QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  descSeveritySummaryStatusProgress
1870QCAD (main)Feature RequestLow Stretch tool / option to turn selection restriction on...Assigned
0%
Task Description

Hi,

since 3.19.2 the Stretch tool looks for any selection and follows the specification “Only stretch selected entities if there is a selection”.

That is a nice feature but it leads many times to confusing because I have to deselect a selection just because I need to use the stretch tool on something else on the fly. The same if I “forgot” a selection outside of my zoom which is still important for me. The stretch tool just won’t work without any message why not. My routine now is that I terminate every selection just before I use the stretch tool just not to be surprised by “why isn’t it working”?

It would be nice to have in the Stretch option bar a checkbox to turn the “only selection feature” on or off. QCAD should remember that setting.

1877QCAD/CAMFeature RequestLowPost Processor TutorialAssigned
0%
Task Description

Hallo Andrew,

I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.

Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?

1878QCAD (main)Feature RequestLowSnap > Distances from 2 Points: snap to point with give...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211

1886QCAD (main)Feature RequestLowSupport advanced tolerance settings for dimensionsAssigned
0%
2 Task Description

Add support for
- tolerance display (dimtol)
- upper limit (dimtp)
- lower limit (dimtm)
- tolerance precision (dimtdec)
- tolerance text size factor (dimtfac)
- tolerance suppress zeros, etc.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269

1887dwg2bmpFeature RequestLowAdd "-max-lineweight" option for dwg2bmpAssigned
0%
2 Task Description

Hi there,

A friendly request to add the option to set a maximum lineweight for raster conversions via dwg2bmp.

Depending on the LW configuration of the CAD file, rasterization operations sometimes yield terrible results (see attachment). This would also mirror the similar “-min-lineweight” options available on “dwg2svg” and “dwg2pdf” (although not on “dwg2bmp”).

See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=6298

Thanks!

1888dwg2bmpFeature RequestLowAdd support to disable hatch rendering on "dwg2bmp"Assigned
0%
1 Task Description

Hi!

A friendly request to add an option to disable hatch rendering on “dwg2bmp” conversions.

Depending on the nature of the conversion and the density of the hatch, this may render unintelligible images (see attachments). The option could look like “-t, -nohatch” to indicate hatches should be hidden before rendering. This could potentially become an option too for “dwg2svg” or “dwg2pdf.”

Amazing product, thank you so much!

1890QCAD (main)Feature RequestLowPossibility to address an QCAD extern font folderAssigned
0%
Task Description

Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD. :-)

The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.

1895QCAD (main)Feature RequestLowAdd support for block transformation matricesAssigned
0%
Task Description

Support transformations by transformation matrix for block references.

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=6333

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

1903QCAD (main)Feature RequestLowSaving layer settings, e.g. visibility status, associat...Assigned
0%
Task Description

In a medium complex drawing it may be too much details to have all layers in a drawing visible at once.

Instead a number of views would be created that saves not only zoom level and position but also what layers are visible and not (as appropriate for the purpose of that particular view). This is very cumbersome (to the extent it is not really realistic) to achieve today and requires a lot of duplication of both model and layers.

The advantage of adding this is the ability to have only one model (with multiple views) and avoid duplication of work and the risk of inconsistency inherent with many copies of the model.

As a further (and natural extension to this) would be the ability to used this functionality with view-ports to be able to create (possibly many) paper-spaces from a single model. This would however require view-ports to be aware of what view they are a window into. A single change in the model would then propagate to all defined view-ports and paper-spaces.

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

1917QCAD (main)Feature RequestLowAutomatic labels with static information of the drawingAssigned
0%
Task Description

I would like static information of the drawing (like scale, creation-date, modified-date, revision etc) to be available as automatic labels to be placed in the drawing (with selectable style, font etc)

This would greatly simplify the creatin of title sections in the drawing and making sure it is consistent with the actual drawing and not requiring manual “synchronization”.

1926QCAD (main)Feature RequestLowNo negative coordinate values ? (DO command)Assigned
0%
1 Task Description

Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !

Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command.
There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !

GW.G

1928QCAD (main)Feature RequestLowOptionnally 'Auto clean up' after generation of NaN / N...Assigned
0%
1 Task Description

Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props.
Some explicitly don’t and test their actions with isNull().

As these serve a purpose in some processes, trails of them can be part of the results.
For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line.
In a few cases its a desirable feature eg. controlpoint spline.
(Allthough there are no Null props involved with equal successively controlpoints)

Many problem post on the forum are related to Null - Zero and so on.

In some cases it can’t be undone by re-editing the drawing.
https://qcad.org/bugtracker/index.php?do=details&task_id=1925

If it can’t be undone by Undo/Redo it is a bug.
https://qcad.org/bugtracker/index.php?do=details&task_id=1757

In some cases there is a difference noticed after file save-close-open.

1930QCAD (main)Feature RequestLowOption disable "Auto Zoom on load" for saved "Layout Vi...Assigned
0%
Task Description

Hi,

my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.

But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.

Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?

1934QCAD (main)Feature RequestLowDiametric text - overlaidAssigned
0%
Task Description

Diametric text is always placed above a horizontal measurement.

I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.

To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.

A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.

Similarly for a vertical measurement, the text is overlaid and illegible.

When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).

Kind regards
Simon

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

1976QCAD (main)Feature RequestLowEnvelope at offset to a poly toolAssigned
0%
Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?t=6650

1977QCAD (main)Feature RequestLowCorresponding coordinate format Assigned
0%
Task Description

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

1982QCAD (main)Feature RequestLowmeasure DIN 1356Assigned
0%
Task Description

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

1983QCAD (main)Feature RequestLowTrim All or Bulk Break outAssigned
0%
1 Task Description

This is a trim method I am missing in Qcad.

20 years ago it existed in CadKey.
You had a bunch of lines or segments.
You defined a (new) line or segment as cutter.
‘Trim All’.
You pointed at the side of the cutter entity to trim all intersecting at that side.

Pritty the same as in this topic:
https://qcad.org/rsforum/viewtopic.php?t=5221

Only in rare cases I can use Husky’s workaround as pro.
It all depends on what else is in the clipping rectangle that is needed to trim all intended.
If of no use all single crossing entities have to be chosen one by one.

Regards,
CVH

1999QCAD (main)Feature RequestLowViewport: Add additional properties for controlling dim...Assigned
0%
1 Task Description

When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:

1)
E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed.
This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.

2)
Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.

The Viewport properties:
https://i.imgur.com/s07JtaB.png

2018QCAD (main)Feature RequestLowLayer visibility setting per view/view-portAssigned
0%
Task Description

In a medium complex drawing it’s often too much details to have all layers in a drawing visible at once. Also, it is of great importance to be able to have a single model to avoid duplication of work and risk inconsistency.

So i would like to create a number of views where each view has selected layers visible (that makes sense for the purpose of the view) and then assign the views to different layout blocks (using view-ports) in paper-space to be able to setup printing of several views on the same page/PDF

This also means that view-ports would have to be aware of what view they are displaying (if any besides the standard-view).
This will then make it possible for printouts of different views with selected layers visible (different for each view and view-port) and still have only one model. Today this is not possible.

As it is today the only limited workaround is to set the layers you want to display, print/PDF of that viewport on separate page, and then change it for the next page, and so on. The big drawback is that you cannot have two different views/view-ports on the same page with different layers visible. Also, for large drawing it is painful to have to do a lot of manual setup for each rendering of the complete drawing.

693QCAD (main)Feature RequestMediumSupport for external references (XREF)Likely to be implemented
0%
15 Task Description

Support for external references (XREF)

1443QCAD (main)Bug ReportVery LowView > Status Bar remains uncheckedAssigned
0%
Task Description

Status Bar menu remains unchecked even it is toggled on or off

1691QCAD (main)Bug ReportVery LowIssue with Layouts after "File-Revert"Assigned
0%
Task Description

QCad 3.19.2 Professional, 64bit, Liux Mint

Case:
1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically.
2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .

For example can try on “flange.dxf”

1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
0%
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

1760QCAD (main)Bug ReportVery LowSelf-crossing polylines can't be cut twice at segment c...Assigned
0%
Task Description

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 

Regards

1765QCAD (main)Bug ReportVery LowErrors with polyline offsetAssigned
0%
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360° curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

1900QCAD (main)Bug ReportVery LowRemote shares initially not accessible.Assigned
0%
Task Description

My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.

While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.

Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.

Drag and Drop from a remote share will never work.

1905QCAD (main)Bug ReportVery LowView > Property Editor: Changing attribute of block cha...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947

1919QCAD (main)Bug ReportVery LowWrong order XY(Z) for Ordinate Dimension in property ed...Assigned
0%
Task Description

Win7pro Qcad Pro 3.22.1.2

In property editor
properties of an Ordinate Dimension

Without Show Z
DefPoint is displayed in order YX?

With Show Z
Origin is displayed in order XZY?
DefPoint is displayed in order YZX?
LeaderEndPoint is displayed in order ZXY?

Regards

1923QCAD (main)Bug ReportVery LowFaulty rendering Polylines with Global/Local Widths and...Assigned
0%
Task Description

Win7pro 32bit Qcad 3.23.0

Andrew,
The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.

In the attached drawing setting the Global Z of the inner poly to 5,10,...

The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly.
It also affects the projected widths of the line inversely, but not by changing the widths properties.

Pritty rare combination! True.
Qcad is 2D native! True.

Flatten will resolve this.

It is not a purely visual rendering fault, the poly will explode as such.

Maybe similar flaw as with uneven scaling blocks with arcs.
https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703

Regards

1974QCAD (main)Bug ReportVery LowFile > Print Preview: Cannot move paper in new drawingUnconfirmed
0%
Task Description

Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.

Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.

Affected versions tested:

Windows 64bit installer download, as of yesterday.
Linux 64bit build from git, about 20minutes ago.

For what it’s worth, this bug is not present in this previous git checkout:

Version:
3.21.1.0 (3.21.1)
Internet:
QCAD.org
Build Date:
Jul 2 2018
Revision:

Qt Version:
5.7.0
Architecture:
x86_64
Compiler:
gcc 6.3.1

Thanks for a great product.

498QCAD (main)Bug ReportLowissue importing from AutocadAssigned
0%
Task Description

There is an issue importing from Autocad:
lines and quotes (both arrows and text) appear too much big (see attachment).
I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick.
Autocad’s dxf are opened with right line thickness but wrong quotes.
Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.

513TranslationBug ReportLowTranslation errorsAssigned
0%
Task Description

If you spot an error in the translated user interface of QCAD, please add a comment to this task or submit your translation at http://translate.qcad.org.
Thank you for your help!

Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu oder geben Sie Ihre Übersetzung ein unter http://translate.qcad.org.
Vielen Dank für Ihre Hilfe!

Si vous remarquez une erreur dans l’interface utilisateur traduite de QCAD, veuillez ajouter un commentaire à cette tâche ou soumettre votre traduction à http://translate.qcad.org.
Merci pour votre aide!

Si detecta un error en la interfaz de usuario traducida de QCAD, añada un comentario a esta tarea o envíe su traducción a http://translate.qcad.org.
Gracias por tu ayuda!

Se si rileva un errore nell’interfaccia utente tradotta di QCAD, si prega di aggiungere un commento a questo compito o di inviare la traduzione a http://translate.qcad.org.
Obrigado por sua ajuda!

Se você detectar um erro na interface de usuário traduzida do QCAD, adicione um comentário a esta tarefa ou envie sua tradução para http://translate.qcad.org.
Obrigado pela sua ajuda!

Als u een fout ziet in de vertaalde gebruikersinterface van QCAD, voeg dan een opmerking toe aan deze taak of stuur uw vertaling naar http://translate.qcad.org.
Bedankt voor uw hulp!

523QCAD (main)Bug ReportLowSelection tool button in CAD tool bar shows line tools ...Assigned
0%
Task Description

The selection tool is not accessible:

Click on Selection Tool icon - left panel:

Left panel then shows line tool options.

Click “back” button at top of left panel:

Left panel then shows selection options.

Click an option icon:

Left panel then shows line tool options again.

584QCAD (main)Bug ReportLowLibrary Items können unbrauchbar gemacht werden durch l...Assigned
0%
Task Description

Nach einigen Überraschungen ....

Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....

Fallbeispiel 1:
Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt.
Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat.
Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will.
In der Blocklist ist es natürlich immer noch verfügbar.
In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden.
Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt.
Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.

Fallbeispiel 2:
Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.

Fallbeispiel 3:
Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....

Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?

641QCAD (main)Bug ReportLowNo warning is displayed when lengthen tool is used with...Assigned
0%
Task Description

Command ‘Lengthen LE’ will extend most arcs but not all (2 arcs in the attached drawing do not work)! There is no obvious reason for this from the users point of view.

645QCAD (main)Bug ReportLowInch - Layerdata / Linewight still in mm ...Assigned
0%
Task Description

Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....

I like it ;-) ... but maybe I’m the only one :-(

665QCAD (main)Bug ReportLowPossible printing error on Linux fedora 16?Assigned
0%
Task Description

On behalf of et76
Possible printing error using Linux 16 - needs further testing!
Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

Au nom de et76
Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests!
S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

689QCAD (main)Bug ReportLowGrid spacing info not shownAssigned
0%
Task Description

OpenSuSE 12.2: the grid info display is not displayed:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2178&view=unread#unread

700QCAD (main)Bug ReportLowSaved 'hatched' block loses hatching when using isometr...Assigned
0%
Task Description

Hatched block loses hatching when using isometric projection tool:
See -http://www.qcad.org/rsforum/viewtopic.php?f=32&p=7063#p7063

When manipulating a saved hatched block with the isometric tool it loses the hatching unless the block is exploded.

Is this normal behaviour here? or a bug?

705QCAD (main)Bug ReportLowVerwaltung Library Resourcen und Favoriten ....Assigned
0%
Task Description

Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....

Hier meine Gedanken ....

In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.

Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.

Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX ;-) Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.

Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!

OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”:
QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!

Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.

714QCAD (main)Bug ReportLowIsometric view tool bar doesn`t remain ' docked'.Assigned
0%
Task Description

Win 7 - 64
Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.

721QCAD (main)Bug ReportLowVertical dimensions imported as horizontal dimensionsAssigned
0%
Task Description

Vertical dimensions created with 3rd party applications are sometimes imported as horizontal dimensions with length 0. Changing the angle in the property editor fixes the problem.
Problem occurs in QCAD 2.2 and QCAD 3.0.

729QCAD (main)Bug ReportLowPreferences not stored on some installationsAssigned
0%
Task Description

Preferences not stored on some installations

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&view=unread#unread

733QCAD (main)Bug ReportLowQCAD Trial: batch tool dwg2bmp produces no outputAssigned
0%
Task Description

Some users are experiencing problems with dwg2bmp.

See forum at:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2272&view=unread#unread

735QCAD (main)Bug ReportLowAngle dimensioningAssigned
0%
Task Description

See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread

Showing tasks 301 - 350 of 381 Page 7 of 8<<First - 4 - 5 - 6 - 7 - 8 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing