QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
 904 QCAD (main)Bug ReportHigh Crash when inserting some blocks from part library Closed
100%
Task Description

Tested on Linux Mint-64
Inserting some exsisting blocks or newly user created blocks makes QCAD quit!
Permissions were checked and also tested by submitting new blocks to new folder...but problem remains.
See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8387#p8387

 1043 QCAD (main)Bug ReportHigh QCAD 3.4.7 pro crash Closed
100%
Task Description

Hello!

intensive work in QCAD 3.4.7 pro leads to crash it after 30-40 minutes.

Console output (OS Debian jessie):

Could not allocate register file: 12
./qcad: line 18: 6266 Segmentation fault LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “$@”

 1076 QCAD/CAMBug ReportHigh Crash on Mac OS X when using internal Trackpad Closed
100%
1 Task Description

Hi,

I have just updated my Mac OS from 10.9.2 to 10.9.4. QCAD 3.6.2 seems to be working normally under the newest version of Mac OS, but has developed a very specific bug which leads to reproducible crashes when a text object is edited.

Steps to minimally reproduce:
1. Open QCAD
2. Create a text object
3. Place the text object on the canvas
4. double-click the text object and edit its contents
5. click OK to accept changes
6. repeat from step 4 three or four times.

After several attempts to edit a text object, QCAD will crash with EXC_BAD_ACCESS (SIGBUS) in thread 0 (QCoreApplication).
The crash can also be triggered by moving the text object around on the canvas (instead of editing its contents).
The bug does not require anything else (no other objects on the canvas, no particular font, occurs in both new and previously saved documents).

Apart from this bug, QCAD seems to work fine on OS X 10.9. The text editing crash did not occur before the latest OS update. No other applications on my system seem to be having any problems. If this problem can be fixed, I think QCAD will be quite usable on 10.9.

See also related bugs in:
 FS#1091 

 1091 QCAD (main)Bug ReportHigh Qcad-Pro 3.6.3 Repeatable crash when using mirror tool  ...Closed
100%
Task Description

Under OS X 10.9.4 I often experiencing a crash with QCad-Pro 3.6.3 when using the mirror tool. It’s repeatable to roughly 90% , just do it a few times and it will crash.

In this report I have included the crash trace from OS X as well as a simple example DXF file (a house gate) which can be used to repeat the crash. Just do a vertical mirroring a few times and the crash will happen.

It usually happens more if you choose “Keep original”

While not quite a showstopper I would consider this something that really needs fixing ASAP as it could mean data loss (which happened to me).

 1135 QCAD (main)Bug ReportHigh Minimally reproducible segfault when moving a leader in ...Closed
100%
Task Description

Hi,

I have a nice minimally reproducible bug on QCAD v3.7.4 on Mac OS X 10.9.5 (Mavericks).
QCAD will segfault whenever I take the following steps:

1. Open a new document
2. Create a leader object (D,E) in the default ‘0’ layer. Leave its style and color defined by the layer, as per default.
3. Create a new layer, with a non-default line style or color. The line weight & layer name do not matter.
4. Select the leader object previously create
5. Open the property editor and assign the object to the new layer just created.
Every time, this will cause QCAD to segfault on my machine. The crash report is attached.

Another minimally reproducible path to the same error is to do the following:
1. Open a new document
2. Create a leader object (D,E) in the default ‘0’ layer. Give it a custom color and line style that over-ride the layer defaults.
3. Create a new layer, with a non-default line style or color. The line weight & layer name do not matter.
4. Select the leader object previously created.
5. Open the property editor and assign the object to the new layer just created.
6. Still in the property editor, switch the leader object’s color back to ‘By Layer’.
The same segfault will occur.

It seems that the crash is triggered by the action of changing a leader object’s color (and/or line style) in a manner that requires the object to check the containing layer’s default color and style. You can achieve this by either changing the object’s layer, or switching the color and style from being custom defined to ‘by layer’, as long as the selection requires the line’s appearance to change.

Any thoughts? My machine’s crash report is attached.

Dan

 1137 QCAD/CAMBug ReportHigh segfault creating dashed spline (without addons) Closed
100%
Task Description

Hello,

This is my first real bug report so please advise how i could provide more useful information.

I am not certain if the severity is correct.

The bug: segfault when creating a spline with a dashed linetype or opening a file containing one.

The bug isn’t present with the dwg extension installed

Steps to reproduce:
1. create drawing
2. create spline
3. set linetype to dashed
4. crash

 1145 QCAD (main)Bug ReportHigh Closing inactive tab of a modified drawing: drawing fil ...Closed
100%
Task Description

Steps to reproduce:

1. Create new drawing and fill it with some contents that’s easy to distinguish, for example text “DRAWING 1”.
2. Save it as dr1.dxf
3. Close it
4. Open dr1.dxf
5. Edit it, for example change text from “DRAWING 1” to “DRAWING 2” 6. Save changed file as dr2.dxf
7. Close it
8. Open dr1.dxf (it should have content “DRAWING 1”)
9. Open dr2.dxf (it should have content “DRAWING 2”)
10. Close tab dr1.dxf
10.1 Qcad will ask you to save changes.
10.2 Press “Yes” –> nothing happens, dialog doesn’t disappear.
10.3 Press “Discard” –> dialog disappears, tab gets closed
10.4 Tab that has content of file dr2.dxf (”DRAWING 2”) remains open but gets title “dr1.dxf” (!)
11. Close tab
12. Press “Yes” in dialog that asks to save changes

Results:
1. Open dr1.dxf
2. Open dr2.dxf
As you can see, both files have equal contents (”DRAWING 2”)

Expected results:

1. Files have their own contents.
2. Dialogs asking to save files disappear when checking “Yes”, “Cancel” or “Discard” 3. Tabs don’t change titles and associated file names when other tabs are closed.

 1177 QCAD (main)Bug ReportHigh Bugs on Win 7- 64bit Closed
100%
Task Description

Just installed (31 jan 2015) on Win 7 64 bit. Two bugs are immediately apparent...

 bug 1 : Network drives are not listed in the file open or import dialogs - no way to access files stored on networked drives. (This is not a windows configuration error- all my other apps work perfevtly ok.)

 bug 2 : After about 5 minutes of initial exploration immediately after installation a window pops up... Trial Expired: The trial add-on CAM is no longer active (restart required).

Note: I do have neither of these problems on Windows XP (32 bit) which I installed yesterday

 1217 QCAD (main)Bug ReportHigh Modify > Explode: crash for non-explodable entities Closed
100%
Task Description

- Select line
- Modify > Explode

 1249 QCAD (main)Bug ReportHigh QCAD makes USB stick read only Closed
100%
Task Description

After the first time I have saved a file from QCAD to the USB stick, the USB stick becomes read only.

Highly inconvenient as one then needs to copy over the data and format it again.

 1280 QCAD (main)Bug ReportHigh Dimension > Leader: crash when attempting to draw leade ...Closed
100%
Task Description

- Create new empty drawing
- Make layer 0 invisible or lock it
- Dimension > Leader
- Set start point

 1283 QCAD (main)Bug ReportHigh Crash when snapping to intersection points between zero ...Closed
100%
1 Task Description

Create spline through point P.
Create zero length line at P.
Snap to P → crash.

 1286 QCAD (main)Bug ReportHigh Canvas flickers/flashes white when scrolling. Closed
100%
Task Description

When scrolling quickly, the entire canvas flashes white (some kind of video buffer issue?). This includes the rulers, but excludes the scroll bars and the corner fillet at the top-left between the two rulers. Frequency of flicker is linked to speed too - the more you scroll the fast the flicker.

I’ve marked the severity high - obviously this is not a functional problem, but the strobe effect is causing headaches and may have negative affects for people with illnesses triggered by flashing light. Even with the background set to white, the flashing is still severe - when the background is set to black, it’s unbearable.

Using a Mac Pro (10.10.3) with AMD FirePro D300 2048 MB graphics and dual displays. Happens on either of the displays. Was using an August 2013 build with the issue - just upgraded to latest build and have same issue. Didn’t experience this on previous/older Mac Pro (running 10.8), so suspect it’s an issue with hardware or OS version?

 1322 QCAD/CAMBug ReportHigh Fonts mixed up witch code tables Closed
100%
Task Description

Hi,

In ‘Application preferences, Draw, Text’ fonts can be selected.

There is a mixing up between fonts (the appearance of characters on screen) and code tables (what digital code is used for each character).

‘ISO8859-11’ is the 8 bit Thai (!) code table and not a font
‘Unicode’ is the 16 bit code table and not a font.

For downward comptability QCAD should use default font Standard (ISO3098) with code table ISO8859-1 (US-ASCII Latin-1).

 1331 QCAD (main)Bug ReportHigh QCAD cannot be launched, application preferences incomp ...Closed
100%
Task Description

Missing file Qt5XmlPatterns.dll in Windows 64bit release.

 1354 QCAD (main)Bug ReportHigh 64 bit version crashes on Save or Save As command Closed
100%
Task Description

I just installed 3.12.5.0 (3.12.5) on a Dell Latitude E7250 (8GB RAM, i7-56000 CPU, 2.6GHz, Win 7 Pro 64 bit OS).

Started working my way through the user manual, tried to save a new file as ‘example’ and QCAD (64 bit Pro) crashed. Tried a few times with Save and Save As, empty files and a simple rectangle and it crashed every time.

Removed and re-installed the 64 bit version - same problem

Downloaded, installed 32 bit version as work around - works fine

 1450 QCAD (main)Bug ReportHigh File > Save: Invalid Symbol Table Name Closed
100%
Task Description

Opens an Autocad .dwg file happily (Pro version x64). Allows you to make changes, when you go to save (or save as), you get the “Invalid symbol table name”.

It should figure this out when file is opened and squawk immediately.

Would be extremely useful to get some additional error details that might allow one to diagnose and fix the problem. i.e. “Invalid symbol table name: _” with the name of the offender.

I tried removing unused blocks, no joy.

 1492 QCAD (main)Bug ReportHigh Crash when selecting polygon Closed
100%
Task Description

When trying to select the innermost square (created as a polygon) - Qcad immediately crashes.

Selection can be either a box select or by clicking on the polygon.

This happened with the latest (3v15.5.0) QCAD/CAM Pro on Linux
I have not attempted to verify problem on windows.

 1536 QCAD (main)Bug ReportHigh Draw > Polyline > Delete Node(s): crash when deleting 2 ...Closed
100%
Task Description

QCAD crashes when you perform the following operations:

1. Create Polyline with just one segment.  
2. Delete the node with DELETE NODE(S) command.  
3. Press ESC several times.
(-> QCAD crashes..)
 1560 QCAD (main)Bug ReportHigh Main menu not selectable (Ubuntu 16.04, Unity) Closed
100%
Task Description

The main menu bar does not allow any selections, there is not even an underscored shortcut character shown.

 1602 QCAD (main)Bug ReportHigh QCAD crashes whenever I use the Help/Check for QCAD Pro ...Closed
100%
Task Description

2016 I Mac running Mac OS X Sierra Ver 10.12.5
Program crashes when I use the “Check for QCad Pro updates” in the “Help” menu
Therefor I cannot update to latest version

QCAD Data
Version:
3.16.5.0 (3.16.5)
Internet:
QCAD.org
Build Date:
Feb 6 2017
Revision:
62420f4
Qt Version:
5.8.0
Architecture:
x86_64
Compiler:
Clang 8.0.0

 1658 QCAD (main)Bug ReportHigh Crash when switching to layout block (32bit Linux, Qt4) Closed
100%
Task Description

Affects 32bit Linux when compiled against Qt4 (legacy platform release).

 1758 QCAD (main)Bug ReportHigh Draw > Polyline > Create from Selected Entities: crash  ...Closed
100%
Task Description

(Re-)combining polys touching at node with ‘create from selected’ leads to application crash.

QCAD 3.20.1 Win7 32bit

In the file example 2.
Regards

 4 BookBug ReportMedium Book "CAD Instruction" layout issues Closed
100%
1 Task Description

Post all kind of layout issues for the book “CAD Instruction” here, e.g. overlapping text.

 5 QCAD (main)Bug ReportMedium print preview: paper disappears on focus out / in Closed
100%
Task Description

when changing the window focus, the paper in the print preview disappears and doesn’t come back anymore

 8 QCAD (main)Bug ReportMedium Text Dialog: custom text height broken Closed
100%
Task Description

Custom text height cannot be set (enter closes the dialog, tab does not activate the entered text height)

 20 QCAD (main)Bug ReportMedium Changing drawing unit makes QCAD hangs Closed
100%
Task Description

Changing the unit of a drawing can make QCAD hangs

  • Mile: QCAD hangs in endless loop
  • Nanometer, Microinch: view turns white, at some levels of zoom, it turns gray
  • Foot, Yard: GraphicsView grid too small meshed
 31 QCAD (main)Bug ReportMedium Snap Coordinate / option toolbar: uncaught exception Closed
100%
Task Description
  • draw → line → snap coordinate
  • draw → line → snap polar coordinate
Uncaught exception at scripts/Snap/Coordinate/Coordinate.js:58: TypeError: Result of expression 'setButton' [undefined] is not an object.
58	    setButton.text = qsTr("Set");

problem: the option tool bar isn’t show at all

 40 QCAD (main)Bug ReportMedium saving spline CP, 2deg, closed hits assert Closed
100%
Task Description
  1. new file
  2. draw spline CP, 2deg, closed
  3. save → crash
Debug:    "RDwgServices::printErrorStackTrace: General modeling failure" 
Warning:  RDwgExporter::exportEntity: Exception occured. Entity NOT saved: 
 RSplineEntity(REntity(RObject(id: 23, document: "0xb246720", address: "0xb915f00", undone: 0), type: 23, layerId: 21, blockId: 22, lineweight: -1, linetypeId: 0, color: RColor(ByLayer) , drawOrder:  0 , selectionStatus:  false ) 
controlPoints (6): 0: RVector(14, 21, 0) 1: RVector(41, 25, 0) 2: RVector(41, 9, 0) 3: RVector(28, 4, 0) 4: RVector(14, 21, 0) 5: RVector(41, 25, 0) 
fitPoints (0): 
knots (7): 0: -1, 1: 0, 2: 1, 3: 2, 4: 3, 5: 4, 6: 5, )
Fatal:    ASSERT: "false" in file RDwgExporter.cpp, line 1234
Thread [1] 2066 (Suspended : Signal : SIGABRT:Aborted)	
	__kernel_vsyscall() at 0xffffe424	
	raise() at 0xb4f037ff	
	abort() at 0xb4f05140	
	RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8e025a6	
	qt_message_output() at 0xb5357f65	
	0xb53581ab	
	qFatal() at 0xb53582c9	
	qt_assert() at 0xb5358355	
	RDwgExporter::exportEntity() at RDwgExporter.cpp:1,234 0x8cb754f	
	RExporter::exportEntities() at RExporter.cpp:408 0x8de5c96	
	<...more frames...>	
 41 QCAD (main)Bug ReportMedium dimensions: tolerance shown twice after block insert Closed
100%
Task Description
  • File “ExampleDrawings/data/dim_aligned.dwg”:
    • upper limit: 0.01, lower limit 0.02 → correctly shown
  • choose “Generate Example Drawings” → the element “aligned dimension” (with limits set) shows 0.010.01 now, since both label and tolerance limits are set (according to the property editor):
    • label: <>\S0.01^0.02;
    • upper limit: 0.01
  • same for lower limit
  • “Generate Example Drawings” inserts the drawings as blocks
 43 QCAD (main)Bug ReportMedium Hatch ellipse Closed
100%
Task Description

cannot hatch single full ellipse

 45 QCAD (main)Bug ReportMedium Hatch Polyline Closed
100%
Task Description
  1. open the attached drawing
  2. select the polyline
  3. fill it with hatch pattern “stars” → looks ok, the whole area is filled
  4. save the file
  5. re-open it
  6. there is a gap in the filling now, see attached screen shot
 61 DocumentationBug ReportMedium QCAD 3 Manual Closed
100%
Task Description

Change the user manual directory / file names from ‘simpletextviewer’ to
‘qcad_user_manual’ and adjust the sources accordingly that the manual can be shown
in the help menu.

We can simply drop the contents of the manual that is checked in and replace
it with a simple note “No manual is available yet for this technology preview of QCAD 3”

 68 QCAD (main)Bug ReportMedium insert from library browser crashes Closed
100%
Task Description
  1. new file
  2. insert (drag-n-drop or insert button) from library browser → segfault
Thread [1] 12403 (Suspended : Signal : SIGSEGV:Segmentation fault)	
	RObject::getId() at RObject.h:92 0x8a11c82	
	RClipboardOperation::copy() at RClipboardOperation.cpp:66 0x8d4892a	
	RPasteOperation::apply() at RPasteOperation.cpp:30 0x8d4841a	
	RDocumentInterface::previewOperation() at RDocumentInterface.cpp:1,766 0x8de19bb	
	REcmaDocumentInterface::previewOperation() at REcmaDocumentInterface.cpp:4,711 0x889aaad	
	0xb6bd813c	
	0xb6ac1f68	
	0xb6a9164c	
	0xa83ced9f	
	0xb6a423e3	
	<...more frames...>	
 73 QCAD (main)Bug ReportMedium Uncaught exception: "cannot access member of deleted QO ...Closed
100%
Task Description

occurs sporadically, often when the application or a MDI child is closed, usually not reproducible.

  • 2011-05-11 15.19:32 unsaved drawing, after choosing “no” at the confirmation dialog
Uncaught exception at /home/martin/workspace/rsframework/scripts/Tools/PainterPathViewer/../../library.js:50:
Error: cannot access member `isNull' of deleted QObject
50	            (typeof(obj.isNull)=="function" && obj.isNull()===true));
 77 QCAD (main)Bug ReportMedium Linux: Printing crashes Closed
100%
Task Description

Printing segfaults under Linux after the printer dialog is shown.

 87 QCAD (main)Bug ReportMedium Advanced Selection hits 'debugger' statement Closed
100%
Task Description

Advanced selection dialog hits a debugger statement on line 1088.

  1. Selection- Advanced Selection
  2. Change first combo box to “Any”
 144 QCAD (main)Bug ReportMedium snap restriction buttons are not toggled Closed
100%
Task Description

the buttons works, but are not toggled (”restriction off” is always pushed)

 148 QCAD (main)Bug ReportMedium "inline" leads to linking error on Linux Closed
100%
Task Description

RPainterPath.h

    inline bool isEmpty() const;
g++ -rdynamic -Wl,-rpath,/home/martin/opt/QtSDK/Desktop/Qt/473/gcc/lib
-o ../../debug/qcad-bin debug/main.o
   -L/home/martin/opt/QtSDK/Desktop/Qt/473/gcc/lib
-L/usr/X11R6/lib -L/home/martin/workspace/rsframework/debug
-L/home/martin/workspace/rsframework/debug/opendesign
 -lecma -lecmaapi -ldwg -lpluginsqt -lgui -lentity -loperations -lspatialindexnavel
 -lgrid -lsnap -lcore -lstemmer -lmath -lrxslt -lrxml -ldxf -lModelerGeometry
 -lTD_BrepRenderer -lTD_Br -lTD_AcisBuilder -lTD_Db -lTD_DbRoot -lTD_Gs
 -lTD_SpatialIndex -lTD_Gi -lTD_Ge -lTD_Root -lFreeType -lTD_Alloc -lRecomputeDimBlock
 -lExFieldEvaluator -lQtWebKit -lQtScript -lQtScriptTools -lQtSvg -lQtSql -lQtXmlPatterns
 -lQtXml -lQtOpenGL -lQtGui -lQtNetwork -lQtCore -lGLU -lGL -lpthread 
/home/martin/workspace/rsframework/debug/libecmaapi.a(REcmaPainterPath.o): In function `REcmaPainterPath::isEmpty(QScriptContext*, QScriptEngine*)':
/home/martin/workspace/rsframework/src/scripting/ecmaapi/REcmaPainterPath.cpp:2078: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libgui.a(RGraphicsSceneQt.o): In function `RGraphicsSceneQt::endPath()':
/home/martin/workspace/rsframework/src/gui/RGraphicsSceneQt.cpp:71: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/src/gui/RGraphicsSceneQt.cpp:74: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libentity.a(RHatchData.o): In function `RHatchData::getBoundingBox() const':
/home/martin/workspace/rsframework/src/entity/RHatchData.cpp:104: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libentity.a(RHatchData.o): In function `RHatchData::getDistanceTo(RVector const&, bool, double, bool) const':
/home/martin/workspace/rsframework/src/entity/RHatchData.cpp:127: undefined reference to `RPainterPath::isEmpty() const'
/home/martin/workspace/rsframework/debug/libentity.a(RHatchData.o):/home/martin/workspace/rsframework/src/entity/RHatchData.cpp:134: more undefined references to `RPainterPath::isEmpty() const' follow
collect2: ld returned 1 exit status

temporary solution: changed method to non-line

 156 QCAD (main)Bug ReportMedium Isometric Projection fails for arc Closed
100%
Task Description
Uncaught exception at scripts/Modify/IsoProject/IsoProject.js:166:
TypeError: Result of expression 'shape.approximateWithLines' [undefined] is not a function.
166	        var pl = shape.approximateWithLines(this.segmentLength);
qsdb> shape
RArc(RShape(address: "0xc436c88"), center: RVector(11, 8, 0) , radius:  6.08276 , startAngle:  0 ,
endAngle:  6.28319 , startPoint:  RVector(17.0828, 8, 0) , endPoint:  RVector(17.0828, 8, 0) ,
reversed:  false )
 157 QCAD (main)Bug ReportMedium rotate causes uncaught exception Closed
100%
Task Description
  1. draw line
  2. Modify → Rotate
    • center point: line end point
    • delete original
    • angle 90°
Uncaught exception at scripts/Modify/Rotate/Rotate.js:117: Error: :-1:-1: Wrong number/types of arguments
for RDocumentInterface.applyOperation().
<native>(undefined) at -1
<anonymous>(event = RCoordinateEvent(0xbfffd478), preview = false) at scripts/Modify/Rotate/Rotate.js:117
<anonymous>(event = RCoordinateEvent(0xbfffd478)) at
/home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1197
<global>() at -1
117	                di.applyOperation(this.getOperation(false));
 158 QCAD (main)Bug ReportMedium polyline with segment radius mirrored wrong Closed
100%
Task Description
  • see attached drawing
 160 ECMAScriptBug ReportMedium SplitIntoEqualParts.js: Uncaught exception Closed
100%
Task Description
    for (var i = 0; i < this.parts; ++i) {
        var p1 = startPoint.operator_add(off.operator_multiply(i));
        var p2 = p1.operator_add(off);
        var line = new RLineEntity(doc, new RLineData(p1, p2));
=>      line.copyAttributesFrom(argLine);
        op.addObject(line, false);
Uncaught exception at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:174: Error: :-1:-1: REntity: Argument 0 is not of type REntity *REntity *.
<native>(RLineEntityPointer(0xb73b4c8)) at -1
<anonymous>(op = RAddObjectsOperation(0xb733790), argLine = RLineEntityPointer(0xb73b4c8)) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:174
<anonymous>(op = RAddObjectsOperation(0xb733790)) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:111
<anonymous>(true) at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:95
<anonymous>() at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1150
<anonymous>() at scripts/Modify/SplitIntoEqualParts/SplitIntoEqualParts.js:73
<global>() at -1
174	        line.copyAttributesFrom(argLine);

qsdb> argLine
RLineEntityPointer(0xb73b4c8)
 170 QCAD (main)Bug ReportMedium wrong scaling for ellipses / ellipse arcs Closed
100%
Task Description
  • see attachment
  • factor x/y: 0.5
  • green: original entities
  • red: properly scaled entities
 171 QCAD (main)Bug ReportMedium arc split wrong Closed
100%
Task Description
  • see attachment
 175 QCAD (main)Bug ReportMedium Trim.js: uncaught exception for ellipse / ellipse arcs Closed
100%
Task Description
  1. draw line as limiting entity
  2. draw ellipse and ellipse arc, both intersecting
  3. modify → trim
  4. select the diagonal line as limiting entity
  5. move around with the mouse over ellipse or ellipse arc → crash
Uncaught exception at scripts/Modify/Trim/Trim.js:267: TypeError: Result of expression
'trimmed1.trimStartPoint' [undefined] is not a function.
267	        trimmed1.trimStartPoint(is);
qsdb> .backtrace
#0  <anonymous>(op = RMixedOperation(0xc37b998), limitingEntity = RLineEntityPointer(0xc20c098),
limitingShape = RLine(RShape(address: "0xc217bd8"), startPoint: RVector(40, 36, 0) ,
endPoint:  RVector(-3, -3, 0) ) , limitingPos = RVector(2.81463, 1.47073, 0) ,
trimEntity = REllipseEntityPointer(0xc3775f8), trimPos = RVector(12.4488, 5.03537, 0) ,
trimBoth = false, preview = true) at scripts/Modify/Trim/Trim.js:267
#1  <anonymous>(preview = true) at scripts/Modify/Trim/Trim.js:167
#2  <anonymous>() at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1150
#3  <anonymous>(event = REntityPickEvent(0xbfffd3c8), preview = true) at scripts/Modify/Trim/Trim.js:147
#4  <anonymous>(event = REntityPickEvent(0xbfffd3c8)) at /home/martin/workspace/rsframework/scripts/Modify/../EAction.js:1225
#5  <global>() at -1
 178 QCAD (main)Bug ReportMedium add layer from property editor got uncaught exception Closed
100%
Task Description
  1. new drawing
  2. draw line
  3. select it
  4. choose “+” in property editor to add a new layer → the layer dialog pops up
  5. press cancel
  6. move the mouse back into the drawing area
Uncaught exception at /home/martin/workspace/rsframework/scripts/Widgets/PropertyEditor/PropertyEditor.js:197: TypeError: Result of expression 'layer' [undefined] is not an object.
197	        pw.propertyChanged(layer.getName());
 
qsdb> .backtrace
#0  <anonymous>(false) at /home/martin/workspace/rsframework/scripts/Widgets/PropertyEditor/PropertyEditor.js:197
#1  <native>() at -1
#2  main() at scripts/autostart.js:501
#3  <global>() at scripts/autostart.js:520
 179 QCAD (main)Bug ReportMedium pick view got uncaught exception Closed
100%
Task Description
  1. new drawing
  2. draw something
    • menus view → “remove view”, “edit view”, “pick view” are disabled, which is right
  3. add view → dialog pops up
  4. press cancel
    • menus view → “remove view”, “edit view”, “pick view” are enabled now, which is wrong
Uncaught exception at scripts/View/Pick/Pick.js:23: Error: :-1:-1: self is NULL
<native>(RVector(4.26248, 18.5602, 0) ) at -1
<anonymous>() at scripts/View/Pick/Pick.js:23
<global>() at -1
23	    view.setCenterPoint(gv.getBox().getCenter());
qsdb> view
NULL 
qsdb> .backtrace
#0  <anonymous>() at scripts/View/Pick/Pick.js:23
#1  <global>() at -1
 181 QCAD (main)Bug ReportMedium command line got uncaught exception Closed
100%
Task Description
  1. start QCAD (no arguments → a new blank drawing is shown)
  2. enter “new” into the command line
  3. close both drawings / tabs
  4. click into command line edit field and press “arrow up”
Uncaught exception at /home/martin/workspace/rsframework/scripts/Widgets/CommandLine/CommandLine.js:31: TypeError: Result of expression 'di' [null] is not an object.
31	        di.commandEventPreview(e);
 183 QCAD (main)Bug ReportMedium Linux CUPS: QPrinter::init() causes SIGPIPE:Broken pipe Closed
100%
Task Description
  • not reproduceable
  • Linux vostro 2.6.37.6-0.7-desktop #1 SMP PREEMPT 2011-07-21 02:17:24 +0200 i686 i686 i386 GNU/Linux
  • openSUSE 11.4 (i586)
  1. new drawing
  2. add new layer
  3. save as DWG
  4. File → Drawing Preferences → crash
/home/martin/workspace/rsframework/debug/qcad-bin [23943]	
	Thread [8] 23992 (Suspended : Container)	
		__kernel_vsyscall() at 0xffffe424	
		poll() at 0xb4f9703e	
		g_poll() at 0xb4b010bb	
		0xb4af0c46	
		g_main_context_iteration() at 0xb4af0fce	
		QEventDispatcherGlib::processEvents() at 0xb54a2741	
		QEventLoop::processEvents() at 0xb547131d	
		QEventLoop::exec() at 0xb54715aa	
		QThread::exec() at 0xb535e8ed	
		0xb544da4b	
		0xb5361b52	
		start_thread() at 0xb5177b05	
		clone() at 0xb4fa1d5e	
	Thread [7] 23954 (Suspended : Container)	
	Thread [6] 23953 (Suspended : Container)	
	Thread [5] 23952 (Suspended : Container)	
	Thread [3] 23950 (Suspended : Container)	
	Thread [2] 23946 (Suspended : Container)	
	Thread [1] 23943 (Suspended : Signal : SIGPIPE:Broken pipe)	
		__kernel_vsyscall() at 0xffffe424	
		send() at 0xb517f5b8	
		0xacd498b2	
		httpFlushWrite() at 0xacd49c21	
		0xacd4bcb8	
		cupsSendRequest() at 0xacd62470	
		cupsDoIORequest() at 0xacd62bc7	
		cupsDoRequest() at 0xacd62f0b	
		0xacd41d7f	
		cupsGetDests2() at 0xacd435d5	
		cupsGetDests() at 0xacd439a3	
		0xb5ad5153	
		0xb5a12133	
		0xb5a28344	
		0xb5a2b78c	
		QPrinter::init() at 0xb5a2d4ee	
		QPrinter::QPrinter() at 0xb5a2f01f	
		QtScriptShell_QPrinter::QtScriptShell_QPrinter() at 0xb02c9e29	
		qtscript_QPrinter_static_call() at 0xafe863ba	
		0xb6bd7f88	
		0xb6ac7c97	
		0xb6a91114	
		0xa7b3a4fd	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa7b8e0f6	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa7b91f81	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::ecmaInclude() at RScriptHandlerEcma.cpp:1,015 0x8799f2d	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xa7b91c9f	
		0xb6a44262	
		0xb6a466c9	
		0xb6a8db4a	
		0xa7b9465c	
		0xb6a423e3	
		0xb6af06e0	
		0xb6ac201e	
		QScriptValue::call() at 0xb6bd2e67	
		REcmaShellActionAdapter::beginEvent() at REcmaShellActionAdapter.cpp:149 0x8c5981a	
		RDocumentInterface::setCurrentAction() at RDocumentInterface.cpp:290 0x8ef0094	
		RScriptHandlerEcma::createActionDocumentLevel() at RScriptHandlerEcma.cpp:858 0x8798950	
		RGuiAction::slotTrigger() at RGuiAction.cpp:607 0x8f0e11f	
		RGuiAction::qt_metacall() at moc_RGuiAction.cpp:86 0x8f58cb1	
		QMetaObject::metacall() at 0xb5478c83	
		QMetaObject::activate() at 0xb5489134	
		QAction::triggered() at 0xb5869d99	
		QAction::activate() at 0xb586b48f	
		0xb5d550c0	
		0xb5d5b485	
		QMenu::mouseReleaseEvent() at 0xb5d5d65d	
		QtScriptShell_QMenu::mouseReleaseEvent() at 0xb0272feb	
		QWidget::event() at 0xb58da629	
		QMenu::event() at 0xb5d5aec4	
		QtScriptShell_QMenu::event() at 0xb027621b	
		QApplicationPrivate::notify_helper() at 0xb5871d7c	
		QApplication::notify() at 0xb58772c4	
		QCoreApplication::notifyInternal() at 0xb547215b	
		QApplicationPrivate::sendMouseEvent() at 0xb5875152	
		0xb59068fc	
		QApplication::x11ProcessEvent() at 0xb5905d26	
		0xb5932f04	
		g_main_context_dispatch() at 0xb4af0509	
		0xb4af0d10	
		g_main_context_iteration() at 0xb4af0fce	
		QEventDispatcherGlib::processEvents() at 0xb54a2741	
		0xb5932a55	
		QEventLoop::processEvents() at 0xb547131d	
		QEventLoop::exec() at 0xb54715aa	
		QCoreApplication::exec() at 0xb5473701	
		qtscript_QCoreApplication_static_call() at 0xb08dc4b7	
		0xb6bd813c	
		0xb6ac1f68	
		0xb6a9164c	
		0xb100d9e9	
		0xb6a44262	
		0xb6a445f7	
		0xb6bb0f92	
		QScriptEngine::evaluate() at 0xb6bba46f	
		RScriptHandlerEcma::eval() at RScriptHandlerEcma.cpp:743 0x8797fbc	
		RScriptHandlerEcma::doScript() at RScriptHandlerEcma.cpp:739 0x8797ea0	
		RScriptHandler::init() at RScriptHandler.cpp:31 0x8f3a8ca	
		main() at main.cpp:176 0x8792007	

Showing tasks 51 - 100 of 1768 Page 2 of 36 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing