QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummary  ascStatusProgress
684QCAD (main)Feature RequestLowConfigurable behavior for using box selection with Shif...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180

 671 QCAD (main)Feature RequestLow Configurable icon size for top toolbars Closed
100%
Task Description

Configurable icon size for top toolbars

670QCAD (main)Feature RequestLowConfigurable rendering options for stacked textAssigned
0%
Task Description

Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript).
This may also apply to superscripts.

1324QCAD/CAMSuggestionVery LowConfusing Copy / Move optionAssigned
0%
Task Description

Hi,

Using the Copy and Move command the [ ] Use current layer and attributes’ is confusing.

Perhaps [ ] change copy /moved set to current layers and attributes. is more suitable.

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

 431 QCAD (main)Feature RequestLow Construction lines Closed
100%
4 Task Description

Construction lines (’infinite’ lines).

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
0%
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

 62 QCAD (main)Feature RequestVery Low Context Menu "Change preferences" Closed
100%
Task Description

Provide context menu that shows “Change preferences”

  1. opens the preference dialog
  2. shows the appropriate page

E.g. for

  • library browser (to set library sources)
  • graphics view (to set colors)
  • ruler (to set drawing unit)
 1370 QCAD (main)Bug ReportLow Context Menu suddenly stopped working ? Closed
100%
Task Description

Context Menu suddenly stopped working ?

Yep, tried everything I know of, can’t get it back.

 1695 QCAD (main)Bug ReportLow Context menu: editing tools not working in paper space Closed
100%
2 Task Description

Tools not working from context menu in paper space.

 1366 QCAD (main)Bug ReportLow Context Menu: Modify > Break Out Gap not working Closed
100%
Task Description

Using context Menu - Break Out Gap not working

 1444 QCAD (main)Bug ReportLow Context menu: no entry to delete polyline node for firs ...Closed
100%
Task Description

Context menu does not show an entry to “Delete Node” for the first node of a polyline.

 1619 QCAD (main)Bug ReportLow Context menu: relocating start point of selected polyli ...Closed
100%
Task Description

Select a polyline
Right click on it to show context menu
Set new position of start point
Tool stays active and does not properly terminate

503QCAD (main)Feature RequestLowConvert entities to points with a fixed distanceAssigned
0%
Task Description

Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.

See also forum at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834

 1089 QCAD/CAMBug ReportLow Convert polyline from segments on locked layers deletes ...Closed
100%
1 Task Description

If you select (line) segments in a visible yet locked layer and choose “convert segments to polyline” (OG), the segments are deleted, but inserting the polyline fails.
So you can easily destroy locked layers by mistake which contradicts the idea of locking layers.

 683 QCAD (main)Feature RequestLow Convert Spline to Polyline tool Closed
100%
Task Description

To have a tool that could convert splines to polylines would be useful, particularly for laser cutting work where a nice steady flow is needed, otherwise you can get an erratic ‘jumpy’ movement when cutting..
Maybe a ‘two’ step procedure;
1.First convert to arc/line segments.
2. Then if needed convert to a continuous polyline.

 253 QCAD (main)Bug ReportHigh coordinate input Closed
100%
Task Description

Coordinate input broken.

 954 QCAD (main)Bug ReportMedium Coordinates entered are interpreted as direct distance  ...Closed
100%
Task Description

Entering a coordinate (e.g. 20,20) results in direct distance entry instead (angle from relative zero to mouse pointer, length 20).

 36 QCAD (main)Bug ReportHigh Copy / Paste crashes Closed
100%
Task Description
  1. load the attached file
  2. select about 20 lines
  3. Ctrl-c
  4. Ctrl-v
qcad [C/C++ Application]	
	/home/martin/workspace/rsframework/debug/qcad [27492]	
		Thread [6] 27499 (Suspended : Container)	
		Thread [5] 27498 (Suspended : Container)	
		Thread [3] 27496 (Suspended : Container)	
		Thread [2] 27495 (Suspended : Container)	
		Thread [1] 27492 (Suspended : Signal : SIGABRT:Aborted)	
			__kernel_vsyscall() at 0xffffe424	
			raise() at 0xb4f037ff	
			abort() at 0xb4f05140	
			RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8e03412	
			qt_message_output() at 0xb5357f65	
			0xb53581ab	
			qFatal() at 0xb53582c9	
			qt_assert() at 0xb5358355	
			RExporter::exportEntity() at RExporter.cpp:514 0x8de759b	
			RDocumentInterface::previewOperation() at RDocumentInterface.cpp:1,789 0x8ddcc0d	
			<...more frames...>	
	gdb	
	qcad	
 155 QCAD (main)Bug ReportLow Copy / paste: convert units Closed
100%
Task Description

Copy / paste: convert units

- copy: copy drawing unit to clipboard
- paste: convert pasted entities from clipboard unit to drawing unit

 1032 QCAD (main)Bug ReportMedium Copy / paste: pasting copied block references results i ...Closed
100%
1 Task Description

- Copy two block references of block “circle” which contains one circle
- Paste into new, empty drawing
- Pasted block “circle” contains two circles

585QCAD (main)Bug ReportLowCopy & Paste Vorschau Proportionen passen nicht ...Assigned
0%
Task Description

Kopiere ich Bemaßungen/Leader in die Zwischenablage und möchte diese dann wieder in die Zeichnung einfügen passen die Vorschau Proportionen nicht mit dem eingefügten Ergebnis überein. Eigentlich nur ein Schönheitsfehler aber es erschwert die korrekte Positionierung und die benutzung der Optionen wie skalieren, rotieren etc ...

 1403 QCAD (main)Feature RequestLow Copy and Paste vectorpoint to built a spline in QCAD Closed
100%
Task Description

Would it be possible like in AutoCAD and Draftsight, to copy (from CSV or TXT) into the command line of qcad a table with
vectorpoint to built up a Spline in QCAD ?

Sample:
Spline
10.5,10(LR+CR)
20.8,20.4(LR+CR)

and so on

this text would than paste into the command line, and works like a macro.

Will be very helpful to generate a Spline where the vectorpoint had been calculated with for example “Excel”

1625QCAD (main)Feature RequestLowCopy LayerAssigned
0%
Task Description

Hi,

often I’m in the situation that I have to create an additional Layer mostly based on the settings from an already existing Layer. Just a question of organization. This new Layer has then everything identical except the name and one(?) Attribute. This could be that only the color or the Line weight deviates.

Example:

Existing Layer

Layer name: Lot 47 area existing

Attributes

Color: Red

Lineweight: 0.35

Linetype: Dashed


New Layer

Layer name: Lot 47 area proposal

Attributes

Color: Blue

Lineweight: 0.35

Linetype: Dashed

Unfortunately if done manually it happens in an blink of an eye that the human imperfection (me!) makes a mistake and (e.g.) a “Center (.5x)” finds it way into the Linetype Field instead of a “Center (.2x)” .... :-(

The workaround for a few User is to use in cases like this the Property Editor / General Property and customize single Attributes. In my opinion the first step to lose the control over your own drawing ...

A “Copy Layer” / Copy Layer Attributes” function would speed up this task and eliminate to a minimum the “human imperfection” factor.

I could imagine that a right click (like copy block) on the Layer triggers the “Add Layer” function and the dialog is already prefigured with the Settings of the Source Layer ...... ready for editing.
The new Layer itself is “empty” like any other new Layer.

579QCAD (main)Feature RequestLowCopy layers / blocksAssigned
0%
2 Task Description

Duplicate (copy, clone) a layer with or without entities on it. New name can be specified by user.

950QCAD (main)Feature RequestLowCopy properties from... / Copy attributes from...Assigned
0%
8 Task Description

See discussion at:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2614

 1413 QCAD (main)Bug ReportLow Copy/Paste from multiple DXF into file is impossible Closed
100%
Task Description

I have 3 DXF files and I want to merge them all into 1 single file, so I copy/paste the first, copy/paste the second but for the last it’s impossible because QCAD paste the wrong copy. More I try and more the result is weird

 470 QCAD (main)Bug ReportLow Copy/paste results in Z!=0 Closed
100%
Task Description

Split from  FS#465  by Stefan:

Copy+Paste with paste in a new drawing results in Z=-13.6... which caused the problems of pattern-hatch and select-impossible.

