QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
2056QCAD (main)Feature RequestLowOption Duplicate layer (yy) inclusive all sub-layers.Assigned
0%
Task Description

If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done.
Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.

Current lack:
Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.

With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ... :-(

2057QCAD (main)Feature RequestLowMultiline toolAssigned
0%
Task Description

Implement a multiline tool.

2060QCAD (main)Feature RequestLowDialog box for Layer StatusAssigned
0%
Task Description

So far, layer status has only been implemented very rudimentarily.
I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.

2070QCAD (main)Feature RequestLowcropping imageAssigned
0%
Task Description

It may be useful to insert the “image cropping” function both in top / bottom - right / left mode, and with polyline

728QCAD (main)Performance IssueLowSlow loading of drawing with many block insertsAssigned
0%
1 Task Description

Slow loading of drawing with huge number of block inserts (more than 10000).

1801QCAD (main)Performance IssueLowlow perfomance in paper space and viewportsAssigned
0%
Task Description

Improving the performance of the exceptional use of the processors when switching from the model to the paper space (testing with the attached file) the functionalities of the commands for the viewports are too low in the paper space.

2063QCAD (main)Performance IssueLowBad performance while zooming inside layout block with ...Assigned
0%
Task Description

Zooming in and out is lagging to the point of unusable. This is happening in a layout block with the cursor pointing inside geometry with hatches. When the cursor is pointing outside the geometry zooming works as expected.
The attached file has a very simplified testcase that shows this problem almost in the same way as a more complex drawing with multiple layers and hatches.

edit: I also attached the more complex drawing because it is a bit unclear to me where the lagging stops. Outside the viewport or outside the paper.

I just noticed the selection box has the same problem!

1954QCAD/CAMReleaseLowRevised PWM Post ProcessorAssigned
0%
Task Description

Hallo Andrew,

I have revised the PWM Post Processor to Revision D.

1323QCAD (main)SuggestionLowImprove command line support in QCADAssigned
0%
Task Description

Hi,

As a typical command line draftsman (still using acad10 for dos, since microsoft doesn’t supoort Win NT anymore),
I noticed a severe lack on command line acces in QCAD.

For example I find the icon and pixel selecting methods within qcad very confusing and rude.

With the normal cad Select command I can select exactly what en how I want it.

I intend not to be rude, but I find my drawing screen littered all over with all kind of very specialist menu’s,
tools and options. Sorry, I just want to make a drawing at the natural intuitive way, as with a pencil.
So I use command line Commands, such as Move, Copy, Change, Select, a.s.o.
For a ‘Command scripting’ user (-batching is a different tool!-),
it seems to me logical these basic commands should be accessable.

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
0%
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

1678QCAD (main)SuggestionLowProperty Editor dialogAssigned
0%
Task Description

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239

1740QCAD (main)SuggestionLowMake unprintable layers also hidden in print previewAssigned
0%
Task Description

Make unprintable layers also hidden in print preview

1754QCAD (main)SuggestionLowWhen Selecting multiple blocks that contain the same at...Assigned
0%
Task Description

When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.

1789QCAD (main)SuggestionLowApplication Preferences / General / Performance :0Assigned
0%
1 Task Description

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

1851QCAD (main)SuggestionLowLateral surface of a coneAssigned
0%
Task Description

Module mise à plat d’un cone

Bonjour,

Serait il possible dans un futur d’ajouter un module de mise en plan de cone.

Une petite fenêtre sur lequel on donne par exemple :
1- Ø haut
2- angle de coupe du haut
3- hauteur du cône
4- Ø bas
5- angle du bas
6- épaisseur matière

Ce qui permettrai de sortir une mise en plan a plat de la forme

1915QCAD (main)SuggestionLowViewport does not rotate view-port when changed in pape...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport.

Actual

The object in the viewport changes but the viewport itself remains unchanged

Expected

That both the view-port and the object changes angle as the angle is updated

Motivation

If you abort the placement (but keep the angle) and go back to model-space and then redo the operation the view-port is rotated along the angle. It seems that the viewport only picks up the initial angle once the paper-space is open and ignores any changes thereafter

Workaround

1. Select the view-port per normal in model-space
2. Open the paper-space and set the wanted angle but do not place the view-port in paper space
3. Abort the placement on paper-space and redo the whole operation

Once the paper space is opened again the view-port will have the chosen angle

2072QCAD (main)SuggestionLowInserted and flipped block mirrors text and dimAssigned
0%
Task Description

Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.

Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.

Version 3.23.0 doesn’t shows this behavior.

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206

2075QCAD (main)SuggestionLowDraw order bug after insert bit mapAssigned
0%
Task Description

First post, so please excuse if I missed some forum rules etc...

I insert bit maps and trace over them to create DXF files for laser cutting burnout templates. If the edge of the bit map is coincident with a line I have drawn, it is not possible to select the line for offsetting, trimming etc. This is regardless of the draw order or handle number. It seems to happen most if the edge of the image and line are coincident with the X or Y origin. I also use fairly fat lines to make it easy to see. My default line width is 1mm. Not sure if that affects selection or not, but fatter lines don’t help the issue at hand.

Steps to reproduce...
insert bitmap at 0,0
draw horizontal and vertical lines starting at 0,0. (my lines are usually longer than the edges of the bitmap.
try to select one of the lines for offsetting. (Select the line in the area of the bitmap. There is no problem selecting the line where it extends past the edge of the bitmap.)

It does not matter if I insert the bitmap first and then draw lines, or draw lines first, insert bitmap and then change the draw order so the lines are on top. It is also not consistent on which axis is affected. It is usually both X & Y, but sometimes just one or the other.

Workaround is select the bitmap, then move it by 0.001 in any direction. Now the edges are no longer coincident and you can select your lines. The alternate workaround is to insert the image on another layer and then turn that layer off when you need to select a line on the edge of the bitmap.

1443QCAD (main)Bug ReportVery LowView > Status Bar remains uncheckedAssigned
0%
Task Description

Status Bar menu remains unchecked even it is toggled on or off

1691QCAD (main)Bug ReportVery LowIssue with Layouts after "File-Revert"Assigned
0%
Task Description

QCad 3.19.2 Professional, 64bit, Liux Mint

Case:
1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically.
2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .

For example can try on “flange.dxf”

1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
0%
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

1760QCAD (main)Bug ReportVery LowSelf-crossing polylines can't be cut twice at segment c...Assigned
0%
Task Description

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 

Regards

1765QCAD (main)Bug ReportVery LowErrors with polyline offsetAssigned
0%
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360° curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

1900QCAD (main)Bug ReportVery LowRemote shares initially not accessible.Assigned
0%
Task Description

My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.

While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.

Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.

Drag and Drop from a remote share will never work.

1905QCAD (main)Bug ReportVery LowView > Property Editor: Changing attribute of block cha...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947

1919QCAD (main)Bug ReportVery LowWrong order XY(Z) for Ordinate Dimension in property ed...Assigned
0%
Task Description

Win7pro Qcad Pro 3.22.1.2

In property editor
properties of an Ordinate Dimension

Without Show Z
DefPoint is displayed in order YX?

With Show Z
Origin is displayed in order XZY?
DefPoint is displayed in order YZX?
LeaderEndPoint is displayed in order ZXY?

Regards

1923QCAD (main)Bug ReportVery LowFaulty rendering Polylines with Global/Local Widths and...Assigned
0%
Task Description

Win7pro 32bit Qcad 3.23.0

Andrew,
The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.

In the attached drawing setting the Global Z of the inner poly to 5,10,...

The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly.
It also affects the projected widths of the line inversely, but not by changing the widths properties.

Pritty rare combination! True.
Qcad is 2D native! True.

Flatten will resolve this.

It is not a purely visual rendering fault, the poly will explode as such.

Maybe similar flaw as with uneven scaling blocks with arcs.
https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703

Regards

1974QCAD (main)Bug ReportVery LowFile > Print Preview: Cannot move paper in new drawingUnconfirmed
0%
Task Description

Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.

Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.

Affected versions tested:

Windows 64bit installer download, as of yesterday.
Linux 64bit build from git, about 20minutes ago.

For what it’s worth, this bug is not present in this previous git checkout:

Version:
3.21.1.0 (3.21.1)
Internet:
QCAD.org
Build Date:
Jul 2 2018
Revision:

Qt Version:
5.7.0
Architecture:
x86_64
Compiler:
gcc 6.3.1

Thanks for a great product.

2048QCAD (main)Bug ReportVery LowMove / Copy to current layer fails when reference point...Assigned
0%
Task Description

QCAD 3.24.2 / macOS x86_64 10.14.6

Starting with empty doc:
1. Draw any object (e.g. a rectangle) on layer 0.
2. Create new layer (”1”) with color, say yellow.
3. Select new layer
4. Select new object
5. Modify → Move / Copy
6. Click reference point
7. Click target point same as reference point
8. In “Move / Copy Options” dialog, select “Delete Original” and check “Use current layer and attributes.” Click OK.

The moved object stays on the layer it was previously on. Using “Move / Copy” as a quick way to move a selection between layers is not useful even though it appears to be the recommended way in a Google search.

Note: if “Keep Original” is selected instead, the copied object is placed on the current layer and the original object remains on its layer, as expected.

Note: if the target point is different from the reference point, the moved object is placed on the current layer as expected.

There are other workarounds too, cut / paste with “To current layer” checked seems to work, as does chaging the layer in the Properties Editor.

2050QCAD Community EditionBug ReportVery LowFlexPainter dosen't workAssigned
0%
Task Description

FlexPainter works in the Pro version of QCad but not in the Comunity one.
If it’s not supposed to works in the latter, maybe, it would be better to remove it from the menu (Misc > Script Examples > Mathematics).

2068QCAD Community EditionBug ReportVery LowNon-english text in upper/lower index becomes UTF codeAssigned
0%
Task Description

How to reproduce.

1. Create a text field with some non-english words in the upper index. (see attached pic1.png)
2. Save the project and close QCAD.
3. Run QCAD and open same project.
4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)

Tried different fonts - doesn’t help.

Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
CentOS Linux release 7.7.1908 (Core)

752QCAD (main)Feature RequestVery LowAdd support for the 3dConnexion Space Navigator (Pan an...Assigned
0%
3 Task Description

The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.

3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand

While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

1426QCAD (main)Feature RequestVery LowLoad drawings that were open when closing QCAD on start...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1649QCAD (main)Feature RequestVery LowAdd configuarable format options for saving blocks to l...Assigned
0%
Task Description

Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.

1788QCAD (main)Feature RequestVery LowNew snap: reference points of a block referencesAssigned
0%
Task Description

I know this was reported and fixed before ...

https://www.qcad.org/bugtracker/index.php?do=details&task_id=843

... but it looks like we have the issue now back with some kind of variation.

If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.

If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.

Edit: New Test drawing:

1920QCAD (main)Feature RequestVery LowEdit > Application Preferences: Add preference to disab...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447

1922dwg2bmpFeature RequestVery LowAdd error message when requesting raster for a non-exis...Assigned
0%
Task Description

It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D

See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453

2021QCAD (main)Performance IssueVery LowCannot work with big dwg filesAssigned
0%
Task Description

Openning a big file or doing any action in it, takes minutes to load.
Even dragging the scrollbar slightly left or right, takes mintues to redraw the canvas again, which makes QCAD un-usable for professional use.
Is there a way to make QCAD usable, after loading completed:
- Like suppressing edit until user says so,
- or taking snapshots of rendered canvases to another file and use it, as windows uses thumb.db ( for negative latency :P )

PS: I wish I could help a bit, but my hand are tied. I am just a java freak, I am opt to any idea of porting it to java, if she is still alive.

Tuğalsan Karabacak
EEE, MSc Mobile Comp & App, IWE

2011QCAD Community EditionSuggestionVery LowUpdate QCAD CE SpatialIndex module to latest versionAssigned
0%
Task Description

Building with the bundled version, 1.8.5, works fine.

When I try to build using the system version, which for Mageia Cauldron is 1.9.3, the build fails.

https://raw.githubusercontent.com/kekePower/mmbl/master/qcad/2019/12/11/20%3A13%3A48/log.qcad

Here is the current spec file for version 3.23.0.4.
https://svnweb.mageia.org/packages/cauldron/qcad/current/SPECS/qcad.spec?revision=1465894&view=markup

It looks like qcad is incompatible with versions above 1.8.5.

Are there plans to port to the new version?

Thanks in advance.

Showing tasks 351 - 393 of 393 Page 8 of 8<<First - 4 - 5 - 6 - 7 - 8

Available keyboard shortcuts

Tasklist

Task Details

Task Editing