|
693 | QCAD (main) | Feature Request | Medium | Support for external references (XREF) | Likely to be implemented | |
24 |
Task Description
Support for external references (XREF)
|
|
694 | QCAD (main) | Feature Request | Low | User coordinate systems (UCS) | Assigned | |
11 |
Task Description
UCS support.
|
|
763 | QCAD (main) | Feature Request | Low | Hatching with just one click | Assigned | |
8 |
Task Description
My task: To hatch an area.
Right now, if I want to fill an area with a hatch pattern, I have to select all the enclosing objects (lines, arcs) and then I can select the hatch tool. That can be under some circumstances a tedious task. To illustrate this, I created a simple example (see Attachment 1: Hatching.png).
Step 1: Create a rectangle. Step 2: Draw four vertical lines. Step 3: Select the four lines surrounding the first area. –> Problem! The horizontal lines are too long. Step 4: Divide the long horizontal lines of the rectangle where the vertical lines touch. Now the lines surrounding the three areas can be selected. Step 5: Hatch the selection. Done.
Just for fun try recreating my second example (see Attachment 2: Hatching2.png)
Therefore I would like to suggest a far more simple approach.
Step 1: Select the Hatch Tool. Step 2: Click inside the area you would like to be hatched. Done.
Of course that would mean that the hatch style is already pre-defined and can be changed later, if needed.
In this way productivity can be increased by ... [fill in you own estimate] ... times.
Example 2 would need only 13 clicks to hatch all the areas (including the hatch tool button).
|
|
1428 | QCAD (main) | Feature Request | Low | Snap middle of the minimum distance between two entity'... | Assigned | |
5 |
Task Description
Hi,
from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.
Pic 1: Given situation Pic 2: Result after using this new snap tool
Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?
|
|
1224 | QCAD (main) | Feature Request | Low | Revision clouds | Likely to be implemented | |
5 |
Task Description
Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.
|
|
2018 | QCAD (main) | Feature Request | Low | Layer visibility setting per view/view-port | Assigned | |
5 |
Task Description
In a medium complex drawing it’s often too much details to have all layers in a drawing visible at once. Also, it is of great importance to be able to have a single model to avoid duplication of work and risk inconsistency.
So i would like to create a number of views where each view has selected layers visible (that makes sense for the purpose of the view) and then assign the views to different layout blocks (using view-ports) in paper-space to be able to setup printing of several views on the same page/PDF
This also means that view-ports would have to be aware of what view they are displaying (if any besides the standard-view). This will then make it possible for printouts of different views with selected layers visible (different for each view and view-port) and still have only one model. Today this is not possible.
As it is today the only limited workaround is to set the layers you want to display, print/PDF of that viewport on separate page, and then change it for the next page, and so on. The big drawback is that you cannot have two different views/view-ports on the same page with different layers visible. Also, for large drawing it is painful to have to do a lot of manual setup for each rendering of the complete drawing.
|
|
972 | QCAD (main) | Feature Request | Low | Distribute equally option ... | Assigned | |
5 |
Task Description
It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.
|
|
1488 | QCAD (main) | Feature Request | Low | Dimension text position | Assigned | |
5 |
Task Description
This one is a really important one for me, as currently I am doing a lot of dimension and annotation drawings. I would like to request an option to be added to the dimension settings for both drawing and application settings to be able to choose whether the dimension text is to the right or left side or over the top or underneath the dimension line. This would help tremendously when a lot of dimensions are needed!
Regards
Clive
|
|
1723 | QCAD (main) | Feature Request | Low | Detecting overlapping line / arc segments | Assigned | |
5 |
Task Description
Add a tool to detect overlapping segments or lines and arcs. Similar like the “overkill” command in other CAD systems.
|
|
1165 | QCAD (main) | Feature Request | Low | New Create Spiral Tool | Assigned | |
4 |
Task Description
A new tool to create Spirals would be great to have, with an option to restrict the decline to achieve to draw either Logarithmic or Linear styles.
Please see related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3236
|
|
1721 | QCAD (main) | Feature Request | Low | Insert table tool | Assigned | |
4 |
Task Description
Hi Andrew,
I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)
Many thanks
Clive
|
|
895 | QCAD (main) | Feature Request | Low | Area calculation based on existing entities | Assigned | |
4 |
Task Description
Use case:
Start tool
Choose one entity of the contour
If contour is closed, area of closed contour is calculated an printed in the command line history
Configuration parameters: segment length for arc interpolation
|
|
1596 | QCAD (main) | Feature Request | Low | View > Selection Filter: add filter for custom properti... | Assigned | |
3 |
Task Description
See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=4840
|
|
1983 | QCAD (main) | Feature Request | Low | Trim All or Bulk Break out | Assigned | |
3 |
Task Description
This is a trim method I am missing in Qcad.
20 years ago it existed in CadKey. You had a bunch of lines or segments. You defined a (new) line or segment as cutter. ‘Trim All’. You pointed at the side of the cutter entity to trim all intersecting at that side.
Pritty the same as in this topic: https://qcad.org/rsforum/viewtopic.php?t=5221
Only in rare cases I can use Husky’s workaround as pro. It all depends on what else is in the clipping rectangle that is needed to trim all intended. If of no use all single crossing entities have to be chosen one by one.
Regards, CVH
|
|
1126 | QCAD (main) | Feature Request | Low | Suggestion for Dimension Location setting | Assigned | |
3 |
Task Description
Please seet topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124
|
|
2182 | QCAD (main) | Feature Request | Low | Select > Select Previous | Assigned | |
3 |
Task Description
Select the previously selected entities.
|
|
734 | QCAD (main) | Feature Request | Low | Possibility to distribute a selection equal to each oth... | Assigned | |
3 |
Task Description
It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...
Screenshot: First row: Befor / Second row: after
|
|
704 | QCAD (main) | Feature Request | Low | Old Hatch Function | Assigned | |
3 |
Task Description
It would be nice to implement the old hatch function as a tile function in parallel with the newer more industry standard hatch function. A tile function that would allow overlap +/- would be even better, and a great productivity boost, almost like an array within a set of bounds.
Thanks, Bob
|
|
1628 | QCAD (main) | Feature Request | Low | Move / Copy and snap tangential | Assigned | |
3 |
Task Description
Please see:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601
|
|
1206 | QCAD (main) | Feature Request | Low | Link drawings with each other to update layers, blocks | Assigned | |
3 |
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3410
|
|
766 | QCAD (main) | Feature Request | Low | Layer List: Add "Lock All Layers" | Assigned | |
3 |
Task Description
To improve useability/efficiency I would like to propose the following changes/additions to the layer list:
1) Combining the show and hide button into one button.
Clicking once will hide all layers, clicking again will show them all again.
2) A “lock/unlock” button.
Clicking once will lock all layers, clicking again will unlock them all again.
Regarding the icons I suggest that instead of show both the black and grey version of the eye/lock, you could switch between them depending on the state the switch-button is in. Also the mouse-over-text could/should change with the state.
|
|
228 | QCAD (main) | Feature Request | Low | Insert current date (and other fields) | Assigned | |
3 |
Task Description
Insert field into drawing that displays current date, file name, ...
|
|
2191 | QCAD (main) | Feature Request | Low | Extend the functionality of the Reorder tool | Assigned | |
3 |
Task Description
Add functions to the Reorder tool, similar to the functions of the counter tool, undo last step and start at any number, allowing corrections and restarting the tool part way through.
See the discussions at https://qcad.org/rsforum/viewtopic.php?f=32&t=8170
|
|
1470 | QCAD (main) | Feature Request | Low | Double line tool request | Assigned | |
3 |
Task Description
I would love to have a ‘Double Line’ tool in QCAD.
For me this would be such a time saver when drawing out building floor plans in QCAD.
|
|
952 | QCAD (main) | Feature Request | Low | Dimensions: manually control arrow position | Assigned | |
3 |
Task Description
See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.
The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.
|
|
741 | QCAD (main) | Feature Request | Low | An additional Radius Measurement tool ... | Assigned | |
3 |
Task Description
It would be nice to have an additional Radius Measurement tool with short leads. The current Radius tool shows always the lead line to the center of the radius what is in many cases not useful.
I’m not asking for a workaround
|
|
752 | QCAD (main) | Feature Request | Very Low | Add support for the 3dConnexion Space Navigator (Pan an... | Assigned | |
3 |
Task Description
The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.
3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand
While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.
|
|
618 | QCAD (main) | Feature Request | Low | user defined lineweight | Assigned | |
2 |
Task Description
To have the option to set your own ‘user defined’ line weight.
|
|
779 | QCAD (main) | Feature Request | Low | Turning detailed view on/off | Assigned | |
2 |
Task Description
My system: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz and 8 GB of RAM and NVIDIA GT218 (GeForce 210)
For a normal drawing displaying it in all detail is a good thing and the performance of my quad-core system is more than adequate.
But I discovered (or rather experienced) that when putting a large collection of individual drawings of gears onto one big sheet (960 mm x 600 mm - preparation for laser cutting), the performance was so bad that I had to wait several seconds (>10 sec) for each step in the process of arranging all the parts on the layer.
Request: It would be a big help and performance booster if you could disable the detailed view of each part/layer and only draw a rectangle to visualize the outline of the part.
Please take this in consideration. Attached you find an example of how that could look like. (Actually when pasting a drawing from the clipboard you already do that.)
|
|
784 | QCAD (main) | Feature Request | Low | Turn text into hatched polylines | Assigned | |
2 |
Task Description
Would it be possible to add a feature which turns selected text into solid fill hatched polylines?
That would make it possible to migrate the drawing from one computer system to another without having to worry whether the used font is installed on both systems, like when sending a drawing to a manufacturer for laser engraving.
Right now I can do it by hand, letter by letter, and that is a rather labour-intensive task.
|
|
2091 | QCAD (main) | Feature Request | Low | Toggle redrawing of hatches | Assigned | |
2 |
Task Description
Because modifying hatches have lag issues I’d like to propose a toggle that turns of the redrawing/rendering of the hatch. Especially while modifying the hatch.
The hatches always have a boundary that can be worked with right? So when we move or stretch the hatch we can still see the boundary and its handles to perform all the actions.
This could be a new view mode that turns of the view of the interior/pattern of the hatch but leave the boundary of the hatch. Or the draft mode can be extended to include simplified hatches while modifying.
Also see the discussion
|
|
708 | QCAD (main) | Feature Request | Low | To re-introduce Tile and Cascade window options | Assigned | |
2 |
Task Description
To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.
|
|
516 | QCAD (main) | Feature Request | Low | To add option to 'print only' selected area. | Assigned | |
2 |
Task Description
To add the option to ‘print only’ selected area in a drawing.
|
|
1886 | QCAD (main) | Feature Request | Low | Support advanced tolerance settings for dimensions | Assigned | |
2 |
Task Description
Add support for - tolerance display (dimtol) - upper limit (dimtp) - lower limit (dimtm) - tolerance precision (dimtdec) - tolerance text size factor (dimtfac) - tolerance suppress zeros, etc.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269
|
|
2127 | QCAD (main) | Feature Request | Low | Snap for predicted intersections while using "Restrict ... | Assigned | |
2 |
Task Description
I would like to request a new kind of snap: a “Restricted Intersection” snap that appears at the point where an entity would intersect with a line drawn from Relative Zero that fulfills the current EL criteria. “Restricted Intersection” snaps would be similar to other Relative Zero-based snaps (like “Perpendicular” and “Tangential”), but would predict the point of the snap from the EL constraints instead of the characteristics of the entity being snapped to. Naturally a value of 0 for angle or length would result in that constraint being ignored.
Additional operational flexibility could be achieved by allowing the snap to exist regardless of whether EL is actually in use. To be useful this would probably require determining snap locations based on angle OR length as opposed to angle AND length.
Implementing this new snap would allow, for example, for easily drawing a line of unknown (but determinable) length at a specified angle between a given point and a given entity (see discussion here), with the “Restricted Intersection” snap ensuring that the endpoint of the new line forms an intersection with the entity in question. Currently the same goal can be achieved a couple of different ways, but they all involve at least two separate steps.
|
|
1187 | QCAD (main) | Feature Request | Low | Scale possibility for Info tools ... | Assigned | |
2 |
Task Description
Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”. It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.
|
|
1627 | QCAD (main) | Feature Request | Low | revision cloud | Assigned | |
2 |
Task Description
how do i draw revision cloud in Qcad pro or when do you will implemented it
|
|
1027 | QCAD (main) | Feature Request | Low | Rectangle with a 3 point determination ... | Assigned | |
2 |
Task Description
Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.
We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.
My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.
1. First point: start
2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle
3. third point: determination second side (height?)
I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...
|
|
1285 | QCAD (main) | Feature Request | Low | Property Painter | Researching | |
2 |
Task Description
Easy transfer of properties from one entity to others
|
|
770 | QCAD (main) | Feature Request | Low | Polyline tool to delete segments between two nodes, lea... | Assigned | |
2 |
Task Description
I guess this is a case of wording and wrong expectations.
The polyline tool “Delete Segments between two nodes” removes nodes, but not segments as the title and the icon suggests.
I propose to rename it to “Delete Nodes between two nodes”.
A tool which actually removes line segments from a polyline, leaving gaps, could indeed be useful to some users.
I think of a straight polyline with several segments. Then I remove some segments. I end up with a polyline with “holes” in it. Now I could stretch that polyline and all the remaining segments and holes stretch proportionally. Could be handy some times.
|
|
1281 | QCAD (main) | Feature Request | Low | PDF Import | Assigned | |
2 |
Task Description
Not too sure if this would be possible for QCAD, but an option to open/import pdfs would be good.
|
|
1356 | QCAD (main) | Feature Request | Low | Option to lengthen/Shorten from both ends of entity at ... | Assigned | |
2 |
Task Description
It would be helpful to have the added option to lengthen/Shorten from both ends of entity at the same time.
|
|
620 | QCAD (main) | Feature Request | Low | option to have horizontal dimension info using vertical... | Assigned | |
2 |
Task Description
Some times I need to have the dimension info using the Vertical Dimension tool displayed horizontally. See attached image: Possibly this option could be added to the Label drop down menu.
|
|
1364 | QCAD (main) | Feature Request | Low | New Tool -'Run Parallel with' | Assigned | |
2 |
Task Description
New Tool request:
When drawing a line it would be good to have a tool/option to ‘run parallel with’.
For example start to draw a line and choose ‘run parallel with’, select appropriate line to draw parallel with!
|
|
1362 | QCAD (main) | Feature Request | Low | new layer tool: Toggle visibility all | Assigned | |
2 |
Task Description
Hi,
I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go. Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.
The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.
And I’m confident - there are many more useful scenarios for a tool like this one ...
pics: “Toggle visibility all” with one click:
|
|
767 | QCAD (main) | Feature Request | Low | Merging/Combining segments of a straight line into one | Assigned | |
2 |
Task Description
Sometimes you end up with a straight line which is broken/split into several parts. It would be great to have a tool to merge/combine these segments into one.
That would be the opposite/complementary tool to the “Split Entities” tool.
|
|
758 | QCAD (main) | Feature Request | Low | Lengthen/Shorten tool - add additional option | Assigned | |
2 |
Task Description
When using the Lengthen/Shorten tool it would be good to have an additional option to be able to pick a point to lengthen or shorten to.
|
|
1127 | QCAD (main) | Feature Request | Low | Leaders: spline shaped | Likely to be implemented | |
2 |
Task Description
Add support for spline shaped leaders
|
|
1674 | QCAD (main) | Feature Request | Low | Layouts and Viewports: duplicate layout block | Assigned | |
2 |
Task Description
Duplicate layout blocks
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241
|
|
1552 | QCAD (main) | Feature Request | Low | Layers: assign different color for printing | Assigned | |
2 |
Task Description
Original request:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4768
|