|
894 | QCAD (main) | Feature Request | Low | Modify - Clip to Rectangle: copy area to clipboard | Assigned | |
1 |
Task Description
New mode for clip to rectangle: copy contents of rectangular area to clipboard.
|
|
1262 | QCAD (main) | Feature Request | Low | Missing some kind of "QCAD is still working" indicator. | Assigned | |
|
Task Description
If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...
It would be nice to have some kind of visual info that QCAD is working.
|
|
767 | QCAD (main) | Feature Request | Low | Merging/Combining segments of a straight line into one | Assigned | |
2 |
Task Description
Sometimes you end up with a straight line which is broken/split into several parts. It would be great to have a tool to merge/combine these segments into one.
That would be the opposite/complementary tool to the “Split Entities” tool.
|
|
836 | QCAD (main) | Feature Request | Low | Merge different Offset tools into just two | Assigned | |
|
Task Description
Merge Parallel Line(with distance), Concentric Arc(with distance), Concentric Circle(with distance) and Offset(Polyline) into one generic Offset with distance tool that if possible also works for ellipses and splines.
Do the same for the “through point” tools so that there also is just one Offset through point tool.
The Offset tools could be located with the Modification tools.
|
|
1982 | QCAD (main) | Feature Request | Low | measure DIN 1356 | Assigned | |
|
Task Description
To measure in the format DIN 1356 , Architect It is hard work to do this manual input with meta characters.
|
|
604 | QCAD (main) | Feature Request | Low | Measure and record X,Y coordinates tool - add to info ... | Assigned | |
|
Task Description
Feature request See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015
Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.
|
|
1371 | QCAD (main) | Feature Request | Low | Matrix - Modify, missing Flip Horizonatal and Vertical ... | Assigned | |
|
Task Description
Matrix - Modify, add Flip Horizonatal and Vertical tools
|
|
1005 | QCAD (main) | Feature Request | Low | Making use of mouse buttons configurable | Assigned | |
|
Task Description
According to the help, one requires a middle mouse to pan. Since few standard mice have middle buttons, this is a poor choice for this all important function. The default should be the right mouse button when ever the mouse is placed in an open area with nothing else to select. That way right click can still be used to invoke a pop down menu when ever the mouse is placed over an object that might have a need for pop down menu options. Additionally, the Pan mouse key should be alterable and selectable from a Preferences option, since if one does have a three button mouse, we should not prevent a user from employing this hardware if they have it. The same might be said for all mouse buttons to allow the user to configure the mouse operation to that which is most comfortable and efficient for their tasks.
|
|
1740 | QCAD (main) | Suggestion | Low | Make unprintable layers also hidden in print preview | Assigned | |
|
Task Description
Make unprintable layers also hidden in print preview
|
|
1570 | QCAD (main) | Feature Request | Low | make the stretch tool more flexible in selecting nodes | Assigned | |
1 |
Task Description
Stretching multiple points of an entity is not possible to my knowledge. I can use the stretch tool but this gives me a rectangular selection box and this limits my posibilities. For example when entities are over eachother. I hope that in the future this will become more like blender. With a freedraw selection tool and/or shift clicking multiple nodes.
|
|
849 | QCAD (main) | Feature Request | Low | Make maximum visible reference points of selection conf... | Assigned | |
1 |
Task Description
Provide configuration option to raise / lower maximum reference points that are shown for selected entities (currently fixed to 1000).
Original report:
Imported a spline-dxf from adobe illustrator. Converted the spline to polyline with explode command. Then no anchor points / vertex points / vertices were showing anymore. Simplified the polyline so that it had less than 1000 points. Vertices became visible.
I think some freeform objects need actually more than 1000 vertices. Also them need to be edited. Please increase the amount of vertices showing to biginteger
regards
Benjamin
|
|
1312 | QCAD (main) | Feature Request | Low | Make dimension label decimal separator configurable | Assigned | |
1 |
Task Description
Make dimension label decimal separator configurable (DIMDSEP).
|
|
948 | QCAD (main) | Bug Report | Low | mainwindow example segfaults | Assigned | |
|
Task Description
As far as I can tell, it never worked.
#0 0x0000000000490527 in QFormInternal::domPropertyToVariant ()
No symbol table info available.
#1 0x000000000042aea9 in QFormInternal::QAbstractFormBuilder::toVariant ()
No symbol table info available.
#2 0x00000000004498a6 in QFormInternal::QFormBuilder::applyProperties ()
No symbol table info available.
#3 0x000000000042475f in QFormInternal::FormBuilderPrivate::applyProperties ()
No symbol table info available.
#4 0x000000000042e83b in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#5 0x00000000004493c0 in QFormInternal::QFormBuilder::create ()
No symbol table info available.
#6 0x000000000042182e in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#7 0x000000000042fa37 in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#8 0x00000000004225a2 in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#9 0x0000000815eed3d7 in QFormInternal::QAbstractFormBuilder::load ()
from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#10 0x0000000815ededad in QUiLoader::load () from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#11 0x0000000815eda326 in qtscript_QUiLoader_prototype_call (context=0x813262240)
at ../../generated_cpp/com_trolltech_qt_uitools/qtscript_QUiLoader.cpp:282
_q_arg0 = (QIODevice *) 0x813fe5610
_q_arg1 = (QWidget *) 0x813ffdcd0
_q_result = (QWidget *) 0x8006e2c00
_id = <value optimized out>
_q_self = (QUiLoader *) 0x813f08d40
#12 0x0000000805fc9f78 in QScript::FunctionWrapper::proxyCall () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#13 0x0000000805ee418f in QTJSC::NativeFuncWrapper::operator() () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#14 0x0000000805eb93ee in QTJSC::Interpreter::privateExecute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#15 0x0000000805ec1ccd in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#16 0x0000000805ec1ff9 in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#17 0x0000000805fa9743 in QScriptEnginePrivate::evaluateHelper () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#18 0x0000000805faabc6 in QScriptEngine::evaluate () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#19 0x0000000800ac5aae in RScriptHandlerEcma::eval (this=0x811f435e0, script=<value optimized out>,
fileName=<value optimized out>) at RScriptHandlerEcma.cpp:855
err = {d_ptr = {d = 0x7fffffffcf50}}
#20 0x0000000800ac65c5 in RScriptHandlerEcma::doScript (this=0x811f435e0, [email protected],
arguments=<value optimized out>) at RScriptHandlerEcma.cpp:851
fi = {d_ptr = {d = 0x813f94700}}
globalObject = {d_ptr = {d = 0x813ff1240}}
contents = {static null = {<No data fields>}, static shared_null = {ref = {_q_value = 3936}, alloc = 0, size = 0,
data = 0x809bb387a, clean = 0, simpletext = 0, righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}},
static shared_empty = {ref = {_q_value = 19}, alloc = 0, size = 0, data = 0x809bb389a, clean = 0, simpletext = 0,
righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}}, d = 0x811c11800, static codecForCStrings = 0x0}
#21 0x0000000000417d13 in MainWindow (this=0x7fffffffd4b0, parent=<value optimized out>) at MainWindow.cpp:99
No locals.
#22 0x0000000000416ad9 in main (argc=1, argv=<value optimized out>) at main.cpp:35
app = <value optimized out>
window = {<QMainWindow> = {<QWidget> = {<QObject> = {_vptr$QObject = 0x4992b0, static staticMetaObject = {d = {
superdata = 0x0, stringdata = 0x809933ae0 "QObject", data = 0x809933b80, extradata = 0x809ba94c0}},
static staticMetaObjectExtraData = {objects = 0x0,
static_metacall = 0x80985cd80 <QObject::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}, d_ptr = {
d = 0x811d28600}, static staticQtMetaObject = {d = {superdata = 0x0, stringdata = 0x80993cc40 "Qt",
data = 0x809940560, extradata = 0x0}}}, <QPaintDevice> = {_vptr$QPaintDevice = 0x499478, painters = 0},
static staticMetaObject = {d = {superdata = 0x809ba94e0, stringdata = 0x808e66be0 "QWidget", data = 0x808e670c0,
extradata = 0x809282360}}, static staticMetaObjectExtraData = {objects = 0x0,
static_metacall = 0x8087899a0 <QWidget::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>},
data = 0x811d28748}, static staticMetaObject = {d = {superdata = 0x809282380, stringdata = 0x808ec04c0 "QMainWindow",
data = 0x808ec0660, extradata = 0x8092abc60}}, static staticMetaObjectExtraData = {objects = 0x8092d1880,
static_metacall = 0x808e5aaf0 <QMainWindow::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}},
documentInterface = 0x811d31600}
ret = <value optimized out>
|
|
1462 | QCAD (main) | Bug Report | Low | Mac Trackpad zoom gesture not working as expected | Assigned | |
1 |
Task Description
Hi,
I am using mac version and I have annoying issue with trackpad. I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows. Mouse wheel / two finger swipe: Scroll (Trackpad... Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around) Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page) Reverse mouse wheel direction for zoom :unticked Mouse wheel zoom factor: 1.02
Things work as expected:
Issue I am experiencing:
Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler. The mouse point remains where it is.
Workaround: Reset viewpoint with autozoom and navigate around.
Expected zoom behaviour: I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.
|
|
1801 | QCAD (main) | Performance Issue | Low | low perfomance in paper space and viewports | Assigned | |
|
Task Description
Improving the performance of the exceptional use of the processors when switching from the model to the paper space (testing with the attached file) the functionalities of the commands for the viewports are too low in the paper space.
|
|
455 | QCAD (main) | Feature Request | Low | logical operations for polylines | Assigned | |
|
Task Description
A missing feature in my work are logical operations (combine, intersect, ..) for polylines
Example: Draw some elements, select them, say combine. The result will be the outline of all elements.
|
|
720 | QCAD (main) | Feature Request | Low | Locked Blocks .... | Assigned | |
1 |
Task Description
It is nice that I can scale or rotate a block - but right now I see also a big plus in a kind of locking function for Blocks. It would be nice to have a “locked” option ad least for the scaling of blocks.
Example: Think about Clives “Radiator ‘Cover’ screen” http://www.qcad.org/rsforum/viewtopic.php?f=51&t=2060 and how you could manipulate this screen with “scale blocked blocks”
|
|
1229 | QCAD (main) | Feature Request | Low | Load last project at start | Assigned | |
|
Task Description
When starting QCAD it will open a new, untitled, page causing me to close that, click through the saving option to discard changes and then load up the project i’m working on. It would be nice to have the option for the program to start with the last used project. I checked the application preferences to see if this option was already possible as it’s common with other applications but couldn’t find it. In ‘Startup’ (the obvious place for it) there was only an option for the splash screen.
|
|
1426 | QCAD (main) | Feature Request | Very Low | Load drawings that were open when closing QCAD on start... | Assigned | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249
|
|
764 | QCAD (main) | Feature Request | Low | Links to Data sheet, Part List ... | Assigned | |
|
Task Description
Most of our drawings have a Data sheet, parts List, cutting list, description etc etc on a pdf, world or excel file.
It would be nice to have a link possibility directly in QCAD to those files what will be saved with the drawing. Like the bitmap function without displaying the files in the drawing ...
|
|
1206 | QCAD (main) | Feature Request | Low | Link drawings with each other to update layers, blocks | Assigned | |
3 |
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3410
|
|
1373 | QCAD (main) | Feature Request | Low | Line From Angle - additional option to select exisitng ... | Assigned | |
1 |
Task Description
Often I find myself clicking on an existing line to determine the angle from the property editor, then copying and pasting this info into the angle field, it would be so very useful to have an additional option in the ‘Line from Angle’ tool to be able to pick an existing entity which would automatically register and fill in the angle for me,then all I would need to do would enter the length required.
|
|
1837 | QCAD (main) | Feature Request | Low | Line bisector tool | Assigned | |
|
Task Description
Hi,
we have already this nice tool “Angle bisector”.
I would really appreciate if we could get the same function for parallel lines to place a line exactly in the center of both lines.
Thanks.
|
|
584 | QCAD (main) | Bug Report | Low | Library Items können unbrauchbar gemacht werden durch l... | Assigned | |
|
Task Description
Nach einigen Überraschungen ....
Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....
Fallbeispiel 1: Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt. Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat. Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will. In der Blocklist ist es natürlich immer noch verfügbar. In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden. Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt. Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.
Fallbeispiel 2: Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.
Fallbeispiel 3: Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....
Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?
|
|
1263 | QCAD (main) | Feature Request | Low | Library Browser: Configurable background color for icon... | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3709
|
|
1339 | QCAD (main) | Bug Report | Low | Library Browser unstoppable | Assigned | |
|
Task Description
Hi,
Even with the Application Preference, Library Browser, NO Update on Start up, the Libray Browser scans the directory, a proces that can’t be stopped or closed.
|
|
908 | QCAD (main) | Feature Request | Low | Library Browser Block Delete Function | Assigned | |
1 |
Task Description
It would be very helpful if the library browser had a delete function.
I know that this can be very risky for some people, but it is the easiest way to see clearly what you delete.
Regards Henry
|
|
719 | QCAD (main) | Feature Request | Low | Library Browser additional Function ... | Assigned | |
|
Task Description
It would be nice to get:
In the Create Library Item task → “Save as” a remember Function for the last chosen Path to save the Item ... or a default path what is the same like the settings in the Application Preferences. Right now you have to navigate again and again for every item what you will save in the same directory. If you have to save 20 items - it sacks
Also would it be nice for an easy “Clean up” to have the possibility to delete items directly in the Library Browser window. Right now you have to use extern Programs like the Windows explorer to move or delete items.
|
|
893 | QCAD (main) | Bug Report | Low | Library Browser - Edit Library Item - opens drawings al... | Assigned | |
|
Task Description
Library Browser - Edit Library Item - opens drawings always with grid.
- If I switch between opened drawings back and forth the grid will disappear .... - If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....
Just Cosmetic ...
|
|
758 | QCAD (main) | Feature Request | Low | Lengthen/Shorten tool - add additional option | Assigned | |
2 |
Task Description
When using the Lengthen/Shorten tool it would be good to have an additional option to be able to pick a point to lengthen or shorten to.
|
|
1127 | QCAD (main) | Feature Request | Low | Leaders: spline shaped | Likely to be implemented | |
1 |
Task Description
Add support for spline shaped leaders
|
|
1673 | QCAD (main) | Feature Request | Low | Layouts and Viewports: support polygonal viewports | Assigned | |
1 |
Task Description
Add support for polygonal viewports
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241
|
|
1674 | QCAD (main) | Feature Request | Low | Layouts and Viewports: duplicate layout block | Assigned | |
1 |
Task Description
Duplicate layout blocks
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241
|
|
1552 | QCAD (main) | Feature Request | Low | Layers: assign different color for printing | Assigned | |
1 |
Task Description
Original request:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4768
|
|
1009 | QCAD (main) | Feature Request | Low | Layer Order is Alphabetical vs the Order Defined Origin... | Assigned | |
|
Task Description
It would appear that when QCAD imports a DXF, it reorders the layers into alphabetical order (at least when importing R2011). I have not tested this extensively but on other programs, the order is different from alphabetical. Ideally the operator should be given a choice to order the layers as exported (assuming the DXF format remembers that) or alphabetical. This is because a drawing may have a certain stack up of layers (like a printed circuit board) and then alphabetic ordering is not useful nor desired.
|
|
1278 | QCAD (main) | Feature Request | Low | Layer list: store layer state independently of parent l... | Assigned | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3755
|
|
766 | QCAD (main) | Feature Request | Low | Layer List: Add "Lock All Layers" | Assigned | |
3 |
Task Description
To improve useability/efficiency I would like to propose the following changes/additions to the layer list:
1) Combining the show and hide button into one button.
Clicking once will hide all layers, clicking again will show them all again.
2) A “lock/unlock” button.
Clicking once will lock all layers, clicking again will unlock them all again.
Regarding the icons I suggest that instead of show both the black and grey version of the eye/lock, you could switch between them depending on the state the switch-button is in. Also the mouse-over-text could/should change with the state.
|
|
1701 | QCAD (main) | Feature Request | Low | Layer List / Block List: add filter input | Assigned | |
|
Task Description
Add text filter for layer list, block list.
|
|
1036 | QCAD (main) | Feature Request | Low | Layer list - drop down menu option | Assigned | |
|
Task Description
In the same way as the Pen tool has a drop down menu, would it be possible to have an option to configure the layer list in the same way. I am trying to create a bit more drawing space and it would be good if I could dock the layer list in the top of my window and only take up a single row space!
|
|
1851 | QCAD (main) | Suggestion | Low | Lateral surface of a cone | Assigned | |
|
Task Description
Module mise à plat d’un cone
Bonjour,
Serait il possible dans un futur d’ajouter un module de mise en plan de cone.
Une petite fenêtre sur lequel on donne par exemple : 1- Ø haut 2- angle de coupe du haut 3- hauteur du cône 4- Ø bas 5- angle du bas 6- épaisseur matière
Ce qui permettrai de sortir une mise en plan a plat de la forme
|
|
853 | QCAD (main) | Feature Request | Low | Keep selection after undo ... | Assigned | |
1 |
Task Description
If I move something and it went wrong I can easily undo the last move and start over without the need of a re-selection. If I copy something and it went wrong I can undo the last copy but I have to re-select everything again.
It would be nice to keep the once chosen selection in both “undo” situation!
Same with similar functions like rotate etc. ....
|
|
1691 | QCAD (main) | Bug Report | Very Low | Issue with Layouts after "File-Revert" | Assigned | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically. 2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .
For example can try on “flange.dxf”
|
|
498 | QCAD (main) | Bug Report | Low | issue importing from Autocad | Assigned | |
|
Task Description
There is an issue importing from Autocad: lines and quotes (both arrows and text) appear too much big (see attachment). I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick. Autocad’s dxf are opened with right line thickness but wrong quotes. Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.
|
|
714 | QCAD (main) | Bug Report | Low | Isometric view tool bar doesn`t remain ' docked'. | Assigned | |
|
Task Description
Win 7 - 64 Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.
|
|
1302 | QCAD (main) | Feature Request | Low | Isometric projection on the current layer | Assigned | |
2 |
Task Description
It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.
|
|
980 | QCAD (main) | Bug Report | Low | Isometric Projection / blocks / wrong layer are used in... | Assigned | |
|
Task Description
Isometric Projection used on a selection which contains blocks will mix up the layer affiliations. No blocks - no problems
|
|
772 | QCAD (main) | Bug Report | Low | Isometric grid: toggle buttons not updated | Assigned | |
|
Task Description
- Switch isometric grid off - Switch isometric grid on using drawing preferences - Tool buttons don’t reflect correct status
|
|
1721 | QCAD (main) | Feature Request | Low | Insert table tool | Assigned | |
4 |
Task Description
Hi Andrew,
I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)
Many thanks
Clive
|
|
228 | QCAD (main) | Feature Request | Low | Insert current date (and other fields) | Assigned | |
2 |
Task Description
Insert field into drawing that displays current date, file name, ...
|
|
1287 | QCAD (main) | Feature Request | Low | Information tool shows absolute units in print preview | Assigned | |
1 |
Task Description
With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units. So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.
See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793
|