QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
693QCAD (main)Feature RequestMediumSupport for external references (XREF)Likely to be implemented
0%
20 Task Description

Support for external references (XREF)

2117Command line toolsBug ReportLowBBOX inconsistent outputAssigned
0%
1 Task Description

When I run bbox with the attached file I get inconsistent results if I run it 6 or 10 times.

Sometimes the size is 448979.2349223149/310815.2964427199 (it thinks that there is an object at 0,0)
sometimes it is 338.0789223148604/302.31644271989353 (this is what I think is correct)

[email protected]:/opt/qcad-3.25.2-pro-linux-x86_64$ ./bbox test.dwg
QCAD version 3.25.2
Warning: RPropertyTypeId::generateId: property already initialized: 7RObject : “” : “Invisible” 15:59:40: Debug: calling odInitialize
15:59:42: Debug: dropped global XDATA (no res buf): “ViewportCenter” Min: 0/0
Max: 448979.2349223149/310815.2964427199
Size: 448979.2349223149/310815.2964427199

[email protected]:/opt/qcad-3.25.2-pro-linux-x86_64$ ./bbox test.dwg
QCAD version 3.25.2
Warning: RPropertyTypeId::generateId: property already initialized: 7RObject : “” : “Invisible” 15:59:49: Debug: calling odInitialize
15:59:51: Debug: dropped global XDATA (no res buf): “ViewportCenter” Min: 448641.156/310512.98
Max: 448979.2349223149/310815.2964427199
Size: 338.0789223148604/302.31644271989353

2115QCAD (main)SuggestionLowMove toolbars with negative positions to 0 positions Assigned
100%
Task Description

As it can be seen in the attached image, QCAD toolbars may dock to a position slightly outside the visible area of the screen. After having docked there, I have not been able to move them any more. Their current position is just in the middle of the screen.

The position of the toolbars remains the same after the deinstallation of QCAD, shutting down, restarting the computer and reinstalling QCAD. I kindly ask for help.

Kind regards
Reinhard

2110QCAD (main)Bug ReportLowLong list of warnings.Waiting on User
0%
Task Description

New install of qcad 25.

Warning: RPropertyTypeId::generateId: property already initialized: 7RObject : “” : “Invisible” Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: old and new property values for property “DIMCLRT” have different types: RColor vs. int
Warning: old and new property values for property “DIMCLRT” have different types: int vs. RColor
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: Unable to detect a web browser to launch ‘https://qcad.org/doc/qcad/3.25.0/reference/en/index.html’ Warning: old and new property values for property “DIMCLRT” have different types: RColor vs. int
Warning: old and new property values for property “DIMCLRT” have different types: int vs. RColor
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
/data/installation/qcad 12:02 > /usr/bin/qcad
Warning: RPropertyTypeId::generateId: property already initialized: 7RObject : “” : “Invisible” Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: old and new property values for property “DIMCLRT” have different types: RColor vs. int
Warning: old and new property values for property “DIMCLRT” have different types: int vs. RColor
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: old and new property values for property “DIMCLRT” have different types: RColor vs. int
Warning: old and new property values for property “DIMCLRT” have different types: int vs. RColor
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js
Warning: custom default action class not found: scripts/Pro/DefaultActionPro.js

2099QCAD (main)Bug ReportLowDIM Label, Square Symbol doesn't adopt layer attributesAssigned
0%
Task Description

The square symbol offered as symbol in DIM label is the only symbol which doesn’t adopt the layer color.
If I print a drawing in full color it leads to a black symbol in an otherwise colored dimension.

It is also the only symbol which has a solid filling what is confusing when you work with it in Model_Space ...

2092QCAD (main)Bug ReportLowcrash when changing shortcut in preferencesAssigned
0%
Task Description

The application crashes when I try to change a shortcut in the preferences. And only after resizing the preferences window.
In the attachement are the cli warnings.
I also tried the 3.24.3.9 snapshot with the same result.

2091QCAD (main)Feature RequestLowToggle redrawing of hatches Assigned
0%
1 Task Description

Because modifying hatches have lag issues I’d like to propose a toggle that turns of the redrawing/rendering of the hatch. Especially while modifying the hatch.

The hatches always have a boundary that can be worked with right? So when we move or stretch the hatch we can still see the boundary and its handles to perform all the actions.

This could be a new view mode that turns of the view of the interior/pattern of the hatch but leave the boundary of the hatch.
Or the draft mode can be extended to include simplified hatches while modifying.

Also see the discussion

2087QCAD (main)Feature RequestLowMore options for "Paste along Entity" [PE]Assigned
0%
Task Description

“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.

Would be a nice time saver to have the same options for “Paste along Entity” too.

2072QCAD (main)SuggestionLowInserted and flipped block mirrors text and dimAssigned
0%
Task Description

Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.

Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.

Version 3.23.0 doesn’t shows this behavior.

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206

2070QCAD (main)Feature RequestLowcropping imageAssigned
0%
Task Description

It may be useful to insert the “image cropping” function both in top / bottom - right / left mode, and with polyline

2063QCAD (main)Performance IssueLowBad performance while zooming inside layout block with ...Assigned
0%
1 Task Description

Zooming in and out is lagging to the point of unusable. This is happening in a layout block with the cursor pointing inside geometry with hatches. When the cursor is pointing outside the geometry zooming works as expected.
The attached file has a very simplified testcase that shows this problem almost in the same way as a more complex drawing with multiple layers and hatches.

edit: I also attached the more complex drawing because it is a bit unclear to me where the lagging stops. Outside the viewport or outside the paper.

I just noticed the selection box has the same problem!

2060QCAD (main)Feature RequestLowDialog box for Layer StatusAssigned
0%
Task Description

So far, layer status has only been implemented very rudimentarily.
I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.

2057QCAD (main)Feature RequestLowMultiline toolAssigned
0%
Task Description

Implement a multiline tool.

2056QCAD (main)Feature RequestLowOption Duplicate layer (yy) inclusive all sub-layers.Assigned
0%
Task Description

If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done.
Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.

Current lack:
Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.

With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ... :-(

2041QCAD (main)Bug ReportLowcircletangent2 doesn't solve correctly if the defining ...Assigned
0%
Task Description

In my example I can’t draw a circle with circletangent2 if the defining point is on one of the defining tangents. The tangency is lost when I try to do this.

I attached 4 screenshots: TheExample.png, TryingPoint1.png, TryingPoint2.png and The_Point_Isn’t_On_The_Tangents.png.

2037QCAD (main)Feature RequestLowSupport alternative angle referenceAssigned
0%
Task Description

E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.

2034QCAD (main)Feature RequestLowPaint Properties to include modifying linetype scales w...Assigned
0%
Task Description

Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result.
QCAD Pro 3.24 Windows10.

2018QCAD (main)Feature RequestLowLayer visibility setting per view/view-portAssigned
0%
2 Task Description

In a medium complex drawing it’s often too much details to have all layers in a drawing visible at once. Also, it is of great importance to be able to have a single model to avoid duplication of work and risk inconsistency.

So i would like to create a number of views where each view has selected layers visible (that makes sense for the purpose of the view) and then assign the views to different layout blocks (using view-ports) in paper-space to be able to setup printing of several views on the same page/PDF

This also means that view-ports would have to be aware of what view they are displaying (if any besides the standard-view).
This will then make it possible for printouts of different views with selected layers visible (different for each view and view-port) and still have only one model. Today this is not possible.

As it is today the only limited workaround is to set the layers you want to display, print/PDF of that viewport on separate page, and then change it for the next page, and so on. The big drawback is that you cannot have two different views/view-ports on the same page with different layers visible. Also, for large drawing it is painful to have to do a lot of manual setup for each rendering of the complete drawing.

2016QCAD (main)Bug ReportLowOffsetting multi selection of polylines halts prematureAssigned
0%
Task Description

See:
https://qcad.org/rsforum/viewtopic.php?&t=6827&p=25992#p25992

Offsetting 32 polys from ellipses fails.
Offsetting 16 polys can be completed with 2 selections for outer and 2 for inner.

For some reason the offset function halts premature.

Regards,
CVH

2014QCAD (main)Bug ReportLowFocus on Options Toolbar failsAssigned
0%
Task Description

Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.

Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828

1999QCAD (main)Feature RequestLowViewport: Add additional properties for controlling dim...Assigned
0%
1 Task Description

When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:

1)
E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed.
This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.

2)
Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.

The Viewport properties:
https://i.imgur.com/s07JtaB.png

1983QCAD (main)Feature RequestLowTrim All or Bulk Break outAssigned
0%
1 Task Description

This is a trim method I am missing in Qcad.

