QCAD Bugtracker

When working with several files is normal also to work in several folders, this can be confusing, expecially in the case where there are different folders with equal file names.
I propose the creation of a “Open file location”. This, probably under the main menu, “File”, when clicked would open the standard
“file explorer” with the folder that contains the current file already selected.
It would be quite similar to the windows 8/10 “Open file location”.

Win7pro 32bit Qcad 3.23.0

Andrew,
The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.

In the attached drawing setting the Global Z of the inner poly to 5,10,...

The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly.
It also affects the projected widths of the line inversely, but not by changing the widths properties.

Pritty rare combination! True.
Qcad is 2D native! True.

Flatten will resolve this.

It is not a purely visual rendering fault, the poly will explode as such.

Maybe similar flaw as with uneven scaling blocks with arcs.
https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703

Regards

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Most likely not related to the QCAD version, rather an old sore.

File included
Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803
Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’

Polyline arcs with Width = 2R render as circle segments rather than circle sectors.
As Non-reversed arcs these don’t explode.
As reversed arc these explode to a single arc rather than a circle sector contour.

There is also still the faulty rendering with Z not zero
https://qcad.org/bugtracker/index.php?do=details&task_id=1923

Regards,
CVH

It would be very useful to have an extra option to only detect duplicates within a user defined area.

When working with the isometric grid (in any projection - Top, Right, Left) and drawing from ‘scratch’ as it were, without using the projection tools - I find myself using ‘Line from Angle’ the most.

It would be extreamly useful to be presented with two extra buttons when using this tool, a 30 degree button and a -30 degree button, this way I wouldn’t need to keep typing in the angle difference here.

Regards

Clive

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

Hello
It would be great when you can add a function to export a selected object as a list of points.
Is it possible to add?

Autodes DWG TrueView 2017 has this function and it is very useful.
Here you can see a screenshot of this function.

See:
https://www.qcad.org/rsforum/viewtopic.php?t=6650

Modify the “purge layer” tool to preserve empty layers with a locked status.
see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386

It would be extreamly useful to have an option to either use - or not use leader lines in the standard horizontal/vertical dimension line tools, some of the drawings I’m working on need the ‘standard’ looking dimensions with leader lines and some don’t. its a real pain to have to select - explode and delete all the leaders I don’t need.

Hoping for an option

Regards

Clive

Add a command line switch to dwg2pdf to export a given block instead of “*Model_Space”.

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Origin:
I like to start my CAM paths at low curvature instead starting at high curvature.
Ellipses may explode with the startpoint at the tip. (file Y2)

Documented in 3.25.2.4, reproducible under 3.25.2.7

File included with 4 LayerStates
- Original Ellipses: Y1
- Exploded to polylines (32 segments): Y2
- Direct after XP, OR performs different on the left top one: Y3
- Faulty solutions by OR: Y4 (= saved state)

The results may differ with the saved explosions.

With the file.
Y1
TA
XP
Relocate startpoint with OR to an existing reference (called ‘End’)

Regards,
CVH

QCAD Professional
Win installer 32
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Discovered in 3.25.2.4, reproducible under 3.25.2.7

Draw any open or closed chain of line entities.
Select All.
OC to Polyline.
Step through vertices.

No example file provided because these NaN values are not saved to a file.
More pronounced with lines as with arcs.
Less pronounced when recombining after an explosion.
Some methods clear these to value = void.
Some methods clear these to zero (OR).
Can also occur when adding segments to an existing polyline with OC.

Regards,
CVH

See:
http://www.youtube.com/watch?v=27bCgg3zLVA

It would be useful to have an additional option to be able to count/add up consecutive distances measured with this tool ;)

XP/32

Go to:
Text → Special Characters → Others → “Character Map” pops up.
Adjust Zoom to 100% = display problem (not enough space for the single character.

A ‘non -filled’ arrowhead would be good to have also.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408

When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.

Different dimensions font sizes in the same drawing.

So far, layer status has only been implemented very rudimentarily.
I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.

Hi,

With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.

It would be useful to have an additional option to only detect duplicates on user defined selection of drawing.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145

Add the option to use a fixed path for the save to, open and CAM export directories.

(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)

There is the Synchronize attributes feature which works well. But It affects only block references in the active layout(modelspace, block layout). If I want to synchronize attributes of block references in in another blocks, i have to manually go through all blocks and run synchronize attributes feature. That is the reason I would like to modify Synchronize attributes feature to affect all block references in a drawing, or add new Deep synchronize attributes feature.

It may be useful to insert the “image cropping” function both in top / bottom - right / left mode, and with polyline

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Documented in 3.25.2.4, reproducible under 3.25.2.7
In the attached file:
→ Explode the trial cases and locate NaN Widths.
→ These faulty widths are cleared while saving and reverting.
= work around.

Related Post: https://www.qcad.org/rsforum/viewtopic.php?t=7902#p30902
Related Topic: https://www.qcad.org/rsforum/viewtopic.php?t=7901
Related Commit: https://github.com/qcad/qcad/commit/fcd7929bced7ae328029c1aa2ee2aff2745709c6

Arctic_Eddie reports failing CAM offset at exactly these points !!!
Reported is a faulty arc with radius of over 360,000mm.
- I can not reproduce this under QCAD working further on the Polys with NaNs.
- However the direct offset of such controlpoint Splines is erroneous.
(see file in post 30902)

Arctic_Eddie reports arc radii of over 10,000mm.
- These don’t seem to be faulty.
- I agree that BiArc fitting should be bound to a lower and certainly to an upper limit.
- That should be huge otherwise faint curvature is represented by many
wobbles or too quick by straight lines.
(All this, keeping in mind that QCAD doesn’t return the optimum fitted BiArc, see: https://www.qcad.org/rsforum/viewtopic.php?t=4859)

Regards,
CVH

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

QCAD/CAM
Trial package Win installer 32 bit
Version: 3.25.2.0 (3.25.2)
Internet: QCAD.org
Build Date: Sep 4 2020
Revision: 4a61501
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Local decimal separator is ‘,’ (comma)
In CAM configuration .. Z Levels .. Safety level

Using nn,nnn the output is Nxx G0 Znn
Using nn.nnn the output is Nxx G0 Znn.nnn

Drop down boxes are all in dot format.
Didn’t try anything else yet

Regards,
CVH

Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?

related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

Looks like error, but may be that’s feature request.

CAD software uses typical navigation behavior as:
Wheel = Zoom; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right.

Any other software like browsers, office software (openoffice writer, ms excel and so on), 2d paint software like GIMP (Photoshop and so on) uses other behavior:
Wheel = Scroll up/down; Ctrl+Wheel = Zoom; Shift+Wheel = Scroll left/right.

Users, that intensively use CAD and other software simultaneously prefer to make same behavior in their applications switching CAD scroll to plain mouse wheel.

QCAD’s “Application Preferences”: “Graphics View: Navigation”: “Mouse wheel/ two finger swipe”: “Scroll” allow user to assign scroll up/down to wheel mouse instead of Zoom. But there is mistake Ctrl+Wheel didn’t change to Zoom. Ctrl+Wheel continues to scroll up/down, as the wheel.
Wheel = Scroll up/down; Ctrl+Wheel = Scroll up/down; Shift+Wheel = Scroll left/right. No zoom!

Draw manipulation at this mode like a hell: you need to use wheel in conjunction with Ctrl/Shift to point draw in desired position, than move your hand to +(-) for make desired zoom.

Changeable color of the selection bar in the layer list.
Now the color of the bar is darkblue and the underlaid icons are black and are not readable.

Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window.
See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?

(Feature request sounds a little harsh, enhancement proposal would seem more apt.)

Summary: Block zoomstate supersedes Model_Space after Undo of BC

QCAD Professional
Version: 3.25.2.1 (3.25.2.1)
Internet: QCAD.org
Build Date: Oct 15 2020
Revision: 2895712
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown «< (Win installer 32 bit)

With the file provided:
ZW to see the top green ‘revision cloud’ up close
QQ
Box select around the cloud
»> 2 entities in selection
BC, select origin somewhere inside the selection, accept proposed naming
»> ‘Block 1’ is created from the selection
TN
BD, select the newly created Block Reference
»> Auto zoom of ‘Block 1’ (Intended behavior)
OO
»> Returns to Model_Space with the zoomstate of the removed Block
»> Halfway down the drawing
»> The former zoomstate of the Model_Space is lost

Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix
See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378

This proves they do, even if the block doesn’t exists anymore.

Regards,
CVH

PS: 3th trial to enter a suggestion ...

It would be a very interesting feature to add to future versions.

I also use AutoCAD Mechanical 2012 and the BOM is synced with every balloon on the drawing. Making it easy to edit.

The core BOM accepts formula fields and we can easily calculate the mass of a part, with some Ifs and math.

The BOM that is shown in the actual drawing is more simplistic, and has just Part number, Quantity, Mass and the Description. But it’s related to the “core BOM”.

It’s a very interesting thing! It would be great on QCad.

it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.

Case:

Select a block array,
put it with “Copy with reference” or “Cut with reference” into the clipboard,
choose a reference point which isn’t in the center of the array,
use the paste tool / with option “flip pasted entities”

If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point.
If I try to flip in both directions at the same time - you can’t see this effect.

Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances

QCAD Professional
Win7 WinInstaller 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related forum Topic:
https://qcad.org/rsforum/viewtopic.php?t=8015

CVH

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

Add support for alternate units for dimension style, for example to display units in mm and in.

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown

Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can break out segment (D2):
- removing one of the loops with the ‘remove’ option.
- leaving both without the ‘remove’ option.
Bug?
Without the ‘remove’ option it can’t be undone.

Regards
CVH

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown

Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can auto trim (AX):
- The lower loop.
- The top loop.
Bug?
The action on the top loop can’t be undone.

Regards
CVH

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

QCAD Professional
win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version:5.13.2
Architecture: i386
Compiler: Unknown

Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757
Splitting the old report up ...
Same file.
In the left example one can cut (DI) once.
Cutting the second segment results in NO cut.

Regards
CVH