Equally Spacing Items in a specified length

Use this forum to ask questions about how to do things in QCAD version 3

Moderator: andrew

Equally Spacing Items in a specified length

Postby sswcharlie » Wed Jul 09, 2014 5:41 am

HI

In a drawing for a wall (actually a model railroad carriage) I have specified length and I want to place at equal spacing a x number of windows. Not sure what you call this action.

Eg In a length of 60 feet I want to place 8 by 2' x 2' windows equally spaced between windows.

Just send me to the right tool and I can try it out.

Thanks

Charles Harris
sswcharlie
Newbie Member
 
Posts: 4
Joined: Tue Jul 08, 2014 1:48 am

Re: Equally Spacing Items in a specified length

Postby Husky » Wed Jul 09, 2014 8:28 am

sswcharlie wrote:Just send me to the right tool and I can try it out.

1. Design the first window (2'x2') and select this window
2. Modify Tool: "Move / Copy" and choose a reference point
3. Snap Tool: "Coordinat"
4. ... 8)
Work smart, not hard: QCad Pro
User avatar
Husky
Moderator
 
Posts: 657
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: Equally Spacing Items in a specified length

Postby Clive » Wed Jul 09, 2014 11:35 am

Hi Charles

To expand upon Husky's reply here's a quick run through of the method you could use to 'Array' your windows in a given direction.

1. Select given line, use Split Entities tool (from Modify toolset) and split the line in required number of parts (8), remember to tick the Green cross when happy.

Construction Method pic 1.png
Construction Method pic 1.png (28.61 KiB) Viewed 285 times


2.Place construction line (different layer using vertical line in this case) in the correct coordinate position (middle of spacing) and at desired length.

Construction Method pic 2.png
Construction Method pic 2.png (22.33 KiB) Viewed 285 times


3.Place two construction lines, needed for next stages.Draw window and place at correct position.

Construction Method pic 3.png
Construction Method pic 3.png (1.57 KiB) Viewed 285 times


4.Select window and use Copy/Move tool to create an Array. Follow the prompts given -select reference point, end of first construction line, select target point, end of second construction line. Now the Move/Copy dialog window will open.
Choose multiple copies and current layer and attributes, hit ok.


Construction Method pic 4.png
Construction Method pic 4.png (12.63 KiB) Viewed 285 times


5.Array complete, turn off layers as needed.

Construction Method pic 5.png
Construction Method pic 5.png (2.8 KiB) Viewed 285 times
Clive
User avatar
Clive
Moderator
 
Posts: 909
Joined: Thu Aug 25, 2011 9:28 pm
Location: UK


Return to QCAD 3 'How Do I' Questions

Who is online

Users browsing this forum: No registered users and 1 guest

cron