QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

1972QCAD (main)Bug ReportLowHatch import fails for boundaries with many very small ...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648

1976QCAD (main)Feature RequestLowEnvelope at offset to a poly toolAssigned
0%
Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?t=6650

1977QCAD (main)Feature RequestLowCorresponding coordinate format Assigned
0%
Task Description

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

1982QCAD (main)Feature RequestLowmeasure DIN 1356Assigned
0%
Task Description

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

2014QCAD (main)Bug ReportLowFocus on Options Toolbar failsAssigned
0%
Task Description

Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.

Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828

2016QCAD (main)Bug ReportLowOffsetting multi selection of polylines halts prematureAssigned
0%
Task Description

See:
https://qcad.org/rsforum/viewtopic.php?&t=6827&p=25992#p25992

Offsetting 32 polys from ellipses fails.
Offsetting 16 polys can be completed with 2 selections for outer and 2 for inner.

For some reason the offset function halts premature.

Regards,
CVH

2031QCAD (main)Bug ReportLowOrdinate Dimensions don't act as expectedAssigned
0%
Task Description

Hi Andrew

I wasn’t sure if this was a bug or feature request, when I’m drawing part sets that only change in lengths I dimension them
to save time then I stretch and save as whatever filename... I was surprised when Qcad reacted the way it did when stretching ordinate
dimensions on a part, the 1st thing I did was window select over the dimensions which didn’t work ( this is the typical way for
stretching ordinate dimensions in AutoCAD,IntelliCad,Draftsight etc )... anyway Husky and I had a fairly long debate and he told me
I had to select the object and only parts of the ordinate dimensions which when stretched leaves a bit of tidying up to do..
Please let me know if I’m going about this the wrong way.. do i really have to do multiple stretches and move all the jogged dimensions?

See Topic https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6901&start=15 It started off with negative values for ordinate dimensions then turned into problems stretching ordinate dimensions..
I also posted dropbox links to quite a few videos..

Attached is a zip file containing some screenshots plus the original dxf file..

Best Regards
John Hyslop

2033QCAD/CAMBug ReportLowRepeated warning message while updating toolpathAssigned
0%
Task Description

While updating or regenerating toolpath on the attached dxf file I repeatedly get the warning message in the attached jpg file. If I keep clicking OK then the toolpath is successfully generated. This did not happen in version 3.23.0 with the same file.

2034QCAD (main)Feature RequestLowPaint Properties to include modifying linetype scales w...Assigned
0%
Task Description

Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result.
QCAD Pro 3.24 Windows10.

2037QCAD (main)Feature RequestLowSupport alternative angle referenceAssigned
0%
Task Description

E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.

2041QCAD (main)Bug ReportLowcircletangent2 doesn't solve correctly if the defining ...Assigned
0%
Task Description

In my example I can’t draw a circle with circletangent2 if the defining point is on one of the defining tangents. The tangency is lost when I try to do this.

I attached 4 screenshots: TheExample.png, TryingPoint1.png, TryingPoint2.png and The_Point_Isn’t_On_The_Tangents.png.

2047QCAD (main)Bug ReportLowQCAD quits when inserting a library item, Ubuntu 19.10 ...Assigned
0%
Task Description

Description:
QCAD quits when trying to insert a library item (PC_1kW.dxf) from the library browser. Both by dragging it or clicking on insert.
Joined a copy of the terminal and dmesg (Linux) and what I found on the windows logs.

- Tested with other libraries elements of the same origin with the same result.
- The file opens normally in QCAD. When you create a block from it, you can re-insert it and it works as expected, try with PC_1kWblock.dxf...
- If you re-create a library item from the file with another name it fails also to insert.
- Tested with a new empty file or with a file containing same blocks...

Now the strange part:

-On a brand new HP Zbook 14u G6 it works flawlessly on Windows but fails on Linux... That was the first computer I tried (with Windows) when I decided that it will replace Draftsight... I was lucky...
-On a 4 years old Lenovo Yoga 14 it fails both on Linux & Windows... This computer has only 8Gb of RAM, but dedicated graphics...
-On a customer’s HP Pavillon 17’’ it fails... He bought a licence & Book of QCAD because of me...
-On my Dell 7720 it fails both on Windows and Linux. This workstation has everything to run any CAD software (64Gb RAM, Xeon 1535M v6, Quadro P5000)
-Reinstallation of the software doesn’t solve the problem. 2 independent sources tested (my download and my customer’s download)

These blocks have a lot of attributes on different layers, needed for the intended usage. I’m developping a script to extract them to a CSV file based on a template file... As on Draftsight.

Looks a lot like  FS#1938 ... But now you have files to test...

I made further testings and this bug is definitely related to the fact that the attributes definitions are on different layers...

If the layer definition exists before the library items is inserted, it works as expected.

If one layer existing in the item definition is missing from the layer list before the item is inserted it fails.

If you create a block from an instance of the library item, and create a new library item with the block, then it can be inserted without problems and the layers are created... But you must explode it first to access the attributes which is not the idea behind the block attributes that should be editable when a block with attributes is inserted.

So at the moment the only way to work is to start with a template document with all the possible layers on which attributes definitions are defined...

Can’t go further in debugging as block attributes are one of the feature of the ‘professional’ version I paid for and are not open source...

Ready and willing to sign a NDA to get access to the sources and make this work if nobody else takes care of this.

2048QCAD (main)Bug ReportLowMove / Copy to current layer fails when reference point...Assigned
0%
Task Description

QCAD 3.24.2 / macOS x86_64 10.14.6

Starting with empty doc:
1. Draw any object (e.g. a rectangle) on layer 0.
2. Create new layer (”1”) with color, say yellow.
3. Select new layer
4. Select new object
5. Modify → Move / Copy
6. Click reference point
7. Click target point same as reference point
8. In “Move / Copy Options” dialog, select “Delete Original” and check “Use current layer and attributes.” Click OK.

The moved object stays on the layer it was previously on. Using “Move / Copy” as a quick way to move a selection between layers is not useful even though it appears to be the recommended way in a Google search.

Note: if “Keep Original” is selected instead, the copied object is placed on the current layer and the original object remains on its layer, as expected.

Note: if the target point is different from the reference point, the moved object is placed on the current layer as expected.

There are other workarounds too, cut / paste with “To current layer” checked seems to work, as does chaging the layer in the Properties Editor.

752QCAD (main)Feature RequestVery LowAdd support for the 3dConnexion Space Navigator (Pan an...Assigned
0%
3 Task Description

The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.

3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand

While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1765QCAD (main)Bug ReportVery LowErrors with polyline offsetAssigned
0%
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360┬░ curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

1426QCAD (main)Feature RequestVery LowLoad drawings that were open when closing QCAD on start...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249

1443QCAD (main)Bug ReportVery LowView > Status Bar remains uncheckedAssigned
0%
Task Description

Status Bar menu remains unchecked even it is toggled on or off

1649QCAD (main)Feature RequestVery LowAdd configuarable format options for saving blocks to l...Assigned
0%
Task Description

Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.

1691QCAD (main)Bug ReportVery LowIssue with Layouts after "File-Revert"Assigned
0%
Task Description

QCad 3.19.2 Professional, 64bit, Liux Mint

Case:
1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically.
2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .

For example can try on “flange.dxf”

1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
0%
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

1760QCAD (main)Bug ReportVery LowSelf-crossing polylines can't be cut twice at segment c...Assigned
0%
Task Description

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 

Regards

1788QCAD (main)Feature RequestVery LowNew snap: reference points of a block referencesAssigned
0%
Task Description

I know this was reported and fixed before ...

https://www.qcad.org/bugtracker/index.php?do=details&task_id=843

... but it looks like we have the issue now back with some kind of variation.

If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.

If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.

Edit: New Test drawing:

1900QCAD (main)Bug ReportVery LowRemote shares initially not accessible.Assigned
0%
Task Description

My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.

While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.

Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.

Drag and Drop from a remote share will never work.

1905QCAD (main)Bug ReportVery LowView > Property Editor: Changing attribute of block cha...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947

1919QCAD (main)Bug ReportVery LowWrong order XY(Z) for Ordinate Dimension in property ed...Assigned
0%
Task Description

Win7pro Qcad Pro 3.22.1.2

In property editor
properties of an Ordinate Dimension

Without Show Z
DefPoint is displayed in order YX?

With Show Z
Origin is displayed in order XZY?
DefPoint is displayed in order YZX?
LeaderEndPoint is displayed in order ZXY?

Regards

1920QCAD (main)Feature RequestVery LowEdit > Application Preferences: Add preference to disab...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447

1922dwg2bmpFeature RequestVery LowAdd error message when requesting raster for a non-exis...Assigned
0%
Task Description

It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D

See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453

1923QCAD (main)Bug ReportVery LowFaulty rendering Polylines with Global/Local Widths and...Assigned
0%
Task Description

Win7pro 32bit Qcad 3.23.0

Andrew,
The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.

In the attached drawing setting the Global Z of the inner poly to 5,10,...

The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly.
It also affects the projected widths of the line inversely, but not by changing the widths properties.

Pritty rare combination! True.
Qcad is 2D native! True.

Flatten will resolve this.

It is not a purely visual rendering fault, the poly will explode as such.

Maybe similar flaw as with uneven scaling blocks with arcs.
https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703

Regards

1974QCAD (main)Bug ReportVery LowFile > Print Preview: Cannot move paper in new drawingUnconfirmed
0%
Task Description

Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.

Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.

Affected versions tested:

Windows 64bit installer download, as of yesterday.
Linux 64bit build from git, about 20minutes ago.

For what it’s worth, this bug is not present in this previous git checkout:

Version:
3.21.1.0 (3.21.1)
Internet:
QCAD.org
Build Date:
Jul 2 2018
Revision:

Qt Version:
5.7.0
Architecture:
x86_64
Compiler:
gcc 6.3.1

Thanks for a great product.

2011QCAD Community EditionSuggestionVery LowUpdate QCAD CE SpatialIndex module to latest versionAssigned
0%
Task Description

Building with the bundled version, 1.8.5, works fine.

When I try to build using the system version, which for Mageia Cauldron is 1.9.3, the build fails.

https://raw.githubusercontent.com/kekePower/mmbl/master/qcad/2019/12/11/20%3A13%3A48/log.qcad

Here is the current spec file for version 3.23.0.4.
https://svnweb.mageia.org/packages/cauldron/qcad/current/SPECS/qcad.spec?revision=1465894&view=markup

It looks like qcad is incompatible with versions above 1.8.5.

Are there plans to port to the new version?

Thanks in advance.

2021QCAD (main)Performance IssueVery LowCannot work with big dwg filesAssigned
0%
Task Description

Openning a big file or doing any action in it, takes minutes to load.
Even dragging the scrollbar slightly left or right, takes mintues to redraw the canvas again, which makes QCAD un-usable for professional use.
Is there a way to make QCAD usable, after loading completed:
- Like suppressing edit until user says so,
- or taking snapshots of rendered canvases to another file and use it, as windows uses thumb.db ( for negative latency :P )

PS: I wish I could help a bit, but my hand are tied. I am just a java freak, I am opt to any idea of porting it to java, if she is still alive.

Tu─čalsan Karabacak
EEE, MSc Mobile Comp & App, IWE

Showing tasks 351 - 384 of 384 Page 8 of 8<<First - 4 - 5 - 6 - 7 - 8

Available keyboard shortcuts

Tasklist

Task Details

Task Editing