QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategory  descTask TypeSeveritySummaryStatusProgress
798QCAD (main)Feature RequestLowelaborate on purge toolAssigned
0%
1 Task Description

Modify the “purge layer” tool to preserve empty layers with a locked status.
see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386

817QCAD (main)Feature RequestLowSnap and cut all intersection in a given area tool ...Assigned
0%
1 Task Description

As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch.
To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries.
The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....

Clive mentioned on this:
Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.

823QCAD (main)Feature RequestLowAdd Midpoint Handles to Lines and PolylinesAssigned
0%
1 Task Description

The Midpoint Handles should be used to move Polyline Segments and lines. This would add easy to access stretch functionality.
Combined with a shortcut(hold down shift or alt etc.) to fix the movement to be orthogonal to the line this would bring a lot of extra value.
It would also be possible to to have another shortcut to easily insert nodes to Polylines (again hold shift or alt etc.)

839QCAD (main)Feature RequestLowGrid / Meta Grid info + Drawing Unit Info ...Assigned
0%
1 Task Description

At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings.
It would be nice to have additional the Info for the drawing unit ...

849QCAD (main)Feature RequestLowMake maximum visible reference points of selection conf...Assigned
0%
1 Task Description

Provide configuration option to raise / lower maximum reference points that are shown for selected entities (currently fixed to 1000).

Original report:

Imported a spline-dxf from adobe illustrator. Converted the spline to polyline with explode command. Then no anchor points / vertex points / vertices were showing anymore. Simplified the polyline so that it had less than 1000 points. Vertices became visible.

I think some freeform objects need actually more than 1000 vertices. Also them need to be edited. Please increase the amount of vertices showing to biginteger

regards

Benjamin

853QCAD (main)Feature RequestLowKeep selection after undo ...Assigned
0%
1 Task Description

If I move something and it went wrong I can easily undo the last move and start over without the need of a re-selection.
If I copy something and it went wrong I can undo the last copy but I have to re-select everything again.

It would be nice to keep the once chosen selection in both “undo” situation!

Same with similar functions like rotate etc. ....

860QCAD (main)Feature RequestLow"Create Library item from selection" default Path ...Assigned
0%
1 Task Description

Default Path for “Create Library item from selection” / “Save us” is C:\Programme\QCAD pro 3.1.6 ...
... regardless of the settings in the “Application Preferences / Library Browser / for Library Sources.
And QCAD doesn’t remember the last path choice ....

If I have to save 50 Library Items I have to navigate 50 times thru my system to find - the same place.

It would be nice if QCAD would point in first place to the Library Source or, at least, remember the last used path ... ;-)

894QCAD (main)Feature RequestLowModify - Clip to Rectangle: copy area to clipboardAssigned
0%
1 Task Description

New mode for clip to rectangle: copy contents of rectangular area to clipboard.

908QCAD (main)Feature RequestLowLibrary Browser Block Delete FunctionAssigned
0%
1 Task Description

It would be very helpful if the library browser had a delete function.

I know that this can be very risky for some people, but it is the easiest
way to see clearly what you delete.

Regards
Henry

923QCAD (main)Feature RequestLowDiagramming (Intelligent Orthogonal Connectors)Assigned
0%
1 Task Description

Hi,

With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.

927QCAD (main)Feature RequestLowFurther options for the 'Add Measurement' toolsAssigned
0%
1 Task Description

Absolutely love the new options for adding the measurements in the current drawing.

I would like to see an additional option for only adding the text and not the lines also, maybe a simple check box would suffice here.

Of course at the moment I am able to use the property editor to select only the lines and move to a new layer and hide!

962QCAD (main)Feature RequestLowDefault save / open directoriesAssigned
0%
1 Task Description

Add the option to use a fixed path for the save to, open and CAM export directories.

(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)

986QCAD (main)Feature RequestLowDetect duplicates - only on selected areaAssigned
0%
1 Task Description

It would be useful to have an additional option to only detect duplicates on user defined selection of drawing.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145

1023QCAD (main)Feature RequestLowArrange points on a plan according to variation of dist...Assigned
0%
1 Task Description

Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances

1044QCAD (main)Feature RequestLowRadian measure symbol for Geometry labeling ...Assigned
0%
1 Task Description

We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...

It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.

1051QCAD (main)Feature RequestLowInfo tool, polygonal area, possibility for a postfix la...Assigned
0%
1 Task Description

... would be nice.

If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².

I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ... ;-)

1092QCAD (main)Feature RequestLowNew tool: draw trace entitiesAssigned
0%
1 Task Description

Add tool to construct new trace entities.
Trace entities can currently only be loaded from DXF/DWG.

1099QCAD (main)Feature RequestLowAdd Leader with text and number bubbleAssigned
0%
1 Task Description

Having leader with numbers and text would be awesome to better interact with the drawing and making BOM lists.

Currently it takes too mush time to make the leaders with text and number bubbles.

1100QCAD (main)Feature RequestLowAdd drag dimension (snap) along dimension lineAssigned
0%
1 Task Description

In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.

This is very useful when the two lines the needs a dimension are close together, or overlapping with another.

Attached is two images one for autocad and one for Qcad

1102QCAD (main)Feature RequestLowRay reference pointAssigned
0%
1 Task Description

Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.

It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.

1128QCAD (main)Feature RequestLowText: automatically wrap text at text box widthAssigned
0%
1 Task Description

Add support for automatic text line wrapping for multiline text entities.

1157QCAD (main)Feature RequestLowDimension settings - arrowhead styleAssigned
0%
1 Task Description

A ‘non -filled’ arrowhead would be good to have also.

1185QCAD (main)Feature RequestLowImporting Tables (CSV)Assigned
0%
1 Task Description

Import tables in CSV format and display them in the drawing as lines and text.

1214QCAD (main)Bug ReportLowArray of blocks -> Clipboard -> "flip pasted entities" ...Assigned
0%
1 Task Description

Case:

Select a block array,
put it with “Copy with reference” or “Cut with reference” into the clipboard,
choose a reference point which isn’t in the center of the array,
use the paste tool / with option “flip pasted entities”

If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point.
If I try to flip in both directions at the same time - you can’t see this effect.

1282QCAD (main)Feature RequestLowChangeable color of the selection bar in layer list. Assigned
0%
1 Task Description

Changeable color of the selection bar in the layer list.
Now the color of the bar is darkblue and the underlaid icons are black and are not readable.

1287QCAD (main)Feature RequestLowInformation tool shows absolute units in print previewAssigned
0%
1 Task Description

With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units.
So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.

See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

1288QCAD (main)Feature RequestLowPrint Preview Scaled RulersAssigned
0%
1 Task Description

Would be nice, if in print preview QCAD rulers would switch to paper dimensions. Chat here http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

After all, print preview is not just the drawing on white, isn’t it? Everything else should stay in drawing units. Just the rulers, maybe a preference?

1312QCAD (main)Feature RequestLowMake dimension label decimal separator configurableAssigned
0%
1 Task Description

Make dimension label decimal separator configurable (DIMDSEP).

1337QCAD (main)Feature RequestLowAlternate units for dimensionsAssigned
0%
1 Task Description

Add support for alternate units for dimension style, for example to display units in mm and in.

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
0%
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

1372QCAD (main)Feature RequestLowDistance Point to Point - option for 'added' distancesAssigned
0%
1 Task Description

It would be useful to have an additional option to be able to count/add up consecutive distances measured with this tool ;)

1373QCAD (main)Feature RequestLowLine From Angle - additional option to select exisitng ...Assigned
0%
1 Task Description

Often I find myself clicking on an existing line to determine the angle from the property editor, then copying and pasting this info into the angle field, it would be so very useful to have an additional option in the ‘Line from Angle’ tool to be able to pick an existing entity which would automatically register and fill in the angle for me,then all I would need to do would enter the length required.

1446QCAD (main)Feature RequestLowNew Polygon toolAssigned
0%
1 Task Description

Hi,

if I need to design a bolt circle (circle on circle) and the single bolt diameter and the quantity of circles are given then I can use the QCAD Polygon Tool “Polygon 2 Points of Side” ... but for the Length of the side I have to do a workaround (Line with this length) to determine the desired length.

It would be very convenient to have an additional tool for a Polygon which has the possibility to ask me for the center, corners and the length of the sides.

1449QCAD (main)Feature RequestLowProperty Editor: show centroid of polylinesAssigned
0%
1 Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320

1452QCAD (main)Feature RequestLowColour opacity optionAssigned
0%
1 Task Description

Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?

related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715

1462QCAD (main)Bug ReportLowMac Trackpad zoom gesture not working as expectedAssigned
0%
1 Task Description

Hi,

I am using mac version and I have annoying issue with trackpad.
I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows.
Mouse wheel / two finger swipe: Scroll (Trackpad...
Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around)
Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page)
Reverse mouse wheel direction for zoom :unticked
Mouse wheel zoom factor: 1.02

Things work as expected:

  • panning with two finger swipe
  • and the rest

Issue I am experiencing:

Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler.
The mouse point remains where it is.

Workaround:
Reset viewpoint with autozoom and navigate around.

Expected zoom behaviour:
I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

1471QCAD (main)Feature RequestLowFile > Open file locationAssigned
0%
1 Task Description

When working with several files is normal also to work in several folders, this can be confusing, expecially in the case where there are different folders with equal file names.
I propose the creation of a “Open file location”. This, probably under the main menu, “File”, when clicked would open the standard
“file explorer” with the folder that contains the current file already selected.
It would be quite similar to the windows 8/10 “Open file location”.

1489QCAD (main)Feature RequestLowEdit > Drawing Preferences > Dimensions: Add option to ...Assigned
0%
1 Task Description

It would be extreamly useful to have an option to either use - or not use leader lines in the standard horizontal/vertical dimension line tools, some of the drawings I’m working on need the ‘standard’ looking dimensions with leader lines and some don’t. its a real pain to have to select - explode and delete all the leaders I don’t need.

Hoping for an option

Regards

Clive

1502QCAD (main)Feature RequestLowInfo tool / Setting for Font and Size ... Assigned
0%
1 Task Description

It would be nice if the Info Tool / Add Measurement to drawing option would use the same settings like the “Dimension settings” for Font and Text height. It’s a kind of similar function in a drawing and should have the same style. Maybe with an on/off switch?

1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

1541QCAD (main)Feature RequestLowView > Zoom > Zoom In/Out: Make zoom factor configurabl...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

1555QCAD (main)Feature RequestLowExport list of points.Assigned
0%
1 Task Description

Hello
It would be great when you can add a function to export a selected object as a list of points.
Is it possible to add?

Autodes DWG TrueView 2017 has this function and it is very useful.
Here you can see a screenshot of this function.

1577QCAD (main)Feature RequestLowPostfix for DIM / Remember last DIM Label ...Assigned
0%
1 Task Description

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

1613QCAD (main)Feature RequestLowAdd Orthogonal Option to Angelur DIM Tool ...Assigned
0%
1 Task Description

... please see below:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1663QCAD (main)Feature RequestLowFeature Request: Export Layers as New DrawingAssigned
0%
1 Task Description

Hi!

in many tasks in qcad I ended up exporting one or several layers into individual files for some cnc jobs or further processing. So the steps I usually do are:

  • select all elements on the layer
  • paste into new drawing
  • sometimes rename layer names or attributes
  • adjust dimension settings
  • save and give name for drawing

Sometimes I have up to 100 layers I need to export like this, so an automatic export for all would be time saving too. But very often a “single click” export method would also help a lot. (e.g. inside the layer list an entry in the right click menue like “save as new file”). Also a multiple selection would be handy if more that one layer should end up in the new file. (e.g. select the three layers that need to be in the new document, then right click and save as new file). Maybe this is too much of changes needed inside the layer list - so something like a separate layer export dialogue would make sense.

When exporting many layers some variables for automatic naming of layers and filename would make sense e.g. user can specify basename_%L.dxf to get the basename_layername.dxf or just an increasing number.

For layers and attributes it is often needed to give a layer a certain name or color for different cnc processes (e.g. engraving and cutting for lasers) or to put everything on layer “0” because of some old CAM software that only supports content on layer 0.

probably many more details would make sense that I didn’t think of yet...

kind regards
Martin


1673QCAD (main)Feature RequestLowLayouts and Viewports: support polygonal viewportsAssigned
0%
1 Task Description

Add support for polygonal viewports

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1674QCAD (main)Feature RequestLowLayouts and Viewports: duplicate layout blockAssigned
0%
1 Task Description

Duplicate layout blocks

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

Showing tasks 101 - 150 of 399 Page 3 of 8 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing