Print problem with the 2.1.6.4 version

If you are having problems with QCAD 2.1/2.2, post here. Please report bugs here.

Moderator: andrew

Locked
david666
Junior Member
Posts: 15
Joined: Tue Apr 03, 2007 9:05 pm
Location: FRANCE

Print problem with the 2.1.6.4 version

Post by david666 » Tue Apr 01, 2008 1:14 pm

I used a hp1220c printer with cups on slackware 12.0
I work with 2.1.3.2 version and print with it or the next version without problem.
When i try to print with the last version this plan or another
[img=http://img406.imageshack.us/img406/3792 ... ht9.th.jpg]

i had this
[img=http://img241.imageshack.us/img241/9338 ... ez5.th.jpg]

Any idea ?

Thanks
Slackware Inside

User avatar
andrew
Site Admin
Posts: 9019
Joined: Fri Mar 30, 2007 6:07 am

Post by andrew » Tue Apr 01, 2008 1:58 pm

This is most likely a problem with the Qt version used for that release in combination with your printer driver / printer.

If you could contact us by e-mail, I'd like to send you a link to a pre-release of QCad 2.2, compiled with Qt 4.3.4 to see if the problem persists.

Thanks

david666
Junior Member
Posts: 15
Joined: Tue Apr 03, 2007 9:05 pm
Location: FRANCE

Post by david666 » Tue Apr 01, 2008 2:33 pm

I send you my email by your website contact

Thanks for your quick reply
Slackware Inside

david666
Junior Member
Posts: 15
Joined: Tue Apr 03, 2007 9:05 pm
Location: FRANCE

Post by david666 » Tue Apr 01, 2008 2:59 pm

I try your 2.0.0 pre version , and all seems good for the printer

Many thanks
Slackware Inside

User avatar
andrew
Site Admin
Posts: 9019
Joined: Fri Mar 30, 2007 6:07 am

Post by andrew » Tue Apr 01, 2008 3:11 pm

Great - thanks for letting me know. QCad 2.2 will be released in a few days.

The Punisher
Newbie Member
Posts: 9
Joined: Thu Apr 12, 2007 10:23 pm

Post by The Punisher » Wed Apr 09, 2008 10:05 am

Same printer here, HP1220C with Kubuntu 8.04.
I worked with V.2.1.3.2 without problems.
To see my printers on dialog i use the command: ln -sf /var/run/cups/printcap /etc/printcap.
After that, portrait and landscape printing were printed well.

On 2.1.6.4 my HP1220C stop to print in landscape mode.
My other Samsung Laser still print in landscape mode very well.

On HP1220C all my drawing are cutted on the right side; If I print A4 paper in landscape mode first 9cm are blank and next 21cm correctly printed in landscape mode with the drawing cutted on its right.

This is a scan of HP1220C A4 printed with 2.1.6.4
http://www.bilder-upload.eu/show.php?fi ... oNljkV.jpg

This is a scan of Samsung SCX-4521F A4 printed with 2.1.6.4
http://www.bilder-upload.eu/show.php?fi ... KHtLKb.jpg

I need my Hp1220C to print in A3 landscape.
Now I draw on 2.1.6.4 and print in 2.1.3.2; It's no good!

The Punisher
Newbie Member
Posts: 9
Joined: Thu Apr 12, 2007 10:23 pm

Post by The Punisher » Fri Apr 11, 2008 3:29 pm

Just tested the latest version 2.2.0.0

Printing problem solved.

Thanks Andrew for your effort.

ttrw
Full Member
Posts: 87
Joined: Wed Apr 18, 2007 8:59 pm
Location: Birmingham, UK

Post by ttrw » Fri Apr 11, 2008 7:58 pm

andrew wrote:Great - thanks for letting me know. QCad 2.2 will be released in a few days.
Like usual, I can't find it anywhere! :?

Andrew, can you PM the link please?
Macbook Pro 2.14gHz 10.5.5 (UNIX!)

Locked

Return to “QCAD 2.1/2.2 Troubleshooting and Problems”