QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  ascTask TypeSeveritySummaryStatusProgress
1801QCAD (main)Performance IssueLowlow perfomance in paper space and viewportsAssigned
0%
Task Description

Improving the performance of the exceptional use of the processors when switching from the model to the paper space (testing with the attached file) the functionalities of the commands for the viewports are too low in the paper space.

2021QCAD (main)Performance IssueVery LowCannot work with big dwg filesAssigned
0%
Task Description

Openning a big file or doing any action in it, takes minutes to load.
Even dragging the scrollbar slightly left or right, takes mintues to redraw the canvas again, which makes QCAD un-usable for professional use.
Is there a way to make QCAD usable, after loading completed:
- Like suppressing edit until user says so,
- or taking snapshots of rendered canvases to another file and use it, as windows uses thumb.db ( for negative latency :P )

PS: I wish I could help a bit, but my hand are tied. I am just a java freak, I am opt to any idea of porting it to java, if she is still alive.

Tuğalsan Karabacak
EEE, MSc Mobile Comp & App, IWE

2063QCAD (main)Performance IssueLowBad performance while zooming inside layout block with ...Assigned
0%
2 Task Description

Zooming in and out is lagging to the point of unusable. This is happening in a layout block with the cursor pointing inside geometry with hatches. When the cursor is pointing outside the geometry zooming works as expected.
The attached file has a very simplified testcase that shows this problem almost in the same way as a more complex drawing with multiple layers and hatches.

edit: I also attached the more complex drawing because it is a bit unclear to me where the lagging stops. Outside the viewport or outside the paper.

I just noticed the selection box has the same problem!

1323QCAD (main)SuggestionLowImprove command line support in QCADAssigned
0%
Task Description

Hi,

As a typical command line draftsman (still using acad10 for dos, since microsoft doesn’t supoort Win NT anymore),
I noticed a severe lack on command line acces in QCAD.

For example I find the icon and pixel selecting methods within qcad very confusing and rude.

With the normal cad Select command I can select exactly what en how I want it.

I intend not to be rude, but I find my drawing screen littered all over with all kind of very specialist menu’s,
tools and options. Sorry, I just want to make a drawing at the natural intuitive way, as with a pencil.
So I use command line Commands, such as Move, Copy, Change, Select, a.s.o.
For a ‘Command scripting’ user (-batching is a different tool!-),
it seems to me logical these basic commands should be accessable.

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
0%
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

1678QCAD (main)SuggestionLowProperty Editor dialogAssigned
0%
Task Description

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239

1740QCAD (main)SuggestionLowMake unprintable layers also hidden in print previewAssigned
0%
Task Description

Make unprintable layers also hidden in print preview

1754QCAD (main)SuggestionLowWhen Selecting multiple blocks that contain the same at...Assigned
0%
Task Description

When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.

1789QCAD (main)SuggestionLowApplication Preferences / General / Performance :0Assigned
0%
1 Task Description

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

1851QCAD (main)SuggestionLowLateral surface of a coneAssigned
0%
Task Description

Module mise à plat d’un cone

Bonjour,

Serait il possible dans un futur d’ajouter un module de mise en plan de cone.

Une petite fenêtre sur lequel on donne par exemple :
1- Ø haut
2- angle de coupe du haut
3- hauteur du cône
4- Ø bas
5- angle du bas
6- épaisseur matière

Ce qui permettrai de sortir une mise en plan a plat de la forme

1915QCAD (main)SuggestionLowViewport does not rotate view-port when changed in pape...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport.

Actual

The object in the viewport changes but the viewport itself remains unchanged

Expected

That both the view-port and the object changes angle as the angle is updated

Motivation

If you abort the placement (but keep the angle) and go back to model-space and then redo the operation the view-port is rotated along the angle. It seems that the viewport only picks up the initial angle once the paper-space is open and ignores any changes thereafter

Workaround

1. Select the view-port per normal in model-space
2. Open the paper-space and set the wanted angle but do not place the view-port in paper space
3. Abort the placement on paper-space and redo the whole operation

Once the paper space is opened again the view-port will have the chosen angle

2072QCAD (main)SuggestionLowInserted and flipped block mirrors text and dimAssigned
0%
Task Description

Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.

Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.

Version 3.23.0 doesn’t shows this behavior.