 1284 QCAD (main)Feature RequestLow Count up counter for consecutive number labeling Closed
100%
Task Description

please see below:

http://www.qcad.org/rsforum/viewtopic.php?f=107&t=3781

 56 QCAD (main)Bug ReportLow Courier font collision Closed
100%
Task Description

Rename Courier.cxf font, correct courier in imported QCAD 2 files

 312 QCAD (main)Bug ReportMedium Crash Closed
100%
Task Description

Pendant la création d’un plan le logiciel se bloque, puis une boite de dialogue Windows apparait : “QCAD a cessé de fonctionner”.
Après validation de la fenêtre le logiciel se ferme et toutes les modifications non enregistrées sont perdues.

When creating a plan software hang, then a dialog window appears: “QCad has stopped working”.
After validation of the software window is closed and all unsaved changes are lost.

 658 QCAD (main)Bug ReportLow crash if file is write (!) only Closed
100%
Task Description

Opening a file which is (by accident) write only results in QCad crashing. Read only or read/write files are opened without problems.

As write only files do not make much sense, this should not come up too often...

 872 QCAD (main)Bug ReportMedium Crash in dwg2svg Closed
100%
Task Description

Conversion of certain files leads to crashes (segmentation fault).

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2501

 478 QCAD (main)Bug ReportHigh crash on "Draw" - "Insert Bitmap" Closed
100%
Task Description

Selecting “Draw” and “Insert Bitmap” from the menu shows file dialog “Import Bitmap” for a split second and then crashes completely with segmentation fault.

Running Ubuntu Linux 10.04 LTS with QCad3 rc2.

Console output:
Debug: updateScenes...
Debug: updateGuiActions...
Debug: notifyListenersSlot...
Warning: RScriptHandlerEcma::createActionDocumentLevel(): “scripts/Snap/RestrictOff/RestrictOff.js” : Engine is busy. Aborting...
Warning: RScriptHandlerEcma::createActionDocumentLevel(): “scripts/Snap/SnapAuto/SnapAuto.js” : Engine is busy. Aborting...
/opt/qcad-3.0.0-rc2-prof-linux/qcad: line 35: 5905 Segmentation fault LD_LIBRARY_PATH=”$DIR” “$binary” $OPT1 $OPT2 “$@”

 1644 QCAD (main)Bug ReportLow Crash on hide all layers button / mixed layers of diffe ...Closed
100%
2 Task Description

Hi!

it occorred to me now several times, that I have been working on 2 or more files simultaneously when suddenly on some operations layers from one file showed up in the other file. nothing was pasted when it happened just many files open, or few files with many layers in them. (about 100 layers, but sometimes also only 10 layers)
Today I disabled a single layer in one dxf (A) which caused all layers of the other dxf (B) to show up in the layer list (and the layers that should show up were all gone).

I knew this already from 2 more occurances and tried the best to undo all my changes in (A) before “emergency saving” (A). I closed one of the two dxf files (A), leaving one open (B). Everthing seemed pretty normal again. Then pressing the “hide all layers” button just crashed qcad without any message. That crash on “hide all layers” happened twice today). I can’t reproduce the crash right now, but will add details here when I find something. As far as I remember the bug occured already in qcad 3.17, but I’m now on 3.18.1

thanks :)
Martin

 1076 QCAD/CAMBug ReportHigh Crash on Mac OS X when using internal Trackpad Closed
100%
1 Task Description

Hi,

I have just updated my Mac OS from 10.9.2 to 10.9.4. QCAD 3.6.2 seems to be working normally under the newest version of Mac OS, but has developed a very specific bug which leads to reproducible crashes when a text object is edited.

Steps to minimally reproduce:
1. Open QCAD
2. Create a text object
3. Place the text object on the canvas
4. double-click the text object and edit its contents
5. click OK to accept changes
6. repeat from step 4 three or four times.

After several attempts to edit a text object, QCAD will crash with EXC_BAD_ACCESS (SIGBUS) in thread 0 (QCoreApplication).
The crash can also be triggered by moving the text object around on the canvas (instead of editing its contents).
The bug does not require anything else (no other objects on the canvas, no particular font, occurs in both new and previously saved documents).

Apart from this bug, QCAD seems to work fine on OS X 10.9. The text editing crash did not occur before the latest OS update. No other applications on my system seem to be having any problems. If this problem can be fixed, I think QCAD will be quite usable on 10.9.

See also related bugs in:
 FS#1091 

 653 QCAD (main)Bug ReportMedium crash on some file operations may be Qt related Closed
100%
Task Description

On file open selection from main menu or on output to PDF Qcad crashes

error:

I/O error : No such file or directory
/usr/share/mime/inode/directory.xml:1: parser error : Extra content at the end of the document

 904 QCAD (main)Bug ReportHigh Crash when inserting some blocks from part library Closed
100%
Task Description

Tested on Linux Mint-64
Inserting some exsisting blocks or newly user created blocks makes QCAD quit!
Permissions were checked and also tested by submitting new blocks to new folder...but problem remains.
See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8387#p8387

 1179 QCAD (main)Bug ReportCritical Crash when opening empty file Closed
100%
Task Description

Files which don’t contain any entities cannot be loaded (bulk load of spatial index library fails with exception).

 509 QCAD (main)Bug ReportLow Crash when resizing command line size Closed
100%
Task Description

Crash in QVariantAnimation.

Potential fix: configure Qt with -D QT_NO_ANIMATION

TODO: check on other platforms

 1017 QCAD (main)Bug ReportMedium crash when saving file with block attributes Closed
100%
Task Description

Hey,

QCAD crashes when saving a drawing that has a block attribute added.
This happens both with a block and the exploded version of the block.

Please find attached the system info, as well as an example drawing.
In this drawing, there are three boxes. The lower 2 boxes are intended to contain text attributes.

Output from the command line:
metastable@metastable:~/opt/qcad-3.4.5-pro-linux-x86_32$ ./qcad
Debug: RDxfPlugin::init
Debug: RHelpPlugin::init
Debug: RProScriptsPlugin::init
Debug: TIMER: 90 ms - “loading add-ons”
Debug: TIMER: 781 ms - “initializing add-ons”
Debug: checking for updates...
Warning: QSslSocket: cannot resolve SSLv2_client_method
Warning: QSslSocket: cannot resolve SSLv2_server_method
Debug: no updates available
Debug: checking for updates...
Debug: no updates available
Debug: RPluginBase: postInit: “DWG”
Debug: RPluginBase: postInit: “Pro Tools”
Debug: code page: 30
Debug: autosave skipped [08:54:14]: no modifications
./qcad: line 18: 3850 Segmentation fault (core dumped) LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “$@”

Kind regards,

Stijn

 1492 QCAD (main)Bug ReportHigh Crash when selecting polygon Closed
100%
Task Description

When trying to select the innermost square (created as a polygon) - Qcad immediately crashes.

Selection can be either a box select or by clicking on the polygon.

This happened with the latest (3v15.5.0) QCAD/CAM Pro on Linux
I have not attempted to verify problem on windows.

 1544 QCAD (main)Bug ReportLow Crash when selecting spline Closed
100%
Task Description

This is an interesting bug on my machine. The attached file crashes on 3.15.5, works perfectly well on 3.11.0 and 3.7.5

To see the problem open the file and click on the upper spline. QCAD disappears.

dajo

 1293 QCAD/CAMBug ReportMedium Crash when snapping to intersection points between 3d l ...Closed
100%
Task Description

I have a file that makes QCAD crash. I’ve been editing this design across different versions of QCAD over time and this is the first time I have a problem with it.

Steps to reproduce:
Open the attached file and try to add some entities or dimensions to it (you may need to create large ones since it seems to depend on the zoom factor; for example a very large ellipse). After a freeze of a few seconds QCAD will quit.

The attached file is a simplified version from which I deleted a number of entities; on the original I can’t do anything – QCAD crashes as soon as I try to create any object.

Cause: 3D lines with x1==x2, y1==y2 but z1!=z2

 1283 QCAD (main)Bug ReportHigh Crash when snapping to intersection points between zero ...Closed
100%
1 Task Description

Create spline through point P.
Create zero length line at P.
Snap to P → crash.

