QCAD Bugtracker

  • Status Closed
  • Percent Complete
    100%
  • Task Type Bug Report
  • Category QCAD (main)
  • Assigned To
    Andrew
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version 3.1.0 Beta 1
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: QCAD Bugtracker
Opened by Peter - 03.06.2013
Last edited by Andrew - 14.06.2013

FS#818 - SVG Exporter crashes on polyline

Attached sample drawing, that kills QCAD 3.1 beta when exporting to SVG.

The crash happens in line 38 of SvgExporterPG in function SvgExporterPG.prototype.exportPolyline

var pp = new RPainterPath(polyline.toPainterPath());
   Skizze-Crash.dwg (16.9 KiB)
Closed by  Andrew
14.06.2013 20:24
Reason for closing:  Fixed
Admin
Andrew commented on 03.06.2013 18:36

Thanks. What platform are you on? Are there any special settings you are using other than "Preserve geometry"?
I'm trying to reproduce the problem here without success so far.

Peter commented on 04.06.2013 10:02

Thank You Andrew, I now did unpack the distribution in a new directory and renamed the configuration file.

Indeed, here it is enough to request PG from extended SVG export to trigger the segfault.

I fire up ./qcad, draw a polyline with two segments, call the SVG export, tick PG, Save, crash.

I now installed a 32bit valgrind, perhaps its output gives a clue? System is Ubuntu 12.04. 

:) $ pwd
/opt/qcad-3.1.0-beta-pro-linux-x86

:) $ file qcad-bin
qcad-bin: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.4, BuildID[sha1]=0x45e1653e76ee3681de2db242509d6c1009c75f23, stripped

:( $ uname -a
Linux lazy 3.2.0-44-generic #69-Ubuntu SMP Thu May 16 17:35:01 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

:) $ LD_LIBRARY_PATH=. ldd ./qcad-bin
	linux-gate.so.1 =>  (0xf76f4000)
	libqcadecmaapi.so => ./libqcadecmaapi.so (0xf68ef000)
	libqcadgui.so => ./libqcadgui.so (0xf689a000)
	libqcadentity.so => ./libqcadentity.so (0xf67c3000)
	libqcadoperations.so => ./libqcadoperations.so (0xf67ac000)
	libqcadspatialindex.so => ./libqcadspatialindex.so (0xf67a1000)
	libspatialindexnavel.so => ./libspatialindexnavel.so (0xf66db000)
	libqcadgrid.so => ./libqcadgrid.so (0xf66ce000)
	libqcadsnap.so => ./libqcadsnap.so (0xf66bd000)
	libqcadcore.so => ./libqcadcore.so (0xf620c000)
	libqcadstemmer.so => ./libqcadstemmer.so (0xf61e9000)
	libGLU.so.1 => /usr/lib/i386-linux-gnu/libGLU.so.1 (0xf6154000)
	libQtWebKit.so.4 => ./libQtWebKit.so.4 (0xf4a7f000)
	libQtScriptTools.so.4 => ./libQtScriptTools.so.4 (0xf49c7000)
	libQtScript.so.4 => ./libQtScript.so.4 (0xf4724000)
	libQtSvg.so.4 => ./libQtSvg.so.4 (0xf46ce000)
	libQtXmlPatterns.so.4 => ./libQtXmlPatterns.so.4 (0xf42ba000)
	libQtOpenGL.so.4 => ./libQtOpenGL.so.4 (0xf41b7000)
	libQtXml.so.4 => ./libQtXml.so.4 (0xf4172000)
	libGL.so.1 => /usr/lib32/fglrx/libGL.so.1 (0xf4085000)
	libQtDesigner.so.4 => ./libQtDesigner.so.4 (0xf3b4a000)
	libQtHelp.so.4 => ./libQtHelp.so.4 (0xf3ac4000)
	libQtSql.so.4 => ./libQtSql.so.4 (0xf3a83000)
	libQtGui.so.4 => ./libQtGui.so.4 (0xf2f89000)
	libQtNetwork.so.4 => ./libQtNetwork.so.4 (0xf2e42000)
	libQtCore.so.4 => ./libQtCore.so.4 (0xf2b42000)
	libpthread.so.0 => /lib/i386-linux-gnu/libpthread.so.0 (0xf2b27000)
	libstdc++.so.6 => ./libstdc++.so.6 (0xf2a38000)
	libm.so.6 => /lib/i386-linux-gnu/libm.so.6 (0xf2a0b000)
	libgcc_s.so.1 => ./libgcc_s.so.1 (0xf29ed000)
	libc.so.6 => /lib/i386-linux-gnu/libc.so.6 (0xf2844000)
	libfontconfig.so.1 => /usr/lib/i386-linux-gnu/libfontconfig.so.1 (0xf280f000)
	libfreetype.so.6 => /usr/lib/i386-linux-gnu/libfreetype.so.6 (0xf2775000)
	libXext.so.6 => /usr/lib/i386-linux-gnu/libXext.so.6 (0xf2763000)
	libX11.so.6 => /usr/lib/i386-linux-gnu/libX11.so.6 (0xf262f000)
	libXrender.so.1 => /usr/lib/i386-linux-gnu/libXrender.so.1 (0xf2625000)
	libdl.so.2 => /lib/i386-linux-gnu/libdl.so.2 (0xf261f000)
	libQtCLucene.so.4 => ./libQtCLucene.so.4 (0xf2516000)
	libgthread-2.0.so.0 => /usr/lib/i386-linux-gnu/libgthread-2.0.so.0 (0xf2513000)
	librt.so.1 => /lib/i386-linux-gnu/librt.so.1 (0xf250a000)
	libglib-2.0.so.0 => /lib/i386-linux-gnu/libglib-2.0.so.0 (0xf2410000)
	libgobject-2.0.so.0 => /usr/lib/i386-linux-gnu/libgobject-2.0.so.0 (0xf23c1000)
	libSM.so.6 => /usr/lib/i386-linux-gnu/libSM.so.6 (0xf23b8000)
	libICE.so.6 => /usr/lib/i386-linux-gnu/libICE.so.6 (0xf239e000)
	/lib/ld-linux.so.2 (0xf76f5000)
	libexpat.so.1 => /lib/i386-linux-gnu/libexpat.so.1 (0xf2374000)
	libz.so.1 => /lib/i386-linux-gnu/libz.so.1 (0xf235d000)
	libxcb.so.1 => /usr/lib/i386-linux-gnu/libxcb.so.1 (0xf233c000)
	libpcre.so.3 => /lib/i386-linux-gnu/libpcre.so.3 (0xf2300000)
	libffi.so.6 => /usr/lib/i386-linux-gnu/libffi.so.6 (0xf22f9000)
	libuuid.so.1 => /lib/i386-linux-gnu/libuuid.so.1 (0xf22f3000)
	libXau.so.6 => /usr/lib/i386-linux-gnu/libXau.so.6 (0xf22ee000)
	libXdmcp.so.6 => /usr/lib/i386-linux-gnu/libXdmcp.so.6 (0xf22e7000)

:) $ export LD_LIBRARY_PATH=/opt/qcad-3.1.0-beta-pro-linux-x86
:) $ valgrind /opt/qcad-3.1.0-beta-pro-linux-x86/qcad-bin

