/Trim/Trim.js:326 <anonymous>(preview = true) at scripts/Modify/Trim/Trim.js:186 <anonymous>() at /opt/qcad-3.0.0-rc2-prof-linux/scripts/Modify/../EAction.js:1162 <anonymous>(event = REntityPickEvent(0xbfdc3614), preview = true) at scripts/Modify/Trim/Trim.js:166 <anonymous>(event = REntityPickEvent(0xbfdc3614)) at /opt/qcad-3.0.0-rc2-prof-linux/scripts/Modify/../EAction.js:1237 <global>() at -1 326 trimmed1.trimStartPoint(is2); Uncaught exception at scripts/Modify/Trim/Trim.js:326: Error: :-1:-1: Wrong number/types of arguments for RArcEntity.trimStartPoint(). <native>(undefined) at -1 <anonymous>(op = RMixedOperation(0xec6fea8), limitingEntity = RLineEntityPointer(0×11830730), limitingShape = RLine(RShape(address: “0x10c1c988”), startPoint: RVector(36379.7, 46367.3, 0) , endPoint: RVector(40858.6, 44174.7, 0) ) , limitingPos = RVector(38065.4, 45591.8, 0) , trimEntity = RCircleEntityPointer(0xeee04a0), trimPos = RVector(37145, 45818.2, 0) , trimBoth = false, preview = true) at scripts/Modify/Trim/Trim.js:326 <anonymous>(preview = true) at scripts/Modify/Trim/Trim.js:186 <anonymous>() at /opt/qcad-3.0.0-rc2-prof-linux/scripts/Modify/../EAction.js:1162 <anonymous>(event = REntityPickEvent(0xbfdc3614), preview = true) at scripts/Modify/Trim/Trim.js:166 <anonymous>(event = REntityPickEvent(0xbfdc3614)) at /opt/qcad-3.0.0-rc2-prof-linux/scripts/Modify/../EAction.js:1237 <global>() at -1
|
|
461 | QCAD (main) | Bug Report | Medium | QCAD3 rc2 Opening DXF Created by 2.2.2 Block Position I ... | Closed | |
|
Task Description
When opening a DXF created by 2.2.2 the block entities are sometimes not being drawn in correct position and orientation.
The following is seen on the console (Which I think is related)
Debug: importing entities in block ' “Sw1pwo” ' Warning: RDwgBlockReferenceImporter::import: block reference references invalid block: “*X15”
and also (which is probably not related) Debug: importing entities in block ' “A$C6329746C” ' Warning: RSpline::updateFromControlPoints: not enough control points: 0 Warning: RSpline::getExploded: invalid spline Debug: RSpline: knotVector ignored Debug: RSpline: knots: 11 Debug: RSpline: order: 4 Debug: RSpline: controlPoints: 7 Warning: RSpline::updateFromControlPoints: not enough control points: 0 Warning: RSpline::getExploded: invalid spline Debug: RSpline: knotVector ignored Debug: RSpline: knots: 11 Debug: RSpline: order: 4 Debug: RSpline: controlPoints: 7
Drawing file shown.
This could be a bug in 2.2.2, but it would be nice to ensure 3 can pull in old drawings without us having to rework them all.
Any questions james at enrogen dot com.
James
|
|
452 | QCAD (main) | Bug Report | Medium | Printing issues OSX Lion | Closed | |
|
Task Description
When printing a drawing to A3 format on a Canon iX4000 in Qcad 3 RC2 the image is cropped when as if i am trying to print to a A4 page. Setting are correct, however. (I see a release candidate 3, but where can i download it? Checking versions confirm that i am up-to-date)
|
|
442 | QCAD (main) | Bug Report | Medium | Library incompatible licence | Closed | |
|
Task Description
Reading FS#441 I fired up the Library Browser, which works fine here, RC2 from tgz on Ubuntu 10.04, BTW.
The freedxf.com drawings “horseman” and two “women” claim to be “Creative Commons Attribution-NonCommercial-ShareAlike 3.0”. In my opinion, the “NonCommercial” clause does prohibit distribution in QCAD3, which is a commercial package. For a discussion see http://wiki.creativecommons.org/Defining_Noncommercial
|
|
435 | QCAD (main) | Bug Report | Medium | QCAD3 RC3 Windows XP - Stretch command does not appear ... | Closed | |
|
Task Description
The modify tools → stretch command does not appear to function.
The two attachments contain the source drawing (blackburne_engine_breather_0210A.dxf) and five screen shots (qcad3_rc3_stretch.odt) showing the steps taken to replicate the problem.
I have also performed a similar exercise with a Linux trial version 3.0 RC2 (OpenSuse 11.4) with the same result.
Regards
|
|
434 | QCAD (main) | Bug Report | Medium | filling wrong areas | Closed | |
|
Task Description
Hi,
qcad3 shows wrong filling of areas, see attached example in qcad3rc2 (wrong) vs. qcad2 (ok).
Regards - Stefan
|
|
414 | QCAD (main) | Bug Report | Medium | SEGFAULT on exit: RDocumentInterface::repaintViews() | Closed | |
|
Task Description
backtrace:
Thread [1] 5272 (Suspended : Signal : SIGSEGV:Segmentation fault)
memcpy() at 0xb5050d16
0xbe19918
QList<RGraphicsScene*>::detach_helper() at qlist.h:696 0x8ccb0b6
QList<RGraphicsScene*>::detach_helper() at qlist.h:710 0x8ccaef3
QList<RGraphicsScene*>::detach() at qlist.h:126 0x8f76f58
QList<RGraphicsScene*>::begin() at qlist.h:254 0x8f75f3c
RDocumentInterface::repaintViews() at RDocumentInterface.cpp:577 0x8f70e98
RDocumentInterface::mouseMoveEvent() at RDocumentInterface.cpp:634 0x8f7111e
RGraphicsScene::handleMouseMoveEvent() at RGraphicsScene.cpp:160 0x8f88ae7
RGraphicsView::handleMouseMoveEvent() at RGraphicsView.cpp:444 0x8f8b54a
RGraphicsViewQt::mouseMoveEvent() at RGraphicsViewQt.cpp:195 0x8e80bef
QWidget::event() at 0xb58da661
RGraphicsViewQt::event() at RGraphicsViewQt.cpp:104 0x8e80a6c
QApplicationPrivate::notify_helper() at 0xb5871d7c
QApplication::notify() at 0xb58772c4
QCoreApplication::notifyInternal() at 0xb547215b
QApplicationPrivate::sendMouseEvent() at 0xb5875152
0xb59066b5
QApplication::x11ProcessEvent() at 0xb5905d26
0xb5932f04
g_main_context_dispatch() at 0xb4aee509
0xb4aeed10
g_main_context_iteration() at 0xb4aeefce
QEventDispatcherGlib::processEvents() at 0xb54a2741
0xb5932a55
QEventLoop::processEvents() at 0xb547131d
QEventLoop::exec() at 0xb54715aa
QCoreApplication::exec() at 0xb5473701
qtscript_QCoreApplication_static_call() at 0xb08dc4b7
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xb083e0f4
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:790 0x87d5a26
RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:786 0x87d591f
RScriptHandler::init() at RScriptHandler.cpp:31 0x8fbbbc2
main() at main.cpp:256 0x87cf40a
|
|
410 | QCAD (main) | Bug Report | Medium | Grid preferred before enteties | Closed | |
|
Task Description
When I want to select in example a intersection or a endpoint, QCAD v3RC2 preferred to choose the grid not the intersection or the endpoint of enteties.
|
|
409 | QCAD (main) | Bug Report | Medium | cross-hatching is not possible in v2 drawings with v3 | Closed | |
|
Task Description
If you had created a drawing in v2, it is NOT possible do make cross-hatch in v3.
(the hatch will be made but it is not visible) → drawing example
|
|
395 | QCAD (main) | Bug Report | Medium | wrong text origin when pasting scaled text and graphics | Closed | |
|
Task Description
Text origins are not properly scaled when pasting text and graphics at a scale other than 1:1
|
|
394 | QCAD (main) | Bug Report | Medium | Scaling a drawing | Closed | |
|
Task Description
By scaling a drawing (base drawing) the text is OK in height but not in position
|
|
389 | QCAD (main) | Bug Report | Medium | Changes in "Shortcuts and Commands" are not storable... | Closed | |
|
Task Description
You can’t save changes in “Application Preferences > Shortcuts and Commands”! It works only for the current session - after a restart the settings are back on default
|
|
387 | QCAD (main) | Bug Report | Medium | Export to pdf fails if same file name used as one previ ... | Closed | |
|
Task Description
In File>PDF Export save a file with the same name in the same place as a previously saved pdf file.
Issue 1 Note that there is no alert to indicate that an attempt to overwrite is being made.
Then use the close preview button and navigate to the top panel file menu.
Issue 2 The usual drop down menu does not work. All other drop down menus do work.
|
|
385 | QCAD (main) | Bug Report | Medium | Text position of texts in blocks | Closed | |
|
Task Description
Text position of texts in blocks wrong.
|
|
381 | QCAD (main) | Bug Report | Medium | Multiple chice | Closed | |
|
Task Description
Multiple choice of enteties with “CTRL”+mouseclick is not possible
|
|
380 | QCAD (main) | Bug Report | Medium | Destroying cross-hatch | Closed | |
|
Task Description
By saving a drawing QCAD is destroying the cross-hatches
|
|
373 | QCAD (main) | Bug Report | Medium | QCAD3 does not open dxf-files containing ellipses | Closed | |
|
Task Description
QCAD3 does not open dxf-files containing ellipses! Error Message: Can’t open file, check fileformat, fileextension, accesrights
|
|
369 | QCAD (main) | Bug Report | Medium | "Edit Text" Function fails ... | Closed | |
|
Task Description
3 RC1b
Trying to edit a Text calls the Qt Script Debugger with following Message:
Uncaught exception at C:/Programme/QCAD 3rc1b/scripts/Draw/Text\TextDialog/TextDialog.js:170: ReferenceError: Can’t find variable: simpleText 170 simpleText.checked = textDataIn.isSimple();
I’m able to close the Script Debugger but I can’t edit the Text ....
|
|
349 | QCAD (main) | Bug Report | Medium | Cannot open saved files | Closed | |
|
Task Description
Hi Andrew
Using Beta 3 v3 saving files to DXf 2010, DWG 2010, or even 2007 only saves succesfully some times. Most of the time I get a warning dialog stating that “Cannot open file” - no suitable importer found?
Please help
Clive
|
|
344 | QCAD (main) | Feature Request | Medium | show warning if someone draws on locked layer | Closed | |
|
Task Description
|
|
343 | QCAD (main) | Bug Report | Medium | 2 drawings in print preview: inconsistencies | Closed | |
|
Task Description
load 2 drawings
switch both into print preview
see attachment
scale combo box shows only “1:1”
switching drawings does not update options tool bar from drawing but drawing from options tool bar
|
|
342 | QCAD (main) | Bug Report | Medium | SIGPIPE QPrinter::init() | Closed | |
|
Task Description
Thread [1] 18993 (Suspended : Signal : SIGPIPE:Broken pipe)
__kernel_vsyscall() at 0xffffe424
send() at 0xb517d5b8
0xacd3d8b2
httpFlushWrite() at 0xacd3dc21
0xacd3fcb8
cupsSendRequest() at 0xacd56470
cupsDoIORequest() at 0xacd56bc7
cupsDoRequest() at 0xacd56f0b
0xacd35d7f
cupsGetDests2() at 0xacd375d5
cupsGetDests() at 0xacd379a3
0xb5ad5153
0xb5a12133
0xb5a28344
0xb5a2b78c
QPrinter::init() at 0xb5a2d4ee
QPrinter::QPrinter() at 0xb5a2f01f
QtScriptShell_QPrinter::QtScriptShell_QPrinter() at 0xb02c9e29
qtscript_QPrinter_static_call() at 0xafe863ba
0xb6bd7f88
0xb6ac7c97
0xb6a91114
0xa95f7580
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,051 0x87d5f9d
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa970b87d
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,051 0x87d5f9d
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa9717387
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:786 0x87d4014
RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:782 0x87d3ef8
RScriptHandlerEcma::createActionDocumentLevel() at RScriptHandlerEcma.cpp:873 0x87d4677
RGuiAction::slotTrigger() at RGuiAction.cpp:628 0x8f7a23c
RGuiAction::qt_metacall() at moc_RGuiAction.cpp:86 0x8fc60a9
QMetaObject::metacall() at 0xb5478c83
QMetaObject::activate() at 0xb5489134
QAction::triggered() at 0xb5869d99
QAction::activate() at 0xb586b48f
QToolButton::nextCheckState() at 0xb5da52b2
0xb5cbb61f
QAbstractButton::mouseReleaseEvent() at 0xb5cbb8dc
QToolButton::mouseReleaseEvent() at 0xb5da53ac
QWidget::event() at 0xb58da629
QAbstractButton::event() at 0xb5cba7bf
QToolButton::event() at 0xb5da82ae
QApplicationPrivate::notify_helper() at 0xb5871d7c
QApplication::notify() at 0xb58772c4
QCoreApplication::notifyInternal() at 0xb547215b
QApplicationPrivate::sendMouseEvent() at 0xb5875152
0xb59066b5
QApplication::x11ProcessEvent() at 0xb5905d26
0xb5932f04
g_main_context_dispatch() at 0xb4aee509
0xb4aeed10
g_main_context_iteration() at 0xb4aeefce
QEventDispatcherGlib::processEvents() at 0xb54a2741
0xb5932a55
QEventLoop::processEvents() at 0xb547131d
QEventLoop::exec() at 0xb54715aa
QCoreApplication::exec() at 0xb5473701
qtscript_QCoreApplication_static_call() at 0xb08dc4b7
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xb100cf6b
0xb6a44262
0xb6a445f7
0xb6bb0f92
QScriptEngine::evaluate() at 0xb6bba46f
RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:786 0x87d4014
RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:782 0x87d3ef8
RScriptHandler::init() at RScriptHandler.cpp:31 0x8fa7476
main() at main.cpp:228 0x87cd9c9
|
|
341 | QCAD (main) | Bug Report | Medium | PrintPreview: Auto Fit Pages doesn't work as excepted | Closed | |
|
Task Description
load attached drawing
print preview
auto fit pages
shows 2 columns (wrong) and 13 rows (correct), see attachment
|