 142 QCAD (main)Bug ReportHigh Crash when staring QCAD with LibraryBrowser module Closed
100%
Task Description

QCAD crashes directly after start (when all plugins have been loaded) with a “Bus Error” or segmentation fault in approximately 90% of all starts with the LibraryBrowser module. Without modules

  • scripts/Widgets/LibraryBrowser
  • scripts/Tools/LibraryTranslator
  • scripts/Developer/BookImages
  • scripts/Developer/UiTest/LibraryBrowserTest
  • scripts/Developer/UiTest/LibraryBrowserTest2

no crashes occur.

Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
0   QtGui                         	0x0349d27b QWidgetPrivate::showChildren(bool) + 235
1   QtGui                         	0x0349d38b QWidgetPrivate::show_helper() + 107
2   QtGui                         	0x0349d2b9 QWidgetPrivate::showChildren(bool) + 297
3   QtGui                         	0x0349d38b QWidgetPrivate::show_helper() + 107
4   QtGui                         	0x034a13c3 QWidget::setVisible(bool) + 1075
5   QtGui                         	0x0349fd7a QWidget::qt_metacall(QMetaObject::Call, int, void**) + 1098
6   QtGui                         	0x03abf6a5 QMainWindow::qt_metacall(QMetaObject::Call, int, void**) + 53
7   com.ribbonsoft.qcad           	0x007d31c7 RMainWindowQt::qt_metacall(QMetaObject::Call, int, void**) + 45
8   QtScript                      	0x05aa79db QScript::callQtMethod(QTJSC::ExecState*, QMetaMethod::MethodType, QObject*, QTJSC::ArgList const&, QMetaObject const*, int, bool) + 11595
9   QtScript                      	0x05aab60e QScript::QtFunction::execute(QTJSC::ExecState*, QTJSC::JSValue, QTJSC::ArgList const&) + 174
10  QtScript                      	0x05aab900 QScript::QtFunction::call(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::JSValue, QTJSC::ArgList const&) + 224
11  QtScript                      	0x059aec41 QTJSC::NativeFuncWrapper::operator()(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::JSValue, QTJSC::ArgList const&) const + 113
12  QtScript                      	0x05983e99 cti_op_call_NotJSFunction + 489
13  ???                           	0x1a761a65 0 + 443947621
14  QtScript                      	0x0593b427 QTJSC::Interpreter::execute(QTJSC::EvalExecutable*, QTJSC::ExecState*, QTJSC::JSObject*, int, QTJSC::ScopeChainNode*, QTJSC::JSValue*) + 1031
15  QtScript                      	0x0593b721 QTJSC::Interpreter::execute(QTJSC::EvalExecutable*, QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::ScopeChainNode*, QTJSC::JSValue*) + 97
16  QtScript                      	0x05a68cb6 QScriptEnginePrivate::evaluateHelper(QTJSC::ExecState*, long, QTJSC::EvalExecutable*, bool&) + 582
17  QtScript                      	0x05a69511 QScriptEngine::evaluate(QString const&, QString const&, int) + 801
18  com.ribbonsoft.qcad           	0x0003589b RScriptHandlerEcma::eval(QString const&, QString const&) + 57
19  com.ribbonsoft.qcad           	0x000357f1 RScriptHandlerEcma::doScript(QString const&, QStringList const&) + 805
20  com.ribbonsoft.qcad           	0x00923a19 RScriptHandler::init(QString const&, QStringList const&) + 641
21  com.ribbonsoft.qcad           	0x0002d51f main + 2417 (main.cpp:172)
22  com.ribbonsoft.qcad           	0x0002c909 _start + 208
23  com.ribbonsoft.qcad           	0x0002c838 start + 40
 109 QCAD (main)Bug ReportLow Crash when start in Ubuntu 11.04 x64 Closed
100%
Task Description

Hi, when strat Qcad3 first time and close the info window, the software crash. I copy the command line:

$ '/home/gabriel/Descargas/qcad-3.0.0-tp1-prof-linux/qcad' 
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:3211): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:3211): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:3211): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:3211): Gtk-WARNING **: Loading IM context type 'ibus' failed

(<unknown>:3211): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:3211): Gtk-WARNING **: Loading IM context type 'ibus' failed
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:3211): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:3211): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:3211): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:3211): Gtk-WARNING **: Loading IM context type 'ibus' failed
CWD set to:  "/home/gabriel/Descargas/qcad-3.0.0-tp1-prof-linux" 
library path:  "/home/gabriel/Descargas/qcad-3.0.0-tp1-prof-linux/plugins" 
Debug:    Init script plugins... 
Warning:  MDI child is NULL 
Warning:  MDI child is NULL 
Warning:  RGuiAction::getByScriptFile: no action found: "scripts/Snap/Coordinate/Coordinate.js" 
Debug:    Hatch.init 
Debug:    Text.init 
Debug:    TIMER:  1492 ms -  "loading and initializing plugins" 
Warning:  RScriptHandlerEcma::doScript: engine busy: aborting evaluation of script: 

 "scripts/File/New/New.js" 

 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    Creating storage... 
Debug:    Creating spatial index... 
Debug:    Creating document... 
Debug:    Creating MDI child... 
Debug:    Initialize Viewports... 
Debug:    Init graphics view... 
Debug:    Init scrollbars... 
Debug:    Init rulers... 
Debug:    Init idle and default actions... 
Debug:    Show MDI child... 
Debug:    Init event handler... 
Debug:    Setting auto snap... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
/usr/lib/gio/modules/libgiobamf.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiobamf.so
/usr/lib/gio/modules/libgvfsdbus.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so

(<unknown>:3211): Gtk-WARNING **: Error loading theme icon 'window-close' for stock: No se ha podido cargar el módulo de carga de imágenes: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: clase ELF errónea: ELFCLASS64

(<unknown>:3211): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed

** (<unknown>:3211): CRITICAL **: murrine_style_draw_render_icon: assertion `base_pixbuf != NULL' failed

(<unknown>:3211): Gtk-CRITICAL **: IA__gtk_style_render_icon: assertion `pixbuf != NULL' failed

(<unknown>:3211): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_pixels: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:3211): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_width: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:3211): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion `GDK_IS_PIXBUF (pixbuf)' failed
Segmentation fault
gabriel@gabriel-Studio-1558:~/Descargas/qcad-3.0.0-tp1-prof-linux$ '/home/gabriel/Descargas/qcad-3.0.0-tp1-prof-linux/qcad' 
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:3380): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:3380): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:3380): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:3380): Gtk-WARNING **: Loading IM context type 'ibus' failed

(<unknown>:3380): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:3380): Gtk-WARNING **: Loading IM context type 'ibus' failed
/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:3380): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so

/usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so: clase ELF errónea: ELFCLASS64

(<unknown>:3380): Gtk-WARNING **: Failed to load type module: /usr/lib/gtk-2.0/2.10.0/menuproxies/libappmenu.so


(<unknown>:3380): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/immodules/im-ibus.so: clase ELF errónea: ELFCLASS64

(<unknown>:3380): Gtk-WARNING **: Loading IM context type 'ibus' failed
CWD set to:  "/home/gabriel/Descargas/qcad-3.0.0-tp1-prof-linux" 
library path:  "/home/gabriel/Descargas/qcad-3.0.0-tp1-prof-linux/plugins" 
Debug:    Init script plugins... 
Warning:  MDI child is NULL 
Warning:  MDI child is NULL 
Warning:  RGuiAction::getByScriptFile: no action found: "scripts/Snap/Coordinate/Coordinate.js" 
Debug:    Hatch.init 
Debug:    Text.init 
Debug:    TIMER:  1520 ms -  "loading and initializing plugins" 
Warning:  RScriptHandlerEcma::doScript: engine busy: aborting evaluation of script: 

 "scripts/File/New/New.js" 

 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Debug:    Creating storage... 
Debug:    Creating spatial index... 
Debug:    Creating document... 
Debug:    Creating MDI child... 
Debug:    Initialize Viewports... 
Debug:    Init graphics view... 
Debug:    Init scrollbars... 
Debug:    Init rulers... 
Debug:    Init idle and default actions... 
Debug:    Show MDI child... 
Debug:    Init event handler... 
Debug:    Setting auto snap... 
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
Warning:  QScriptEngine::newVariant(): changing class of non-QScriptObject not supported
/usr/lib/gio/modules/libgiobamf.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgiobamf.so
/usr/lib/gio/modules/libgvfsdbus.so: clase ELF errónea: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so

(<unknown>:3380): Gtk-WARNING **: Error loading theme icon 'window-close' for stock: No se ha podido cargar el módulo de carga de imágenes: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: clase ELF errónea: ELFCLASS64

(<unknown>:3380): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed

** (<unknown>:3380): CRITICAL **: murrine_style_draw_render_icon: assertion `base_pixbuf != NULL' failed

(<unknown>:3380): Gtk-CRITICAL **: IA__gtk_style_render_icon: assertion `pixbuf != NULL' failed

(<unknown>:3380): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_pixels: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:3380): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_width: assertion `GDK_IS_PIXBUF (pixbuf)' failed

(<unknown>:3380): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion `GDK_IS_PIXBUF (pixbuf)' failed
Segmentation fault
 1658 QCAD (main)Bug ReportHigh Crash when switching to layout block (32bit Linux, Qt4) Closed
100%
Task Description

Affects 32bit Linux when compiled against Qt4 (legacy platform release).

 1018 QCAD (main)Bug ReportMedium Crash when using Draw > Polyline > Trim Segments Closed
100%
Task Description

Draw > Polyline > Trim Segments crashes if QCAD is compiled using gcc 4.2.1 which is the case for the Mac OS X package.

 74 QCAD (main)Bug ReportLow Crash while generating example drawings  Closed
100%
Task Description

openSUSE 11.4, 32bit

Most likely occurred while getting printer information.
Possibly connected to switching desktops while script was running.

Linux: 2011-05-11 16.08:09 RGraphicsViewQt::decorateBackground()

Thread [1] 10040 (Suspended : Signal : SIGPIPE:Broken pipe)	
	__kernel_vsyscall() at 0xffffe424	
	send() at 0xb51825b8	
	0xa95298b2	
	httpFlushWrite() at 0xa9529c21	
	0xa952bcb8	
	cupsSendRequest() at 0xa9542470	
	cupsDoIORequest() at 0xa9542bc7	
	cupsDoRequest() at 0xa9542f0b	
	0xa9521d7f	
	cupsGetDests2() at 0xa95235d5	
	cupsGetDests() at 0xa95239a3	
	0xb5ad5153	
	0xb5a12133	
	0xb5a28344	
	0xb5a2b78c	
	QPrinter::init() at 0xb5a2d4ee	
	QPrinter::QPrinter() at 0xb5a2f01f	
	QtScriptShell_QPrinter::QtScriptShell_QPrinter() at 0xb0489e29	
	qtscript_QPrinter_static_call() at 0xb00463ba	
	0xb6bd7f88	
	0xb6ac7c97	
	0xb6a91114	
	0xa9582390	
	0xb6a423e3	
	0xb6af06e0	
	0xb6ac201e	
	0xb6be0cd3	
	0xb6be11a9	
	QMetaObject::metacall() at 0xb5478c83	
	QMetaObject::activate() at 0xb5489134	
	RGraphicsViewQt::decorateBackground() at moc_RGraphicsViewQt.cpp:121 0x8cfbcc6	
	RGraphicsViewQt::paintDocument() at RGraphicsViewQt.cpp:510 0x8cee2e5	
	RGraphicsViewQt::paintEvent() at RGraphicsViewQt.cpp:216 0x8cec909	
	QWidget::event() at 0xb58da67d	
	RGraphicsViewQt::event() at RGraphicsViewQt.cpp:796 0x8cef99e	
	QApplicationPrivate::notify_helper() at 0xb5871d7c	
	QApplication::notify() at 0xb5875b64	
	0xb693e301	
	QInternal::activateCallbacks() at 0xb5356dd3	
	QCoreApplication::notifyInternal() at 0xb5472123	
	QWidgetPrivate::drawWidget() at 0xb58d400d	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d4b42	
	QWidgetPrivate::drawWidget() at 0xb58d3d1f	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d4b42	
	QWidgetPrivate::drawWidget() at 0xb58d3d1f	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d4b42	
	QWidgetPrivate::drawWidget() at 0xb58d3d1f	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d4b42	
	QWidgetPrivate::drawWidget() at 0xb58d3d1f	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d4b42	
	QWidgetPrivate::drawWidget() at 0xb58d3d1f	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d4b42	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::drawWidget() at 0xb58d3d1f	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d4b42	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::paintSiblingsRecursive() at 0xb58d49fc	
	QWidgetPrivate::drawWidget() at 0xb58d3d1f	
	0xb5acfffe	
	QWidgetPrivate::syncBackingStore() at 0xb58ca7e2	
	QWidget::event() at 0xb58daf74	
	QMainWindow::event() at 0xb5d2c6d5	
	RMainWindowQt::event() at RMainWindowQt.cpp:532 0x8cf54c3	
	QApplicationPrivate::notify_helper() at 0xb5871d7c	
	QApplication::notify() at 0xb5875b64	
	QCoreApplication::notifyInternal() at 0xb547215b	
	QCoreApplicationPrivate::sendPostedEvents() at 0xb5473457	
	QCoreApplication::sendPostedEvents() at 0xb547363d	
	0xb54a2344	
	g_main_context_dispatch() at 0xb4af3509	
	0xb4af3d10	
	g_main_context_iteration() at 0xb4af3fce	
	QEventDispatcherGlib::processEvents() at 0xb54a2741	
	0xb5932a55	
	QCoreApplication::processEvents() at 0xb54738e9	
	0xb6930965	
	QScriptEngineAgentPrivate::atStatement() at 0xb6bc297b	
	0xb6a41232	
	0xb6a8d39a	
	0xa8c5fbee	
	0xb6a423e3	
	0xb6af06e0	
	0xb6ac201e	
	QScriptValue::call() at 0xb6bd2e67	
	REcmaShellActionAdapter::beginEvent() at REcmaShellActionAdapter.cpp:149 0x8b897be	
	RScriptHandlerEcma::createActionApplicationLevel() at RScriptHandlerEcma.cpp:821 0x87641c2	
	RScriptHandler::triggerActionApplicationLevel() at RScriptHandler.cpp:52 0x8e15c44	
	RGuiAction::slotTrigger() at RGuiAction.cpp:587 0x8dea719	
	RGuiAction::qt_metacall() at moc_RGuiAction.cpp:86 0x8e32de1	
	QMetaObject::metacall() at 0xb5478c83	
	QMetaObject::activate() at 0xb5489134	
	QAction::triggered() at 0xb5869d99	
	QAction::activate() at 0xb586b48f	
	0xb5d550c0	
	0xb5d5b485	
	QMenu::mouseReleaseEvent() at 0xb5d5d65d	
	QtScriptShell_QMenu::mouseReleaseEvent() at 0xb0432feb	
	QWidget::event() at 0xb58da629	
	QMenu::event() at 0xb5d5aec4	
	QtScriptShell_QMenu::event() at 0xb043621b	
	QApplicationPrivate::notify_helper() at 0xb5871d7c	
	QApplication::notify() at 0xb58772c4	
	QCoreApplication::notifyInternal() at 0xb547215b	
	QApplicationPrivate::sendMouseEvent() at 0xb5875152	
	0xb59068fc	
	QApplication::x11ProcessEvent() at 0xb5905d26	
	0xb5932f04	
	g_main_context_dispatch() at 0xb4af3509	
	0xb4af3d10	
	g_main_context_iteration() at 0xb4af3fce	
	QEventDispatcherGlib::processEvents() at 0xb54a2741	
	0xb5932a55	
	QEventLoop::processEvents() at 0xb547131d	
	QEventLoop::exec() at 0xb54715aa	
	QCoreApplication::exec() at 0xb5473701	
	qtscript_QCoreApplication_static_call() at 0xb0a9c4b7	
	0xb6bd813c	
	0xb6ac1f68	
	0xb6a9164c	
	0xb11c9f5c	
	0xb6a44262	
	0xb6a445f7	
	0xb6bb0f92	
	QScriptEngine::evaluate() at 0xb6bba46f	
	RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:677 0x876330c	
	RScriptHandler::init() at RScriptHandler.cpp:31 0x8e15a46	
	main() at main.cpp:151 0x875d23d	
Showing tasks 301 - 350 of 1769 Page 7 of 36<<First - 5 - 6 - 7 - 8 - 9 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing