QCAD Bugtracker

Es wäre Arbeitserleichternd wenn ich bei den Optionen für Bemaßungen (Prefix/Postfix) eigene Präferenzen speichern könnte so das diese in allen Zeichnungen von mir verfügbar wären.
Zudem wäre es wünschenswert dieses nicht nur bei den Prefix sondern auch bei den Postfix Angaben nutzen zu können was dann alle(?) Manipulationen erschlagen würde.

Siehe auch:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1966

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel

Es wäre schön wenn ich Werte wie zum Beispiel Längen von Linien direkt abgreifen könnte um diese weiter in Berechnungen verwenden zu können.

Beispiel:
Ich habe eine Linie konstruiert wobei sich eine Länge y ergeben hat.

Nun möchte ich eine Linie zeichnen die 5 mal y sein soll.

Linientool → Wert 5* eingeben und y durch Auswahl mit der Maus von dem vorhandenen Elements übernehmen.

Natürlich könnte ich die Geometrie Info benutzen um den Wert abzulesen oder auch über die Zwischenablage zu benutzen. Ein abgreifen mit der Maus wäre aber schneller, direkter und wahrscheinlich auch mit weniger Fehlern (Human error) verbunden. Wahrscheinlich auch genauer da QCad, denke ich, mit mehr Nachkommastellen rechnet, oder?

Feature request
See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015

Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.

I would appreciate an option for the library Browser that gives me the possibility to decide by my self to use the current (same name) layer in my drawing or overwrite it with the existing layers in the library item.

Imagine the possibility’s of this feature ....

Support disproportional scaling also for arcs, ellipses, other entities, not only lines and polylines with only line segments.

Provide keyboard shortcuts for options tool bar.

Under Linux, Windows Alt+Key shortcuts can be used.
Mac OS X does not seem to support this.

See also suggestions at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2053&view=unread#unread

Wenn ich eine Zeichnung plane überlege ich mir natürlich im Vorfeld welche Blattgröße und welchen Maßstab ich verwenden möchte.

Wenn ich Templates (z.B. Zeichnungsblatt A4) für die Blattgröße öffnen könnte und dabei direkt einen Skalierungsfaktor (z.B. 10) vorgeben könnte hätte ich ohne Umwege gleich alles was man braucht. In diesem Fall ein A4 Blatt im Maßstab 1:10.

Im Grunde genommen das selbe was ich bereits mit Library Items machen kann ...

1. The Scrollbars for each window in the Viewports has the same size like the normal used scrollbars for windows. If you are working on a normal size Monitor it “steals” a lot of “working space”. Is there any possibility to make the scrollbars smaller or just a line to separate the windows so that I have to navigate with Keyboard and mouse?

2. I thing the Viewports and the View List belongs together - is it possible to get a button in the “View List / Tool Bar” to choose a Viewport style instead of “walking” the long way over the “Drawing preferences” Menu?

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=2071

It would be useful if a file of keyboard shortcuts to commands could be loaded.

Then a set of shortcuts identical/based on the Autocad keyboard shortcuts can be loaded, making it much easier for Autocad users to migrate to your product.

There does seem to be some future functionality planned here, with the shortcut ‘scheme’ selector in Program Preferences, but for the moment ‘Qcad’ is the only option available.

This strategy is used to great effect by Draftsight (but who trusts a big company like Dassault/Solidworks...)

Command ‘Lengthen LE’ will extend most arcs but not all (2 arcs in the attached drawing do not work)! There is no obvious reason for this from the users point of view.

Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....

I like it ... but maybe I’m the only one

A line with linestyle = dots and line weight = 0.00 appears in model space overly spaced, all other lineweights behave as expected.
Suspect other linestyles to behave in a similar fashion.

See attached drawing.

Suggested fix: use the same scaling for lineweight 0.00 as for lineweight 0.05.

On behalf of et76
Possible printing error using Linux 16 - needs further testing!
Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

Au nom de et76
Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests!
S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript).
This may also apply to superscripts.

It might be useful for some to have the option to turn on/off ' auto’ dimension tracking option.

See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=2&p=6893#p6893

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180

Add more dimension arrow styles (e.g. dots).

See forum thread:
http://qcad.org/rsforum/viewtopic.php?f=31&t=2185

Hatched block loses hatching when using isometric projection tool:
See -http://www.qcad.org/rsforum/viewtopic.php?f=32&p=7063#p7063

When manipulating a saved hatched block with the isometric tool it loses the hatching unless the block is exploded.

Is this normal behaviour here? or a bug?

Task: If I like to make a hatch and the contour isn’t closed I get a Grey circle Info where the contour isn’t closed. Nice!

But ..... I have this Info only for ONE not proper connection and only for the moment when the mouse pointer is over the Hatch Tool Symbol.

If I have to zoom into the Problem - I will lose the Info where the problem is

To get the “Problem Info” back I have to select it again - but for that I have to zoom out ...............

It would be nice to have this “Problem Info” longer in the drawing - maybe until I solved all problems.

And it would be nice to have ALL Infos for not connected lines at the same time. It is not really helpful to repeat this function 20times if I have 20 connection problems ... ;)

Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....

Hier meine Gedanken ....

In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.

Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.

Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.

Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!

OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”:
QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!

Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.

Win 7 - 64
Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.

It would be nice to get:

In the Create Library Item task → “Save as” a remember Function for the last chosen Path to save the Item ... or a default path what is the same like the settings in the Application Preferences.
Right now you have to navigate again and again for every item what you will save in the same directory. If you have to save 20 items - it sacks

Also would it be nice for an easy “Clean up” to have the possibility to delete items directly in the Library Browser window.
Right now you have to use extern Programs like the Windows explorer to move or delete items.

Vertical dimensions created with 3rd party applications are sometimes imported as horizontal dimensions with length 0. Changing the angle in the property editor fixes the problem.
Problem occurs in QCAD 2.2 and QCAD 3.0.

Hi,
this is a usability feature request:

If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.

It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).

Thx

Preferences not stored on some installations

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&view=unread#unread

Some users are experiencing problems with dwg2bmp.

See forum at:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2272&view=unread#unread

See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread

When creating a new file, selecting the e. g. line tool at first opens the linemenu and the snap tool menu as expected. After clicking on the back button twice (going back to the main menu) and selecting the e. g. circle menu, the snap tool menu is shown instead of the circle menu. Instead the circle menu is shown after pressing the back button again.

This only happens when clicking on the back button, but with any tool menu seleected. Pressing escape to go back does not show this problem.

QCAD is running on Mac OS Mountain Lion.

Add support for custom dimension labels created in 3rd party applications. Such labels may contain text that is stripped by QCAD.

Windows 7-64
3.0.7
When adding or removing additional viewports,an extra unnecessary window of the viewport is created.

Leader Arrow size and the Architectural tick size are controlled by one and the same value.

It would be nice to get the possibility to adjust them independently from each other ...

Most of our drawings have a Data sheet, parts List, cutting list, description etc etc on a pdf, world or excel file.

It would be nice to have a link possibility directly in QCAD to those files what will be saved with the drawing.
Like the bitmap function without displaying the files in the drawing ...

- Switch isometric grid off
- Switch isometric grid on using drawing preferences
- Tool buttons don’t reflect correct status

Not really a bug I suppose but the save as.dgn file format is missing in snapshot 3.0.8 release.

Will this be available again soon?

Would it be possible to make a Plug in tool for a Hatch generator, so custom made hatches can be saved as .pat files?

I have a lot of up and coming future projects that I would like to make my own ‘custom’ hatches for.

It would be nice to have the option for a “Short” Extension Line.
This is often used in Architectural drawings.
Yes, I know that I can explode a dimension and change it to that what I’m asking for - but that is really a Sisyphus task and destructs the function of a dynamic Dimension in QCAD.

To add a new ‘Match’ properties tool.

For example, I have a large drawing with lots and lots of entities on various layers and I want to select some entities (say 500 or more) which are all on different layers and change all these selected entities to match the properties of one other particular entity - but, but I want the ‘Matched’ entities to remain on their own layers.

OK, of course I can use the property editor for this and this is fine in most instances but I would first need to determine the the layer data for the properties of the entity I would like to match to (Color, Line weight and Line type) in the first place and then I need to remember these attributes in order to change things in the property editor in order to change all of my selection to match!

As I say mostly the above procedure would be fine to use but for convenience it would be great to have a new tool to do all this for me and cut out a few steps in the process.

A new ‘Match’ properties tool procedure could be something like this:

1. Select Match properties tool.

2. Select all entities to be matched.

3. Select entity to match to.

4. Tick or leave un-ticked - move to same layer.

5. Complete process.

* Actually, while writing this I`ve just thought of another useful addition which could be added to the Info tool set, ‘Entity’ properties info!
Example - click on Info > Entity Properties and click on the entity in question and then the properties are displayed without going to the layer data for this!
Just an idea ;)

Windows
3.0.8
Application preferences > Graphics View > Appearance - Solid grid lines doesn’t change anything?

It would be a nice feature to be able to define your own toolbar.

See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2393

This is how I would implement this:

This would be a modification tool. Parts are selected, a toolpath is generated, and a dialog pops up to allow putting the tool path into an existing layer, a new layer, or replace all drawings in an existing layer.

This is how the toolpath is generated:

We iterate through all elements and explode everything but text into line segments. Then we connect the line segments into chains wherever the line endpoints are less than some tolerance away from each other. The chains can be very chaotic, but at least we have separate entities for now.

For every chain, we need to find the largest complete loop. A good drawing would only contain non-overlapping loops, but we can’t expect that. Everything that is not on this loop can not be defined as a part or as a hole, so we will merely create a tool path segment that is equivalent to the line segment. Every segment that *IS* on a loop is either an outside edge (part outline), or an inside edge (hole outline), (or overlapping, in which case it is neither, and we have an operator problem).

In a perfect world, we need to find exactly which shape is inside which other shape, and then create alternating tool offsets from the outmost loop (part edge) to the second outmost (hole), to the next (part) etc. .

In a simplified world, we can used the bounding box of the loop instead. This works OK for rectangular shapes, but a circle next to an “L” shape could be seen as inside the L’s bounding box, hence inside the L, wrongly accused of being a hole, not a part.

Now all that is left to do is to create a new loop, offset by the tool radius. Oh, and since we have the connections from line segment to line segment in the correct order already, we can use the opportunity to order all cutting loops from inner to outer, or from small to large, and order non-loop edges by travel distance.

The new drawing in the new layer can now be exported without further hassle to create a nice laser cut file.

PS: of course, a user could create multiple layers for marking, cutting, enraging, etc. . Additional Layer attributes for cutting speed and laser power (and a few more) would be needed.

It would be nice to have an additional Coordinate tool for isometric constructions.

If I’m working on an isometric drawing I have to design my things with x, y, z coordinates.
Y is, of course not a problem but for x and z I have most off the time to work with construction lines for move, copy, locate etc.
With an isometric coordinate snap tool what will follow the 30° angles for x and z we could save a lot of construction lines

Feature request - to have an option to underline text.

In order to be more easily editable after creation Freehand Line should produce a Polyline and should be moved away from Line Tools to Polyline Tools

If there is no selection the Properties Editor could be used to predefine the properties of to be drawn elements.

The Info Tool Polygonal Area is a helpful tool ... but I like to ask for additional options

Yes, the polygonal area makes absolute sense but many times you have just to check a square or rectangle area!

It would be nice and time (click) saving if we could use a “Strg Key” to limit the polygonal area to just a rectangle area.
Two mouse clicks for a rectangle area and done

In addition to that it would be nice to have the possibility to count up or down a couple areas.
E.g. I measure area 1 plus area 2 or area 1 minus area 2 ...
Maybe just with an additional keystroke like + or -

When drawing or moving objects holding down CTRL should activate ortho snapping as long as CTRL is pressed.

If ortho mode has been active before holding down CTRL should deactivate it (for the time it is beeing pressed).

The Number of Copies (Delete Original, Keep Original, Multiple Copies) and whether to use the current layers attributes should be found in the Options toolbar of the active tool.

This way the option would be set before or during the operation (preview?)the popup window afterwards would be obsolete.

Merge Parallel Line(with distance), Concentric Arc(with distance), Concentric Circle(with distance) and Offset(Polyline) into one generic Offset with distance tool that if possible also works for ellipses and splines.

Do the same for the “through point” tools so that there also is just one Offset through point tool.

The Offset tools could be located with the Modification tools.

It would be useful to have a persistent selection button added to the ‘selection’ tool set.

This would allow the user to set persistent selection as and when needed for the current drawing one is working on, rather than going the long route through the ‘Application’ preferences dialog.