Hi,
I have found a strange problem with QCad 2.2.2.0 under MacOSX snow leopard (10.6)
I have found a file that have many blocks. All seems ok except that the arcs seems to have the X coordinate mirrored.
I upload an image. The file can be downloaded here:
http://www.elbag.net/it/_dxf/MR6HD.dxf
This is the result I have. Note that the block is selected and displayed in brown. The arcs should be on the left side, with the others lines.
A pdf I can download from this site tells me that it should be ok from other viewers, but I can't be sure - may be the dxf is broken.
Someone other have the same problem? is this a bug or is the dxf broken?
Thank you in advance.
best regards
ing. Federico Fuga
Arcs X coords mirrored in block [2.2.2.0]
Moderator: andrew
-
- Newbie Member
- Posts: 3
- Joined: Fri Oct 22, 2010 5:16 pm
-
- Newbie Member
- Posts: 3
- Joined: Fri Oct 22, 2010 5:16 pm
-
- Newbie Member
- Posts: 3
- Joined: Fri Oct 22, 2010 5:16 pm