[...]
==4324== Process terminating with default action of signal 11 (SIGSEGV)
==4324==  Bad permissions for mapped region at address 0x8CF8F88
==4324==    at 0xF70CDC1: QPainterPath::QPainterPath(QPainterPath const&) (in /opt/qcad-3.1.0-beta-pro-linux-x86/libQtGui.so.4)
==4324==    by 0x89E72E4: RPainterPath::RPainterPath(QPainterPath const&) (in /opt/qcad-3.1.0-beta-pro-linux-x86/libqcadcore.so)
==4324==    by 0x7171FFE: REcmaPainterPath::create(QScriptContext*, QScriptEngine*) (in /opt/qcad-3.1.0-beta-pro-linux-x86/libqcadecmaapi.so)
==4324==    by 0xBBE8A8A: QScript::FunctionWrapper::proxyConstruct(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::ArgList const&) (in /opt/qcad-3.1.0-beta-pro-linux-x86/libQtScript.so.4)
==4324==    by 0xBAEBD32: QTJSC::NativeConstrWrapper::operator()(QTJSC::ExecState*, QTJSC::JSObject*, QTJSC::ArgList const&) const (in /opt/qcad-3.1.0-beta-pro-linux-x86/libQtScript.so.4)
==4324==    by 0xBABA4DF: cti_op_construct_NotJSConstruct (in /opt/qcad-3.1.0-beta-pro-linux-x86/libQtScript.so.4)
==4324==    by 0x4065A094: ???
==4324==    by 0xBA67684: QTJSC::Interpreter::execute(QTJSC::FunctionExecutable*, QTJSC::ExecState*, QTJSC::JSFunction*, QTJSC::JSObject*, QTJSC::ArgList const&, QTJSC::ScopeChainNode*, QTJSC::JSValue*) (in /opt/qcad-3.1.0-beta-pro-linux-x86/libQtScript.so.4)
==4324==    by 0xBB10CAB: QTJSC::JSFunction::call(QTJSC::ExecState*, QTJSC::JSValue, QTJSC::ArgList const&) (in /opt/qcad-3.1.0-beta-pro-linux-x86/libQtScript.so.4)
==4324==    by 0xBAE5CAD: QTJSC::call(QTJSC::ExecState*, QTJSC::JSValue, QTJSC::CallType, QTJSC::CallData const&, QTJSC::JSValue, QTJSC::ArgList const&) (in /opt/qcad-3.1.0-beta-pro-linux-x86/libQtScript.so.4)
==4324==    by 0xBBE2731: QScriptValue::call(QScriptValue const&, QList<QScriptValue> const&) (in /opt/qcad-3.1.0-beta-pro-linux-x86/libQtScript.so.4)
==4324==    by 0x7507ACD: REcmaShellFileExporterAdapter::exportPolyline(RPolyline const&, double) (in /opt/qcad-3.1.0-beta-pro-linux-x86/libqcadecmaapi.so)
==4324== 
==4324== HEAP SUMMARY:
==4324==     in use at exit: 88,361,050 bytes in 204,412 blocks
==4324==   total heap usage: 4,102,374 allocs, 3,897,962 frees, 325,343,381 bytes allocated
==4324== 
==4324== LEAK SUMMARY:
==4324==    definitely lost: 4,432 bytes in 29 blocks
==4324==    indirectly lost: 18,100 bytes in 902 blocks
==4324==      possibly lost: 490,114 bytes in 8,349 blocks
==4324==    still reachable: 87,848,404 bytes in 195,132 blocks
==4324==         suppressed: 0 bytes in 0 blocks
==4324== Rerun with --leak-check=full to see details of leaked memory
==4324== 
==4324== For counts of detected and suppressed errors, rerun with: -v
==4324== Use --track-origins=yes to see where uninitialised values come from
==4324== ERROR SUMMARY: 19203 errors from 102 contexts (suppressed: 1 from 1)
Getötet
Admin
Andrew commented on 07.06.2013 11:42

Not reproducible here with a virgin Ubuntu 12.04 64bit, packages ia32-lib and ia32-lib-multiarch installed.

Peter commented on 10.06.2013 13:11

Hmm, puzzling that. I only had the required dependencies installed, but installing all of ia32-lib-multiarch does not help. I now tried on another system, that is conservatively managed and eg. does not pull "precise-proposed" sources, which might spoil the fun. Still "./dwg2svg -f -g /tmp/poly.dxf" ends with a segfault in 3.1beta, while works in 3.0.0.

In search of what change in the envirnment might cause the failure, only idea now, is that my systems both are 12.04.2, i.e. fully updated, and use the "precise-updates" repo, which is a recommended practice for ubuntu users, and which brought an update to all the qt4* and many *:i386 packages...

Peter commented on 12.06.2013 08:33

The more puzzling: Yesterday I installed (unpacked the zip) qcad3.1 pro beta on a windows 7 system. There is also qcad3.0.0 on that system, but as far as I can tell, qcad3.1 will not use any of the settings from 3.0.

So I started the application, drew some three or four segments polyline and exported to svg from the button, then again from the menu and ticked "preserve gemoetry" and instantly was greeted with a box saying "the application does not work anymore, windows is looking into it".

I suppose its the same fault as on ubuntu. Today I may try on another, even cleaner windows 7 box.

Admin
Andrew commented on 14.06.2013 20:24

I was finally able to reproduce this under a Windows XP installation. The problem is likely fixed in QCAD 3.1. Please let me know if not.

Peter commented on 15.06.2013 15:13

Thank You Andrew, I loaded the 3.1 release and found SVG-PG exporting of polylines working.

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing