QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
1287QCAD (main)Feature RequestLowInformation tool shows absolute units in print previewAssigned
0%
1 Task Description

With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units.
So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.

See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

1288QCAD (main)Feature RequestLowPrint Preview Scaled RulersAssigned
0%
1 Task Description

Would be nice, if in print preview QCAD rulers would switch to paper dimensions. Chat here http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

After all, print preview is not just the drawing on white, isn’t it? Everything else should stay in drawing units. Just the rulers, maybe a preference?

1312QCAD (main)Feature RequestLowMake dimension label decimal separator configurableAssigned
0%
1 Task Description

Make dimension label decimal separator configurable (DIMDSEP).

1337QCAD (main)Feature RequestLowAlternate units for dimensionsAssigned
0%
1 Task Description

Add support for alternate units for dimension style, for example to display units in mm and in.

1372QCAD (main)Feature RequestLowDistance Point to Point - option for 'added' distancesAssigned
0%
1 Task Description

It would be useful to have an additional option to be able to count/add up consecutive distances measured with this tool ;)

1373QCAD (main)Feature RequestLowLine From Angle - additional option to select exisitng ...Assigned
0%
1 Task Description

Often I find myself clicking on an existing line to determine the angle from the property editor, then copying and pasting this info into the angle field, it would be so very useful to have an additional option in the ‘Line from Angle’ tool to be able to pick an existing entity which would automatically register and fill in the angle for me,then all I would need to do would enter the length required.

1449QCAD (main)Feature RequestLowProperty Editor: show centroid of polylinesAssigned
0%
1 Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320

1452QCAD (main)Feature RequestLowColour opacity optionAssigned
0%
1 Task Description

Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?

related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715

1471QCAD (main)Feature RequestLowFile > Open file locationAssigned
0%
1 Task Description

When working with several files is normal also to work in several folders, this can be confusing, expecially in the case where there are different folders with equal file names.
I propose the creation of a “Open file location”. This, probably under the main menu, “File”, when clicked would open the standard
“file explorer” with the folder that contains the current file already selected.
It would be quite similar to the windows 8/10 “Open file location”.

1489QCAD (main)Feature RequestLowEdit > Drawing Preferences > Dimensions: Add option to ...Assigned
0%
1 Task Description

It would be extreamly useful to have an option to either use - or not use leader lines in the standard horizontal/vertical dimension line tools, some of the drawings I’m working on need the ‘standard’ looking dimensions with leader lines and some don’t. its a real pain to have to select - explode and delete all the leaders I don’t need.

Hoping for an option

Regards

Clive

1502QCAD (main)Feature RequestLowInfo tool / Setting for Font and Size ... Assigned
0%
1 Task Description

It would be nice if the Info Tool / Add Measurement to drawing option would use the same settings like the “Dimension settings” for Font and Text height. It’s a kind of similar function in a drawing and should have the same style. Maybe with an on/off switch?

1541QCAD (main)Feature RequestLowView > Zoom > Zoom In/Out: Make zoom factor configurabl...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

1555QCAD (main)Feature RequestLowExport list of points.Assigned
0%
1 Task Description

Hello
It would be great when you can add a function to export a selected object as a list of points.
Is it possible to add?

Autodes DWG TrueView 2017 has this function and it is very useful.
Here you can see a screenshot of this function.

1577QCAD (main)Feature RequestLowPostfix for DIM / Remember last DIM Label ...Assigned
0%
1 Task Description

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

1613QCAD (main)Feature RequestLowAdd Orthogonal Option to Angelur DIM Tool ...Assigned
0%
1 Task Description

... please see below:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1673QCAD (main)Feature RequestLowLayouts and Viewports: support polygonal viewportsAssigned
0%
1 Task Description

Add support for polygonal viewports

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1702QCAD (main)Feature RequestLowDraw > Polyline: add boolean operationsAssigned
0%
1 Task Description

Add intersection, union, difference, XOR operations for closed polylines.

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

1713QCAD (main)Feature RequestLowAdd attribute value "By Parent" for child layersAssigned
0%
1 Task Description

Add attribute value “By Parent” for color, line weight, line style for child layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407

1714QCAD (main)Feature RequestLowDimension > Diametric: improve display when label is mo...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408

1722QCAD (main)Feature RequestLowOption to insert viewport at either of the rectangle co...Assigned
0%
1 Task Description

Hi Andrew,

Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.

Hope that makes sense.

Many thanks

Clive

1731QCAD (main)Feature RequestLowOption to place text to other sideAssigned
0%
1 Task Description

Hi Andrew,

It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(

Many thanks

C;live

1755QCAD (main)Feature RequestLowSelecting standard rotation angles by mouse click for M...Assigned
0%
1 Task Description

This would be nice.
It will save a lot mouse - keypad changes for me.

1810QCAD (main)Feature RequestLowChange icons from black on white to white on black depe...Assigned
0%
1 Task Description

Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window.
See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970

1811QCAD (main)Feature RequestLowZoom 1:1Assigned
0%
1 Task Description

It would be nice to be able to adjust the zoom factor so that the scale on the screen matches a ruler which I lay on the screen.

Thanks!

1833QCAD (main)Feature RequestLowDeep synchronize attributes featureAssigned
0%
1 Task Description

There is the Synchronize attributes feature which works well. But It affects only block references in the active layout(modelspace, block layout). If I want to synchronize attributes of block references in in another blocks, i have to manually go through all blocks and run synchronize attributes feature. That is the reason I would like to modify Synchronize attributes feature to affect all block references in a drawing, or add new Deep synchronize attributes feature.

1837QCAD (main)Feature RequestLowLine bisector toolAssigned
0%
1 Task Description

Hi,

we have already this nice tool “Angle bisector”.

I would really appreciate if we could get the same function for parallel lines to place a line exactly in the center of both lines.

Thanks.

1888dwg2bmpFeature RequestLowAdd support to disable hatch rendering on "dwg2bmp"Assigned
0%
1 Task Description

Hi!

A friendly request to add an option to disable hatch rendering on “dwg2bmp” conversions.

Depending on the nature of the conversion and the density of the hatch, this may render unintelligible images (see attachments). The option could look like “-t, -nohatch” to indicate hatches should be hidden before rendering. This could potentially become an option too for “dwg2svg” or “dwg2pdf.”

Amazing product, thank you so much!

1903QCAD (main)Feature RequestLowSaving layer settings, e.g. visibility status, associat...Assigned
0%
1 Task Description

In a medium complex drawing it may be too much details to have all layers in a drawing visible at once.

Instead a number of views would be created that saves not only zoom level and position but also what layers are visible and not (as appropriate for the purpose of that particular view). This is very cumbersome (to the extent it is not really realistic) to achieve today and requires a lot of duplication of both model and layers.

The advantage of adding this is the ability to have only one model (with multiple views) and avoid duplication of work and the risk of inconsistency inherent with many copies of the model.

As a further (and natural extension to this) would be the ability to used this functionality with view-ports to be able to create (possibly many) paper-spaces from a single model. This would however require view-ports to be aware of what view they are a window into. A single change in the model would then propagate to all defined view-ports and paper-spaces.

1926QCAD (main)Feature RequestLowNo negative coordinate values ? (DO command)Assigned
0%
1 Task Description

Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !

Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command.
There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !

GW.G

1928QCAD (main)Feature RequestLowOptionnally 'Auto clean up' after generation of NaN / N...Assigned
0%
1 Task Description

Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props.
Some explicitly don’t and test their actions with isNull().

As these serve a purpose in some processes, trails of them can be part of the results.
For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line.
In a few cases its a desirable feature eg. controlpoint spline.
(Allthough there are no Null props involved with equal successively controlpoints)

Many problem post on the forum are related to Null - Zero and so on.

In some cases it can’t be undone by re-editing the drawing.
https://qcad.org/bugtracker/index.php?do=details&task_id=1925

If it can’t be undone by Undo/Redo it is a bug.
https://qcad.org/bugtracker/index.php?do=details&task_id=1757

In some cases there is a difference noticed after file save-close-open.

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

1976QCAD (main)Feature RequestLowEnvelope at offset to a poly toolAssigned
0%
1 Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?t=6650

2060QCAD (main)Feature RequestLowDialog box for Layer StatusAssigned
0%
1 Task Description

So far, layer status has only been implemented very rudimentarily.
I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.

2087QCAD (main)Feature RequestLowMore options for "Paste along Entity" [PE]Assigned
0%
1 Task Description

“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.

Would be a nice time saver to have the same options for “Paste along Entity” too.

2107QCAD (main)Feature RequestVery LowAdd a button to the tool bar to allow for a quick backg...Assigned
0%
1 Task Description

I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.

2161QCAD (main)Feature RequestLowMake Polyline from Selection (OC) configurable for simp...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Not related to OS, nor version.

The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar.
The method Polyline from Selection (OG) has no UI or none showing.

OG retrieves a tolerance from QCAD.ini, what is initially not set:

    var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);

The tolerance will be default = 0.001 similar as the default in AppPrefs.
The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.

OG calls PolylineFromSelection.autoJoinSegments with this tolerance:

    var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);

PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape
with simplification hard coded to true. (last parameter)

    // create polyline from line, arc, spline or open polyline entity:
    var polyline = PolylineFromSegments.createPolylineShape(
                    entity, doc, vTolerance, op, undefined,
                    traversed, callBacks, undefined, true);

I would like to see the simplification optional and default = true.

Regards,
CVH

2164QCAD/CAMFeature RequestLowAdd ability to pan the 3D view with a modifier key and ...Assigned
0%
1 Task Description

With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.

2195QCAD (main)Feature RequestLowSaved views include memory of blockAssigned
0%
1 Task Description

When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.

2213QCAD/CAMFeature RequestLowAllow editing Spindle Speed separately for each Toolpat...Assigned
0%
1 Task Description

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

2282QCAD (main)Feature RequestLowAdd a "Save As" command while editing blocks in placeAssigned
0%
1 Task Description

As a heavy mechanical drawings user, it would help a lot to have an option to exit a block saving as a new name and making it a new entity from that time ahead.

Example: if a have a lot of screws, one of then is behind another peace and need the to have some lines changed to hidden style lines, in the flow of the work is great if I edit that screw in place and when exiting have the option to save as a new block, to don’t mess with other entities of the same block that I don’t want to change. Yes, there is a workaround that is duplicate and rename the block prior to the editing, but a save as seems to work easier.

Thanks Andrew and team!

2293QCAD (main)Feature RequestLowinsert attributes into a point elementAssigned
0%
1 Task Description

Would it be possible to extend the tool for importing points with a label so that when importing points into the drawing (as it is now), the attributes of the point are taken from the csv file and written to the point’s own properties? See attachment. This would extend the functionality of the tool and I assume that it would also lay the foundation for the possible re-export of such points from the drawing to a csv file, including all the details.

2299QCAD (main)Feature RequestLowAdd support for multi line attributesAssigned
0%
1 Task Description

Multiline attributes can contain linefeeds and formatting like MTEXT.

2301QCAD (main)Feature RequestLowRotate preview on/offAssigned
0%
1 Task Description

Hi,

I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.

It would be nice to have an option to turn this preview on/off.

2307QCAD/CAMFeature RequestLowTools to create dogbones or corner overcut Assigned
0%
1 Task Description

The inside corners of profile tool paths have rounded inside corners. This occurs because the rounded outside the bit cannot make it all the way into the corner of the feature. Think of tracing the inside wall of a cardboard box with a can of soup. The can makes direct contact with the box walls, but its
round shape is unable to completely fit into the tight corners— there’s always a gap.

In a dog-bone overcut (see the figure in attachment), the inside profile corner is enlarged into a semicircle, allowing the sharp edges of the mating piece to slide through without interference.

When a dog bone is applied to the inside corners, as shown in the second figure in the attachment, the joints fit together nicely!

The following website explains what should be implemented More elegant CNC dogbones

There are two ways to implement this tool. Either you modify the original design (as implemented in Fusion 360) or you can do it at the moment you define the tool path (Estlcam allows you to do this for example). See the feature Corner overcut, on Estlcam website

275QCAD (main)Feature RequestLowRounding all corners of a polylineAssigned
0%
2 Task Description

Modify - Round - Click polyline - round all corners

467QCAD (main)Feature RequestLowFeature request for new Arc tool option to add to Arc s...Assigned
0%
2 Task Description

For and behalf of mandrena

To add another Arc tool option in Arc tools set:

1.Specify Start point for Arc.
2.Specify End point for Arc.
3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!

516QCAD (main)Feature RequestLowTo add option to 'print only' selected area.Assigned
0%
2 Task Description

To add the option to ‘print only’ selected area in a drawing.

579QCAD (main)Feature RequestLowCopy layers / blocksAssigned
0%
2 Task Description

Duplicate (copy, clone) a layer with or without entities on it. New name can be specified by user.

Showing tasks 301 - 350 of 452 Page 7 of 10<<First - 5 - 6 - 7 - 8 - 9 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing