|
2341 | QCAD (main) | Feature Request | Low | manage image references | Assigned | |
1 |
Task Description
QCAD. ver. 3.27.1.0 (3.27.1) Qt version: 5.13.2 Architecture: x86_64 OS Windows 11
It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again. I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)
|
|
2351 | QCAD (main) | Feature Request | Low | File Thumbnail Preview | Assigned | |
1 |
Task Description
Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.
|
|
2370 | QCAD (main) | Feature Request | Low | Retain global width / segment widths when reversing pol... | Assigned | |
1 |
Task Description
Andrew,
Changing orientation of a polyline with RV or by changing it in the Property Editor clears the global width value.
Single line pieces as polyline default to CCW. Still the global width is cleared when trying to set them CW.
I didn’t update since 3.27.0 but reading this topic I suppose it still is valid. Related: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9362
Regards, CVH
|
|
2374 | QCAD/CAM | Feature Request | Low | Add Spindle Speed to Toolpath Dialog | Assigned | |
1 |
Task Description
When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.
Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.
Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?
Many thanks’, and best regards.
|
|
2390 | QCAD (main) | Feature Request | Low | Please add U.S. Survey Feet to the Unit / convert list | Assigned | |
1 |
Task Description
Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245
|
|
2416 | QCAD (main) | Feature Request | Low | Automatically set a proper alternating row color for th... | Assigned | |
1 |
Task Description
Andrew,
When switching from Default to Dark mode the text on alternating rows is hardly visible. We can customize this color.
It would be easier if a proper default color is set on switching to and back.
Perhaps the user preferences can be remembered. Perhaps only when the contrast would be affected.
Regards, CVH
|
|
2421 | QCAD (main) | Feature Request | Low | Make the preview of Shorten (LE) more visible | Assigned | |
1 |
Task Description
Andrew,
When we use Lengthen/Shorten (LE) with a positive amount the result is clearly visible when indicating a side of an entity. With a negative amount there is seemingly no preview. It is generated and shown but one can not distinguish it especially with solid lines.
Adding an orthogonal auxiliary preview shape some N pixels long would do the trick.
Regards, CVH
|
|
2428 | QCAD (main) | Feature Request | Low | Implement reversing Leader entities on creation or afte... | Assigned | |
1 |
Task Description
Andrew,
Usually I point to something to start with. Sometimes I want to point away from here but then the arrow is where I just clicked.
An option on creation would be nice. The capability to reverse the Leader orientation afterwards is another method to get it pointing the intended way.
A Leader entity is stored similar as a polyline. I think it would not be difficult to reverse the basic polyline and update the dimension shape accordingly.
Regards, CVH
|
|
2436 | QCAD (main) | Feature Request | Low | Draw > Hatch > Hatch from Segments: mark position of op... | Assigned | |
1 |
Task Description
Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.
Same scenario tested with “Hatch from Selection” (HA) ... ... everything works like a charm
|
|
2446 | QCAD (main) | Feature Request | Low | Extending dimension line beyond extension line when usi... | Assigned | |
1 |
Task Description
I would like the ability to extend dimension lines beyond the extension line when using tick marks. Images are attached and posted here: https://qcad.org/rsforum/viewtopic.php?f=31&t=9785
|
|
2448 | QCAD (main) | Feature Request | Low | Scale lineweight display on model space | Assigned | |
1 |
Task Description
Currently, the model space can display lineweights at scale 1:1 It’s very convenient when drawing small objects that will be printed at scale 1:1 : it makes it easy to anticipate the final aspect of the printed drawing. But this feature is unusable for architects or users who draw large objects.
Therefore, it would be very useful to have a factor to multiply lineweight display in model space. For example : if i know my drawing will probably be printed at scale 1:50, i set the value of the lineweight factor to 50. Then every line would be displayed 50x thicker in model space.
|
|
2452 | QCAD (main) | Feature Request | Very Low | Keyboard Shortcut for Undo Last Point While Drawing Spl... | Assigned | |
1 |
Task Description
Instead of having to click on the toolbar, it would be useful to have a keyboard shortcut for undoing the last fit point (or control point) while drawing splines. Preferably it would also be nice to allow the user the ability to set what the keyboard shortcut is for this function.
|
|
2478 | QCAD (main) | Feature Request | Low | Make RMathLineEdit unit aware | Assigned | |
1 |
Task Description
Andrew,
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10094
When entering 1’ 1’‘ in an input field. - As the size of the rectangle in the topic - As the length property of a line selected in the drawing - ....
Returns 13 in a drawing in mm. And also in a drawing in inch what turns out to be correct. But also in a drawing in foot.
Similar, entering 1’ with a drawing in kilometers it returns 12 units = 12 kilometers.
Regards, CVH
|
|
2501 | QCAD (main) | Feature Request | Very Low | Add spelling checker / spell checker for all text boxes | Assigned | |
1 |
Task Description
Suggestion to add spelling checker / spell checker for all text boxes
|
|
2505 | QCAD (main) | Feature Request | Very Low | Info > Polygonal Area > Use dimension decimal format fo... | Assigned | |
1 |
Task Description
Andrew, On behalf of user Kmeelo
Polygonal Area adds measurements text with 12 decimal digits and then as short as possible.
Current formatting path see: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10450&p=42833#p42805
Related forum feature request: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10458
I also see a misconception of the term ‘precision’. Numbers precision is the amount of significant digits disregarding the position of the decimal point. 12 decimal digits is about the largest precision for numbers with 5 integer digits.
Regards, CVH
|
|
2507 | QCAD/CAM | Feature Request | Low | Add Toolpath from Layer | Assigned | |
1 |
Task Description
I’ve been able to make this work as proof of concept very easily, but many of the functions are inaccessible/difficult to override from post-processors.
Desired functionality:
1) Enable “Add Profile Toolpath” UI elements all the time (remove setRequiresSelection) 2) CAM Profile Toolpath Dialog: Drop-down menu of available Layers. First option “By Selection Only” 3) “By Selection Only” continues to pass EntityIds of selected objects (existing functionality) 4) Choosing an active Layer will use the Layer as source of EntityIds 5) Any changes to Entities on a Layer will result in those new/removed/changed objects being re-generated without having to manually select and update the tool paths. Either do not recover list of EntityIds from the ToolpathBlock, and instead use “live” each time it’s regenerated, or additional functionality to determine if a LayerId is associated with the Toolpath, and then lookup EntityIds.
I assume the persistence of the Layer selection would be available within the Toolpath, so that it will automatically update EntityIds every time a Toolpath is regenerated, without having to select Entities and updating the toolpath manually.
For large projects, being able to force select objects based upon layer dramatically reduces mistakes and speeds up the workflow.
Thanks
|
|
2540 | QCAD (main) | Feature Request | Low | Retain original handle when Hatch properties are change... | Assigned | |
1 |
Task Description
Andrew,
When we alter about any property of a Hatch entity it seems to be recreated with a newer/higher handle. This doesn’t influence the drawing order in direct. But already changing the drawing order of a Hatch it is recreated as a new entity.
It starts to matters in drawing order when there are multiple entities with the same drawing order and that after save/reload. Entities with the same drawing order then receive a new drawing order based on the original but sequentially increasing based on handle.
Because a Hatch is recreated with a newer/higher handle each time a property changes it will thus always end up above the others with the same order even when the original was created earlier.
This is more pronounced when copying/pasting entities from a source to a target drawing. The original Hatch drawing order is retained but it will always be above existent entities with the same drawing order in the target drawing after save/reload.
Most other entities are probably just updated in situ. It is unsure to me at this point if merely updating a Hatch is even possible. And perhaps this is related to the addObject ForceNew flag what is false by default.
Regards, CVH
|
|
728 | QCAD (main) | Performance Issue | Low | Slow loading of drawing with many block inserts | Assigned | |
1 |
Task Description
Slow loading of drawing with huge number of block inserts (more than 10000).
|
|
1469 | QCAD (main) | Suggestion | Low | Cartouche automatique | Assigned | |
1 |
Task Description
Would not it be possible to create a kind of template for printing? We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).
Original suggestion:
Bonjour,
Ne serait il pas possible de créer une sorte de template lors de l’impression ? On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).
|
|
1526 | QCAD (main) | Suggestion | Low | Exporting block attributes to CSV | Assigned | |
1 |
Task Description
Two useful commands make it necessary to
1-”delete all the history of the command lines without terminating QCad” ; and
2-”export attributes to the CSV file as exported to the Blocks List”
|
|
1789 | QCAD (main) | Suggestion | Low | Application Preferences / General / Performance :0 | Assigned | |
1 |
Task Description
Hi Andrew,
we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.
I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.
Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.
Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.
Just my two cents. ;)
|
|
2138 | QCAD (main) | Suggestion | Very Low | Block zoomstate supersedes Model_Space after Undo of BC | Assigned | |
1 |
Task Description
Summary: Block zoomstate supersedes Model_Space after Undo of BC
QCAD Professional Version: 3.25.2.1 (3.25.2.1) Internet: QCAD.org Build Date: Oct 15 2020 Revision: 2895712 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown «< (Win installer 32 bit)
With the file provided: ZW to see the top green ‘revision cloud’ up close QQ Box select around the cloud »> 2 entities in selection BC, select origin somewhere inside the selection, accept proposed naming »> ‘Block 1’ is created from the selection TN BD, select the newly created Block Reference »> Auto zoom of ‘Block 1’ (Intended behavior) OO »> Returns to Model_Space with the zoomstate of the removed Block »> Halfway down the drawing »> The former zoomstate of the Model_Space is lost
Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378
This proves they do, even if the block doesn’t exists anymore.
Regards, CVH
PS: 3th trial to enter a suggestion ...
|
|
2140 | QCAD (main) | Suggestion | Low | Changing navigation mode for mouse wheel doesn't change... | Assigned | |
1 |
Task Description
Looks like error, but may be that’s feature request.
CAD software uses typical navigation behavior as: Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.
Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior: Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.
Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.
QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel. Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!
Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.
|
|
2146 | QCAD (main) | Suggestion | Very Low | Keep 'Invisible' objects invisible while saving | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882 Explanation found in REntity.cpp Listed as a Public Member Functions inherited from RObject
Regards, CVH
|
|
2147 | QCAD (main) | Suggestion | Very Low | Allow breaking up self-intersecting a 2e time (at endpo... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can cut (DI) once. Cutting the second segment results in NO cut.
Regards CVH
|
|
2148 | QCAD (main) | Suggestion | Very Low | Allow undo after breaking up self-intersecting with D2 ... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can break out segment (D2): - removing one of the loops with the ‘remove’ option. - leaving both without the ‘remove’ option. Bug? Without the ‘remove’ option it can’t be undone.
Regards CVH
|
|
2149 | QCAD (main) | Suggestion | Very Low | Allow undo after auto trim self-intersecting with AX in... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can auto trim (AX): - The lower loop. - The top loop. Bug? The action on the top loop can’t be undone.
Regards CVH
|
|
2162 | QCAD (main) | Suggestion | Low | Update the parameter with simplify of RPolylineData & R... | Assigned | |
1 |
Task Description
Unrelated to OS, nor version
Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372
Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated. The Classes still refer to an ‘angleTolerance’.
Regards, CVH
|
|
2177 | Documentation | Suggestion | Low | Update class_r_polyline.html | Assigned | |
1 |
Task Description
Include RPolyline.getLeftRightOutline() method in class_r_polyline.html
In use since 11 Sept 2020
CVH
|
|
2181 | QCAD (main) | Suggestion | Very Low | Apply more distinguishable Enabled and Disabled state i... | Assigned | |
1 |
Task Description
QCAD Professional Win7 WinInstaller 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related forum Topic: https://qcad.org/rsforum/viewtopic.php?t=8015
CVH
|
|
2216 | QCAD (main) | Suggestion | Low | DIM modification cause overlapping text | Assigned | |
1 |
Task Description
When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.
|
|
2371 | QCAD (main) | Suggestion | Low | Include more properties for polylines in the Selection ... | Assigned | |
1 |
Task Description
Andrew,
Not OS or Version depending.
We can’t filter on some specific properties of polylines.
Handy would be: - Global Width - Orientation
Specific: - Polyline Pattern But I don’t really search for them ... For some post-op I just need them all to be set to ‘No’. - # of vertices Filtering the complex from the more simple ones. - Including Bulges or not To seperate polylines with arc segments form others. There some operations that don’t really work with bulging. - Z values and/or global Z This would make sense for some but filtering on Z is not common under QCAD as it is 2D.
Regards, CVH
|
|
2541 | QCAD (main) | Suggestion | Very Low | Consider the unit "Microinch" to be non-metric | Assigned | |
1 |
Task Description
Andrew,
One Microinch is equivalent to 25.4 nanometers and I don’t consider that to be metric.
RUnit.isMetric(this.getDocument().getUnit()) returns true for RS.Microinch or value 8.
https://github.com/qcad/qcad/blob/master/src/core/RUnit.cpp#L145-L155 Returns false for: RS::Inch ; RS::Foot ; RS::Mile ; RS::Mil ; RS::Yard ... and true for all the rest.
Also see last note in: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=9506&p=38295
Not to be confused with RDocument::isMetric() because that returns the measurement system unless that is RS::UnknownMeasurement what is rather impossible with drawings created by QCAD.
Regards, CVH
|
|
498 | QCAD (main) | Bug Report | Low | issue importing from Autocad | Assigned | |
|
Task Description
There is an issue importing from Autocad: lines and quotes (both arrows and text) appear too much big (see attachment). I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick. Autocad’s dxf are opened with right line thickness but wrong quotes. Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.
|
|
513 | Translation | Bug Report | Low | Translation errors | Assigned | |
|
Task Description
If you spot an error in the translated user interface of QCAD, please add a comment to this task or submit your translation at http://translate.qcad.org. Thank you for your help!
Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu oder geben Sie Ihre Übersetzung ein unter http://translate.qcad.org. Vielen Dank für Ihre Hilfe!
Si vous remarquez une erreur dans l’interface utilisateur traduite de QCAD, veuillez ajouter un commentaire à cette tâche ou soumettre votre traduction à http://translate.qcad.org. Merci pour votre aide!
Si detecta un error en la interfaz de usuario traducida de QCAD, añada un comentario a esta tarea o envíe su traducción a http://translate.qcad.org. Gracias por tu ayuda!
Se si rileva un errore nell’interfaccia utente tradotta di QCAD, si prega di aggiungere un commento a questo compito o di inviare la traduzione a http://translate.qcad.org. Obrigado por sua ajuda!
Se você detectar um erro na interface de usuário traduzida do QCAD, adicione um comentário a esta tarefa ou envie sua tradução para http://translate.qcad.org. Obrigado pela sua ajuda!
Als u een fout ziet in de vertaalde gebruikersinterface van QCAD, voeg dan een opmerking toe aan deze taak of stuur uw vertaling naar http://translate.qcad.org. Bedankt voor uw hulp!
|
|
523 | QCAD (main) | Bug Report | Low | Selection tool button in CAD tool bar shows line tools ... | Assigned | |
|
Task Description
The selection tool is not accessible:
Click on Selection Tool icon - left panel:
Left panel then shows line tool options.
Click “back” button at top of left panel:
Left panel then shows selection options.
Click an option icon:
Left panel then shows line tool options again.
|
|
641 | QCAD (main) | Bug Report | Low | No warning is displayed when lengthen tool is used with... | Assigned | |
|
Task Description
Command ‘Lengthen LE’ will extend most arcs but not all (2 arcs in the attached drawing do not work)! There is no obvious reason for this from the users point of view.
|
|
645 | QCAD (main) | Bug Report | Low | Inch - Layerdata / Linewight still in mm ... | Assigned | |
|
Task Description
Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....
I like it ... but maybe I’m the only one
|
|
665 | QCAD (main) | Bug Report | Low | Possible printing error on Linux fedora 16? | Assigned | |
|
Task Description
On behalf of et76 Possible printing error using Linux 16 - needs further testing! Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119
Au nom de et76 Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests! S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119
|
|
700 | QCAD (main) | Bug Report | Low | Saved 'hatched' block loses hatching when using isometr... | Assigned | |
|
Task Description
Hatched block loses hatching when using isometric projection tool: See -http://www.qcad.org/rsforum/viewtopic.php?f=32&p=7063#p7063
When manipulating a saved hatched block with the isometric tool it loses the hatching unless the block is exploded.
Is this normal behaviour here? or a bug?
|
|
705 | QCAD (main) | Bug Report | Low | Verwaltung Library Resourcen und Favoriten .... | Assigned | |
|
Task Description
Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....
Hier meine Gedanken ....
In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.
Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.
Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.
Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!
OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”: QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!
Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.
|
|
714 | QCAD (main) | Bug Report | Low | Isometric view tool bar doesn`t remain ' docked'. | Assigned | |
|
Task Description
Win 7 - 64 Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.
|
|
721 | QCAD (main) | Bug Report | Low | Vertical dimensions imported as horizontal dimensions | Assigned | |
|
Task Description
Vertical dimensions created with 3rd party applications are sometimes imported as horizontal dimensions with length 0. Changing the angle in the property editor fixes the problem. Problem occurs in QCAD 2.2 and QCAD 3.0.
|
|
729 | QCAD (main) | Bug Report | Low | Preferences not stored on some installations | Assigned | |
|
Task Description
Preferences not stored on some installations
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&view=unread#unread
|
|
733 | QCAD (main) | Bug Report | Low | QCAD Trial: batch tool dwg2bmp produces no output | Assigned | |
|
Task Description
Some users are experiencing problems with dwg2bmp.
See forum at: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2272&view=unread#unread
|
|
736 | QCAD (main) | Bug Report | Low | snap tool menu is shown before specifiv tool menu | Assigned | |
|
Task Description
When creating a new file, selecting the e. g. line tool at first opens the linemenu and the snap tool menu as expected. After clicking on the back button twice (going back to the main menu) and selecting the e. g. circle menu, the snap tool menu is shown instead of the circle menu. Instead the circle menu is shown after pressing the back button again.
This only happens when clicking on the back button, but with any tool menu seleected. Pressing escape to go back does not show this problem.
QCAD is running on Mac OS Mountain Lion.
|
|
754 | QCAD (main) | Bug Report | Low | Adding or removing additional viewports - gives unwante... | Assigned | |
|
Task Description
Windows 7-64 3.0.7 When adding or removing additional viewports,an extra unnecessary window of the viewport is created.
|
|
893 | QCAD (main) | Bug Report | Low | Library Browser - Edit Library Item - opens drawings al... | Assigned | |
|
Task Description
Library Browser - Edit Library Item - opens drawings always with grid.
- If I switch between opened drawings back and forth the grid will disappear .... - If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....
Just Cosmetic ...
|
|
948 | QCAD (main) | Bug Report | Low | mainwindow example segfaults | Assigned | |
|
Task Description
As far as I can tell, it never worked.
#0 0x0000000000490527 in QFormInternal::domPropertyToVariant ()
No symbol table info available.
#1 0x000000000042aea9 in QFormInternal::QAbstractFormBuilder::toVariant ()
No symbol table info available.
#2 0x00000000004498a6 in QFormInternal::QFormBuilder::applyProperties ()
No symbol table info available.
#3 0x000000000042475f in QFormInternal::FormBuilderPrivate::applyProperties ()
No symbol table info available.
#4 0x000000000042e83b in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#5 0x00000000004493c0 in QFormInternal::QFormBuilder::create ()
No symbol table info available.
#6 0x000000000042182e in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#7 0x000000000042fa37 in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#8 0x00000000004225a2 in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#9 0x0000000815eed3d7 in QFormInternal::QAbstractFormBuilder::load ()
from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#10 0x0000000815ededad in QUiLoader::load () from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#11 0x0000000815eda326 in qtscript_QUiLoader_prototype_call (context=0x813262240)
at ../../generated_cpp/com_trolltech_qt_uitools/qtscript_QUiLoader.cpp:282
_q_arg0 = (QIODevice *) 0x813fe5610
_q_arg1 = (QWidget *) 0x813ffdcd0
_q_result = (QWidget *) 0x8006e2c00
_id = <value optimized out>
_q_self = (QUiLoader *) 0x813f08d40
#12 0x0000000805fc9f78 in QScript::FunctionWrapper::proxyCall () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#13 0x0000000805ee418f in QTJSC::NativeFuncWrapper::operator() () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#14 0x0000000805eb93ee in QTJSC::Interpreter::privateExecute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#15 0x0000000805ec1ccd in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#16 0x0000000805ec1ff9 in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#17 0x0000000805fa9743 in QScriptEnginePrivate::evaluateHelper () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#18 0x0000000805faabc6 in QScriptEngine::evaluate () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#19 0x0000000800ac5aae in RScriptHandlerEcma::eval (this=0x811f435e0, script=<value optimized out>,
fileName=<value optimized out>) at RScriptHandlerEcma.cpp:855
err = {d_ptr = {d = 0x7fffffffcf50}}
#20 0x0000000800ac65c5 in RScriptHandlerEcma::doScript (this=0x811f435e0, scriptFile=@0x7fffffffd2f0,
arguments=<value optimized out>) at RScriptHandlerEcma.cpp:851
fi = {d_ptr = {d = 0x813f94700}}
globalObject = {d_ptr = {d = 0x813ff1240}}
contents = {static null = {<No data fields>}, static shared_null = {ref = {_q_value = 3936}, alloc = 0, size = 0,
data = 0x809bb387a, clean = 0, simpletext = 0, righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}},
static shared_empty = {ref = {_q_value = 19}, alloc = 0, size = 0, data = 0x809bb389a, clean = 0, simpletext = 0,
righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}}, d = 0x811c11800, static codecForCStrings = 0x0}
#21 0x0000000000417d13 in MainWindow (this=0x7fffffffd4b0, parent=<value optimized out>) at MainWindow.cpp:99
No locals.
#22 0x0000000000416ad9 in main (argc=1, argv=<value optimized out>) at main.cpp:35
app = <value optimized out>
window = {<QMainWindow> = {<QWidget> = {<QObject> = {_vptr$QObject = 0x4992b0, static staticMetaObject = {d = {
superdata = 0x0, stringdata = 0x809933ae0 "QObject", data = 0x809933b80, extradata = 0x809ba94c0}},
static staticMetaObjectExtraData = {objects = 0x0,
static_metacall = 0x80985cd80 <QObject::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}, d_ptr = {
d = 0x811d28600}, static staticQtMetaObject = {d = {superdata = 0x0, stringdata = 0x80993cc40 "Qt",
data = 0x809940560, extradata = 0x0}}}, <QPaintDevice> = {_vptr$QPaintDevice = 0x499478, painters = 0},
static staticMetaObject = {d = {superdata = 0x809ba94e0, stringdata = 0x808e66be0 "QWidget", data = 0x808e670c0,
extradata = 0x809282360}}, static staticMetaObjectExtraData = {objects = 0x0,
static_metacall = 0x8087899a0 <QWidget::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>},
data = 0x811d28748}, static staticMetaObject = {d = {superdata = 0x809282380, stringdata = 0x808ec04c0 "QMainWindow",
data = 0x808ec0660, extradata = 0x8092abc60}}, static staticMetaObjectExtraData = {objects = 0x8092d1880,
static_metacall = 0x808e5aaf0 <QMainWindow::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}},
documentInterface = 0x811d31600}
ret = <value optimized out>
|
|
976 | dxflib | Bug Report | Low | DXF import errors related to hatches, texts | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677
|