|
681 | QCAD (main) | Feature Request | Low | 'Plug-in' for Gear generator | Assigned | |
2 |
Task Description
Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc... To produce 2D templates for all sorts of projects.
|
|
687 | QCAD (main) | Feature Request | Low | Plot Stamp option | Assigned | |
2 |
Task Description
To add a Plot Stamp option for printing, to have options to print file name, date , time etc...
See topic:http://www.qcad.org/rsforum/viewtopic.php?f=32&p=6967&sid=ba06663c8bdaef236272d80ad45ccf5f#p6967
|
|
695 | QCAD (main) | Feature Request | Low | Add more dimension arrow styles (e.g. dots) | Assigned | |
2 |
Task Description
Add more dimension arrow styles (e.g. dots).
See forum thread: http://qcad.org/rsforum/viewtopic.php?f=31&t=2185
|
|
704 | QCAD (main) | Feature Request | Low | Old Hatch Function | Assigned | |
2 |
Task Description
It would be nice to implement the old hatch function as a tile function in parallel with the newer more industry standard hatch function. A tile function that would allow overlap +/- would be even better, and a great productivity boost, almost like an array within a set of bounds.
Thanks, Bob
|
|
720 | QCAD (main) | Feature Request | Low | Locked Blocks .... | Assigned | |
2 |
Task Description
It is nice that I can scale or rotate a block - but right now I see also a big plus in a kind of locking function for Blocks. It would be nice to have a “locked” option ad least for the scaling of blocks.
Example: Think about Clives “Radiator ‘Cover’ screen” http://www.qcad.org/rsforum/viewtopic.php?f=51&t=2060 and how you could manipulate this screen with “scale blocked blocks”
|
|
766 | QCAD (main) | Feature Request | Low | Layer List: Add "Lock All Layers" | Assigned | |
2 |
Task Description
To improve useability/efficiency I would like to propose the following changes/additions to the layer list:
1) Combining the show and hide button into one button.
Clicking once will hide all layers, clicking again will show them all again.
2) A “lock/unlock” button.
Clicking once will lock all layers, clicking again will unlock them all again.
Regarding the icons I suggest that instead of show both the black and grey version of the eye/lock, you could switch between them depending on the state the switch-button is in. Also the mouse-over-text could/should change with the state.
|
|
767 | QCAD (main) | Feature Request | Low | Merging/Combining segments of a straight line into one | Assigned | |
2 |
Task Description
Sometimes you end up with a straight line which is broken/split into several parts. It would be great to have a tool to merge/combine these segments into one.
That would be the opposite/complementary tool to the “Split Entities” tool.
|
|
770 | QCAD (main) | Feature Request | Low | Polyline tool to delete segments between two nodes, lea... | Assigned | |
2 |
Task Description
I guess this is a case of wording and wrong expectations.
The polyline tool “Delete Segments between two nodes” removes nodes, but not segments as the title and the icon suggests.
I propose to rename it to “Delete Nodes between two nodes”.
A tool which actually removes line segments from a polyline, leaving gaps, could indeed be useful to some users.
I think of a straight polyline with several segments. Then I remove some segments. I end up with a polyline with “holes” in it. Now I could stretch that polyline and all the remaining segments and holes stretch proportionally. Could be handy some times.
|
|
776 | QCAD (main) | Feature Request | Low | Extra ' isometric' buttons for using Line from Angle. | Assigned | |
2 |
Task Description
When working with the isometric grid (in any projection - Top, Right, Left) and drawing from ‘scratch’ as it were, without using the projection tools - I find myself using ‘Line from Angle’ the most.
It would be extreamly useful to be presented with two extra buttons when using this tool, a 30 degree button and a -30 degree button, this way I wouldn’t need to keep typing in the angle difference here.
Regards
Clive
|
|
786 | QCAD (main) | Feature Request | Low | Multi - Breakout tool | Assigned | |
2 |
Task Description
A ' Multi ' Breakout tool or added option to the existing Breakout tool.
For example see attached image.
An option to remove all segments within a chosen boundary would be good, in my example I want to remove all the hatching within the Red circle.
So after exploding the Hatch, currently I have to remove all segments singularly!
Of course I could have placed the circle first and hatched around it - but in this and most instances it is easier to design and to produce the Hatching first and then place my circle/shapes etc.
|
|
788 | QCAD (main) | Feature Request | Low | Extra option to detect duplicates only in user defined ... | Assigned | |
2 |
Task Description
It would be very useful to have an extra option to only detect duplicates within a user defined area.
|
|
789 | QCAD (main) | Feature Request | Low | Scale tool - mouse-pointer - inversely proportional sca... | Assigned | |
2 |
Task Description
3.0.8. Bug Report or Feature Request ..... I’m not sure!
If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale. x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...
|
|
853 | QCAD (main) | Feature Request | Low | Keep selection after undo ... | Assigned | |
2 |
Task Description
If I move something and it went wrong I can easily undo the last move and start over without the need of a re-selection. If I copy something and it went wrong I can undo the last copy but I have to re-select everything again.
It would be nice to keep the once chosen selection in both “undo” situation!
Same with similar functions like rotate etc. ....
|
|
894 | QCAD (main) | Feature Request | Low | Modify - Clip to Rectangle: copy area to clipboard | Assigned | |
2 |
Task Description
New mode for clip to rectangle: copy contents of rectangular area to clipboard.
|
|
908 | QCAD (main) | Feature Request | Low | Library Browser Block Delete Function | Assigned | |
2 |
Task Description
It would be very helpful if the library browser had a delete function.
I know that this can be very risky for some people, but it is the easiest way to see clearly what you delete.
Regards Henry
|
|
923 | QCAD (main) | Feature Request | Low | Diagramming (Intelligent Orthogonal Connectors) | Assigned | |
2 |
Task Description
Hi,
With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.
|
|
927 | QCAD (main) | Feature Request | Low | Further options for the 'Add Measurement' tools | Assigned | |
2 |
Task Description
Absolutely love the new options for adding the measurements in the current drawing.
I would like to see an additional option for only adding the text and not the lines also, maybe a simple check box would suffice here.
Of course at the moment I am able to use the property editor to select only the lines and move to a new layer and hide!
|
|
1023 | QCAD (main) | Feature Request | Low | Arrange points on a plan according to variation of dist... | Assigned | |
2 |
Task Description
Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances
|
|
1044 | QCAD (main) | Feature Request | Low | Radian measure symbol for Geometry labeling ... | Assigned | |
2 |
Task Description
We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...
It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.
|
|
1090 | QCAD (main) | Feature Request | Low | Export only selected layers to SVG and/or export each l... | Assigned | |
2 |
Task Description
When exporting to SVG it would be helpful if there was a selection of layers to export. E.g. when selecting only layer A in the SVG export dialog, only the objects located/displayed on layer A would be exported to SVG.
As an alternative or additional export feature, there could be an option to export each (non-empty) layer to a separate SVG in one step. The layer names could be used as (part of the) default file names during the export. E.g. Layer A of file XYZ would be exported to “XYZ_A.SVG” while layer B would be exported to “XYZ_B.SVG” etc.
|
|
1092 | QCAD (main) | Feature Request | Low | New tool: draw trace entities | Assigned | |
2 |
Task Description
Add tool to construct new trace entities. Trace entities can currently only be loaded from DXF/DWG.
|
|
1093 | QCAD (main) | Feature Request | Low | Edit Layer attributes by double-clicking on entry in la... | Assigned | |
2 |
Task Description
When double clicking on an entry in the layer list just nothing happens. I would prefer if this would directly open the layer attributes dialog to change color/name etc.
|
|
1102 | QCAD (main) | Feature Request | Low | Ray reference point | Assigned | |
2 |
Task Description
Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.
It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.
|
|
1107 | QCAD (main) | Feature Request | Low | Splines: add / remove control points of existing spline... | Assigned | |
2 |
Task Description
Tools to add control points to existing splines and remove control points.
|
|
1127 | QCAD (main) | Feature Request | Low | Leaders: spline shaped | Likely to be implemented | |
2 |
Task Description
Add support for spline shaped leaders
|
|
1128 | QCAD (main) | Feature Request | Low | Text: automatically wrap text at text box width | Assigned | |
2 |
Task Description
Add support for automatic text line wrapping for multiline text entities.
|
|
1131 | QCAD (main) | Feature Request | Low | Use different units for construction and dimensions | Assigned | |
2 |
Task Description
E.g. use Millimeters for construction while dimensions are displayed in Meters.
|
|
1159 | QCAD (main) | Feature Request | Low | Add preference for button option instead of drop down m... | Assigned | |
2 |
Task Description
For some tools like the Horizontal or vertical line, it would be good to have button options (similar to infinite and ray line buttons) instead of the drop down menus.
|
|
1185 | QCAD (main) | Feature Request | Low | Importing Tables (CSV) | Assigned | |
2 |
Task Description
Import tables in CSV format and display them in the drawing as lines and text.
|
|
1285 | QCAD (main) | Feature Request | Low | Property Painter | Researching | |
2 |
Task Description
Easy transfer of properties from one entity to others
|
|
1337 | QCAD (main) | Feature Request | Low | Alternate units for dimensions | Assigned | |
2 |
Task Description
Add support for alternate units for dimension style, for example to display units in mm and in.
|
|
1356 | QCAD (main) | Feature Request | Low | Option to lengthen/Shorten from both ends of entity at ... | Assigned | |
2 |
Task Description
It would be helpful to have the added option to lengthen/Shorten from both ends of entity at the same time.
|
|
1364 | QCAD (main) | Feature Request | Low | New Tool -'Run Parallel with' | Assigned | |
2 |
Task Description
New Tool request:
When drawing a line it would be good to have a tool/option to ‘run parallel with’.
For example start to draw a line and choose ‘run parallel with’, select appropriate line to draw parallel with!
|
|
1372 | QCAD (main) | Feature Request | Low | Distance Point to Point - option for 'added' distances | Assigned | |
2 |
Task Description
It would be useful to have an additional option to be able to count/add up consecutive distances measured with this tool ;)
|
|
1446 | QCAD (main) | Feature Request | Low | New Polygon tool | Assigned | |
2 |
Task Description
Hi,
if I need to design a bolt circle (circle on circle) and the single bolt diameter and the quantity of circles are given then I can use the QCAD Polygon Tool “Polygon 2 Points of Side” ... but for the Length of the side I have to do a workaround (Line with this length) to determine the desired length.
It would be very convenient to have an additional tool for a Polygon which has the possibility to ask me for the center, corners and the length of the sides.
|
|
1471 | QCAD (main) | Feature Request | Low | File > Open file location | Assigned | |
2 |
Task Description
When working with several files is normal also to work in several folders, this can be confusing, expecially in the case where there are different folders with equal file names. I propose the creation of a “Open file location”. This, probably under the main menu, “File”, when clicked would open the standard “file explorer” with the folder that contains the current file already selected. It would be quite similar to the windows 8/10 “Open file location”.
|
|
1473 | QCAD (main) | Feature Request | Low | "Partial" circular/radial dimensions | Assigned | |
2 |
Task Description
This is kind of related to FS#952, or rather a superset of it.
Consider the situation in the attached image. There is a perfectly good, albeit really shallow arc, making the radius somewhere in the vicinity of 600 millimeters, and the radial dimension being drawn accordingly.
Considering the other dimensions of the part, this is completely unusable, even to work with, really, but definitely so when it needs to be put on paper.
It would be nice to have some sort of “partial” (for my lack of a better word) radial/diametric dimensions where the dimension length can be adjusted.
Considering that this can be done with Leader, maybe a better (more generic) solution would be for Leader type dimensions to have options so they could automatically generate labels for various dimensions of a selected entity – sort of like having the Prefix/Tolerance/Scale options the other dimensions have, and have some additional fields there for selected entity and maybe dimension type (for example, radial or diametric for an arc-type entity).
|
|
1489 | QCAD (main) | Feature Request | Low | Edit > Drawing Preferences > Dimensions: Add option to ... | Assigned | |
2 |
Task Description
It would be extreamly useful to have an option to either use - or not use leader lines in the standard horizontal/vertical dimension line tools, some of the drawings I’m working on need the ‘standard’ looking dimensions with leader lines and some don’t. its a real pain to have to select - explode and delete all the leaders I don’t need.
Hoping for an option
Regards
Clive
|
|
1502 | QCAD (main) | Feature Request | Low | Info tool / Setting for Font and Size ... | Assigned | |
2 |
Task Description
It would be nice if the Info Tool / Add Measurement to drawing option would use the same settings like the “Dimension settings” for Font and Text height. It’s a kind of similar function in a drawing and should have the same style. Maybe with an on/off switch?
|
|
1552 | QCAD (main) | Feature Request | Low | Layers: assign different color for printing | Assigned | |
2 |
Task Description
Original request:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4768
|
|
1567 | QCAD (main) | Feature Request | Low | Add support for separate window | Assigned | |
2 |
Task Description
Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already. That would help a lot when working on multiple files and copying blocks between.
|
|
1663 | QCAD (main) | Feature Request | Low | Feature Request: Export Layers as New Drawing | Assigned | |
2 |
Task Description
Hi!
in many tasks in qcad I ended up exporting one or several layers into individual files for some cnc jobs or further processing. So the steps I usually do are:
select all elements on the layer
paste into new drawing
sometimes rename layer names or attributes
adjust dimension settings
save and give name for drawing
Sometimes I have up to 100 layers I need to export like this, so an automatic export for all would be time saving too. But very often a “single click” export method would also help a lot. (e.g. inside the layer list an entry in the right click menue like “save as new file”). Also a multiple selection would be handy if more that one layer should end up in the new file. (e.g. select the three layers that need to be in the new document, then right click and save as new file). Maybe this is too much of changes needed inside the layer list - so something like a separate layer export dialogue would make sense.
When exporting many layers some variables for automatic naming of layers and filename would make sense e.g. user can specify basename_%L.dxf to get the basename_layername.dxf or just an increasing number.
For layers and attributes it is often needed to give a layer a certain name or color for different cnc processes (e.g. engraving and cutting for lasers) or to put everything on layer “0” because of some old CAM software that only supports content on layer 0.
probably many more details would make sense that I didn’t think of yet...
kind regards Martin
|
|
1811 | QCAD (main) | Feature Request | Low | Zoom 1:1 | Assigned | |
2 |
Task Description
It would be nice to be able to adjust the zoom factor so that the scale on the screen matches a ruler which I lay on the screen.
Thanks!
|
|
1886 | QCAD (main) | Feature Request | Low | Support advanced tolerance settings for dimensions | Assigned | |
2 |
Task Description
Add support for - tolerance display (dimtol) - upper limit (dimtp) - lower limit (dimtm) - tolerance precision (dimtdec) - tolerance text size factor (dimtfac) - tolerance suppress zeros, etc.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269
|
|
1887 | dwg2bmp | Feature Request | Low | Add "-max-lineweight" option for dwg2bmp | Assigned | |
2 |
Task Description
Hi there,
A friendly request to add the option to set a maximum lineweight for raster conversions via dwg2bmp.
Depending on the LW configuration of the CAD file, rasterization operations sometimes yield terrible results (see attachment). This would also mirror the similar “-min-lineweight” options available on “dwg2svg” and “dwg2pdf” (although not on “dwg2bmp”).
See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=6298
Thanks!
|
|
2057 | QCAD (main) | Feature Request | Low | Multiline tool | Assigned | |
2 |
Task Description
Implement a multiline tool.
|
|
2063 | QCAD (main) | Performance Issue | Low | Bad performance while zooming inside layout block with ... | Assigned | |
2 |
Task Description
Zooming in and out is lagging to the point of unusable. This is happening in a layout block with the cursor pointing inside geometry with hatches. When the cursor is pointing outside the geometry zooming works as expected. The attached file has a very simplified testcase that shows this problem almost in the same way as a more complex drawing with multiple layers and hatches.
edit: I also attached the more complex drawing because it is a bit unclear to me where the lagging stops. Outside the viewport or outside the paper.
I just noticed the selection box has the same problem!
|
|
2091 | QCAD (main) | Feature Request | Low | Toggle redrawing of hatches | Assigned | |
2 |
Task Description
Because modifying hatches have lag issues I’d like to propose a toggle that turns of the redrawing/rendering of the hatch. Especially while modifying the hatch.
The hatches always have a boundary that can be worked with right? So when we move or stretch the hatch we can still see the boundary and its handles to perform all the actions.
This could be a new view mode that turns of the view of the interior/pattern of the hatch but leave the boundary of the hatch. Or the draft mode can be extended to include simplified hatches while modifying.
Also see the discussion
|
|
2127 | QCAD (main) | Feature Request | Low | Snap for predicted intersections while using "Restrict ... | Assigned | |
2 |
Task Description
I would like to request a new kind of snap: a “Restricted Intersection” snap that appears at the point where an entity would intersect with a line drawn from Relative Zero that fulfills the current EL criteria. “Restricted Intersection” snaps would be similar to other Relative Zero-based snaps (like “Perpendicular” and “Tangential”), but would predict the point of the snap from the EL constraints instead of the characteristics of the entity being snapped to. Naturally a value of 0 for angle or length would result in that constraint being ignored.
Additional operational flexibility could be achieved by allowing the snap to exist regardless of whether EL is actually in use. To be useful this would probably require determining snap locations based on angle OR length as opposed to angle AND length.
Implementing this new snap would allow, for example, for easily drawing a line of unknown (but determinable) length at a specified angle between a given point and a given entity (see discussion here), with the “Restricted Intersection” snap ensuring that the endpoint of the new line forms an intersection with the entity in question. Currently the same goal can be achieved a couple of different ways, but they all involve at least two separate steps.
|
|
2164 | QCAD/CAM | Feature Request | Low | Add ability to pan the 3D view with a modifier key and ... | Assigned | |
2 |
Task Description
With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.
|