|
2056 | QCAD (main) | Feature Request | Low | Option Duplicate layer (yy) inclusive all sub-layers. | Assigned | |
|
Task Description
If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done. Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.
Current lack: Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.
With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ...
|
|
1930 | QCAD (main) | Feature Request | Low | Option disable "Auto Zoom on load" for saved "Layout Vi... | Assigned | |
|
Task Description
Hi,
my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.
But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.
Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?
|
|
631 | QCAD (main) | Feature Request | Low | Option "Scale" für das öffnen von Templates ... | Assigned | |
|
Task Description
Wenn ich eine Zeichnung plane überlege ich mir natürlich im Vorfeld welche Blattgröße und welchen Maßstab ich verwenden möchte.
Wenn ich Templates (z.B. Zeichnungsblatt A4) für die Blattgröße öffnen könnte und dabei direkt einen Skalierungsfaktor (z.B. 10) vorgeben könnte hätte ich ohne Umwege gleich alles was man braucht. In diesem Fall ein A4 Blatt im Maßstab 1:10.
Im Grunde genommen das selbe was ich bereits mit Library Items machen kann ...
|
|
2387 | QCAD (main) | Feature Request | Low | Open Drawings on Layout Block by Default | Assigned | |
|
Task Description
As the layout block contains the drawing sheet, the number, the viewports, it’s the presentable part of the drawing.
Maybe QCAD could be able to save on the dxf the “last state” of the drawing. If I saved on the Model and closed, it would open on Model... and if my last save was on the Layout”n”, it would open on Layout “n”.
At least on my work area, when opening a finished drawing, it’s the ideal for it to be opened in a Layout (if it was the active block while saving).
|
|
2558 | QCAD/CAM | Bug Report | Low | Offset trajectory path issue with circular Lead In/Out | Waiting on User | |
|
Task Description
Andrew,
Please refer to related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10724#p44206
An eighth circle with radius 8 Lead In/Out relates to nothing in the actual exported cutter trajectory. Nor does it with the edge being cut.
Proper examples and a comparison with ‘Extension’ type Lead In/Out included. Conclusion: IMHO connecting the cutter trajectory and edge being cut is wrong.
It looks a lot like turning on Cutter Compensation (G41/42) while the motion is circular. But that is uncommon because most controllers can not cope with this motion. One can increase the offset gradually along a straight pre-entry segment for turning on G41/42 but not along a circular path. Also see snippet: - Pre-entry C→B turning on G41 - Circular Lead In B→A
Regards, CVH
|
|
1130 | QCAD (main) | Feature Request | Low | Offset Polyline from both sides at once | Assigned | |
|
Task Description
It would be great to have a tick box to be able to offset a polyline from both sides/edges at once.
Maybe a similar feature could be added to the line -parallel tools?
|
|
1836 | QCAD (main) | Feature Request | Low | Offset for paste along entity | Assigned | |
|
Task Description
add a new parameter “offset” in the dialog “Paste along entity”
see https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22307#p22307
|
|
2068 | QCAD Community Edition | Bug Report | Very Low | Non-english text in upper/lower index becomes UTF code | Assigned | |
|
Task Description
How to reproduce.
1. Create a text field with some non-english words in the upper index. (see attached pic1.png) 2. Save the project and close QCAD. 3. Run QCAD and open same project. 4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)
Tried different fonts - doesn’t help.
Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux CentOS Linux release 7.7.1908 (Core)
|
|
641 | QCAD (main) | Bug Report | Low | No warning is displayed when lengthen tool is used with... | Assigned | |
|
Task Description
Command ‘Lengthen LE’ will extend most arcs but not all (2 arcs in the attached drawing do not work)! There is no obvious reason for this from the users point of view.
|
|
964 | QCAD (main) | Feature Request | Low | New tool request - 'Break Out Arc' from Circle | Assigned | |
|
Task Description
It would be useful to be able to pick a Start and End point of an Arc within a Circle to then break this out. So in principle another break out tool.
Please see topic:http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8826#p8826
|
|
2535 | QCAD (main) | Feature Request | Low | New tool idea: Scale polyline objects separately, each ... | Assigned | |
|
Task Description
In my current QCAD file I’m working on, I have a circular hub with a hole in it which I am also trying to place an alternating sequence of rectangular spokes of a certain relative size around.
I had 4 spokes that I had copied and rotated 45 degrees to create 8 spokes in total around the circle. I tried scaling the the non-cardinal spokes relative to the center of the circular ring, but that causes them to also move towards the center of the ring as they shrink, thereby putting them out of place as they scale.
I therefore had to activate the scale tool once per each object and set an origin (focus) point around the area where each spoke is “attached” to the ring in order to stop each from shifting inward to the circle as it scales.
It occurred to me though that there could be a simple tool or option to do this without that.
Each of my rectangles are polyline objects and thus are coherent continuous objects.
A new scaling tool could be designed such that it is based on simply clicking on each scaling origin on each object (using snapping tools if needed) and then clicking a check button (or enter) when done and then causing the scaling GUI to appear so the user can specify the desired scaling. Each scaling would then be applied to where the polylines were clicked instead of to all the objects as one.
This would be a much faster way to rescale a bunch of objects around individually varying relative scaling origins!
|
|
1363 | QCAD (main) | Feature Request | Low | New Tool - make lines horizontal or vertical | Assigned | |
|
Task Description
New Tool Request:
To have a tool to make any given line which is ‘not’ orthogonal already into an orthogonal line.
For example if I had a line at 30 degrees by using the tool I could change the line to be either horizontal or vertical.
|
|
1788 | QCAD (main) | Feature Request | Very Low | New snap: reference points of a block references | Assigned | |
|
Task Description
I know this was reported and fixed before ...
https://www.qcad.org/bugtracker/index.php?do=details&task_id=843
... but it looks like we have the issue now back with some kind of variation.
If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.
If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.
Edit: New Test drawing:
|
|
813 | QCAD (main) | Feature Request | Low | New Snap tool: Isometric coordinates ... | Assigned | |
|
Task Description
It would be nice to have an additional Coordinate tool for isometric constructions.
If I’m working on an isometric drawing I have to design my things with x, y, z coordinates. Y is, of course not a problem but for x and z I have most off the time to work with construction lines for move, copy, locate etc. With an isometric coordinate snap tool what will follow the 30° angles for x and z we could save a lot of construction lines
|
|
1505 | QCAD (main) | Feature Request | Low | New feature - use info tools with scale | Assigned | |
|
Task Description
When using the info tools, like the point to point measure it would be useful to be able to select a scale as well.
For example, when I scale a drawing say to 1:20, when working on the scaled drawing I can measure accurately with the measure tool in 1:20 also, without having to keep refering to the 1:1 drawing.
Regards
Clive
|
|
1621 | QCAD (main) | Feature Request | Low | New Drawings in Draft Mode | Assigned | |
|
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5001
|
|
792 | QCAD (main) | Feature Request | Low | New 'Match' properties tool | Assigned | |
|
Task Description
To add a new ‘Match’ properties tool.
For example, I have a large drawing with lots and lots of entities on various layers and I want to select some entities (say 500 or more) which are all on different layers and change all these selected entities to match the properties of one other particular entity - but, but I want the ‘Matched’ entities to remain on their own layers.
OK, of course I can use the property editor for this and this is fine in most instances but I would first need to determine the the layer data for the properties of the entity I would like to match to (Color, Line weight and Line type) in the first place and then I need to remember these attributes in order to change things in the property editor in order to change all of my selection to match!
As I say mostly the above procedure would be fine to use but for convenience it would be great to have a new tool to do all this for me and cut out a few steps in the process.
A new ‘Match’ properties tool procedure could be something like this:
1. Select Match properties tool.
2. Select all entities to be matched.
3. Select entity to match to.
4. Tick or leave un-ticked - move to same layer.
5. Complete process.
* Actually, while writing this I`ve just thought of another useful addition which could be added to the Info tool set, ‘Entity’ properties info! Example - click on Info > Entity Properties and click on the entity in question and then the properties are displayed without going to the layer data for this! Just an idea ;)
|
|
293 | QCAD (main) | Feature Request | Low | multi-select for blocks | Assigned | |
|
Task Description
It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.
|
|
1916 | QCAD (main) | Bug Report | Low | Moving an object in an angled viewport with mouse does ... | Assigned | |
|
Task Description
To reproduce
1. Select a new view-port in model-space 2. Select the appropriate paper-space 3. When the paper space opens change the angle of the viewport to 90 degrees 4. Place view-port in paper space 5. Select the view-port in paper-space by clicking it 6. Try to move the object itself in the view-port (by clicking the “top” dot) to the right by moving the mouse to the right while holding the left mouse-button.
Actual
The object in the viewport moves down vertically NOT to the right
Expected
The object moves to the right
(It seems mouse movement does not compensate for the rotated angle of the viewport)
Workaround
None, except compensate for the angle in your head and moving the mouse the “wrong” way when correcting the placement of objects in the view-port
|
|
2115 | QCAD (main) | Suggestion | Low | Move toolbars with negative positions to 0 positions | Assigned | |
|
Task Description
As it can be seen in the attached image, QCAD toolbars may dock to a position slightly outside the visible area of the screen. After having docked there, I have not been able to move them any more. Their current position is just in the middle of the screen.
The position of the toolbars remains the same after the deinstallation of QCAD, shutting down, restarting the computer and reinstalling QCAD. I kindly ask for help.
Kind regards Reinhard
|
|
833 | QCAD (main) | Feature Request | Low | Move number of copies into Options toolbar | Assigned | |
|
Task Description
The Number of Copies (Delete Original, Keep Original, Multiple Copies) and whether to use the current layers attributes should be found in the Options toolbar of the active tool.
This way the option would be set before or during the operation (preview?)the popup window afterwards would be obsolete.
|
|
822 | QCAD (main) | Feature Request | Low | move Freehand Line to Polyline Tools | Assigned | |
|
Task Description
In order to be more easily editable after creation Freehand Line should produce a Polyline and should be moved away from Line Tools to Polyline Tools
|
|
2048 | QCAD (main) | Bug Report | Very Low | Move / Copy to current layer fails when reference point... | Assigned | |
|
Task Description
QCAD 3.24.2 / macOS x86_64 10.14.6
Starting with empty doc: 1. Draw any object (e.g. a rectangle) on layer 0. 2. Create new layer (”1”) with color, say yellow. 3. Select new layer 4. Select new object 5. Modify → Move / Copy 6. Click reference point 7. Click target point same as reference point 8. In “Move / Copy Options” dialog, select “Delete Original” and check “Use current layer and attributes.” Click OK.
The moved object stays on the layer it was previously on. Using “Move / Copy” as a quick way to move a selection between layers is not useful even though it appears to be the recommended way in a Google search.
Note: if “Keep Original” is selected instead, the copied object is placed on the current layer and the original object remains on its layer, as expected.
Note: if the target point is different from the reference point, the moved object is placed on the current layer as expected.
There are other workarounds too, cut / paste with “To current layer” checked seems to work, as does chaging the layer in the Properties Editor.
|
|
2537 | QCAD (main) | Feature Request | Low | More variants for converting element types could be use... | Assigned | |
|
Task Description
I don’t actually have any use for this idea currently, but am just posting it here to document it for consideration.
Basically, it occurred to me at least a few more useful conversions between shapes besides the existing ones could be useful.
For example:
Converting lines into axially aligned rectangles of a specified “radius” or “diameter” (with an option to delete or keep the original line geometry).
An option for the above (lines –> rectangles) that causes the intersections between the resulting rectangles to be automatically removed, like a kind of “automatic/magic wall creation tool” based on laying down lines instead of rectangles and then converting via this tool.
Converting circles/ellipses and rectangles back and forth between each other via their bounding volumes. It seems reasonably likely that people will sometimes want to convert circular design elements into rectangular ones and vice versa (e.g. deciding a rectangular column makes more sense than a cylindrical one and vice versa).
Converting any arbitrary selection into a corresponding bounding circle (not rectangle, which already exists) of sufficient size to enclose all points in the selection.
Basically, QCAD already has tools for converting shapes with operations that are a natural fit for the existing geometry, but has less tools for converting to entirely different geometry, but such uses could actually still be very useful potentially!
It seems likely to be common enough as a use case to merit inclusion, rather than just using scripting.
I don’t have any pressing need for these and I know that I could script them to create them if I really wanted to.
These are relatively minor ideas. I’m just putting this out here as more ideas for making this already wonderful software even better. :)
|
|
2233 | QCAD/CAM | Feature Request | Low | More selection options to select sheets for nesting | Assigned | |
|
Task Description
I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.
|
|
1676 | QCAD (main) | Feature Request | Low | Modify > Explode: explode lines / arcs with line patter... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4333
|
|
2169 | QCAD (main) | Bug Report | Low | Missing G-Code G00 X0 Y0 when placing hole at x0 y0 | Assigned | |
|
Task Description
When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code. So the first cut was made at the current position of the tool, not at x0 y0!
|
|
2396 | QCAD (main) | Bug Report | Low | Missing Dim/Label Format information from an extern wri... | Assigned | |
|
Task Description
Please refer to forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9556
The attached example file is written with a third party CAD program in R15. Opened in QCAD CE all Dim/Label information are available. If I load this drawing in QCAD Pro the Dim/Label information are lost.
If I load and save the example drawing with CE the newly written dxf is readable in Pro without any issue.
|
|
836 | QCAD (main) | Feature Request | Low | Merge different Offset tools into just two | Assigned | |
|
Task Description
Merge Parallel Line(with distance), Concentric Arc(with distance), Concentric Circle(with distance) and Offset(Polyline) into one generic Offset with distance tool that if possible also works for ellipses and splines.
Do the same for the “through point” tools so that there also is just one Offset through point tool.
The Offset tools could be located with the Modification tools.
|
|
1982 | QCAD (main) | Feature Request | Low | measure DIN 1356 | Assigned | |
|
Task Description
To measure in the format DIN 1356 , Architect It is hard work to do this manual input with meta characters.
|
|
604 | QCAD (main) | Feature Request | Low | Measure and record X,Y coordinates tool - add to info ... | Assigned | |
|
Task Description
Feature request See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015
Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.
|
|
1371 | QCAD (main) | Feature Request | Low | Matrix - Modify, missing Flip Horizonatal and Vertical ... | Assigned | |
|
Task Description
Matrix - Modify, add Flip Horizonatal and Vertical tools
|
|
1005 | QCAD (main) | Feature Request | Low | Making use of mouse buttons configurable | Assigned | |
|
Task Description
According to the help, one requires a middle mouse to pan. Since few standard mice have middle buttons, this is a poor choice for this all important function. The default should be the right mouse button when ever the mouse is placed in an open area with nothing else to select. That way right click can still be used to invoke a pop down menu when ever the mouse is placed over an object that might have a need for pop down menu options. Additionally, the Pan mouse key should be alterable and selectable from a Preferences option, since if one does have a three button mouse, we should not prevent a user from employing this hardware if they have it. The same might be said for all mouse buttons to allow the user to configure the mouse operation to that which is most comfortable and efficient for their tasks.
|
|
1740 | QCAD (main) | Suggestion | Low | Make unprintable layers also hidden in print preview | Assigned | |
|
Task Description
Make unprintable layers also hidden in print preview
|
|
2530 | QCAD (main) | Feature Request | Low | Make it possible to control the tooltip delay time when... | Assigned | |
|
Task Description
I noticed that every time I move my mouse from the main working canvas (schematic area) to the tool buttons on the left sidebar there is a delay before the first hover tooltip (which displays the tool names and hotkeys corresponding to each tool button) displays.
The tooltips remain fast (near instant) after that initial hover, but it it would be nice if there was an option field for controlling how long the tooltip delay is for that initial display delay.
Currently, on my Windows 10 machine, it takes about 1 full second for the tooltip to show, which may not sound like much but feels like a lot when trying to work faster.
Here is a link to the related forum discussion, which also discussed a different (and I’d say more useful/effective) idea as well.
I’m creating two separate Bugtracker submissions for that one thread though, to keep things clean.
Perhaps I should have created two separate forum thread for that to begin with.
|
|
948 | QCAD (main) | Bug Report | Low | mainwindow example segfaults | Assigned | |
|
Task Description
As far as I can tell, it never worked.
#0 0x0000000000490527 in QFormInternal::domPropertyToVariant ()
No symbol table info available.
#1 0x000000000042aea9 in QFormInternal::QAbstractFormBuilder::toVariant ()
No symbol table info available.
#2 0x00000000004498a6 in QFormInternal::QFormBuilder::applyProperties ()
No symbol table info available.
#3 0x000000000042475f in QFormInternal::FormBuilderPrivate::applyProperties ()
No symbol table info available.
#4 0x000000000042e83b in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#5 0x00000000004493c0 in QFormInternal::QFormBuilder::create ()
No symbol table info available.
#6 0x000000000042182e in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#7 0x000000000042fa37 in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#8 0x00000000004225a2 in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#9 0x0000000815eed3d7 in QFormInternal::QAbstractFormBuilder::load ()
from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#10 0x0000000815ededad in QUiLoader::load () from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#11 0x0000000815eda326 in qtscript_QUiLoader_prototype_call (context=0x813262240)
at ../../generated_cpp/com_trolltech_qt_uitools/qtscript_QUiLoader.cpp:282
_q_arg0 = (QIODevice *) 0x813fe5610
_q_arg1 = (QWidget *) 0x813ffdcd0
_q_result = (QWidget *) 0x8006e2c00
_id = <value optimized out>
_q_self = (QUiLoader *) 0x813f08d40
#12 0x0000000805fc9f78 in QScript::FunctionWrapper::proxyCall () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#13 0x0000000805ee418f in QTJSC::NativeFuncWrapper::operator() () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#14 0x0000000805eb93ee in QTJSC::Interpreter::privateExecute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#15 0x0000000805ec1ccd in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#16 0x0000000805ec1ff9 in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#17 0x0000000805fa9743 in QScriptEnginePrivate::evaluateHelper () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#18 0x0000000805faabc6 in QScriptEngine::evaluate () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#19 0x0000000800ac5aae in RScriptHandlerEcma::eval (this=0x811f435e0, script=<value optimized out>,
fileName=<value optimized out>) at RScriptHandlerEcma.cpp:855
err = {d_ptr = {d = 0x7fffffffcf50}}
#20 0x0000000800ac65c5 in RScriptHandlerEcma::doScript (this=0x811f435e0, scriptFile=@0x7fffffffd2f0,
arguments=<value optimized out>) at RScriptHandlerEcma.cpp:851
fi = {d_ptr = {d = 0x813f94700}}
globalObject = {d_ptr = {d = 0x813ff1240}}
contents = {static null = {<No data fields>}, static shared_null = {ref = {_q_value = 3936}, alloc = 0, size = 0,
data = 0x809bb387a, clean = 0, simpletext = 0, righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}},
static shared_empty = {ref = {_q_value = 19}, alloc = 0, size = 0, data = 0x809bb389a, clean = 0, simpletext = 0,
righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}}, d = 0x811c11800, static codecForCStrings = 0x0}
#21 0x0000000000417d13 in MainWindow (this=0x7fffffffd4b0, parent=<value optimized out>) at MainWindow.cpp:99
No locals.
#22 0x0000000000416ad9 in main (argc=1, argv=<value optimized out>) at main.cpp:35
app = <value optimized out>
window = {<QMainWindow> = {<QWidget> = {<QObject> = {_vptr$QObject = 0x4992b0, static staticMetaObject = {d = {
superdata = 0x0, stringdata = 0x809933ae0 "QObject", data = 0x809933b80, extradata = 0x809ba94c0}},
static staticMetaObjectExtraData = {objects = 0x0,
static_metacall = 0x80985cd80 <QObject::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}, d_ptr = {
d = 0x811d28600}, static staticQtMetaObject = {d = {superdata = 0x0, stringdata = 0x80993cc40 "Qt",
data = 0x809940560, extradata = 0x0}}}, <QPaintDevice> = {_vptr$QPaintDevice = 0x499478, painters = 0},
static staticMetaObject = {d = {superdata = 0x809ba94e0, stringdata = 0x808e66be0 "QWidget", data = 0x808e670c0,
extradata = 0x809282360}}, static staticMetaObjectExtraData = {objects = 0x0,
static_metacall = 0x8087899a0 <QWidget::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>},
data = 0x811d28748}, static staticMetaObject = {d = {superdata = 0x809282380, stringdata = 0x808ec04c0 "QMainWindow",
data = 0x808ec0660, extradata = 0x8092abc60}}, static staticMetaObjectExtraData = {objects = 0x8092d1880,
static_metacall = 0x808e5aaf0 <QMainWindow::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}},
documentInterface = 0x811d31600}
ret = <value optimized out>
|
|
2226 | QCAD (main) | Feature Request | Very Low | macOS: support proxy icon | Assigned | |
|
Task Description
Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.
|
|
2467 | QCAD (main) | Bug Report | Low | macOS M1/M2 setup with multiple screens: crash during i... | Assigned | |
|
Task Description
I sometimes start QCAD Pro on a project and then go do something else after a while, leaving it open in the background.
At least 5 times now it died in this state, in the background, without user activity, giving me the ‘quit unexpectedly’ dialog.
Here’s some part of the log that macOS collects when that happens:
-------------------------------------
Translated Report (Full Report Below)
-------------------------------------
Process: QCAD-Pro [62952]
Path: /Applications/QCAD-Pro.app/Contents/MacOS/QCAD-Pro
Identifier: org.qcad
Version: 3.28 (3.28.0)
Code Type: ARM-64 (Native)
Parent Process: launchd [1]
User ID: 501
Date/Time: 2023-04-15 15:39:31.3443 +0200
OS Version: macOS 13.3.1 (22E261)
Report Version: 12
Anonymous UUID: 7BF39A64-2E31-A624-4A66-896554C6DEC0
Sleep/Wake UUID: 8D811F79-BAFA-4D25-BDA4-DF99AEE2DE0E
Time Awake Since Boot: 300000 seconds
Time Since Wake: 1 seconds
System Integrity Protection: enabled
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000018
Exception Codes: 0x0000000000000001, 0x0000000000000018
Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11
Terminating Process: exc handler [62952]
VM Region Info: 0x18 is not in any region. Bytes before following region: 105553518919656
REGION TYPE START - END [ VSIZE] PRT/MAX SHRMOD REGION DETAIL
UNUSED SPACE AT START
--->
MALLOC_NANO (reserved) 600018000000-600020000000 [128.0M] rw-/rwx SM=NUL ...(unallocated)
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 QtGui 0x104c3b884 QMacCGContext::QMacCGContext(QPainter*) + 44
1 libqmacstyle.dylib 0x1063fe838 0x1063f4000 + 43064
2 libqmacstyle.dylib 0x106405fec 0x1063f4000 + 73708
3 QtWidgets 0x1055263e4 QCommonStyle::drawControl(QStyle::ControlElement, QStyleOption const*, QPainter*, QWidget const*) const + 2132
4 libqmacstyle.dylib 0x10640379c 0x1063f4000 + 63388
5 QtWidgets 0x105562000 0x1054b4000 + 712704
6 QtWidgets 0x10568c474 QTabBar::paintEvent(QPaintEvent*) + 1584
7 QtWidgets 0x105508f70 QWidget::event(QEvent*) + 132
8 QtWidgets 0x10568bcd4 QTabBar::event(QEvent*) + 736
9 QtWidgets 0x1054bf520 QApplicationPrivate::notify_helper(QObject*, QEvent*) + 272
10 QtWidgets 0x1054c0ffc QApplication::notify(QObject*, QEvent*) + 3396
11 QtCore 0x1065b7570 QCoreApplication::notifyInternal2(QObject*, QEvent*) + 292
12 QtWidgets 0x1054fc214 QWidgetPrivate::drawWidget(QPaintDevice*, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 3312
13 QtWidgets 0x105503890 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 864
14 QtWidgets 0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
15 QtWidgets 0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
16 QtWidgets 0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
17 QtWidgets 0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
18 QtWidgets 0x1054fc314 QWidgetPrivate::drawWidget(QPaintDevice*, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 3568
19 QtWidgets 0x105519aec QWidgetRepaintManager::paintAndFlush() + 3872
20 QtWidgets 0x105519d70 QWidgetRepaintManager::sync() + 252
21 QtWidgets 0x105509410 QWidget::event(QEvent*) + 1316
22 QtWidgets 0x105624f10 QMainWindow::event(QEvent*) + 248
23 QtWidgets 0x1054bf520 QApplicationPrivate::notify_helper(QObject*, QEvent*) + 272
24 QtWidgets 0x1054c0ffc QApplication::notify(QObject*, QEvent*) + 3396
25 QtCore 0x1065b7570 QCoreApplication::notifyInternal2(QObject*, QEvent*) + 292
26 QtWidgets 0x105516800 QWidgetRepaintManager::sendUpdateRequest(QWidget*, QWidgetRepaintManager::UpdateTime) + 604
27 QtWidgets 0x105516540 void QWidgetRepaintManager::markDirty<QRect>(QRect const&, QWidget*, QWidgetRepaintManager::UpdateTime, QWidgetRepaintManager::BufferState) + 1748
28 QtWidgets 0x10551fdcc 0x1054b4000 + 441804
29 QtCore 0x106600ce4 0x106550000 + 724196
30 QtGui 0x1049b47c4 QWindowPrivate::emitScreenChangedRecursion(QScreen*) + 80
31 QtGui 0x1049aa348 QScreen::~QScreen() + 700
32 QtGui 0x1049aa3b0 QScreen::~QScreen() + 12
33 QtGui 0x1049bec7c QWindowSystemInterface::handleScreenRemoved(QPlatformScreen*) + 36
34 libqcocoa.dylib 0x103de7d80 0x103db8000 + 195968
35 libqcocoa.dylib 0x103de65d0 0x103db8000 + 189904
36 libqcocoa.dylib 0x103dfb014 0x103db8000 + 274452
37 QtCore 0x1065c63d8 QMetaMethod::invoke(QObject*, Qt::ConnectionType, QGenericReturnArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument) const + 1072
38 libqcocoa.dylib 0x103dfe45c 0x103db8000 + 287836
39 CoreFoundation 0x18e193240 __CFNOTIFICATIONCENTER_IS_CALLING_OUT_TO_AN_OBSERVER__ + 128
40 CoreFoundation 0x18e22ef30 ___CFXRegistrationPost_block_invoke + 88
41 CoreFoundation 0x18e22ee78 _CFXRegistrationPost + 440
42 CoreFoundation 0x18e164580 _CFXNotificationPost + 704
43 Foundation 0x18f0c19e4 -[NSNotificationCenter postNotificationName:object:userInfo:] + 88
44 AppKit 0x1915834bc __67-[NSWindow _updateSettingsSendingScreenChangeNotificationToScreen:]_block_invoke + 496
45 AppKit 0x1913ff7e0 NSPerformVisuallyAtomicChange + 108
46 AppKit 0x1915832c0 -[NSWindow _updateSettingsSendingScreenChangeNotificationToScreen:] + 96
47 AppKit 0x1916c3ec0 -[NSWindow _screenChanged:] + 136
48 AppKit 0x1916c3e18 -[NSWindow _displayChangedSoAdjustWindows:] + 112
49 AppKit 0x191d3156c -[_NSFullScreenContentController displayChanged] + 28
50 AppKit 0x191dd5834 -[_NSFullScreenSpace displayChanged] + 48
51 AppKit 0x191dd4504 _fullScreenInstanceMovedSpaces + 208
52 SkyLight 0x192da9e34 (anonymous namespace)::notify_datagram_handler(unsigned int, CGSDatagramType, void*, unsigned long, void*) + 888
53 SkyLight 0x1930e9c84 CGSDatagramReadStream::dispatchMainQueueDatagrams() + 228
54 SkyLight 0x1930e9b80 invocation function for block in CGSDatagramReadStream::mainQueueWakeup() + 28
55 libdispatch.dylib 0x18df0e874 _dispatch_call_block_and_release + 32
56 libdispatch.dylib 0x18df10400 _dispatch_client_callout + 20
57 libdispatch.dylib 0x18df1ebf8 _dispatch_main_queue_drain + 928
58 libdispatch.dylib 0x18df1e848 _dispatch_main_queue_callback_4CF + 44
59 CoreFoundation 0x18e1dfc88 __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 16
60 CoreFoundation 0x18e19d4a8 __CFRunLoopRun + 1992
61 CoreFoundation 0x18e19c58c CFRunLoopRunSpecific + 612
62 HIToolbox 0x1979d1df4 RunCurrentEventLoopInMode + 292
63 HIToolbox 0x1979d1c30 ReceiveNextEventCommon + 648
64 HIToolbox 0x1979d1988 _BlockUntilNextEventMatchingListInModeWithFilter + 76
65 AppKit 0x1913bbf58 _DPSNextEvent + 636
66 AppKit 0x1913bb0f4 -[NSApplication(NSEvent) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 716
67 AppKit 0x1913af558 -[NSApplication run] + 464
68 libqcocoa.dylib 0x103dcd0d8 0x103db8000 + 86232
69 QtCore 0x1065c0994 QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) + 532
70 QtCore 0x1065b7c0c QCoreApplication::exec() + 128
71 libqcadjsapi.dylib 0x116ab5648 QCoreApplication_WrapperSingleton::exec() + 24
72 libqcadjsapi.dylib 0x11625d1b8 QCoreApplication_WrapperSingleton::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) + 684
73 libqcadjsapi.dylib 0x11625d930 QCoreApplication_WrapperSingleton::qt_metacall(QMetaObject::Call, int, void**) + 100
74 QtQml 0x1045e58f8 0x1044b8000 + 1235192
75 QtQml 0x1045e245c 0x1044b8000 + 1221724
76 QtQml 0x1045e0f30 QV4::QObjectMethod::callInternal(QV4::Value const*, QV4::Value const*, int) const + 956
77 QtQml 0x1045fef88 QV4::Runtime::CallProperty::call(QV4::ExecutionEngine*, QV4::Value const&, int, QV4::Value*, int) + 420
78 QtQml 0x10462bc00 0x1044b8000 + 1522688
79 QtQml 0x10462aaec 0x1044b8000 + 1518316
80 QtQml 0x1045a5c18 0x1044b8000 + 973848
81 QtQml 0x1045fef88 QV4::Runtime::CallProperty::call(QV4::ExecutionEngine*, QV4::Value const&, int, QV4::Value*, int) + 420
82 QtQml 0x10462bc00 0x1044b8000 + 1522688
83 QtQml 0x10462aaec 0x1044b8000 + 1518316
84 QtQml 0x1045a5c18 0x1044b8000 + 973848
85 QtQml 0x1045fed60 QV4::Runtime::CallName::call(QV4::ExecutionEngine*, int, QV4::Value*, int) + 388
86 QtQml 0x10462c11c 0x1044b8000 + 1523996
87 QtQml 0x10462aaec 0x1044b8000 + 1518316
88 QtQml 0x1045a2744 QV4::Function::call(QV4::Value const*, QV4::Value const*, int, QV4::ExecutionContext*) + 368
89 QtQml 0x104603dfc QV4::Script::run(QV4::Value const*) + 228
90 QtQml 0x10454a5a0 QJSEngine::evaluate(QString const&, QString const&, int, QList<QString>*) + 336
91 libqcadjsapi.dylib 0x11692bf9c RScriptHandlerJs::doScript(QString const&, QList<QString> const&) + 336
92 libqcadcore.dylib 0x1036fd5b8 RScriptHandler::autostart(QString const&, QList<QString> const&) + 2000
93 QCAD-Pro 0x102f7d87c main + 4996
94 dyld 0x18dd67f28 start + 2236
Thread 1:: com.apple.CFSocket.private
0 libsystem_kernel.dylib 0x18e08aff0 __select + 8
1 CoreFoundation 0x18e1c81e8 __CFSocketManager + 636
2 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
3 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 2:: com.apple.NSEventThread
0 libsystem_kernel.dylib 0x18e07ff14 mach_msg2_trap + 8
1 libsystem_kernel.dylib 0x18e092240 mach_msg2_internal + 80
2 libsystem_kernel.dylib 0x18e088b78 mach_msg_overwrite + 604
3 libsystem_kernel.dylib 0x18e080290 mach_msg + 24
4 CoreFoundation 0x18e19e8b8 __CFRunLoopServiceMachPort + 160
5 CoreFoundation 0x18e19d198 __CFRunLoopRun + 1208
6 CoreFoundation 0x18e19c58c CFRunLoopRunSpecific + 612
7 AppKit 0x1914e6508 _NSEventThread + 172
8 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
9 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 3:
0 libsystem_pthread.dylib 0x18e0bad8c start_wqthread + 0
Thread 4:
0 libsystem_pthread.dylib 0x18e0bad8c start_wqthread + 0
Thread 5:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 6:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 7:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 8:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 9:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 10:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 11:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 12:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 13:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 14:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 15:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 16:: Thread (pooled)
0 libsystem_kernel.dylib 0x18e083710 __psynch_cvwait + 8
1 libsystem_pthread.dylib 0x18e0c0574 _pthread_cond_wait + 1232
2 QtCore 0x1067282f4 0x106550000 + 1934068
3 QtCore 0x106727fac 0x106550000 + 1933228
4 QtCore 0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5 QtCore 0x106722630 0x106550000 + 1910320
6 QtCore 0x10671e374 0x106550000 + 1893236
7 libsystem_pthread.dylib 0x18e0bffa8 _pthread_start + 148
8 libsystem_pthread.dylib 0x18e0bada0 thread_start + 8
Thread 0 crashed with ARM Thread State (64-bit):
x0: 0x0000000000000000 x1: 0x000000016ce88f28 x2: 0x000000016ce88f00 x3: 0x000000016ce88f28
x4: 0x000000016ce88d68 x5: 0x0000000000000011 x6: 0x0000000000000000 x7: 0x000000016ce87ed8
x8: 0x0000000113f799f0 x9: 0x0000000106418530 x10: 0x0000000000179f41 x11: 0x0000000000219e00
x12: 0x000000012de03fa8 x13: 0x0000000000000020 x14: 0x000000012de00000 x15: 0x0000000000000020
x16: 0x0000000104c3bb34 x17: 0x000000012dea34d0 x18: 0x0000000000000000 x19: 0x000000016ce88bd8
x20: 0x0000000000000000 x21: 0x000000016ce88f28 x22: 0x000000014de58530 x23: 0x000000014de58530
x24: 0x0000000000000001 x25: 0x0000000000008001 x26: 0x0000000000008000 x27: 0x00000001e9523460
x28: 0x0000000000000002 fp: 0x000000016ce88ba0 lr: 0x0000000104c3b880
sp: 0x000000016ce88b40 pc: 0x0000000104c3b884 cpsr: 0x60001000
far: 0x0000000000000018 esr: 0x92000006 (Data Abort) byte read Translation fault
Binary Images:
0x102f70000 - 0x102f7ffff org.qcad (3.28) <50923e35-b0f4-33ad-87b5-c80b6e07fb18> /Applications/QCAD-Pro.app/Contents/MacOS/QCAD-Pro
0x1035cc000 - 0x1039fffff libqcadcore.dylib (*) <68b6cf9d-e03f-30ac-a74f-0fae66240b13> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadcore.dylib
0x103100000 - 0x1031a3fff libqcadentity.dylib (*) <185c94cd-8860-3723-9c74-185a1b18c0e0> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadentity.dylib
0x10323c000 - 0x103293fff libqcadgui.dylib (*) <57e28a4d-f6fd-3b3d-9465-702d9b0dbb86> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadgui.dylib
0x102ff4000 - 0x103003fff libqcadgrid.dylib (*) <2d7b7164-4c14-3ce7-bbe0-49ec38a68fa0> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadgrid.dylib
0x103050000 - 0x10306ffff libqcadoperations.dylib (*) <c884af96-582c-3be3-a77e-100c27bfbb77> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadoperations.dylib
0x10308c000 - 0x10309ffff libqcadsnap.dylib (*) <0630cbf2-cbeb-3a02-8fa7-e0c17fdb666c> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadsnap.dylib
0x103014000 - 0x10301ffff libqcadspatialindex.dylib (*) <d834db84-bb6b-369c-b967-1148a481ed6f> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadspatialindex.dylib
0x103370000 - 0x1033b7fff libspatialindexnavel.dylib (*) <05a48089-e554-3429-b0c3-eccd0fc9f1f3> /Applications/QCAD-Pro.app/Contents/Frameworks/libspatialindexnavel.dylib
0x103514000 - 0x103573fff org.qt-project.QtOpenGL (6.4) <6fe5bbb7-45dc-316b-8c8f-4d455fee11ad> /Applications/QCAD-Pro.app/Contents/Frameworks/QtOpenGL.framework/Versions/A/QtOpenGL
0x1030b4000 - 0x1030dffff org.qt-project.QtSql (6.4) <3974ce4c-632e-3d00-bbd1-088875642482> /Applications/QCAD-Pro.app/Contents/Frameworks/QtSql.framework/Versions/A/QtSql
0x1032fc000 - 0x103333fff org.qt-project.QtSvg (6.4) <4c4477bd-616f-3de0-912d-934a2b143af2> /Applications/QCAD-Pro.app/Contents/Frameworks/QtSvg.framework/Versions/A/QtSvg
0x103444000 - 0x10345bfff org.qt-project.QtXml (6.4) <e1e4e15c-d26c-3800-b8f1-c8a792ffec55> /Applications/QCAD-Pro.app/Contents/Frameworks/QtXml.framework/Versions/A/QtXml
0x1044b8000 - 0x10482ffff org.qt-project.QtQml (6.4) <51bb2e01-4ec1-3719-a2f6-36cf30380e0e> /Applications/QCAD-Pro.app/Contents/Frameworks/QtQml.framework/Versions/A/QtQml
0x103ea0000 - 0x103fa7fff org.qt-project.QtNetwork (6.4) <2d4bab25-001a-3333-b3db-b95d9aca025f> /Applications/QCAD-Pro.app/Contents/Frameworks/QtNetwork.framework/Versions/A/QtNetwork
0x103474000 - 0x1034bbfff org.qt-project.QtPrintSupport (6.4) <2c160c73-f509-3e7b-b281-1e17179314d2> /Applications/QCAD-Pro.app/Contents/Frameworks/QtPrintSupport.framework/Versions/A/QtPrintSupport
0x1054b4000 - 0x105903fff org.qt-project.QtWidgets (6.4) <d4530615-1625-3bd4-ad4f-c808d616fd39> /Applications/QCAD-Pro.app/Contents/Frameworks/QtWidgets.framework/Versions/A/QtWidgets
0x1048f0000 - 0x104f03fff org.qt-project.QtGui (6.4) <755184d6-c551-391a-b2ed-6413cb06df19> /Applications/QCAD-Pro.app/Contents/Frameworks/QtGui.framework/Versions/A/QtGui
0x106550000 - 0x1069bbfff org.qt-project.QtCore (6.4) <0039ed8f-97d9-3555-a1fb-c8281b2a9e1c> /Applications/QCAD-Pro.app/Contents/Frameworks/QtCore.framework/Versions/A/QtCore
0x102fd4000 - 0x102fd7fff org.qt-project.QtConcurrent (6.4) <b2015105-c358-332c-8b3f-5debfd79c737> /Applications/QCAD-Pro.app/Contents/Frameworks/QtConcurrent.framework/Versions/A/QtConcurrent
0x103d18000 - 0x103d93fff org.qt-project.QtDBus (6.4) <63c9ff9a-567f-3dac-8abc-3c30823ab0c2> /Applications/QCAD-Pro.app/Contents/Frameworks/QtDBus.framework/Versions/A/QtDBus
0x103db8000 - 0x103e4ffff libqcocoa.dylib (*) <d3d12a1e-d996-3265-885a-a8e474f79f50> /Applications/QCAD-Pro.app/Contents/PlugIns/platforms/libqcocoa.dylib
0x1063f4000 - 0x106417fff libqmacstyle.dylib (*) <52b5adc6-8fd3-3577-9c61-ed57cfe4032e> /Applications/QCAD-Pro.app/Contents/PlugIns/styles/libqmacstyle.dylib
0x10dc48000 - 0x110467fff libqcaddwg.dylib (*) <97457f76-7e3d-3eaf-a495-534031592cb6> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcaddwg.dylib
0x106434000 - 0x1064e7fff org.qt-project.QtCore5Compat (6.4) <8437f179-2c2b-3e52-938f-3a0d3dda4d14> /Applications/QCAD-Pro.app/Contents/Frameworks/QtCore5Compat.framework/Versions/A/QtCore5Compat
0x109c34000 - 0x109c87fff libqcaddxf.dylib (*) <6b64540e-e48a-3cdb-96f3-d596dcd2c3e6> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcaddxf.dylib
0x116200000 - 0x11919bfff libqcadjsapi.dylib (*) <3b3a8e88-1c63-3489-8045-f2ddaa719727> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadjsapi.dylib
0x105464000 - 0x105477fff libqcadstemmer.dylib (*) <7a8fbfa6-eb3a-341b-a3ba-5703dbbdc01d> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadstemmer.dylib
0x109d18000 - 0x109d4ffff libqcadpolygon.dylib (*) <9f63281b-3e5c-3eaa-97a5-206e21f5d899> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadpolygon.dylib
0x109e7c000 - 0x109edffff org.qt-project.QtUiTools (6.4) <516ccc55-f406-3440-b0e8-9e02016a67db> /Applications/QCAD-Pro.app/Contents/Frameworks/QtUiTools.framework/Versions/A/QtUiTools
0x106508000 - 0x10650ffff org.qt-project.QtOpenGLWidgets (6.4) <41848e91-ab63-32f6-b910-fd0bb41ad833> /Applications/QCAD-Pro.app/Contents/Frameworks/QtOpenGLWidgets.framework/Versions/A/QtOpenGLWidgets
0x105440000 - 0x105447fff libconcavehull.dylib (*) <d837fe15-b71a-3baa-8e53-a5368e9a6340> /Applications/QCAD-Pro.app/Contents/Frameworks/libconcavehull.dylib
0x10a43c000 - 0x10a887fff libqcadpdf.dylib (*) <093902bd-646d-3997-a16d-f2f07180189c> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadpdf.dylib
0x10b0a4000 - 0x10b7a7fff libqcadproscripts.dylib (*) <d8cdf77e-e618-3ae8-bb92-42999537eb7e> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadproscripts.dylib
0x10c3ac000 - 0x10cf67fff libqcadscripts.dylib (*) <8018c668-8fb9-3b03-8a2e-ebae0dbc23c8> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadscripts.dylib
0x109cc0000 - 0x109cd3fff libqcadshp.dylib (*) <ab708ab4-c3a9-3758-84fc-4f0ff08ff60d> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadshp.dylib
0x106524000 - 0x10652bfff libqgif.dylib (*) <fabce6ac-714a-3884-bd73-6faf33bbd4d2> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqgif.dylib
0x109d70000 - 0x109d77fff libqwbmp.dylib (*) <dc542b64-fd8e-30ba-864f-099d1e5a788b> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqwbmp.dylib
0x109d88000 - 0x109df3fff libqwebp.dylib (*) <275f6c12-b594-3ec1-8002-afae818a8deb> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqwebp.dylib
0x109e08000 - 0x109e0ffff libqico.dylib (*) <c39c4792-e821-3d0e-a51e-4c91092b2cbf> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqico.dylib
0x109e20000 - 0x109e27fff libqmacheif.dylib (*) <28e973af-8681-333a-8e06-ca0ef139c6f1> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqmacheif.dylib
0x10af88000 - 0x10afc7fff libqjpeg.dylib (*) <4a19d30b-c91f-3c5e-93e6-313b73aded30> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqjpeg.dylib
0x10afdc000 - 0x10b03bfff libqtiff.dylib (*) <ebd99856-9f3e-374d-adec-78591b8e5ecb> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqtiff.dylib
0x109e38000 - 0x109e3ffff libqsvg.dylib (*) <55448c8b-cdbb-3509-8e76-498a4e6909c1> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqsvg.dylib
0x109e50000 - 0x109e57fff libqicns.dylib (*) <fb8078bc-26e3-3404-9712-2820f6dccc99> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqicns.dylib
0x10a348000 - 0x10a34ffff libqtga.dylib (*) <ae8c892d-3d68-32e2-823e-02d20a1273ae> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqtga.dylib
0x10a360000 - 0x10a367fff libqmacjp2.dylib (*) <3a65cf03-f572-371d-813a-469eedc9151f> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqmacjp2.dylib
0x1054a0000 - 0x1054abfff libobjc-trampolines.dylib (*) <80f14f3d-d099-3693-a8e0-eb9a526b1790> /usr/lib/libobjc-trampolines.dylib
0x10dc14000 - 0x10dc1ffff libqsvgicon.dylib (*) <59fc1d66-aaf2-3b22-8dd8-2eca5e04bf88> /Applications/QCAD-Pro.app/Contents/PlugIns/iconengines/libqsvgicon.dylib
0x113748000 - 0x113757fff libqcadcustomwidgets.dylib (*) <8f944d85-4001-384d-befb-d6c2c9fe74c2> /Applications/QCAD-Pro.app/Contents/PlugIns/designer/libqcadcustomwidgets.dylib
0x18e11f000 - 0x18e5f8fff com.apple.CoreFoundation (6.9) <b4fdaece-9727-3969-b014-27f7f24c8e01> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x18f0b8000 - 0x18fa7dfff com.apple.Foundation (6.9) <b7d67e5a-dce2-3f6b-b2b8-895a3669e3ec> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x191383000 - 0x192291fff com.apple.AppKit (6.9) <cc3e5215-4cd7-364c-8750-6eb7002720ce> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x192d9f000 - 0x1931c7fff com.apple.SkyLight (1.600.0) <e3d1dd9e-fa1b-332e-86ba-cc2915276118> /System/Library/PrivateFrameworks/SkyLight.framework/Versions/A/SkyLight
0x18df0c000 - 0x18df53fff libdispatch.dylib (*) <8e87dc0e-a570-3933-b37d-5e05ad516206> /usr/lib/system/libdispatch.dylib
0x1979a1000 - 0x197cd4fff com.apple.HIToolbox (2.1.1) <5f34bbf5-653a-31a5-b4b3-0a02c91ab488> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox
0x18dd62000 - 0x18ddf053b dyld (*) <ac277a36-1808-327a-8761-cca585421212> /usr/lib/dyld
0x18e07f000 - 0x18e0b8fe7 libsystem_kernel.dylib (*) <7acbd9bc-d056-310e-858d-81b116cf6d28> /usr/lib/system/libsystem_kernel.dylib
0x18e0b9000 - 0x18e0c5fff libsystem_pthread.dylib (*) <b401cfb3-8dfe-32db-92b3-ba8af0f8ca6e> /usr/lib/system/libsystem_pthread.dylib
0x0 - 0xffffffffffffffff ??? (*) <00000000-0000-0000-0000-000000000000> ???
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=1.4G resident=0K(0%) swapped_out_or_unallocated=1.4G(100%)
Writable regions: Total=5.5G written=0K(0%) resident=0K(0%) swapped_out=0K(0%) unallocated=5.5G(100%)
VIRTUAL REGION
REGION TYPE SIZE COUNT (non-coalesced)
=========== ======= =======
Accelerate framework 256K 2
Activity Tracing 256K 1
CG backing stores 7680K 8
CG image 496K 22
ColorSync 624K 28
CoreAnimation 240K 15
CoreGraphics 48K 3
CoreUI image data 3584K 26
Foundation 48K 2
JS VM Gigacage 76.0M 19
JS VM Isolated Heap 23.2M 22
JS VM Isolated Heap (reserved) 2048K 1 reserved VM address space (unallocated)
Kernel Alloc Once 32K 1
MALLOC 3.1G 160
MALLOC guard page 192K 9
MALLOC_MEDIUM (reserved) 2.0G 17 reserved VM address space (unallocated)
MALLOC_NANO (reserved) 256.0M 1 reserved VM address space (unallocated)
STACK GUARD 56.3M 17
Stack 16.5M 17
VM_ALLOCATE 624K 28
__AUTH 1366K 290
__AUTH_CONST 21.2M 487
__CTF 824 1
__DATA 6428K 527
__DATA_CONST 30.6M 539
__DATA_DIRTY 1488K 168
__FONT_DATA 2352 1
__INFO_FILTER 8 1
__LINKEDIT 850.3M 51
__OBJC_RO 66.2M 1
__OBJC_RW 2011K 1
__TEXT 568.2M 554
dyld private memory 320K 4
mapped file 480.4M 47
shared memory 960K 19
=========== ======= =======
TOTAL 7.5G 3090
TOTAL, minus reserved VM space 5.3G 3090
|
|
1801 | QCAD (main) | Performance Issue | Low | low perfomance in paper space and viewports | Assigned | |
|
Task Description
Improving the performance of the exceptional use of the processors when switching from the model to the paper space (testing with the attached file) the functionalities of the commands for the viewports are too low in the paper space.
|
|
2433 | QCAD (main) | Suggestion | Low | Lock Snap [SQ] fails at snap Middle Manual [SN] | Assigned | |
|
Task Description
e.g: If I use content out of the clipboard to insert it multiple times into the drawing with using the Middle Manual snap [SN] the snap can’t be locked [SQ] and I have to reactivated the snap again and again for every following insert. Other snaps like END or CENTER work flawless in this scenario.
|
|
2290 | QCAD (main) | Bug Report | Very Low | loading the Drawing Preferences using enter, using ente... | Assigned | |
|
Task Description
I use CTRL + I to pull up drawing preferences. Upon changing the dimension settings quickly and closing it normally by pressing enter it closes. But if i go to the next tab (drawing tab) then press enter to load it up quickly instead of pressing CTRL + I. Upon changing the dimensions settings and pressing enter to close it, it won’t close but instead flash and i have to keep pressing enter and eventually it closes.
I think this is a bug.
I have the Pro Version
|
|
1229 | QCAD (main) | Feature Request | Low | Load last project at start | Assigned | |
|
Task Description
When starting QCAD it will open a new, untitled, page causing me to close that, click through the saving option to discard changes and then load up the project i’m working on. It would be nice to have the option for the program to start with the last used project. I checked the application preferences to see if this option was already possible as it’s common with other applications but couldn’t find it. In ‘Startup’ (the obvious place for it) there was only an option for the splash screen.
|
|
1373 | QCAD (main) | Feature Request | Low | Line From Angle - additional option to select exisitng ... | Assigned | |
|
Task Description
Often I find myself clicking on an existing line to determine the angle from the property editor, then copying and pasting this info into the angle field, it would be so very useful to have an additional option in the ‘Line from Angle’ tool to be able to pick an existing entity which would automatically register and fill in the angle for me,then all I would need to do would enter the length required.
|
|
1339 | QCAD (main) | Bug Report | Low | Library Browser unstoppable | Assigned | |
|
Task Description
Hi,
Even with the Application Preference, Library Browser, NO Update on Start up, the Libray Browser scans the directory, a proces that can’t be stopped or closed.
|
|
719 | QCAD (main) | Feature Request | Low | Library Browser additional Function ... | Assigned | |
|
Task Description
It would be nice to get:
In the Create Library Item task → “Save as” a remember Function for the last chosen Path to save the Item ... or a default path what is the same like the settings in the Application Preferences. Right now you have to navigate again and again for every item what you will save in the same directory. If you have to save 20 items - it sacks
Also would it be nice for an easy “Clean up” to have the possibility to delete items directly in the Library Browser window. Right now you have to use extern Programs like the Windows explorer to move or delete items.
|
|
893 | QCAD (main) | Bug Report | Low | Library Browser - Edit Library Item - opens drawings al... | Assigned | |
|
Task Description
Library Browser - Edit Library Item - opens drawings always with grid.
- If I switch between opened drawings back and forth the grid will disappear .... - If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....
Just Cosmetic ...
|
|
1009 | QCAD (main) | Feature Request | Low | Layer Order is Alphabetical vs the Order Defined Origin... | Assigned | |
|
Task Description
It would appear that when QCAD imports a DXF, it reorders the layers into alphabetical order (at least when importing R2011). I have not tested this extensively but on other programs, the order is different from alphabetical. Ideally the operator should be given a choice to order the layers as exported (assuming the DXF format remembers that) or alphabetical. This is because a drawing may have a certain stack up of layers (like a printed circuit board) and then alphabetic ordering is not useful nor desired.
|
|
1278 | QCAD (main) | Feature Request | Low | Layer list: store layer state independently of parent l... | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3755
|
|
2340 | QCAD (main) | Feature Request | Low | Layer List / Block List: Link minus icon to keyboard de... | Assigned | |
|
Task Description
Referring to Layer List / Block List: It would improve the workflow if the Delete key on the keyboard would be linked to the minus icon (Delete). The command ER is also ignored in both list.
|
|
1701 | QCAD (main) | Feature Request | Low | Layer List / Block List: add filter input | Assigned | |
|
Task Description
Add text filter for layer list, block list.
|