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206

2115QCAD (main)SuggestionLowMove toolbars with negative positions to 0 positions Assigned
100%
Task Description

As it can be seen in the attached image, QCAD toolbars may dock to a position slightly outside the visible area of the screen. After having docked there, I have not been able to move them any more. Their current position is just in the middle of the screen.

The position of the toolbars remains the same after the deinstallation of QCAD, shutting down, restarting the computer and reinstalling QCAD. I kindly ask for help.

Kind regards
Reinhard

2138QCAD (main)SuggestionVery LowBlock zoomstate supersedes Model_Space after Undo of BCAssigned
0%
1 Task Description

Summary: Block zoomstate supersedes Model_Space after Undo of BC

QCAD Professional
Version: 3.25.2.1 (3.25.2.1)
Internet: QCAD.org
Build Date: Oct 15 2020
Revision: 2895712
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown «< (Win installer 32 bit)

With the file provided:
ZW to see the top green ‘revision cloud’ up close
QQ
Box select around the cloud
»> 2 entities in selection
BC, select origin somewhere inside the selection, accept proposed naming
»> ‘Block 1’ is created from the selection
TN
BD, select the newly created Block Reference
»> Auto zoom of ‘Block 1’ (Intended behavior)
OO
»> Returns to Model_Space with the zoomstate of the removed Block
»> Halfway down the drawing
»> The former zoomstate of the Model_Space is lost

Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix
See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378

This proves they do, even if the block doesn’t exists anymore.

Regards,
CVH

PS: 3th trial to enter a suggestion ...

2140QCAD (main)SuggestionLowChanging navigation mode for mouse wheel doesn't change...Assigned
0%
1 Task Description

Looks like error, but may be that’s feature request.

CAD software uses typical navigation behavior as:
Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.

Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior:
Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.

Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.

QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel.
Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!

Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.

2146QCAD (main)SuggestionVery LowKeep 'Invisible' objects invisible while savingAssigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882
Explanation found in REntity.cpp
Listed as a Public Member Functions inherited from RObject

Regards,
CVH

2147QCAD (main)SuggestionVery LowAllow breaking up self-intersecting a 2e time (at endpo...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can cut (DI) once.
Cutting the second segment results in NO cut.

Regards
CVH

2148QCAD (main)SuggestionVery LowAllow undo after breaking up self-intersecting with D2 ...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can break out segment (D2):
- removing one of the loops with the ‘remove’ option.
- leaving both without the ‘remove’ option.
Bug?
Without the ‘remove’ option it can’t be undone.

Regards
CVH

2149QCAD (main)SuggestionVery LowAllow undo after auto trim self-intersecting with AX in...Assigned
0%
1 Task Description

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown



Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can auto trim (AX):
- The lower loop.
- The top loop.
Bug?
The action on the top loop can’t be undone.

Regards
CVH

2162QCAD (main)SuggestionLowUpdate the parameter with simplify of RPolylineData & R...Assigned
0%
1 Task Description

Unrelated to OS, nor version

Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372

Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated.
The Classes still refer to an ‘angleTolerance’.

Regards,
CVH

2181QCAD (main)SuggestionVery LowApply more distinguishable Enabled and Disabled state i...Assigned
0%
1 Task Description

QCAD Professional
Win7 WinInstaller 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related forum Topic:
https://qcad.org/rsforum/viewtopic.php?t=8015

CVH

2216QCAD (main)SuggestionLowDIM modification cause overlapping textAssigned
0%
1 Task Description

When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.

2242QCAD (main)SuggestionLowBill of MaterialsAssigned
0%
4 Task Description

It would be a very interesting feature to add to future versions.

I also use AutoCAD Mechanical 2012 and the BOM is synced with every balloon on the drawing. Making it easy to edit.

The core BOM accepts formula fields and we can easily calculate the mass of a part, with some Ifs and math.

The BOM that is shown in the actual drawing is more simplistic, and has just Part number, Quantity, Mass and the Description. But it’s related to the “core BOM”.

It’s a very interesting thing! It would be great on QCad.

2261QCAD (main)SuggestionVery LowQCAD change freehand tool to freehand spline toolAssigned
0%
Task Description

no task description

2297QCAD (main)SuggestionVery LowFew UI inconsistencies Assigned
0%
Task Description

1) Line with command prompt in Command Line widget is missing padding/margin - letter C is glued to frame.
2) In the “Selection Filter” widget there is an “whitespace” character before colon “:” symbol on multiple places, it doesn’t seem repeat anywhere else

2130QCAD (main)TaskLowText: Text dialog removes tabsAssigned
0%
Task Description

Text dialog (QTextEdit) strips tabs in toHtml.
If tabs can be retained, text entities could support tabs.

2068QCAD Community EditionBug ReportVery LowNon-english text in upper/lower index becomes UTF codeAssigned
0%
Task Description

How to reproduce.

1. Create a text field with some non-english words in the upper index. (see attached pic1.png)
2. Save the project and close QCAD.
3. Run QCAD and open same project.
4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)

Tried different fonts - doesn’t help.

Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
CentOS Linux release 7.7.1908 (Core)

2312QCAD Community EditionBug ReportLowDraw from CSV can not create Layers with NewLayerAssigned
0%
Task Description

NewLayer always complains about a missing parent layer.

I could not figure out how to create Layers from a CSV file,
I tried DrawCSV_Layer_test.csv which is a reference test from the qcad repo but NewLayer always returns “Parent layer doesn’t exist.”

Reading from file: /home/zem/DrawCSV_Layer_test.csv
Switched to semicolon/comma CSV style.
Layer doesn't exist, ignored. Text line 20 layer: 0 Entity Colors
Not a correct layer name. Text line 24 name: Invalid=`name`
Add/Update layer ignored.
Not a correct color. Text line 25 color: ByBlock
Add/Update layer ignored.
Not a correct Lineweight. Text line 26 weight: 999
Add/Update layer ignored.
Not a correct Linetype. Text line 27 type: Orange line
Add/Update layer ignored.
Parent layer doesn't exist. Text line 31 layer: MyLayerInvalid paren
Add/Update layer ignored.
Can not hide layer, ignored. Text line 34 layer: Invalid Hide
Can not freeze layer, ignored. Text line 35 layer: Invalid FreezeInvalid SUB
Can not lock layer, ignored. Text line 36 layer: Invalid Lock
Can not lock layer, ignored. Text line 37 layer: Invalid=`name`
Can not allow layer, ignored. Text line 38 layer: Invalid Allow
Can not switch to layer, ignored. Text line 39 layer: Invalid layer switch
Can not switch to layer, ignored. Text line 40 layer: Invalid=`name`
Parent layer doesn't exist. Text line 43 layer: 01 Gree
Add/Update layer ignored.
Parent layer doesn't exist. Text line 44 layer: 02 Parent
Add/Update layer ignored.
Parent layer doesn't exist. Text line 45 layer: 02 Parent1Sub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 46 layer: 02 Parent1Sub1SubSub1 
Add/Update layer ignored.
Parent layer doesn't exist. Text line 47 layer: 03 Parent
Add/Update layer ignored.
Parent layer doesn't exist. Text line 48 layer: 03 Parent2Sub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 49 layer: 03 Parent2Sub2SubSub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 50 layer: 04 Parent
Add/Update layer ignored.
Parent layer doesn't exist. Text line 51 layer: 04 Parent3Sub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 52 layer: 04 Parent3Sub3SubSub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 53 layer: Last New &Curren
Add/Update layer ignored.
Can not hide layer, ignored. Text line 56 layer: 03 Parent2
Can not freeze layer, ignored. Text line 57 layer: 03 Parent2Sub2
Can not lock layer, ignored. Text line 58 layer: 03 Parent2Sub2SubSub2
Can not hide layer, ignored. Text line 60 layer: 04 Parent3
Can not freeze layer, ignored. Text line 61 layer: 04 Parent3
Can not lock layer, ignored. Text line 62 layer: 04 Parent3
Can not hide layer, ignored. Text line 63 layer: 04 Parent3Sub3
Can not freeze layer, ignored. Text line 64 layer: 04 Parent3Sub3
Can not lock layer, ignored. Text line 65 layer: 04 Parent3Sub3
Can not hide layer, ignored. Text line 66 layer: 04 Parent3Sub3SubSub3
Can not freeze layer, ignored. Text line 67 layer: 04 Parent3Sub3SubSub3
Can not lock layer, ignored. Text line 68 layer: 04 Parent3Sub3SubSub3
Can not allow layer, ignored. Text line 70 layer: 04 Parent3
Can not switch to layer, ignored. Text line 76 layer: 02 Parent1Sub1SubSub1 %
Layer doesn't exist, ignored. Text line 82 layer: 02 Parent1
Can not switch to layer, ignored. Text line 85 layer: 02 Parent1Sub1SubSub1 %
Casted entries : 4 with 90 text lines
Importing CSV complete. Command ended.

No layers are added in the resulting drawing.

OS here is fedora 34 and qcad is either from fedora or rpmfusion.

2315QCAD Community EditionBug ReportLowCrash after ~10-th times move Spline nodesAssigned
0%
Task Description

1. Create spline
2. Move spline nodes. After ~10 times move qcad is crashed with backtrace:
Thread 9 “Thread (pooled)” received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fff56dc9640 (LWP 8224)]
0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848) at /usr/include/qt5/QtCore/qlist.h:492
492 current→v = new T(*reinterpret_cast<T*>(src→v));
(gdb) bt
#0 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848)

  at /usr/include/qt5/QtCore/qlist.h:492

#1 QList<QSharedPointer<RShape> >::detach_helper (alloc=<optimized out>, this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:835
#2 QList<QSharedPointer<RShape> >::detach_helper (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:849
#3 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178
#4 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178
#5 0x00007ffff686182a in QList<QSharedPointer<RShape> >::end (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/qlist.h:342
#6 QList<QSharedPointer<RShape> >::last (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:364
#7 RSpline::appendToExploded (this=0×555557311510, line=...) at math/RSpline.cpp:964
#8 0x00007ffff6867059 in RSpline::getExploded (this=0×555557311510, segments=1457293328) at math/RSpline.cpp:919
#9 0x00007ffff686682a in RSpline::getLength ([email protected]=0×555557311510) at math/RSpline.cpp:1026
#10 0x00007ffff6c11490 in RSplineData::getLength (this=<optimized out>, this=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineData.h:178
#11 RSplineEntity::getProperty (this=0x5555573114a0, propertyTypeId=..., humanReadable=<optimized out>, noAttributes=<optimized out>,

  showOnRequest=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineEntity.cpp:253

#12 0x00007ffff67cc214 in RPropertyEditor::computePropertyValue (ccProp=...) at /usr/src/debug/qcad-3.27.0.0/src/core/RPropertyEditor.cpp:574
#13 0x00007ffff67d298f in QtConcurrent::FunctionWrapper1<void, RProperty&>::operator() (u=..., this=0x555557757f18)

  at /usr/include/qt5/QtConcurrent/qtconcurrentfunctionwrappers.h:80

#14 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIteration (it=..., this=0x555557757ee0)

  at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:68

#15 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIterations (this=0x555557757ee0,

  sequenceBeginIterator=..., beginIndex=<optimized out>, endIndex=15) at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:77

#16 0x00007ffff67d2c9d in QtConcurrent::IterateKernel<QList<RProperty>::iterator, void>::forThreadFunction (this=0x555557757ee0)

  at /usr/include/qt5/QtConcurrent/qtconcurrentiteratekernel.h:255

#17 0x00007ffff44b5b2d in QtConcurrent::ThreadEngineBase::run (this=0x555557757f20) at qtconcurrentthreadengine.cpp:302
#18 0x00007ffff59c8d52 in QThreadPoolThread::run (this=0x555556198b10) at thread/qthreadpool.cpp:100
#19 0x00007ffff59c5a61 in QThreadPrivate::start (arg=0x555556198b10) at thread/qthread_unix.cpp:329
#20 0x00007ffff546c717 in start_thread (arg=<optimized out>) at pthread_create.c:435
#21 0x00007ffff54f018c in clone3 () from /lib64/libc.so.6
(

2011QCAD Community EditionSuggestionVery LowUpdate QCAD CE SpatialIndex module to latest versionAssigned
0%
Task Description

Building with the bundled version, 1.8.5, works fine.

When I try to build using the system version, which for Mageia Cauldron is 1.9.3, the build fails.

https://raw.githubusercontent.com/kekePower/mmbl/master/qcad/2019/12/11/20%3A13%3A48/log.qcad

Here is the current spec file for version 3.23.0.4.
https://svnweb.mageia.org/packages/cauldron/qcad/current/SPECS/qcad.spec?revision=1465894&view=markup

It looks like qcad is incompatible with versions above 1.8.5.

Are there plans to port to the new version?

Thanks in advance.

1843QCAD/CAMBug ReportLowCreating ToolPath StallsAssigned
0%
Task Description

Hi Andrew,

Still working with and on CAM HPGL for the HP7580 pen plotter.

I have added a penplotter test drawing, that might be used for testing en callibrating plotter and pens. You may add it to the Examples-directory.

QCAD has a lot of trouble creating toolpaths and exports. Much too often it shuts itself down, or gets stalled. Why? I am not sure.

1847QCAD/CAMBug ReportLowBUG MEMORYAssigned
0%
Task Description

Hi Andrew,

Still working on creating HPGL.PLT toolpaths for the HP7580 pen plotter. QCAD has some trouble creating toolpaths. Too often it shuts itself down, or the PC gets stalled.

Recreating the same error however is possible

1913QCAD/CAMBug ReportLow3D Simulation Behaves oddAssigned
0%
Task Description

Hallo Andrew,

testing the drill toolpath I used single point markers.

In 3D simulation the tool drills the toolpath AND uses the drill as a mill.

Cam Export and generated G-code is not effected.

1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

2167QCAD/CAMBug ReportLowComma format decimal separator fails ZSafety CAM config...Assigned
0%
1 Task Description

QCAD/CAM
Trial package Win installer 32 bit
Version: 3.25.2.0 (3.25.2)
Internet: QCAD.org
Build Date: Sep 4 2020
Revision: 4a61501
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Local decimal separator is ‘,’ (comma)
In CAM configuration .. Z Levels .. Safety level

Using nn,nnn the output is Nxx G0 Znn
Using nn.nnn the output is Nxx G0 Znn.nnn

Drop down boxes are all in dot format.
Didn’t try anything else yet ;-)

Regards,
CVH

1815QCAD/CAMFeature RequestLowAdd Laser tool optionAssigned
0%
Task Description

Hi Andrew,

Creating G-code for cnc-laser, the laser-tool can not be correctly set at all.

Attached a laser tool proposal

1841QCAD/CAMFeature RequestLowQCAD/CAM Postprocessor "Hpgl": Add pen colors to HP/GL ...Assigned
0%
Task Description

Add SPx; with x being pen number from 1-8.

TODO:
- Which color corresponds to which pen number?
- What if there are more than 8 colors in a DXF files?

1844QCAD/CAMFeature RequestLowHP/GL (PLT) importAssigned
0%
Task Description

Hi Andrew

QCAD/CAM misses a hpgl.plt import. If gerber and G-code can, so should plt.

1846QCAD/CAMFeature RequestLowToolpath preset offsetsAssigned
0%
Task Description

Hi Andrew

A request for adding some fields to the toolpath

1877QCAD/CAMFeature RequestLowPost Processor TutorialAssigned
0%
Task Description

Hallo Andrew,

I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.

Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

2164QCAD/CAMFeature RequestLowAdd ability to pan the 3D view with a modifier key and ...Assigned
0%
1 Task Description

With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.

2213QCAD/CAMFeature RequestLowAllow editing Spindle Speed separately for each Toolpat...Assigned
0%
1 Task Description

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

2233QCAD/CAMFeature RequestLowMore selection options to select sheets for nestingAssigned
0%
Task Description

I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.

2307QCAD/CAMFeature RequestLowTools to create dogbones or corner overcut Assigned
0%
1 Task Description

The inside corners of profile tool paths have rounded inside corners. This occurs because the rounded outside the bit cannot make it all the way into the corner of the feature. Think of tracing the inside wall of a cardboard box with a can of soup. The can makes direct contact with the box walls, but its
round shape is unable to completely fit into the tight corners— there’s always a gap.

In a dog-bone overcut (see the figure in attachment), the inside profile corner is enlarged into a semicircle, allowing the sharp edges of the mating piece to slide through without interference.

When a dog bone is applied to the inside corners, as shown in the second figure in the attachment, the joints fit together nicely!

The following website explains what should be implemented More elegant CNC dogbones

There are two ways to implement this tool. Either you modify the original design (as implemented in Fusion 360) or you can do it at the moment you define the tool path (Estlcam allows you to do this for example). See the feature Corner overcut, on Estlcam website

Showing tasks 401 - 450 of 452 Page 9 of 10<<First - 6 - 7 - 8 - 9 - 10 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing