Hi everybody,
The first thing The first thing I want to say is thank you for such excellent work.
I will like to buy QCad for my company, so I have some important questions:
- My company is an façades architectural engineering, Do you know about other similar company that use Qcad?
- We need some tools very important for us, and I don't know if Qcad has it, for example: It's possible to show the property of mass for a closed contour (region) like Inertia of principal axis, center of gravity....
- It's possible to configure the mouse for to do the right button like enter after command active....(similar to Autocad)
- Why do not can to input data in command line always (when there is a command active, I need to get the focus in command line)
- I can not to lengthen a line until other entity
-How can to do a boundary (polyline) choosing entities
......to be continued
Thank you
Some questions before buying
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Some questions before buying
QCad Pro
Re: Some questions before buying
There might be, but I wouldn't know.Idealos wrote:- My company is an façades architectural engineering, Do you know about other similar company that use Qcad?
No. You could create a feature request at:Idealos wrote:- We need some tools very important for us, and I don't know if Qcad has it, for example: It's possible to show the property of mass for a closed contour (region) like Inertia of principal axis, center of gravity....
http://www.qcad.org/bugtracker/index.ph ... &project=1
It is also possible to sponsor new tools and features.
No. QCAD uses the right mouse button to go back one step in the progress of the current tool.Idealos wrote:- It's possible to configure the mouse for to do the right button like enter after command active....(similar to Autocad)
The use of the command line is optional in QCAD.Idealos wrote:- Why do not can to input data in command line always (when there is a command active, I need to get the focus in command line)
You can however press the space bar to quickly get the focus of the command line. E.g. to draw lines: space, "line", enter.
Note that QCAD also provides two letter shortcuts which are usually faster than commands. When the command line does NOT have the focus, simply press the 'l' key, then the 'i' key to start drawing lines.
- Modify - TrimIdealos wrote:- I can not to lengthen a line until other entity
- Choose limiting entity
- Choose entity to lengthen
- Select - (De-)Select PolygonIdealos wrote:-How can to do a boundary (polyline) choosing entities
- hungerburg
- Premier Member
- Posts: 160
- Joined: Fri May 28, 2010 7:35 pm
Re: Some questions before buying
I wanted to recommend snapperpendicular to lengthen a line to where it would intersect with another one by means of the mouse. I use this a lot myself via auto-snap. In a quick test, I learned though, that snapperpendicular does not work this way. That is, it does when both lines are at a right angle, but not, when at any other angle: I cannot make sense of it at all. Andrew, would you care to explain?
(PS: sorry for hijacking this thread, it fits just so good. this with QCAD 3.4.1)
(PS: sorry for hijacking this thread, it fits just so good. this with QCAD 3.4.1)
Re: Some questions before buying
I need to do a new user, or I can use the forum profile (I tried to do it and tells me I have no permissions)andrew wrote:- No. You could create a feature request at:
http://www.qcad.org/bugtracker/index.ph ... &project=1
It is also possible to sponsor new tools and features.
Can I do it with selection area for more than one line)andrew wrote:-
- Modify - Trim
- Choose limiting entity
- Choose entity to lengthen
I am not able to do it. I want to convert one polygone that is not a closed polyline to it. Can you show me step by step.andrew wrote:- Select - (De-)Select Polygon
Thank you again
QCad Pro
Re: Some questions before buying
The short answer is that perpendicular snap generally only applies when drawing lines. See also:hungerburg wrote:I wanted to recommend snapperpendicular to lengthen a line to where it would intersect with another one by means of the mouse. I use this a lot myself via auto-snap. In a quick test, I learned though, that snapperpendicular does not work this way. That is, it does when both lines are at a right angle, but not, when at any other angle: I cannot make sense of it at all. Andrew, would you care to explain?
http://www.qcad.org/doc/qcad/latest/ref ... ar_en.html
It is also possible to use perpendicular snap in other situations. Just keep in mind that the snap point is the intersection point of the line from the relative zero point, perpendicular to the entity.
Re: Some questions before buying
No. Such an operation would not be defined (the click point where you choose the entity defines which end point of the entity is trimmed).Idealos wrote:Can I do it with selection area for more than one line)
My answer was for selecting all entities inside a polygonal area:Idealos wrote:I am not able to do it. I want to convert one polygone that is not a closed polyline to it. Can you show me step by step.
http://www.qcad.org/doc/qcad/latest/ref ... on_en.html
To convert separate lines and arcs into a polyline, please use Draw - Polyline - Create from Segments:
http://www.qcad.org/doc/qcad/latest/ref ... ts_en.html
Re: Some questions before buying
Hi again,
- Can I do dimension styles?
- It's possible to apply hatch to different cells into a big polygone, doing click in every different boundary?
Thank you
- Can I do dimension styles?
- It's possible to apply hatch to different cells into a big polygone, doing click in every different boundary?
Thank you
QCad Pro
Re: Some questions before buying
No.Idealos wrote:- Can I do dimension styles?
No.Idealos wrote:- It's possible to apply hatch to different cells into a big polygone, doing click in every different boundary?