20 years ago it existed in CadKey.
You had a bunch of lines or segments.
You defined a (new) line or segment as cutter.
‘Trim All’.
You pointed at the side of the cutter entity to trim all intersecting at that side.

Pritty the same as in this topic:
https://qcad.org/rsforum/viewtopic.php?t=5221

Only in rare cases I can use Husky’s workaround as pro.
It all depends on what else is in the clipping rectangle that is needed to trim all intended.
If of no use all single crossing entities have to be chosen one by one.

Regards,
CVH

1982QCAD (main)Feature RequestLowmeasure DIN 1356Assigned
0%
Task Description

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

1977QCAD (main)Feature RequestLowCorresponding coordinate format Assigned
0%
Task Description

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

1976QCAD (main)Feature RequestLowEnvelope at offset to a poly toolAssigned
0%
Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?t=6650

1972QCAD (main)Bug ReportLowHatch import fails for boundaries with many very small ...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648

1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

1954QCAD/CAMReleaseLowRevised PWM Post ProcessorAssigned
0%
Task Description

Hallo Andrew,

I have revised the PWM Post Processor to Revision D.

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

1934QCAD (main)Feature RequestLowDiametric text - overlaidAssigned
0%
Task Description

Diametric text is always placed above a horizontal measurement.

I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.

To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.

A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.

Similarly for a vertical measurement, the text is overlaid and illegible.

When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).

Kind regards
Simon

1930QCAD (main)Feature RequestLowOption disable "Auto Zoom on load" for saved "Layout Vi...Assigned
0%
Task Description

Hi,

my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.

But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.

Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?

1928QCAD (main)Feature RequestLowOptionnally 'Auto clean up' after generation of NaN / N...Assigned
0%
1 Task Description

Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props.
Some explicitly don’t and test their actions with isNull().

As these serve a purpose in some processes, trails of them can be part of the results.
For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line.
In a few cases its a desirable feature eg. controlpoint spline.
(Allthough there are no Null props involved with equal successively controlpoints)

Many problem post on the forum are related to Null - Zero and so on.

In some cases it can’t be undone by re-editing the drawing.
https://qcad.org/bugtracker/index.php?do=details&task_id=1925

If it can’t be undone by Undo/Redo it is a bug.
https://qcad.org/bugtracker/index.php?do=details&task_id=1757

In some cases there is a difference noticed after file save-close-open.

1926QCAD (main)Feature RequestLowNo negative coordinate values ? (DO command)Assigned
0%
1 Task Description

Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !

Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command.
There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !

GW.G

1917QCAD (main)Feature RequestLowAutomatic labels with static information of the drawingAssigned
0%
Task Description

I would like static information of the drawing (like scale, creation-date, modified-date, revision etc) to be available as automatic labels to be placed in the drawing (with selectable style, font etc)

This would greatly simplify the creatin of title sections in the drawing and making sure it is consistent with the actual drawing and not requiring manual “synchronization”.

1916QCAD (main)Bug ReportLowMoving an object in an angled viewport with mouse does ...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport to 90 degrees
4. Place view-port in paper space
5. Select the view-port in paper-space by clicking it
6. Try to move the object itself in the view-port (by clicking the “top” dot) to the right by moving the mouse to the right while holding the left mouse-button.

Actual

The object in the viewport moves down vertically NOT to the right

Expected

The object moves to the right

(It seems mouse movement does not compensate for the rotated angle of the viewport)

Workaround

None, except compensate for the angle in your head and moving the mouse the “wrong” way when correcting the placement of objects in the view-port

1915QCAD (main)SuggestionLowViewport does not rotate view-port when changed in pape...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport.

Actual

The object in the viewport changes but the viewport itself remains unchanged

Expected

That both the view-port and the object changes angle as the angle is updated

Motivation

If you abort the placement (but keep the angle) and go back to model-space and then redo the operation the view-port is rotated along the angle. It seems that the viewport only picks up the initial angle once the paper-space is open and ignores any changes thereafter

Workaround

1. Select the view-port per normal in model-space
2. Open the paper-space and set the wanted angle but do not place the view-port in paper space
3. Abort the placement on paper-space and redo the whole operation

Once the paper space is opened again the view-port will have the chosen angle

1913QCAD/CAMBug ReportLow3D Simulation Behaves oddAssigned
0%
Task Description

Hallo Andrew,

testing the drill toolpath I used single point markers.

In 3D simulation the tool drills the toolpath AND uses the drill as a mill.

Cam Export and generated G-code is not effected.

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

1903QCAD (main)Feature RequestLowSaving layer settings, e.g. visibility status, associat...Assigned
0%
Task Description

In a medium complex drawing it may be too much details to have all layers in a drawing visible at once.

Instead a number of views would be created that saves not only zoom level and position but also what layers are visible and not (as appropriate for the purpose of that particular view). This is very cumbersome (to the extent it is not really realistic) to achieve today and requires a lot of duplication of both model and layers.

The advantage of adding this is the ability to have only one model (with multiple views) and avoid duplication of work and the risk of inconsistency inherent with many copies of the model.

As a further (and natural extension to this) would be the ability to used this functionality with view-ports to be able to create (possibly many) paper-spaces from a single model. This would however require view-ports to be aware of what view they are a window into. A single change in the model would then propagate to all defined view-ports and paper-spaces.

1902QCAD/CAMFeature RequestLowCAM G-Block ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very handy G-code Block Toolpath. This ‘toolpath’ also solves a lot of “editing requests”.

1901QCAD/CAMFeature RequestLowCAM Traverse ToolpathAssigned
0%
Task Description

Hallo Andrew,

Still busy on the never ending G-code story. Urgently needed the very common Traverse Toolpath.

Example added as pdf.

Greetings

1895QCAD (main)Feature RequestLowAdd support for block transformation matricesAssigned
0%
Task Description

Support transformations by transformation matrix for block references.

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=6333

1890QCAD (main)Feature RequestLowPossibility to address an QCAD extern font folderAssigned
0%
Task Description

Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD. :-)

The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.

1888dwg2bmpFeature RequestLowAdd support to disable hatch rendering on "dwg2bmp"Assigned
0%
1 Task Description

Hi!

A friendly request to add an option to disable hatch rendering on “dwg2bmp” conversions.

Depending on the nature of the conversion and the density of the hatch, this may render unintelligible images (see attachments). The option could look like “-t, -nohatch” to indicate hatches should be hidden before rendering. This could potentially become an option too for “dwg2svg” or “dwg2pdf.”

Amazing product, thank you so much!

1887dwg2bmpFeature RequestLowAdd "-max-lineweight" option for dwg2bmpAssigned
0%
2 Task Description

Hi there,

A friendly request to add the option to set a maximum lineweight for raster conversions via dwg2bmp.

Depending on the LW configuration of the CAD file, rasterization operations sometimes yield terrible results (see attachment). This would also mirror the similar “-min-lineweight” options available on “dwg2svg” and “dwg2pdf” (although not on “dwg2bmp”).

See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=6298

Thanks!

1886QCAD (main)Feature RequestLowSupport advanced tolerance settings for dimensionsAssigned
0%
2 Task Description

Add support for
- tolerance display (dimtol)
- upper limit (dimtp)
- lower limit (dimtm)
- tolerance precision (dimtdec)
- tolerance text size factor (dimtfac)
- tolerance suppress zeros, etc.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269

1878QCAD (main)Feature RequestLowSnap > Distances from 2 Points: snap to point with give...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211

1877QCAD/CAMFeature RequestLowPost Processor TutorialAssigned
0%
Task Description

Hallo Andrew,

I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.

Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?

1870QCAD (main)Feature RequestLow Stretch tool / option to turn selection restriction on...Assigned
0%
Task Description

Hi,

since 3.19.2 the Stretch tool looks for any selection and follows the specification “Only stretch selected entities if there is a selection”.

That is a nice feature but it leads many times to confusing because I have to deselect a selection just because I need to use the stretch tool on something else on the fly. The same if I “forgot” a selection outside of my zoom which is still important for me. The stretch tool just won’t work without any message why not. My routine now is that I terminate every selection just before I use the stretch tool just not to be surprised by “why isn’t it working”?

It would be nice to have in the Stretch option bar a checkbox to turn the “only selection feature” on or off. QCAD should remember that setting.

1863ECMAScriptFeature RequestLowWidgetFactory.saveState: save state of checkable QGroup...Assigned
0%
Task Description

QGroupBox widgets with <property name=”checkable”> are not saved in Qcad3.conf

Showing tasks 1 - 50 of 396 Page 1 of 81 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing